From: Wu, Josh Date: Tue, 24 Jun 2014 09:31:03 +0000 (+0800) Subject: README: document the CONFIG_ENV_IS_IN_FAT option X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=d1db76f1494492fc1c13e3bfe036c6dfb942e8be;p=u-boot.git README: document the CONFIG_ENV_IS_IN_FAT option In README file, add document for the missing configuration option: CONFIG_ENV_IS_IN_FAT. Signed-off-by: Josh Wu Reviewed-by: Stephen Warren --- diff --git a/README b/README index 55c3fcdca4..0c98545a0d 100644 --- a/README +++ b/README @@ -4156,6 +4156,37 @@ but it can not erase, write this NOR flash by SRIO or PCIE interface. You will probably want to define these to avoid a really noisy system when storing the env in UBI. +- CONFIG_ENV_IS_IN_FAT: + Define this if you want to use the FAT file system for the environment. + + - FAT_ENV_INTERFACE: + + Define this to a string that is the name of the block device. + + - FAT_ENV_DEV_AND_PART: + + Define this to a string to specify the partition of the device. It can + be as following: + + "D:P", "D:0", "D", "D:" or "D:auto" (D, P are integers. And P >= 1) + - "D:P": device D partition P. Error occurs if device D has no + partition table. + - "D:0": device D. + - "D" or "D:": device D partition 1 if device D has partition + table, or the whole device D if has no partition + table. + - "D:auto": first partition in device D with bootable flag set. + If none, first valid paratition in device D. If no + partition table then means device D. + + - FAT_ENV_FILE: + + It's a string of the FAT file name. This file use to store the + envrionment. + + - CONFIG_FAT_WRITE: + This should be defined. Otherwise it cannot save the envrionment file. + - CONFIG_ENV_IS_IN_MMC: Define this if you have an MMC device which you want to use for the