From: Vinitha Pillai-B57223 Date: Thu, 23 Mar 2017 08:18:14 +0000 (+0530) Subject: armv8: fsl-layerscape: SECURE BOOT: Add header address of PPA in kconfig X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=d1a795ace90b9e2fee8f9db10489886310264336;p=u-boot.git armv8: fsl-layerscape: SECURE BOOT: Add header address of PPA in kconfig The header address of PPA defined in Kconfig. Signed-off-by: Vinitha Pillai Signed-off-by: Sumit Garg Reviewed-by: York Sun --- diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig index b24462bede..d587ed3c93 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig +++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig @@ -171,6 +171,18 @@ config SYS_LS_PPA_FW_ADDR QSPI flash, this address is a directly memory-mapped. If it is in a serial accessed flash, such as NAND and SD card, it is a byte offset. + +config SYS_LS_PPA_ESBC_ADDR + hex "hdr address of PPA firmware loading from" + depends on FSL_LS_PPA && CHAIN_OF_TRUST + default 0x600c0000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1043A + default 0x580c40000 if SYS_LS_PPA_FW_IN_XIP && FSL_LSCH3 + help + If the PPA header firmware locate at XIP flash, such as NOR or + QSPI flash, this address is a directly memory-mapped. + If it is in a serial accessed flash, such as NAND and SD + card, it is a byte offset. + endmenu config SYS_FSL_ERRATUM_A010315 diff --git a/arch/arm/cpu/armv8/fsl-layerscape/ppa.c b/arch/arm/cpu/armv8/fsl-layerscape/ppa.c index b35ad5fb6f..7f87bb8689 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/ppa.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/ppa.c @@ -178,7 +178,7 @@ int ppa_init(void) ppa_img_addr = (uintptr_t)ppa_fit_addr; if (fsl_check_boot_mode_secure() != 0) { ret = fsl_secboot_validate(ppa_esbc_hdr, - CONFIG_PPA_KEY_HASH, + PPA_KEY_HASH, &ppa_img_addr); if (ret != 0) printf("PPA validation failed\n"); diff --git a/arch/arm/include/asm/fsl_secure_boot.h b/arch/arm/include/asm/fsl_secure_boot.h index d98a1e8f89..4c36f9dc5e 100644 --- a/arch/arm/include/asm/fsl_secure_boot.h +++ b/arch/arm/include/asm/fsl_secure_boot.h @@ -109,23 +109,13 @@ #endif #ifdef CONFIG_FSL_LS_PPA -#ifdef CONFIG_SYS_LS_PPA_FW_IN_XIP -#ifdef CONFIG_LS1043A -#define CONFIG_SYS_LS_PPA_ESBC_ADDR 0x600c0000 -#elif defined(CONFIG_FSL_LSCH3) -#define CONFIG_SYS_LS_PPA_ESBC_ADDR 0x580c40000 -#endif -#else -#error "No CONFIG_SYS_LS_PPA_FW_IN_xxx defined" -#endif /* ifdef CONFIG_SYS_LS_PPA_FW_IN_XIP */ - /* Define the key hash here if SRK used for signing PPA image is * different from SRK hash put in SFP used for U-Boot. * Example - * #define CONFIG_PPA_KEY_HASH \ + * #define PPA_KEY_HASH \ * "41066b564c6ffcef40ccbc1e0a5d0d519604000c785d97bbefd25e4d288d1c8b" */ -#define CONFIG_PPA_KEY_HASH NULL +#define PPA_KEY_HASH NULL #endif /* ifdef CONFIG_FSL_LS_PPA */ #include