From: Patrick Delaunay Date: Fri, 5 Jul 2019 15:20:12 +0000 (+0200) Subject: dt-bindings: pinctrl: stm32: add new entry for package information X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=d3f077b3490bcf4f202d85a195cede591f6f3995;p=u-boot.git dt-bindings: pinctrl: stm32: add new entry for package information Add "st,package" entry. Possibles values are: -STM32MP_PKG_AA for LFBGA448 (18*18) package -STM32MP_PKG_AB for LFBGA354 (16*16) package -STM32MP_PKG_AC for TFBGA361 (12*12) package -STM32MP_PKG_AD for TFBGA257 (10*10) package see Linux commit 966d9b928f626a54a0c27c0fdae1e3dfe9bab416 for v5.2-rc1 Signed-off-by: Patrick Delaunay --- diff --git a/doc/device-tree-bindings/pinctrl/st,stm32-pinctrl.txt b/doc/device-tree-bindings/pinctrl/st,stm32-pinctrl.txt index c41ae91f7a..00169255e4 100644 --- a/doc/device-tree-bindings/pinctrl/st,stm32-pinctrl.txt +++ b/doc/device-tree-bindings/pinctrl/st,stm32-pinctrl.txt @@ -8,8 +8,13 @@ controllers onto these pads. Pin controller node: Required properies: - compatible: value should be one of the following: - (a) "st,stm32f429-pinctrl" - (b) "st,stm32f746-pinctrl" + "st,stm32f429-pinctrl" + "st,stm32f469-pinctrl" + "st,stm32f746-pinctrl" + "st,stm32f769-pinctrl" + "st,stm32h743-pinctrl" + "st,stm32mp157-pinctrl" + "st,stm32mp157-z-pinctrl" - #address-cells: The value of this property must be 1 - #size-cells : The value of this property must be 1 - ranges : defines mapping between pin controller node (parent) to @@ -32,13 +37,30 @@ Required properties: Optional properties: - reset: : Reference to the reset controller - - interrupt-parent: phandle of the interrupt parent to which the external - GPIO interrupts are forwarded to. - - st,syscfg: Should be phandle/offset pair. The phandle to the syscon node - which includes IRQ mux selection register, and the offset of the IRQ mux - selection register. + - st,syscfg: Should be phandle/offset/mask. + -The phandle to the syscon node which includes IRQ mux selection register. + -The offset of the IRQ mux selection register + -The field mask of IRQ mux, needed if different of 0xf. + - gpio-ranges: Define a dedicated mapping between a pin-controller and + a gpio controller. Format is <&phandle a b c> with: + -(phandle): phandle of pin-controller. + -(a): gpio base offset in range. + -(b): pin base offset in range. + -(c): gpio count in range + This entry has to be used either if there are holes inside a bank: + GPIOB0/B1/B2/B14/B15 (see example 2) + or if banks are not contiguous: + GPIOA/B/C/E... + NOTE: If "gpio-ranges" is used for a gpio controller, all gpio-controller + have to use a "gpio-ranges" entry. + More details in Documentation/devicetree/bindings/gpio/gpio.txt. + - st,bank-ioport: should correspond to the EXTI IOport selection (EXTI line + used to select GPIOs as interrupts). + - hwlocks: reference to a phandle of a hardware spinlock provider node. + - st,package: Indicates the SOC package used. + More details in include/dt-bindings/pinctrl/stm32-pinfunc.h -Example: +Example 1: #include ... @@ -60,6 +82,43 @@ Example: pin-functions nodes follow... }; +Example 2: +#include +... + + pinctrl: pin-controller { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,stm32f429-pinctrl"; + ranges = <0 0x40020000 0x3000>; + pins-are-numbered; + + gpioa: gpio@40020000 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x0 0x400>; + resets = <&reset_ahb1 0>; + st,bank-name = "GPIOA"; + gpio-ranges = <&pinctrl 0 0 16>; + }; + + gpiob: gpio@40020400 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x0 0x400>; + resets = <&reset_ahb1 0>; + st,bank-name = "GPIOB"; + ngpios = 4; + gpio-ranges = <&pinctrl 0 16 3>, + <&pinctrl 14 30 2>; + }; + + + ... + pin-functions nodes follow... + }; + + Contents of function subnode node: ---------------------------------- Subnode format @@ -83,14 +142,31 @@ Required properties: - port: The gpio port index (PA = 0, PB = 1, ..., PK = 11) - line: The line offset within the port (PA0 = 0, PA1 = 1, ..., PA15 = 15) - function: The function number, can be: - * 0 : GPIO IN + * 0 : GPIO * 1 : Alternate Function 0 * 2 : Alternate Function 1 * 3 : Alternate Function 2 * ... * 16 : Alternate Function 15 * 17 : Analog - * 18 : GPIO OUT + + To simplify the usage, macro is available to generate "pinmux" field. + This macro is available here: + - include/dt-bindings/pinctrl/stm32-pinfunc.h + + Some examples of using macro: + /* GPIO A9 set as alernate function 2 */ + ... { + pinmux = ; + }; + /* GPIO A9 set as GPIO */ + ... { + pinmux = ; + }; + /* GPIO A9 set as analog */ + ... { + pinmux = ; + }; Optional properties: - GENERIC_PINCONFIG: is the generic pinconfig options to use. @@ -114,13 +190,13 @@ pin-controller { ... usart1_pins_a: usart1@0 { pins1 { - pinmux = ; + pinmux = ; bias-disable; drive-push-pull; slew-rate = <0>; }; pins2 { - pinmux = ; + pinmux = ; bias-disable; }; }; @@ -129,5 +205,4 @@ pin-controller { &usart1 { pinctrl-0 = <&usart1_pins_a>; pinctrl-names = "default"; - status = "okay"; }; diff --git a/include/dt-bindings/pinctrl/stm32-pinfunc.h b/include/dt-bindings/pinctrl/stm32-pinfunc.h index b5a2174a63..e6fb8ada3f 100644 --- a/include/dt-bindings/pinctrl/stm32-pinfunc.h +++ b/include/dt-bindings/pinctrl/stm32-pinfunc.h @@ -32,5 +32,11 @@ #define STM32_PINMUX(port, line, mode) (((PIN_NO(port, line)) << 8) | (mode)) +/* package information */ +#define STM32MP_PKG_AA 0x1 +#define STM32MP_PKG_AB 0x2 +#define STM32MP_PKG_AC 0x4 +#define STM32MP_PKG_AD 0x8 + #endif /* _DT_BINDINGS_STM32_PINFUNC_H */