From: Simon Glass Date: Mon, 21 Jan 2019 21:53:24 +0000 (-0700) Subject: rockchip: Bring in device tree files for rk3399-gru X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=d244474f38dad6aa3b3b046e0ddde7173b7a9f27;p=u-boot.git rockchip: Bring in device tree files for rk3399-gru Bring in these files from Linux v4.20. Signed-off-by: Simon Glass Reviewed-by: Philipp Tomsich --- diff --git a/arch/arm/dts/rk3399-gru-bob.dts b/arch/arm/dts/rk3399-gru-bob.dts new file mode 100644 index 0000000000..1ee0dc0d9f --- /dev/null +++ b/arch/arm/dts/rk3399-gru-bob.dts @@ -0,0 +1,79 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Gru-Bob Rev 4+ board device tree source + * + * Copyright 2018 Google, Inc + */ + +/dts-v1/; +#include "rk3399-gru-chromebook.dtsi" + +/ { + model = "Google Bob"; + compatible = "google,bob-rev13", "google,bob-rev12", + "google,bob-rev11", "google,bob-rev10", + "google,bob-rev9", "google,bob-rev8", + "google,bob-rev7", "google,bob-rev6", + "google,bob-rev5", "google,bob-rev4", + "google,bob", "google,gru", "rockchip,rk3399"; + + edp_panel: edp-panel { + compatible = "boe,nv101wxmn51", "simple-panel"; + backlight = <&backlight>; + power-supply = <&pp3300_disp>; + + ports { + panel_in_edp: endpoint { + remote-endpoint = <&edp_out_panel>; + }; + }; + }; +}; + +&ap_i2c_ts { + touchscreen: touchscreen@10 { + compatible = "elan,ekth3500"; + reg = <0x10>; + interrupt-parent = <&gpio3>; + interrupts = <13 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&touch_int_l &touch_reset_l>; + reset-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>; + }; +}; + +&ap_i2c_tp { + trackpad: trackpad@15 { + compatible = "elan,ekth3000"; + reg = <0x15>; + interrupt-parent = <&gpio1>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&trackpad_int_l>; + wakeup-source; + }; +}; + +&backlight { + pwms = <&cros_ec_pwm 0>; +}; + +&cpu_alert0 { + temperature = <65000>; +}; + +&cpu_alert1 { + temperature = <70000>; +}; + +&spi0 { + status = "okay"; +}; + +&pinctrl { + tpm { + h1_int_od_l: h1-int-od-l { + rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; +}; diff --git a/arch/arm/dts/rk3399-gru-chromebook.dtsi b/arch/arm/dts/rk3399-gru-chromebook.dtsi new file mode 100644 index 0000000000..ff81dfda3b --- /dev/null +++ b/arch/arm/dts/rk3399-gru-chromebook.dtsi @@ -0,0 +1,397 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Gru-Chromebook shared properties + * + * Copyright 2018 Google, Inc + */ + +#include "rk3399-gru.dtsi" + +/ { + pp900_ap: pp900-ap { + compatible = "regulator-fixed"; + regulator-name = "pp900_ap"; + + /* EC turns on w/ pp900_ap_en; always on for AP */ + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + vin-supply = <&ppvar_sys>; + }; + + /* EC turns on w/ pp900_usb_en */ + pp900_usb: pp900-ap { + }; + + /* EC turns on w/ pp900_pcie_en */ + pp900_pcie: pp900-ap { + }; + + pp3000: pp3000 { + compatible = "regulator-fixed"; + regulator-name = "pp3000"; + pinctrl-names = "default"; + pinctrl-0 = <&pp3000_en>; + + enable-active-high; + gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>; + + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + + vin-supply = <&ppvar_sys>; + }; + + ppvar_centerlogic_pwm: ppvar-centerlogic-pwm { + compatible = "pwm-regulator"; + regulator-name = "ppvar_centerlogic_pwm"; + + pwms = <&pwm3 0 3337 0>; + pwm-supply = <&ppvar_sys>; + pwm-dutycycle-range = <100 0>; + pwm-dutycycle-unit = <100>; + + /* EC turns on w/ ppvar_centerlogic_en; always on for AP */ + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <799434>; + regulator-max-microvolt = <1049925>; + }; + + ppvar_centerlogic: ppvar-centerlogic { + compatible = "vctrl-regulator"; + regulator-name = "ppvar_centerlogic"; + + regulator-min-microvolt = <799434>; + regulator-max-microvolt = <1049925>; + + ctrl-supply = <&ppvar_centerlogic_pwm>; + ctrl-voltage-range = <799434 1049925>; + + regulator-settling-time-up-us = <378>; + min-slew-down-rate = <225>; + ovp-threshold-percent = <16>; + }; + + /* Schematics call this PPVAR even though it's fixed */ + ppvar_logic: ppvar-logic { + compatible = "regulator-fixed"; + regulator-name = "ppvar_logic"; + + /* EC turns on w/ ppvar_logic_en; always on for AP */ + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + vin-supply = <&ppvar_sys>; + }; + + pp1800_audio: pp1800-audio { + compatible = "regulator-fixed"; + regulator-name = "pp1800_audio"; + pinctrl-names = "default"; + pinctrl-0 = <&pp1800_audio_en>; + + enable-active-high; + gpio = <&gpio0 2 GPIO_ACTIVE_HIGH>; + + regulator-always-on; + regulator-boot-on; + + vin-supply = <&pp1800>; + }; + + /* gpio is shared with pp3300_wifi_bt */ + pp1800_pcie: pp1800-pcie { + compatible = "regulator-fixed"; + regulator-name = "pp1800_pcie"; + pinctrl-names = "default"; + pinctrl-0 = <&wlan_module_pd_l>; + + enable-active-high; + gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>; + + /* + * Need to wait 1ms + ramp-up time before we can power on WiFi. + * This has been approximated as 8ms total. + */ + regulator-enable-ramp-delay = <8000>; + + vin-supply = <&pp1800>; + }; + + /* Always on; plain and simple */ + pp3000_ap: pp3000_emmc: pp3000 { + }; + + pp1500_ap_io: pp1500-ap-io { + compatible = "regulator-fixed"; + regulator-name = "pp1500_ap_io"; + pinctrl-names = "default"; + pinctrl-0 = <&pp1500_en>; + + enable-active-high; + gpio = <&gpio0 10 GPIO_ACTIVE_HIGH>; + + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + + vin-supply = <&pp1800>; + }; + + pp3300_disp: pp3300-disp { + compatible = "regulator-fixed"; + regulator-name = "pp3300_disp"; + pinctrl-names = "default"; + pinctrl-0 = <&pp3300_disp_en>; + + enable-active-high; + gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>; + + startup-delay-us = <2000>; + vin-supply = <&pp3300>; + }; + + /* EC turns on w/ pp3300_usb_en_l */ + pp3300_usb: pp3300 { + }; + + /* gpio is shared with pp1800_pcie and pinctrl is set there */ + pp3300_wifi_bt: pp3300-wifi-bt { + compatible = "regulator-fixed"; + regulator-name = "pp3300_wifi_bt"; + + enable-active-high; + gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>; + + vin-supply = <&pp3300>; + }; + + /* + * This is a bit of a hack. The WiFi module should be reset at least + * 1ms after its regulators have ramped up (max rampup time is ~7ms). + * With some stretching of the imagination, we can call the 1.8V + * regulator a supply. + */ + wlan_pd_n: wlan-pd-n { + compatible = "regulator-fixed"; + regulator-name = "wlan_pd_n"; + pinctrl-names = "default"; + pinctrl-0 = <&wlan_module_reset_l>; + + enable-active-high; + gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>; + + vin-supply = <&pp1800_pcie>; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + brightness-levels = <0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 + 17 18 19 20 21 22 23 24 25 26 27 28 29 30 + 31 32 33 34 35 36 37 38 39 40 41 42 43 44 + 45 46 47 48 49 50 51 52 53 54 55 56 57 58 + 59 60 61 62 63 64 65 66 67 68 69 70 71 72 + 73 74 75 76 77 78 79 80 81 82 83 84 85 86 + 87 88 89 90 91 92 93 94 95 96 97 98 99 100>; + default-brightness-level = <51>; + enable-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>; + power-supply = <&pp3300_disp>; + pinctrl-names = "default"; + pinctrl-0 = <&bl_en>; + pwm-delay-us = <10000>; + }; +}; + +&ppvar_bigcpu { + min-slew-down-rate = <225>; + ovp-threshold-percent = <16>; +}; + +&ppvar_litcpu { + min-slew-down-rate = <225>; + ovp-threshold-percent = <16>; +}; + +&ppvar_gpu { + min-slew-down-rate = <225>; + ovp-threshold-percent = <16>; +}; + +&cdn_dp { + extcon = <&usbc_extcon0>, <&usbc_extcon1>; +}; + +&edp { + status = "okay"; + + ports { + edp_out: port@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + edp_out_panel: endpoint@0 { + reg = <0>; + remote-endpoint = <&panel_in_edp>; + }; + }; + }; +}; + +ap_i2c_mic: &i2c1 { + status = "okay"; + + clock-frequency = <400000>; + + /* These are relatively safe rise/fall times */ + i2c-scl-falling-time-ns = <50>; + i2c-scl-rising-time-ns = <300>; + + headsetcodec: rt5514@57 { + compatible = "realtek,rt5514"; + reg = <0x57>; + realtek,dmic-init-delay-ms = <20>; + }; +}; + +ap_i2c_tp: &i2c5 { + status = "okay"; + + clock-frequency = <400000>; + + /* These are relatively safe rise/fall times */ + i2c-scl-falling-time-ns = <50>; + i2c-scl-rising-time-ns = <300>; + + /* + * Note strange pullup enable. Apparently this avoids leakage but + * still allows us to get nice 4.7K pullups for high speed i2c + * transfers. Basically we want the pullup on whenever the ap is + * alive, so the "en" pin just gets set to output high. + */ + pinctrl-0 = <&i2c5_xfer &ap_i2c_tp_pu_en>; +}; + +&cros_ec { + cros_ec_pwm: ec-pwm { + compatible = "google,cros-ec-pwm"; + #pwm-cells = <1>; + }; + + usbc_extcon1: extcon@1 { + compatible = "google,extcon-usbc-cros-ec"; + google,usb-port-id = <1>; + + #extcon-cells = <0>; + }; +}; + +&sound { + rockchip,codec = <&max98357a &headsetcodec + &codec &wacky_spi_audio &cdn_dp>; +}; + +&spi2 { + wacky_spi_audio: spi2@0 { + compatible = "realtek,rt5514"; + reg = <0>; + interrupt-parent = <&gpio1>; + interrupts = <13 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&mic_int>; + /* May run faster once verified. */ + spi-max-frequency = <10000000>; + wakeup-source; + }; +}; + +&pci_rootport { + mvl_wifi: wifi@0,0 { + compatible = "pci1b4b,2b42"; + reg = <0x83010000 0x0 0x00000000 0x0 0x00100000 + 0x83010000 0x0 0x00100000 0x0 0x00100000>; + interrupt-parent = <&gpio0>; + interrupts = <8 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&wlan_host_wake_l>; + wakeup-source; + }; +}; + +&tcphy1 { + status = "okay"; + extcon = <&usbc_extcon1>; +}; + +&u2phy1 { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&usbdrd3_1 { + status = "okay"; + extcon = <&usbc_extcon1>; +}; + +&usbdrd_dwc3_1 { + status = "okay"; + dr_mode = "host"; +}; + +&pinctrl { + discrete-regulators { + pp1500_en: pp1500-en { + rockchip,pins = ; + }; + + pp1800_audio_en: pp1800-audio-en { + rockchip,pins = ; + }; + + pp3000_en: pp3000-en { + rockchip,pins = ; + }; + + pp3300_disp_en: pp3300-disp-en { + rockchip,pins = ; + }; + + wlan_module_pd_l: wlan-module-pd-l { + rockchip,pins = ; + }; + }; +}; + +&wifi { + wifi_perst_l: wifi-perst-l { + rockchip,pins = <2 27 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + wlan_host_wake_l: wlan-host-wake-l { + rockchip,pins = <0 8 RK_FUNC_GPIO &pcfg_pull_none>; + }; +}; diff --git a/arch/arm/dts/rk3399-gru-kevin.dts b/arch/arm/dts/rk3399-gru-kevin.dts new file mode 100644 index 0000000000..2cc7c47d6a --- /dev/null +++ b/arch/arm/dts/rk3399-gru-kevin.dts @@ -0,0 +1,309 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Gru-Kevin Rev 6+ board device tree source + * + * Copyright 2016-2017 Google, Inc + */ + +/dts-v1/; +#include "rk3399-gru-chromebook.dtsi" +#include + +/* + * Kevin-specific things + * + * Things in this section should use names from Kevin schematic since no + * equivalent exists in Gru schematic. If referring to signals that exist + * in Gru we use the Gru names, though. Confusing enough for you? + */ +/ { + model = "Google Kevin"; + compatible = "google,kevin-rev15", "google,kevin-rev14", + "google,kevin-rev13", "google,kevin-rev12", + "google,kevin-rev11", "google,kevin-rev10", + "google,kevin-rev9", "google,kevin-rev8", + "google,kevin-rev7", "google,kevin-rev6", + "google,kevin", "google,gru", "rockchip,rk3399"; + + /* Power tree */ + + p3_3v_dig: p3-3v-dig { + compatible = "regulator-fixed"; + regulator-name = "p3.3v_dig"; + pinctrl-names = "default"; + pinctrl-0 = <&cpu3_pen_pwr_en>; + + enable-active-high; + gpio = <&gpio4 30 GPIO_ACTIVE_HIGH>; + vin-supply = <&pp3300>; + }; + + edp_panel: edp-panel { + compatible = "sharp,lq123p1jx31", "simple-panel"; + backlight = <&backlight>; + power-supply = <&pp3300_disp>; + + ports { + panel_in_edp: endpoint { + remote-endpoint = <&edp_out_panel>; + }; + }; + }; + + thermistor_ppvar_bigcpu: thermistor-ppvar-bigcpu { + compatible = "murata,ncp15wb473"; + pullup-uv = <1800000>; + pullup-ohm = <25500>; + pulldown-ohm = <0>; + io-channels = <&saradc 2>; + #thermal-sensor-cells = <0>; + }; + + thermistor_ppvar_litcpu: thermistor-ppvar-litcpu { + compatible = "murata,ncp15wb473"; + pullup-uv = <1800000>; + pullup-ohm = <25500>; + pulldown-ohm = <0>; + io-channels = <&saradc 3>; + #thermal-sensor-cells = <0>; + }; +}; + +&backlight { + pwms = <&cros_ec_pwm 1>; +}; + +&gpio_keys { + pinctrl-names = "default"; + pinctrl-0 = <&bt_host_wake_l>, <&cpu1_pen_eject>; + + pen-insert { + label = "Pen Insert"; + /* Insert = low, eject = high */ + gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; + linux,code = ; + linux,input-type = ; + wakeup-source; + }; +}; + +&thermal_zones { + bigcpu_reg_thermal: bigcpu-reg-thermal { + polling-delay-passive = <100>; /* milliseconds */ + polling-delay = <1000>; /* milliseconds */ + thermal-sensors = <&thermistor_ppvar_bigcpu 0>; + sustainable-power = <4000>; + + ppvar_bigcpu_trips: trips { + ppvar_bigcpu_on: ppvar-bigcpu-on { + temperature = <40000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + + ppvar_bigcpu_alert: ppvar-bigcpu-alert { + temperature = <50000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + + ppvar_bigcpu_crit: ppvar-bigcpu-crit { + temperature = <90000>; /* millicelsius */ + hysteresis = <0>; /* millicelsius */ + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&ppvar_bigcpu_alert>; + cooling-device = + <&cpu_l0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + contribution = <4096>; + }; + map1 { + trip = <&ppvar_bigcpu_alert>; + cooling-device = + <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + contribution = <1024>; + }; + }; + }; + + litcpu_reg_thermal: litcpu-reg-thermal { + polling-delay-passive = <100>; /* milliseconds */ + polling-delay = <1000>; /* milliseconds */ + thermal-sensors = <&thermistor_ppvar_litcpu 0>; + sustainable-power = <4000>; + + ppvar_litcpu_trips: trips { + ppvar_litcpu_on: ppvar-litcpu-on { + temperature = <40000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + + ppvar_litcpu_alert: ppvar-litcpu-alert { + temperature = <50000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + + ppvar_litcpu_crit: ppvar-litcpu-crit { + temperature = <90000>; /* millicelsius */ + hysteresis = <0>; /* millicelsius */ + type = "critical"; + }; + }; + }; +}; + +ap_i2c_tpm: &i2c0 { + status = "okay"; + + clock-frequency = <400000>; + + /* These are relatively safe rise/fall times. */ + i2c-scl-falling-time-ns = <50>; + i2c-scl-rising-time-ns = <300>; + + tpm: tpm@20 { + compatible = "infineon,slb9645tt"; + reg = <0x20>; + powered-while-suspended; + }; +}; + +ap_i2c_dig: &i2c2 { + status = "okay"; + + clock-frequency = <400000>; + + /* These are relatively safe rise/fall times. */ + i2c-scl-falling-time-ns = <50>; + i2c-scl-rising-time-ns = <300>; + + digitizer: digitizer@9 { + /* wacom,w9013 */ + compatible = "hid-over-i2c"; + reg = <0x9>; + pinctrl-names = "default"; + pinctrl-0 = <&cpu1_dig_irq_l &cpu1_dig_pdct_l>; + + vdd-supply = <&p3_3v_dig>; + post-power-on-delay-ms = <100>; + + interrupt-parent = <&gpio2>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + + hid-descr-addr = <0x1>; + }; +}; + +/* Adjustments to things in the gru baseboard */ + +&ap_i2c_tp { + trackpad@4a { + compatible = "atmel,maxtouch"; + reg = <0x4a>; + pinctrl-names = "default"; + pinctrl-0 = <&trackpad_int_l>; + interrupt-parent = <&gpio1>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + linux,gpio-keymap = ; + wakeup-source; + }; +}; + +&ap_i2c_ts { + touchscreen@4b { + compatible = "atmel,maxtouch"; + reg = <0x4b>; + pinctrl-names = "default"; + pinctrl-0 = <&touch_int_l>; + interrupt-parent = <&gpio3>; + interrupts = <13 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&ppvar_bigcpu_pwm { + regulator-min-microvolt = <798674>; + regulator-max-microvolt = <1302172>; +}; + +&ppvar_bigcpu { + regulator-min-microvolt = <798674>; + regulator-max-microvolt = <1302172>; + ctrl-voltage-range = <798674 1302172>; +}; + +&ppvar_litcpu_pwm { + regulator-min-microvolt = <799065>; + regulator-max-microvolt = <1303738>; +}; + +&ppvar_litcpu { + regulator-min-microvolt = <799065>; + regulator-max-microvolt = <1303738>; + ctrl-voltage-range = <799065 1303738>; +}; + +&ppvar_gpu_pwm { + regulator-min-microvolt = <785782>; + regulator-max-microvolt = <1217729>; +}; + +&ppvar_gpu { + regulator-min-microvolt = <785782>; + regulator-max-microvolt = <1217729>; + ctrl-voltage-range = <785782 1217729>; +}; + +&ppvar_centerlogic_pwm { + regulator-min-microvolt = <800069>; + regulator-max-microvolt = <1049692>; +}; + +&ppvar_centerlogic { + regulator-min-microvolt = <800069>; + regulator-max-microvolt = <1049692>; + ctrl-voltage-range = <800069 1049692>; +}; + +&saradc { + status = "okay"; + vref-supply = <&pp1800_ap_io>; +}; + +&mvl_wifi { + marvell,wakeup-pin = <14>; /* GPIO_14 on Marvell */ +}; + +&pinctrl { + digitizer { + /* Has external pullup */ + cpu1_dig_irq_l: cpu1-dig-irq-l { + rockchip,pins = <2 4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + /* Has external pullup */ + cpu1_dig_pdct_l: cpu1-dig-pdct-l { + rockchip,pins = <2 5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + discrete-regulators { + cpu3_pen_pwr_en: cpu3-pen-pwr-en { + rockchip,pins = <4 30 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pen { + cpu1_pen_eject: cpu1-pen-eject { + rockchip,pins = <0 13 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; +}; diff --git a/arch/arm/dts/rk3399-gru.dtsi b/arch/arm/dts/rk3399-gru.dtsi new file mode 100644 index 0000000000..7cc9b2642b --- /dev/null +++ b/arch/arm/dts/rk3399-gru.dtsi @@ -0,0 +1,831 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Gru (and derivatives) board device tree source + * + * Copyright 2016-2017 Google, Inc + */ + +#include +#include "rk3399.dtsi" +#include "rk3399-op1-opp.dtsi" + +/ { + chosen { + stdout-path = "serial2:115200n8"; + }; + + /* + * Power Tree + * + * In general an attempt is made to include all rails called out by + * the schematic as long as those rails interact in some way with + * the AP. AKA: + * - Rails that only connect to the EC (or devices that the EC talks to) + * are not included. + * - Rails _are_ included if the rails go to the AP even if the AP + * doesn't currently care about them / they are always on. The idea + * here is that it makes it easier to map to the schematic or extend + * later. + * + * If two rails are substantially the same from the AP's point of + * view, though, we won't create a full fixed regulator. We'll just + * put the child rail as an alias of the parent rail. Sometimes rails + * look the same to the AP because one of these is true: + * - The EC controls the enable and the EC always enables a rail as + * long as the AP is running. + * - The rails are actually connected to each other by a jumper and + * the distinction is just there to add clarity/flexibility to the + * schematic. + */ + + ppvar_sys: ppvar-sys { + compatible = "regulator-fixed"; + regulator-name = "ppvar_sys"; + regulator-always-on; + regulator-boot-on; + }; + + pp1200_lpddr: pp1200-lpddr { + compatible = "regulator-fixed"; + regulator-name = "pp1200_lpddr"; + + /* EC turns on w/ lpddr_pwr_en; always on for AP */ + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + + vin-supply = <&ppvar_sys>; + }; + + pp1800: pp1800 { + compatible = "regulator-fixed"; + regulator-name = "pp1800"; + + /* Always on when ppvar_sys shows power good */ + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + vin-supply = <&ppvar_sys>; + }; + + pp3300: pp3300 { + compatible = "regulator-fixed"; + regulator-name = "pp3300"; + + /* Always on; plain and simple */ + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + vin-supply = <&ppvar_sys>; + }; + + pp5000: pp5000 { + compatible = "regulator-fixed"; + regulator-name = "pp5000"; + + /* EC turns on w/ pp5000_en; always on for AP */ + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + vin-supply = <&ppvar_sys>; + }; + + ppvar_bigcpu_pwm: ppvar-bigcpu-pwm { + compatible = "pwm-regulator"; + regulator-name = "ppvar_bigcpu_pwm"; + + pwms = <&pwm1 0 3337 0>; + pwm-supply = <&ppvar_sys>; + pwm-dutycycle-range = <100 0>; + pwm-dutycycle-unit = <100>; + + /* EC turns on w/ ap_core_en; always on for AP */ + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <800107>; + regulator-max-microvolt = <1302232>; + }; + + ppvar_bigcpu: ppvar-bigcpu { + compatible = "vctrl-regulator"; + regulator-name = "ppvar_bigcpu"; + + regulator-min-microvolt = <800107>; + regulator-max-microvolt = <1302232>; + + ctrl-supply = <&ppvar_bigcpu_pwm>; + ctrl-voltage-range = <800107 1302232>; + + regulator-settling-time-up-us = <322>; + }; + + ppvar_litcpu_pwm: ppvar-litcpu-pwm { + compatible = "pwm-regulator"; + regulator-name = "ppvar_litcpu_pwm"; + + pwms = <&pwm2 0 3337 0>; + pwm-supply = <&ppvar_sys>; + pwm-dutycycle-range = <100 0>; + pwm-dutycycle-unit = <100>; + + /* EC turns on w/ ap_core_en; always on for AP */ + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <797743>; + regulator-max-microvolt = <1307837>; + }; + + ppvar_litcpu: ppvar-litcpu { + compatible = "vctrl-regulator"; + regulator-name = "ppvar_litcpu"; + + regulator-min-microvolt = <797743>; + regulator-max-microvolt = <1307837>; + + ctrl-supply = <&ppvar_litcpu_pwm>; + ctrl-voltage-range = <797743 1307837>; + + regulator-settling-time-up-us = <384>; + }; + + ppvar_gpu_pwm: ppvar-gpu-pwm { + compatible = "pwm-regulator"; + regulator-name = "ppvar_gpu_pwm"; + + pwms = <&pwm0 0 3337 0>; + pwm-supply = <&ppvar_sys>; + pwm-dutycycle-range = <100 0>; + pwm-dutycycle-unit = <100>; + + /* EC turns on w/ ap_core_en; always on for AP */ + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <786384>; + regulator-max-microvolt = <1217747>; + }; + + ppvar_gpu: ppvar-gpu { + compatible = "vctrl-regulator"; + regulator-name = "ppvar_gpu"; + + regulator-min-microvolt = <786384>; + regulator-max-microvolt = <1217747>; + + ctrl-supply = <&ppvar_gpu_pwm>; + ctrl-voltage-range = <786384 1217747>; + + regulator-settling-time-up-us = <390>; + }; + + /* EC turns on w/ pp900_ddrpll_en */ + pp900_ddrpll: pp900-ap { + }; + + /* EC turns on w/ pp900_pll_en */ + pp900_pll: pp900-ap { + }; + + /* EC turns on w/ pp900_pmu_en */ + pp900_pmu: pp900-ap { + }; + + /* EC turns on w/ pp1800_s0_en_l */ + pp1800_ap_io: pp1800_emmc: pp1800_nfc: pp1800_s0: pp1800 { + }; + + /* EC turns on w/ pp1800_avdd_en_l */ + pp1800_avdd: pp1800 { + }; + + /* EC turns on w/ pp1800_lid_en_l */ + pp1800_lid: pp1800_mic: pp1800 { + }; + + /* EC turns on w/ lpddr_pwr_en */ + pp1800_lpddr: pp1800 { + }; + + /* EC turns on w/ pp1800_pmu_en_l */ + pp1800_pmu: pp1800 { + }; + + /* EC turns on w/ pp1800_usb_en_l */ + pp1800_usb: pp1800 { + }; + + pp3000_sd_slot: pp3000-sd-slot { + compatible = "regulator-fixed"; + regulator-name = "pp3000_sd_slot"; + pinctrl-names = "default"; + pinctrl-0 = <&sd_slot_pwr_en>; + + enable-active-high; + gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>; + + vin-supply = <&pp3000>; + }; + + /* + * Technically, this is a small abuse of 'regulator-gpio'; this + * regulator is a mux between pp1800 and pp3300. pp1800 and pp3300 are + * always on though, so it is sufficient to simply control the mux + * here. + */ + ppvar_sd_card_io: ppvar-sd-card-io { + compatible = "regulator-gpio"; + regulator-name = "ppvar_sd_card_io"; + pinctrl-names = "default"; + pinctrl-0 = <&sd_io_pwr_en &sd_pwr_1800_sel>; + + enable-active-high; + enable-gpio = <&gpio2 2 GPIO_ACTIVE_HIGH>; + gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>; + states = <1800000 0x1 + 3000000 0x0>; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + }; + + /* EC turns on w/ pp3300_trackpad_en_l */ + pp3300_trackpad: pp3300-trackpad { + }; + + /* EC turns on w/ usb_a_en */ + pp5000_usb_a_vbus: pp5000 { + }; + + gpio_keys: gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&bt_host_wake_l>; + + wake_on_bt: wake-on-bt { + label = "Wake-on-Bluetooth"; + gpios = <&gpio0 3 GPIO_ACTIVE_LOW>; + linux,code = ; + wakeup-source; + }; + }; + + max98357a: max98357a { + compatible = "maxim,max98357a"; + pinctrl-names = "default"; + pinctrl-0 = <&sdmode_en>; + sdmode-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; + sdmode-delay = <2>; + #sound-dai-cells = <0>; + status = "okay"; + }; + + sound: sound { + compatible = "rockchip,rk3399-gru-sound"; + rockchip,cpu = <&i2s0 &i2s2>; + }; +}; + +&cdn_dp { + status = "okay"; +}; + +/* + * Set some suspend operating points to avoid OVP in suspend + * + * When we go into S3 ARM Trusted Firmware will transition our PWM regulators + * from wherever they're at back to the "default" operating point (whatever + * voltage we get when we set the PWM pins to "input"). + * + * This quick transition under light load has the possibility to trigger the + * regulator "over voltage protection" (OVP). + * + * To make extra certain that we don't hit this OVP at suspend time, we'll + * transition to a voltage that's much closer to the default (~1.0 V) so that + * there will not be a big jump. Technically we only need to get within 200 mV + * of the default voltage, but the speed here should be fast enough and we need + * suspend/resume to be rock solid. + */ + +&cluster0_opp { + opp05 { + opp-suspend; + }; +}; + +&cluster1_opp { + opp06 { + opp-suspend; + }; +}; + +&cpu_l0 { + cpu-supply = <&ppvar_litcpu>; +}; + +&cpu_l1 { + cpu-supply = <&ppvar_litcpu>; +}; + +&cpu_l2 { + cpu-supply = <&ppvar_litcpu>; +}; + +&cpu_l3 { + cpu-supply = <&ppvar_litcpu>; +}; + +&cpu_b0 { + cpu-supply = <&ppvar_bigcpu>; +}; + +&cpu_b1 { + cpu-supply = <&ppvar_bigcpu>; +}; + +&cru { + assigned-clocks = + <&cru PLL_GPLL>, <&cru PLL_CPLL>, + <&cru PLL_NPLL>, + <&cru ACLK_PERIHP>, <&cru HCLK_PERIHP>, + <&cru PCLK_PERIHP>, + <&cru ACLK_PERILP0>, <&cru HCLK_PERILP0>, + <&cru PCLK_PERILP0>, <&cru ACLK_CCI>, + <&cru HCLK_PERILP1>, <&cru PCLK_PERILP1>, + <&cru ACLK_VIO>, <&cru ACLK_HDCP>, + <&cru ACLK_GIC_PRE>, + <&cru PCLK_DDR>; + assigned-clock-rates = + <600000000>, <800000000>, + <1000000000>, + <150000000>, <75000000>, + <37500000>, + <100000000>, <100000000>, + <50000000>, <800000000>, + <100000000>, <50000000>, + <400000000>, <400000000>, + <200000000>, + <200000000>; +}; + +&emmc_phy { + status = "okay"; +}; + +&gpu { + mali-supply = <&ppvar_gpu>; + status = "okay"; +}; + +ap_i2c_ts: &i2c3 { + status = "okay"; + + clock-frequency = <400000>; + + /* These are relatively safe rise/fall times */ + i2c-scl-falling-time-ns = <50>; + i2c-scl-rising-time-ns = <300>; +}; + +ap_i2c_audio: &i2c8 { + status = "okay"; + + clock-frequency = <400000>; + + /* These are relatively safe rise/fall times */ + i2c-scl-falling-time-ns = <50>; + i2c-scl-rising-time-ns = <300>; + + codec: da7219@1a { + compatible = "dlg,da7219"; + reg = <0x1a>; + interrupt-parent = <&gpio1>; + interrupts = <23 IRQ_TYPE_LEVEL_LOW>; + clocks = <&cru SCLK_I2S_8CH_OUT>; + clock-names = "mclk"; + dlg,micbias-lvl = <2600>; + dlg,mic-amp-in-sel = "diff"; + pinctrl-names = "default"; + pinctrl-0 = <&headset_int_l>; + VDD-supply = <&pp1800>; + VDDMIC-supply = <&pp3300>; + VDDIO-supply = <&pp1800>; + + da7219_aad { + dlg,adc-1bit-rpt = <1>; + dlg,btn-avg = <4>; + dlg,btn-cfg = <50>; + dlg,mic-det-thr = <500>; + dlg,jack-ins-deb = <20>; + dlg,jack-det-rate = "32ms_64ms"; + dlg,jack-rem-deb = <1>; + + dlg,a-d-btn-thr = <0xa>; + dlg,d-b-btn-thr = <0x16>; + dlg,b-c-btn-thr = <0x21>; + dlg,c-mic-btn-thr = <0x3E>; + }; + }; +}; + +&i2s0 { + status = "okay"; +}; + +&i2s2 { + status = "okay"; +}; + +&io_domains { + status = "okay"; + + audio-supply = <&pp1800_audio>; /* APIO5_VDD; 3d 4a */ + bt656-supply = <&pp1800_ap_io>; /* APIO2_VDD; 2a 2b */ + gpio1830-supply = <&pp3000_ap>; /* APIO4_VDD; 4c 4d */ + sdmmc-supply = <&ppvar_sd_card_io>; /* SDMMC0_VDD; 4b */ +}; + +&pcie0 { + status = "okay"; + + ep-gpios = <&gpio2 27 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_clkreqn_cpm>, <&wifi_perst_l>; + vpcie3v3-supply = <&pp3300_wifi_bt>; + vpcie1v8-supply = <&wlan_pd_n>; /* HACK: see &wlan_pd_n */ + vpcie0v9-supply = <&pp900_pcie>; + + pci_rootport: pcie@0,0 { + reg = <0x83000000 0x0 0x00000000 0x0 0x00000000>; + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; +}; + +&pcie_phy { + status = "okay"; +}; + +&pmu_io_domains { + status = "okay"; + + pmu1830-supply = <&pp1800_pmu>; /* PMUIO2_VDD */ +}; + +&pwm0 { + status = "okay"; +}; + +&pwm1 { + status = "okay"; +}; + +&pwm2 { + status = "okay"; +}; + +&pwm3 { + status = "okay"; +}; + +&sdhci { + /* + * Signal integrity isn't great at 200 MHz and 150 MHz (DDR) gives the + * same (or nearly the same) performance for all eMMC that are intended + * to be used. + */ + assigned-clock-rates = <150000000>; + + bus-width = <8>; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + non-removable; + status = "okay"; +}; + +&sdmmc { + status = "okay"; + + /* + * Note: configure "sdmmc_cd" as card detect even though it's actually + * hooked to ground. Because we specified "cd-gpios" below dw_mmc + * should be ignoring card detect anyway. Specifying the pin as + * sdmmc_cd means that even if you've got GRF_SOC_CON7[12] (force_jtag) + * turned on that the system will still make sure the port is + * configured as SDMMC and not JTAG. + */ + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_cd_gpio + &sdmmc_bus4>; + + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + cd-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>; + disable-wp; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-sdr104; + vmmc-supply = <&pp3000_sd_slot>; + vqmmc-supply = <&ppvar_sd_card_io>; +}; + +&spi1 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-1 = <&spi1_sleep>; + + spiflash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + + /* May run faster once verified. */ + spi-max-frequency = <10000000>; + }; +}; + +&spi2 { + status = "okay"; +}; + +&spi5 { + status = "okay"; + + cros_ec: ec@0 { + compatible = "google,cros-ec-spi"; + reg = <0>; + interrupt-parent = <&gpio0>; + interrupts = <1 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&ec_ap_int_l>; + spi-max-frequency = <3000000>; + + i2c_tunnel: i2c-tunnel { + compatible = "google,cros-ec-i2c-tunnel"; + google,remote-bus = <4>; + #address-cells = <1>; + #size-cells = <0>; + }; + + usbc_extcon0: extcon@0 { + compatible = "google,extcon-usbc-cros-ec"; + google,usb-port-id = <0>; + + #extcon-cells = <0>; + }; + }; +}; + +&tsadc { + status = "okay"; + + rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */ + rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */ +}; + +&tcphy0 { + status = "okay"; + extcon = <&usbc_extcon0>; +}; + +&u2phy0 { + status = "okay"; +}; + +&u2phy0_host { + status = "okay"; +}; + +&u2phy1_host { + status = "okay"; +}; + +&u2phy0_otg { + status = "okay"; +}; + +&u2phy1_otg { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usbdrd3_0 { + status = "okay"; + extcon = <&usbc_extcon0>; +}; + +&usbdrd_dwc3_0 { + status = "okay"; + dr_mode = "host"; +}; + +&vopb { + status = "okay"; +}; + +&vopb_mmu { + status = "okay"; +}; + +&vopl { + status = "okay"; +}; + +&vopl_mmu { + status = "okay"; +}; + +#include +#include + +&pinctrl { + /* + * pinctrl settings for pins that have no real owners. + * + * At the moment settings are identical for S0 and S3, but if we later + * need to configure things differently for S3 we'll adjust here. + */ + pinctrl-names = "default"; + pinctrl-0 = < + &ap_pwroff /* AP will auto-assert this when in S3 */ + &clk_32k /* This pin is always 32k on gru boards */ + >; + + pcfg_output_low: pcfg-output-low { + output-low; + }; + + pcfg_output_high: pcfg-output-high { + output-high; + }; + + pcfg_pull_none_8ma: pcfg-pull-none-8ma { + bias-disable; + drive-strength = <8>; + }; + + backlight-enable { + bl_en: bl-en { + rockchip,pins = <1 17 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + cros-ec { + ec_ap_int_l: ec-ap-int-l { + rockchip,pins = ; + }; + }; + + discrete-regulators { + sd_io_pwr_en: sd-io-pwr-en { + rockchip,pins = ; + }; + + sd_pwr_1800_sel: sd-pwr-1800-sel { + rockchip,pins = ; + }; + + sd_slot_pwr_en: sd-slot-pwr-en { + rockchip,pins = ; + }; + }; + + codec { + /* Has external pullup */ + headset_int_l: headset-int-l { + rockchip,pins = <1 23 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + mic_int: mic-int { + rockchip,pins = <1 13 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + max98357a { + sdmode_en: sdmode-en { + rockchip,pins = <1 2 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + pcie { + pcie_clkreqn_cpm: pci-clkreqn-cpm { + /* + * Since our pcie doesn't support ClockPM(CPM), we want + * to hack this as gpio, so the EP could be able to + * de-assert it along and make ClockPM(CPM) work. + */ + rockchip,pins = <2 26 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + sdmmc { + /* + * We run sdmmc at max speed; bump up drive strength. + * We also have external pulls, so disable the internal ones. + */ + sdmmc_bus4: sdmmc-bus4 { + rockchip,pins = + <4 8 RK_FUNC_1 &pcfg_pull_none_8ma>, + <4 9 RK_FUNC_1 &pcfg_pull_none_8ma>, + <4 10 RK_FUNC_1 &pcfg_pull_none_8ma>, + <4 11 RK_FUNC_1 &pcfg_pull_none_8ma>; + }; + + sdmmc_clk: sdmmc-clk { + rockchip,pins = + <4 12 RK_FUNC_1 &pcfg_pull_none_8ma>; + }; + + sdmmc_cmd: sdmmc-cmd { + rockchip,pins = + <4 13 RK_FUNC_1 &pcfg_pull_none_8ma>; + }; + + /* + * In our case the official card detect is hooked to ground + * to avoid getting access to JTAG just by sticking something + * in the SD card slot (see the force_jtag bit in the TRM). + * + * We still configure it as card detect because it doesn't + * hurt and dw_mmc will ignore it. We make sure to disable + * the pull though so we don't burn needless power. + */ + sdmmc_cd: sdmmc-cd { + rockchip,pins = + <0 7 RK_FUNC_1 &pcfg_pull_none>; + }; + + /* This is where we actually hook up CD; has external pull */ + sdmmc_cd_gpio: sdmmc-cd-gpio { + rockchip,pins = <4 24 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + spi1 { + spi1_sleep: spi1-sleep { + /* + * Pull down SPI1 CLK/CS/RX/TX during suspend, to + * prevent leakage. + */ + rockchip,pins = <1 9 RK_FUNC_GPIO &pcfg_pull_down>, + <1 10 RK_FUNC_GPIO &pcfg_pull_down>, + <1 7 RK_FUNC_GPIO &pcfg_pull_down>, + <1 8 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + touchscreen { + touch_int_l: touch-int-l { + rockchip,pins = <3 13 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + touch_reset_l: touch-reset-l { + rockchip,pins = <4 26 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + trackpad { + ap_i2c_tp_pu_en: ap-i2c-tp-pu-en { + rockchip,pins = <3 12 RK_FUNC_GPIO &pcfg_output_high>; + }; + + trackpad_int_l: trackpad-int-l { + rockchip,pins = <1 4 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + wifi: wifi { + wlan_module_reset_l: wlan-module-reset-l { + rockchip,pins = <1 11 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_host_wake_l: bt-host-wake-l { + /* Kevin has an external pull up, but Gru does not */ + rockchip,pins = <0 3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + write-protect { + ap_fw_wp: ap-fw-wp { + rockchip,pins = <1 18 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; +}; diff --git a/arch/arm/dts/rk3399-op1-opp.dtsi b/arch/arm/dts/rk3399-op1-opp.dtsi new file mode 100644 index 0000000000..69cc9b05ba --- /dev/null +++ b/arch/arm/dts/rk3399-op1-opp.dtsi @@ -0,0 +1,141 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2016-2017 Fuzhou Rockchip Electronics Co., Ltd + */ + +/ { + cluster0_opp: opp-table0 { + compatible = "operating-points-v2"; + opp-shared; + + opp00 { + opp-hz = /bits/ 64 <408000000>; + opp-microvolt = <800000>; + clock-latency-ns = <40000>; + }; + opp01 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <825000>; + }; + opp02 { + opp-hz = /bits/ 64 <816000000>; + opp-microvolt = <850000>; + }; + opp03 { + opp-hz = /bits/ 64 <1008000000>; + opp-microvolt = <900000>; + }; + opp04 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <975000>; + }; + opp05 { + opp-hz = /bits/ 64 <1416000000>; + opp-microvolt = <1100000>; + }; + opp06 { + opp-hz = /bits/ 64 <1512000000>; + opp-microvolt = <1150000>; + }; + }; + + cluster1_opp: opp-table1 { + compatible = "operating-points-v2"; + opp-shared; + + opp00 { + opp-hz = /bits/ 64 <408000000>; + opp-microvolt = <800000>; + clock-latency-ns = <40000>; + }; + opp01 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <800000>; + }; + opp02 { + opp-hz = /bits/ 64 <816000000>; + opp-microvolt = <825000>; + }; + opp03 { + opp-hz = /bits/ 64 <1008000000>; + opp-microvolt = <850000>; + }; + opp04 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <900000>; + }; + opp05 { + opp-hz = /bits/ 64 <1416000000>; + opp-microvolt = <975000>; + }; + opp06 { + opp-hz = /bits/ 64 <1608000000>; + opp-microvolt = <1050000>; + }; + opp07 { + opp-hz = /bits/ 64 <1800000000>; + opp-microvolt = <1150000>; + }; + opp08 { + opp-hz = /bits/ 64 <2016000000>; + opp-microvolt = <1250000>; + }; + }; + + gpu_opp_table: opp-table2 { + compatible = "operating-points-v2"; + + opp00 { + opp-hz = /bits/ 64 <200000000>; + opp-microvolt = <800000>; + }; + opp01 { + opp-hz = /bits/ 64 <297000000>; + opp-microvolt = <800000>; + }; + opp02 { + opp-hz = /bits/ 64 <400000000>; + opp-microvolt = <825000>; + }; + opp03 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <850000>; + }; + opp04 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <925000>; + }; + opp05 { + opp-hz = /bits/ 64 <800000000>; + opp-microvolt = <1075000>; + }; + }; +}; + +&cpu_l0 { + operating-points-v2 = <&cluster0_opp>; +}; + +&cpu_l1 { + operating-points-v2 = <&cluster0_opp>; +}; + +&cpu_l2 { + operating-points-v2 = <&cluster0_opp>; +}; + +&cpu_l3 { + operating-points-v2 = <&cluster0_opp>; +}; + +&cpu_b0 { + operating-points-v2 = <&cluster1_opp>; +}; + +&cpu_b1 { + operating-points-v2 = <&cluster1_opp>; +}; + +&gpu { + operating-points-v2 = <&gpu_opp_table>; +};