From: Pali Rohár Date: Fri, 6 May 2022 09:05:16 +0000 (+0200) Subject: serial: ns16550: Add support for SPL_DEBUG_UART_BASE X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=d293759d55cce9c3efccf96ca8423008c9d0293b;p=u-boot.git serial: ns16550: Add support for SPL_DEBUG_UART_BASE Use CONFIG_VAL(DEBUG_UART_BASE) instead of CONFIG_DEBUG_UART_BASE, so proper config value (CONFIG_DEBUG_UART_BASE or CONFIG_SPL_DEBUG_UART_BASE) is used based on building target. Signed-off-by: Pali Rohár Reviewed-by: Stefan Roese --- diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c index a4220fd0ae..78bfe6281c 100644 --- a/drivers/serial/ns16550.c +++ b/drivers/serial/ns16550.c @@ -325,7 +325,7 @@ int ns16550_tstc(struct ns16550 *com_port) static inline void _debug_uart_init(void) { - struct ns16550 *com_port = (struct ns16550 *)CONFIG_DEBUG_UART_BASE; + struct ns16550 *com_port = (struct ns16550 *)CONFIG_VAL(DEBUG_UART_BASE); int baud_divisor; /* @@ -360,7 +360,7 @@ static inline int NS16550_read_baud_divisor(struct ns16550 *com_port) static inline void _debug_uart_putc(int ch) { - struct ns16550 *com_port = (struct ns16550 *)CONFIG_DEBUG_UART_BASE; + struct ns16550 *com_port = (struct ns16550 *)CONFIG_VAL(DEBUG_UART_BASE); while (!(serial_din(&com_port->lsr) & UART_LSR_THRE)) { #ifdef CONFIG_DEBUG_UART_NS16550_CHECK_ENABLED