From: Wolfgang Denk Date: Wed, 9 Jan 2008 23:55:14 +0000 (+0100) Subject: Coding Style cleanup; update CHANGELOG X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=d3a6532cbe263d992f49e86ac95bede28e96f9c8;p=u-boot.git Coding Style cleanup; update CHANGELOG Signed-off-by: Wolfgang Denk --- diff --git a/CHANGELOG b/CHANGELOG index 43c0bd5bcc..7b9e34bdd1 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -1,3 +1,297 @@ +commit 17a41e4492121ccf9fa2c10c2cb1a6d1c18d74f7 +Author: Kim Phillips +Date: Wed Jan 9 16:56:54 2008 -0600 + + Add QE brg freq and correct qe bus freq fdt update code + + Signed-off-by: Kim Phillips + Signed-off-by: Andy Fleming + +commit 890dfef06c2d169a3356359596890754dfb8ee1c +Author: Andy Fleming +Date: Wed Jan 9 16:34:51 2008 -0600 + + Remove cache config from ATUM8548 and sbc8548 configs + + These boards weren't updated by Kumar's config patch because they + weren't in the tree, yet. + + Signed-off-by: Andy Fleming + +commit b8ec2385038c094b07ec5b49336289a46b6e9cc6 +Author: Timur Tabi +Date: Mon Jan 7 13:31:19 2008 -0600 + + 85xx: add ability to upload QE firmware + + Define the layout of a binary blob that contains a QE firmware and instructions + on how to upload it. Add function qe_upload_firmware() to parse the blob and + perform the actual upload. Add command-line command "qe fw" to take a firmware + blob in memory and upload it. Update ft_cpu_setup() on 85xx to create the + 'firmware' device tree node if U-Boot has uploaded a firmware. Fully define + 'struct rsp' in immap_qe.h to include the actual RISC Special Registers. + + Signed-off-by: Timur Tabi + +commit b009f3eca99bb7b9e6ba6639a8909a138dd5e9fe +Author: Kumar Gala +Date: Tue Jan 8 01:22:21 2008 -0600 + + 85xx: Remove cache config from configs.h + + Either use the standard defines in asm/cache.h or grab the information + at runtime from the L1CFG SPR. + + Also, minor cleanup in cache.h to make the code a bit more readable. + + Signed-off-by: Kumar Gala + +commit b964e9368f45372aaf1da0c13fe56f6d81ae8e96 +Author: robert lazarski +Date: Fri Dec 21 10:39:27 2007 -0500 + + mpc85xx: Add support for ATUM8548 (updated) + + Add support for Instituto Atlantico's ATUM8548 board + + Signed-off-by: robert lazarski + Signed-off-by: Andy Fleming + +commit 7bd6104b71de9bca80ac8e0936003443bb42f2fc +Author: robert lazarski +Date: Fri Dec 21 10:36:37 2007 -0500 + + mpc85xx: Add support for ATUM8548 (updated) + + Add support for Instituto Atlantico's ATUM8548 board + + Signed-off-by: robert lazarski + +commit 9e3ed392d2c8965e24c942b58796c31c644c2f70 +Author: Joe Hamman +Date: Thu Dec 13 06:45:14 2007 -0600 + + mpc85xx: Add support for SBC8548 (updated) + + Add support for Wind River's SBC8548 reference board. + + Signed-off by: Joe Hamman + +commit 11c45ebd46d6517b51b7a92dd52a618b2f4e5586 +Author: Joe Hamman +Date: Thu Dec 13 06:45:08 2007 -0600 + + mpc85xx: Add support for SBC8548 (updated) + + Add support for Wind River's SBC8548 reference board. + + Signed-off by: Joe Hamman + Signed-off by: Andy Fleming + +commit 64d4bcb087c2ece1c4d0de8efe85e0075e5b1594 +Author: Anton Vorontsov +Date: Mon Oct 22 19:58:19 2007 +0400 + + MPC8568E-MDS: set up QE pario for UART1 + + To use UART1 on the MPC8568E-MDS, QE pario pins PC[0:3] should + be set up appropriately. + + Signed-off-by: Anton Vorontsov + +commit ad162249cb371e9e38971676f09be791e5f3cf4a +Author: Anton Vorontsov +Date: Mon Oct 22 18:12:46 2007 +0400 + + MPC8568E-MDS: reset UCCs to use them reliably + + In order to use GETH1 and GETH2 on the MPC8568E-MDS, we should reset + UCCs. + + p.s Similar code exists in the Linux kernel board file (for capability + reasons with older U-Boots), but should be removed some day. + + Signed-off-by: Anton Vorontsov + +commit 2146cf56821c3364786ca94a7306008c5824b238 +Author: Kumar Gala +Date: Wed Dec 19 01:18:15 2007 -0600 + + Reworked FSL Book-E TLB macros to be more readable + + The old macros made it difficult to know what WIMGE and perm bits + were set for a TLB entry. Actually use the bit masks for these items + since they are only a single bit. + + Also moved the macros into mmu.h out of e500.h since they aren't specific + to e500. + + Signed-off-by: Kumar Gala + +commit 1d47273d46925929f8f2c1913cd96d7257aade88 +Author: Kumar Gala +Date: Tue Dec 18 23:21:51 2007 -0600 + + Use FSL Book-E MMU macros from Linux Kernel + + Grab the FSL Book-E MAS register macros from Linux. Also added + defines for page sizes up to 4TB and removed SHAREN since it doesnt + really exist. + + Signed-off-by: Kumar Gala + +commit 02df4a270f817ef6ec39047a01b55fecdc5f3b37 +Author: Andy Fleming +Date: Wed Jan 9 13:51:32 2008 -0600 + + Fix my own merge stupidity + + Way back in August I merged Heiko's patch: + 566a494f592: [PCS440EP] upgrade the PCS440EP board + + with Jon's CONFIG_COMMANDS patches. + + This was done in commit: 6bf6f114dcdd97ec3f80c2761ed40e31229d6b78 + + However, in the process, I left out some of Heiko's good changes. + + Now Heiko's and Jon's patches are properly merged in fat_register_device() + + Signed-off-by: Andy Fleming + +commit 6636b62a6efc7f14e6e788788631ae7a7fca4537 +Author: James Yang +Date: Wed Jan 9 11:17:49 2008 -0600 + + Expose parse_line() globally. + + Add new function readline_into_buffer() that allows the + output of readline to be put into a pointer to char buffer. + + This refactoring allows other functions besides the + main command loop to also use the same input mechanism. + + Signed-off-by: James Yang + Acked-by: Jon Loeliger + +commit 7ca90513486abd4ae50bd1b7403f47cc58c5ad25 +Author: Guennadi Liakhovetski +Date: Wed Jan 9 01:15:25 2008 +0100 + + trivial: fix consequences of a bad merge + + Fix what looks like a merge artifact. + + Signed-off-by: Guennadi Liakhovetski + +commit 4785a694c0045996ccf0ac5b8edf531efc1b730e +Author: Zhang Wei +Date: Thu Jan 3 10:51:15 2008 +0800 + + Add Ctrl combo key support to usb keyboard driver. + + Ctrl combo key support is added, which is very useful to input Ctrl-C + for interrupt current job. + Also add usb_event_poll() calling to usb_kbd_testc(), which can get + key input when tstc() is called. + + Signed-off-by: Zhang Wei + +commit 10c7382bc5d5e64c47f94ac2ca78cc574442e82d +Author: Marcel Ziswiler +Date: Sun Dec 30 03:30:56 2007 +0100 + + fix various comments + + Signed-off-by: Marcel Ziswiler + +commit 7817cb2083d982923752fe0f12b67c0e7c09a027 +Author: Marcel Ziswiler +Date: Sun Dec 30 03:30:46 2007 +0100 + + fix comments with new drivers organization + + Signed-off-by: Marcel Ziswiler + +commit a9b410dc7d2a4721c408b13abfc037988150f145 +Author: Shinya Kuribayashi +Date: Fri Dec 28 12:50:59 2007 +0900 + + Remove the obsolete terse version of do_mii() + + We now have more useful version of do_mii() and everybody use it. + Gerald Van Baren says: + + > When I originally wrote the mii command 6(!) years ago, I wrote a + > verbose version that printed human readable decomposition of the flags, + > etc., and a terse one that didn't print as much stuff and thus had a + > smaller memory footprint. + > + > It sounds like the terse version has withered and died, apparently + > people are only using the verbose version (which is very understandable, + > I do myself). + + Signed-off-by: Shinya Kuribayashi + Signed-off-by: Gerald Van Baren + +commit 01c687aa6e065bd4faf80f723361e798941dd6b0 +Author: Mike Frysinger +Date: Thu Dec 27 13:42:56 2007 -0500 + + Do not reference sha1.c when building mkimage. + + remove sha1.o from mkimage linking since it isn't actually used. + + Signed-Off-By: Mike Frysinger + +commit b9173af73e524d37c812f210173cf83385c5171a +Author: Shinya Kuribayashi +Date: Thu Dec 27 15:39:54 2007 +0900 + + common/cmd_mii.c: Add sanity argc check + + If type mii command without arguments, we suffer from uninitialized argv[] + entries; for example we MIPS get stuck by TLB error. + + Signed-off-by: Shinya Kuribayashi + +commit 500856eb1707ed17d9204baa61dd59948d3b2899 +Author: Rafal Jaworowski +Date: Wed Jan 9 19:39:36 2008 +0100 + + API for external applications. + + This is an API for external (standalone) applications running on top of + U-Boot, and is meant to be more extensible and robust than the existing + jumptable mechanism. It is similar to UNIX syscall approach. See api/README + for more details. + + Included is the demo application using this new framework (api_examples). + + Please note this is still an experimental feature, and is turned off by + default. + + Signed-off-by: Rafal Jaworowski + +commit 26a41790f8eba19ad450e18ae91351daf485b3e2 +Author: Rafal Jaworowski +Date: Wed Jan 9 18:05:27 2008 +0100 + + Globalize envmatch() + + The newly introduced API (routines related to env vars) will need to call + it. + + Signed-off-by: Rafal Zabdyr + +commit 6007f3251c0967adc13f2ed8be1b924ddc30124d +Author: Wolfgang Denk +Date: Wed Jan 9 15:14:46 2008 +0100 + + Coding Style cleanup, update CHANGELOG + + Signed-off-by: Wolfgang Denk + commit fc6414eca55f1fc108fb12fc8cdc43bd8b4463f9 Author: Mike Frysinger Date: Tue Dec 18 04:29:55 2007 -0500 @@ -98,6 +392,20 @@ Date: Tue Nov 20 13:14:20 2007 +0100 Signed-off-by: Guennadi Liakhovetski +commit 58694f9709c0c3e3178e349ae748d98cfb0c639a +Author: Zhang Wei +Date: Thu Jan 3 10:51:15 2008 +0800 + + Add Ctrl combo key support to usb keyboard driver. + + Ctrl combo key support is added, which is very useful to input Ctrl-C + for interrupt current job. + Also add usb_event_poll() calling to usb_kbd_testc(), which can get + key input when tstc() is called. + + Signed-off-by: Zhang Wei + Signed-off-by: Markus Klotzbuecher + commit 07eb02687f008721974a2fb54cd7fdc28033ab3c Author: Wolfgang Denk Date: Wed Jan 9 13:43:38 2008 +0100 @@ -411,6 +719,28 @@ Date: Tue Jan 8 11:13:09 2008 +0100 Signed-off-by: Matthias Fuchs +commit c83d7ca4dadd44ae430235077f63b64a11f36f6e +Author: Wolfgang Denk +Date: Tue Jan 8 22:58:27 2008 +0100 + + Fix compile problem with new env code. + + Signed-off-by: Wolfgang Denk + +commit 6de66b35426312a21174a9bf0576a094e2904bea +Author: Markus Klotzbücher +Date: Tue Nov 27 10:23:20 2007 +0100 + + tools: fix fw_printenv tool to compile again + + This patch updates the fw_printenv/fw_setenv userspace tool to include + the correct MTD header in order to compile against current kernel + headers. Backward compatibility is preserved by introducing an option + MTD_VERSION which can be set to "old" for compilation using the old MTD + headers. Along with this a number of warnings are fixed. + + Signed-off-by: Markus Klotzbuecher + commit ad3006fe7e84667021753b74247b0bafd97ba35f Author: Gerald Van Baren Date: Mon Jan 7 23:47:32 2008 -0500 @@ -4521,6 +4851,48 @@ Date: Wed Oct 3 07:34:10 2007 +0200 Signed-off-by: Stefan Roese +commit 245a362ad3c0c1b84fccc9fec7b623eb14f6e502 +Author: Marian Balakowicz +Date: Wed Oct 24 01:37:36 2007 +0200 + + TQM5200: Call usb_cpu_init() during board init + + usb_cpu_init() configures GPS USB pins, clocks, etc. and + is required for proper operation of kernel USB subsystem. + This setup was previously done in the kernel by the fixup + code which is being removed, thus low level init must be + done by U-boot now. + + Signed-off-by: Marian Balakowicz + Signed-off-by: Markus Klotzbuecher + +commit b5af773f8d92677e06f3295b45557c9d0a487c24 +Author: Zhang Wei +Date: Thu Oct 25 17:51:27 2007 +0800 + + Fix the issue of usb_kbd driver missing the scan code of key 'z'. + + The scan code of the key 'z' is 0x1d, which should be handled. + + The change has be tested on NOVATEK USB keyboard and ULI PCI OHCI + controller. + + Signed-off-by: Zhang Wei + Signed-off-by: Markus Klotzbuecher + +commit 85ac988e86f9414fa645b0148dc66c3520a1eb84 +Author: Rodolfo Giometti +Date: Mon Oct 15 11:59:17 2007 +0200 + + PXA USB OHCI: "usb stop" implementation. + + Some USB keys need to be switched off before loading the kernel + otherwise they can remain in an undefined status which prevents them + to be correctly recognized by the kernel. + + Signed-off-by: Rodolfo Giometti + Signed-off-by: Markus Klotzbuecher + commit 31548249decf18a6b877a18436b6139dd483fe4a Author: Justin Flammia Date: Mon Oct 29 17:40:35 2007 -0400 diff --git a/api/README b/api/README index c8f9c457c4..6df225f584 100644 --- a/api/README +++ b/api/README @@ -22,7 +22,7 @@ U-Boot machine/arch independent API for external apps - the U-Boot integral part of the API is meant to be thin and non-intrusive, leaving as much processing as possible on the consumer application side, for example it doesn't keep states, but relies on hints from the app and - so on + so on - optional (CONFIG_API) diff --git a/api/api.c b/api/api.c index 10f83eb691..0598d9082d 100644 --- a/api/api.c +++ b/api/api.c @@ -231,7 +231,7 @@ static int API_dev_enum(va_list ap) /* start over - clean up enumeration */ dev_enum_reset(); /* XXX shouldn't the name contain 'stor'? */ debugf("RESTART ENUM\n"); - + /* net device enumeration first */ if (dev_enum_net(di)) return 0; @@ -365,7 +365,7 @@ static int API_dev_write(va_list ap) return API_EINVAL; if (di->type & DEV_TYP_STOR) - /* + /* * write to storage is currently not supported by U-Boot: * no storage device implements block_write() method */ @@ -523,7 +523,7 @@ static int API_env_enum(va_list ap) char *last, **next; last = (char *)va_arg(ap, u_int32_t); - + if ((next = (char **)va_arg(ap, u_int32_t)) == NULL) return API_EINVAL; @@ -540,7 +540,7 @@ static int API_env_enum(va_list ap) return 0; } } - + if (envmatch((uchar *)last, i) < 0) continue; @@ -567,7 +567,7 @@ static cfp_t calls_table[API_MAXCALL] = { NULL, }; * serviced until finished. * * e.g. syscall(1, int *, u_int32_t, u_int32_t, u_int32_t, u_int32_t); - * + * * call: syscall number * * retval: points to the return value placeholder, this is the place the @@ -655,7 +655,7 @@ void platform_set_mr(struct sys_info *si, unsigned long start, unsigned long siz if (!si->mr || !size || (flags == 0)) return; - + /* find free slot */ for (i = 0; i < si->mr_no; i++) if (si->mr[i].flags == 0) { diff --git a/api/api_net.c b/api/api_net.c index 9b20a1740c..9611ab0dda 100644 --- a/api/api_net.c +++ b/api/api_net.c @@ -75,7 +75,7 @@ int dev_close_net(void *cookie) return 0; } -/* +/* * There can only be one active eth interface at a time - use what is * currently set to eth_current */ diff --git a/api_examples/Makefile b/api_examples/Makefile index 5812bcd337..cb49a9ea79 100644 --- a/api_examples/Makefile +++ b/api_examples/Makefile @@ -71,7 +71,7 @@ $(BIN): $(obj)%.bin: $(obj)% $(OBJCOPY) -O binary $< $@ 2>/dev/null -$(obj)crc32.c: +$(obj)crc32.c: @rm -f $(obj)crc32.c ln -s $(src)../lib_generic/crc32.c $(obj)crc32.c diff --git a/api_examples/demo.c b/api_examples/demo.c index a4aeef183b..eae9712b71 100644 --- a/api_examples/demo.c +++ b/api_examples/demo.c @@ -88,7 +88,7 @@ int main(int argc, char *argv[]) /* enumerate devices */ printf("\n*** Enumerate devices ***\n"); devs_no = ub_dev_enum(); - + printf("Number of devices found: %d\n", devs_no); if (devs_no == 0) return -1; diff --git a/api_examples/glue.c b/api_examples/glue.c index 75983691fd..2bf47ae3d2 100644 --- a/api_examples/glue.c +++ b/api_examples/glue.c @@ -150,7 +150,7 @@ struct sys_info * ub_get_sys_info(void) * timing * ****************************************/ - + void ub_udelay(unsigned long usec) { syscall(API_UDELAY, NULL, &usec); @@ -298,7 +298,7 @@ int ub_dev_read(int handle, void *buf, lbasize_t len, lbastart_t start) if (!syscall(API_DEV_READ, &err, di, buf, &len, &start, &act_len)) return -1; - if (err) + if (err) return err; if (act_len != len) diff --git a/board/atum8548/atum8548.c b/board/atum8548/atum8548.c index 4d7dc7728c..f11abd816b 100644 --- a/board/atum8548/atum8548.c +++ b/board/atum8548/atum8548.c @@ -140,7 +140,7 @@ testdram(void) for (p = pstart; p < pend; p++) { printf ("DRAM test attempting to write 0xaaaaaaaa at: %08x\n", (uint) p); *p = 0xaaaaaaaa; - } + } for (p = pstart; p < pend; p++) { if (*p != 0xaaaaaaaa) { @@ -191,7 +191,7 @@ pci_init_board(void) debug (" pci_init_board: devdisr=%x, io_sel=%x, host_agent=%x\n", devdisr, io_sel, host_agent); - /* explicitly set 'Clock out select register' to echo SYSCLK input to our CPLD */ + /* explicitly set 'Clock out select register' to echo SYSCLK input to our CPLD */ gur->clkocr |= MPC85xx_ATUM_CLKOCR; if (io_sel & 1) { @@ -376,7 +376,7 @@ pci_init_board(void) int last_stage_init(void) { - int ic = icache_status (); + int ic = icache_status (); printf ("icache_status: %d\n", ic); return 0; } diff --git a/board/atum8548/init.S b/board/atum8548/init.S index a410e2e568..654a569907 100644 --- a/board/atum8548/init.S +++ b/board/atum8548/init.S @@ -70,7 +70,7 @@ tlb1_entry: /* * Number of TLB0 and TLB1 entries in the following table */ - .long (2f-1f)/16 + .long (2f-1f)/16 1: #if (CFG_CCSRBAR_DEFAULT != CFG_CCSRBAR) @@ -182,15 +182,15 @@ tlb1_entry: /* * LAW(Local Access Window) configuration: * - * 0x0000_0000 0x7fff_ffff DDR 2G - * 0x8000_0000 0x9fff_ffff PCI1 MEM 512M - * 0xa000_0000 0xbfff_ffff PCIe MEM 512M - * 0xc000_0000 0xdfff_ffff PCI2 MEM 512M - * 0xe000_0000 0xe000_ffff CCSR 1M - * 0xe200_0000 0xe10f_ffff PCI1 IO 1M - * 0xe280_0000 0xe20f_ffff PCI2 IO 1M - * 0xe300_0000 0xe30f_ffff PCIe IO 1M - * 0xf800_0000 0xffff_ffff FLASH (boot bank) 128M + * 0x0000_0000 0x7fff_ffff DDR 2G + * 0x8000_0000 0x9fff_ffff PCI1 MEM 512M + * 0xa000_0000 0xbfff_ffff PCIe MEM 512M + * 0xc000_0000 0xdfff_ffff PCI2 MEM 512M + * 0xe000_0000 0xe000_ffff CCSR 1M + * 0xe200_0000 0xe10f_ffff PCI1 IO 1M + * 0xe280_0000 0xe20f_ffff PCI2 IO 1M + * 0xe300_0000 0xe30f_ffff PCIe IO 1M + * 0xf800_0000 0xffff_ffff FLASH (boot bank) 128M * * Notes: * CCSRBAR and L2-as-SRAM don't need a configured Local Access Window. @@ -227,7 +227,7 @@ law_entry: .long (CFG_PCIE1_IO_PHYS>>12) & 0xfffff .long LAWAR_EN | LAWAR_TRGT_PCIE | (LAWAR_SIZE & LAWAR_SIZE_1M) - /* LBC window - maps 256M 0xf0000000 -> 0xffffffff */ + /* LBC window - maps 256M 0xf0000000 -> 0xffffffff */ .long (CFG_LBC_CACHE_BASE>>12) & 0xfffff .long LAWAR_EN | LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_256M) diff --git a/board/sbc8548/sbc8548.c b/board/sbc8548/sbc8548.c index 5e258f5d69..65052e60c8 100644 --- a/board/sbc8548/sbc8548.c +++ b/board/sbc8548/sbc8548.c @@ -566,4 +566,3 @@ ft_board_setup(void *blob, bd_t *bd) #endif } #endif - diff --git a/drivers/qe/qe.c b/drivers/qe/qe.c index 276788c857..c802014a50 100644 --- a/drivers/qe/qe.c +++ b/drivers/qe/qe.c @@ -35,7 +35,7 @@ DECLARE_GLOBAL_DATA_PTR; void qe_issue_cmd(uint cmd, uint sbc, u8 mcn, u32 cmd_data) { - u32 cecr; + u32 cecr; if (cmd == QE_RESET) { out_be32(&qe_immr->cp.cecr,(u32) (cmd | QE_CR_FLG)); @@ -357,10 +357,10 @@ int qe_upload_firmware(const struct qe_firmware *firmware) return -EPERM; } - /* - * Validate the CRC. We would normally call crc32_no_comp(), but that - * function isn't available unless you turn on JFFS support. - */ + /* + * Validate the CRC. We would normally call crc32_no_comp(), but that + * function isn't available unless you turn on JFFS support. + */ crc = be32_to_cpu(*(u32 *)((void *)firmware + calc_size)); if (crc != (crc32(-1, (const void *) firmware, calc_size) ^ -1)) { printf("Firmware CRC is invalid\n"); @@ -438,10 +438,10 @@ static int qe_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) return -EINVAL; } - /* - * If a length was supplied, compare that with the 'length' - * field. - */ + /* + * If a length was supplied, compare that with the 'length' + * field. + */ if (argc > 3) { ulong length = simple_strtoul(argv[3], NULL, 16);