From: Han Pengfei Date: Thu, 12 Mar 2015 03:13:02 +0000 (+0800) Subject: sun6i: Add support for the Mixtile LOFT-Q board X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=d3aa051e7a29352aacb35d5392f3420d107e0f5a;p=u-boot.git sun6i: Add support for the Mixtile LOFT-Q board The Mixtile LOFT-Q is an A31 based board with 2G RAM, 8G EMMC, sdio wifi, 1Gbit ethernet, HDMI display, toslink audio plug, 4 USB2.0 port, external USB2SATA connector, sd card plug, 3x60 external fpic expansion connector, NXP JN5168 zigbee gw, remote support. Also see http://focalcrest.com/en/pc.html#pro02 Signed-off-by: Han Pengfei Acked-by: Hans de Goede Signed-off-by: Hans de Goede --- diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS index be4821360f..9e7064518a 100644 --- a/board/sunxi/MAINTAINERS +++ b/board/sunxi/MAINTAINERS @@ -120,6 +120,11 @@ M: Ian Campbell S: Maintained F: configs/Mele_M5_defconfig +MIXTILE-LOFTQ BOARD +M: Phil Han +S: Maintained +F: configs/mixtile_loftq_defconfig + MK808C BOARD M: Marcus Cooper S: Maintained diff --git a/configs/mixtile_loftq_defconfig b/configs/mixtile_loftq_defconfig new file mode 100644 index 0000000000..47453cd362 --- /dev/null +++ b/configs/mixtile_loftq_defconfig @@ -0,0 +1,21 @@ +# The Mixtile LOFT-Q is an A31 based board with 2G RAM, 8G EMMC, sdio wifi, +# 1Gbit ethernet, HDMI display, toslink audio plug, 4 USB2.0 port, external +# USB2SATA connector, sd card plug, 3x60 external fpic expansion connector, +# NXP JN5168 zigbee gw, remote support. +# +# Also see http://focalcrest.com/en/pc.html#pro02 +CONFIG_SPL=y +CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPA(21)" +CONFIG_ARM=y +CONFIG_ARCH_SUNXI=y +CONFIG_MACH_SUN6I=y +CONFIG_DRAM_CLK=312 +CONFIG_DRAM_ZQ=251 +CONFIG_MMC_SUNXI_SLOT=0 +CONFIG_MMC_SUNXI_SLOT_EXTRA=2 +# Wifi power +CONFIG_AXP221_ALDO1_VOLT=3300 +# Vbus gpio for usb1 +CONFIG_USB1_VBUS_PIN="PH24" +# No Vbus gpio for usb2 +CONFIG_USB2_VBUS_PIN=""