From: Tom Rini Date: Mon, 1 Aug 2022 01:08:22 +0000 (-0400) Subject: Convert CONFIG_SYS_FSL_DDR_MAIN_NUM_CTRLS et al to Kconfig X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=d0748898d80287a5d57200e979fb97f63a22aee1;p=u-boot.git Convert CONFIG_SYS_FSL_DDR_MAIN_NUM_CTRLS et al to Kconfig This converts the following to Kconfig: CONFIG_SYS_FSL_DDR_MAIN_NUM_CTRLS CONFIG_SYS_FSL_OTHER_DDR_NUM_CTRLS And we remove the entries from the README for a number of already converted items. Signed-off-by: Tom Rini --- diff --git a/README b/README index 6b6f722733..ebfdced4a7 100644 --- a/README +++ b/README @@ -363,68 +363,17 @@ The following options need to be configured: CONFIG_SYS_FSL_DDR_ADDR Freescale DDR memory-mapped register base. - CONFIG_SYS_FSL_DDRC_GEN1 - Freescale DDR1 controller. - - CONFIG_SYS_FSL_DDRC_GEN2 - Freescale DDR2 controller. - - CONFIG_SYS_FSL_DDRC_GEN3 - Freescale DDR3 controller. - - CONFIG_SYS_FSL_DDRC_GEN4 - Freescale DDR4 controller. - - CONFIG_SYS_FSL_DDRC_ARM_GEN3 - Freescale DDR3 controller for ARM-based SoCs. - - CONFIG_SYS_FSL_DDR1 - Board config to use DDR1. It can be enabled for SoCs with - Freescale DDR1 or DDR2 controllers, depending on the board - implemetation. - - CONFIG_SYS_FSL_DDR2 - Board config to use DDR2. It can be enabled for SoCs with - Freescale DDR2 or DDR3 controllers, depending on the board - implementation. - - CONFIG_SYS_FSL_DDR3 - Board config to use DDR3. It can be enabled for SoCs with - Freescale DDR3 or DDR3L controllers. - - CONFIG_SYS_FSL_DDR3L - Board config to use DDR3L. It can be enabled for SoCs with - DDR3L controllers. - CONFIG_SYS_FSL_IFC_CLK_DIV Defines divider of platform clock(clock input to IFC controller). CONFIG_SYS_FSL_LBC_CLK_DIV Defines divider of platform clock(clock input to eLBC controller). - CONFIG_SYS_FSL_DDR_BE - Defines the DDR controller register space as Big Endian - - CONFIG_SYS_FSL_DDR_LE - Defines the DDR controller register space as Little Endian - CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY Physical address from the view of DDR controllers. It is the same as CONFIG_SYS_DDR_SDRAM_BASE for all Power SoCs. But it could be different for ARM SoCs. - CONFIG_SYS_FSL_DDR_MAIN_NUM_CTRLS - Number of controllers used as main memory. - - CONFIG_SYS_FSL_OTHER_DDR_NUM_CTRLS - Number of controllers used for other than main memory. - - CONFIG_SYS_FSL_SEC_BE - Defines the SEC controller register space as Big Endian - - CONFIG_SYS_FSL_SEC_LE - Defines the SEC controller register space as Little Endian - - MIPS CPU options: CONFIG_XWAY_SWAP_BYTES diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig index 1f86070b8a..91a5863c97 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig +++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig @@ -193,6 +193,7 @@ config ARCH_LS2080A select FSL_IFC select FSL_LAYERSCAPE select FSL_LSCH3 + select SYS_FSL_OTHER_DDR_NUM_CTRLS select GICV3 select SKIP_LOWLEVEL_INIT select SYS_FSL_SRDS_1 diff --git a/configs/ls2080aqds_SECURE_BOOT_defconfig b/configs/ls2080aqds_SECURE_BOOT_defconfig index afb4e48e7e..034f15760b 100644 --- a/configs/ls2080aqds_SECURE_BOOT_defconfig +++ b/configs/ls2080aqds_SECURE_BOOT_defconfig @@ -54,6 +54,7 @@ CONFIG_SATA=y CONFIG_SATA_CEVA=y CONFIG_DYNAMIC_DDR_CLK_FREQ=y CONFIG_DIMM_SLOTS_PER_CTLR=2 +CONFIG_SYS_FSL_DDR_MAIN_NUM_CTRLS=2 CONFIG_DDR_ECC=y CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y CONFIG_SYS_FSL_DDR_INTLV_256B=y diff --git a/configs/ls2080aqds_defconfig b/configs/ls2080aqds_defconfig index 15dadeb4e4..d8efe46f3c 100644 --- a/configs/ls2080aqds_defconfig +++ b/configs/ls2080aqds_defconfig @@ -57,6 +57,7 @@ CONFIG_SATA_CEVA=y CONFIG_FSL_CAAM=y CONFIG_DYNAMIC_DDR_CLK_FREQ=y CONFIG_DIMM_SLOTS_PER_CTLR=2 +CONFIG_SYS_FSL_DDR_MAIN_NUM_CTRLS=2 CONFIG_DDR_ECC=y CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y CONFIG_SYS_FSL_DDR_INTLV_256B=y diff --git a/configs/ls2080aqds_nand_defconfig b/configs/ls2080aqds_nand_defconfig index 9fc1801c15..a0fbb7d3c3 100644 --- a/configs/ls2080aqds_nand_defconfig +++ b/configs/ls2080aqds_nand_defconfig @@ -77,6 +77,7 @@ CONFIG_SATA_CEVA=y CONFIG_FSL_CAAM=y CONFIG_DYNAMIC_DDR_CLK_FREQ=y CONFIG_DIMM_SLOTS_PER_CTLR=2 +CONFIG_SYS_FSL_DDR_MAIN_NUM_CTRLS=2 CONFIG_DDR_ECC=y CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y CONFIG_SYS_FSL_DDR_INTLV_256B=y diff --git a/configs/ls2080aqds_qspi_defconfig b/configs/ls2080aqds_qspi_defconfig index d2dd95ea79..9925333678 100644 --- a/configs/ls2080aqds_qspi_defconfig +++ b/configs/ls2080aqds_qspi_defconfig @@ -58,6 +58,7 @@ CONFIG_SATA_CEVA=y CONFIG_FSL_CAAM=y CONFIG_DYNAMIC_DDR_CLK_FREQ=y CONFIG_DIMM_SLOTS_PER_CTLR=2 +CONFIG_SYS_FSL_DDR_MAIN_NUM_CTRLS=2 CONFIG_DDR_ECC=y CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y CONFIG_SYS_FSL_DDR_INTLV_256B=y diff --git a/configs/ls2080aqds_sdcard_defconfig b/configs/ls2080aqds_sdcard_defconfig index e2e4cfdd93..9d85253109 100644 --- a/configs/ls2080aqds_sdcard_defconfig +++ b/configs/ls2080aqds_sdcard_defconfig @@ -72,6 +72,7 @@ CONFIG_SATA=y CONFIG_SATA_CEVA=y CONFIG_DYNAMIC_DDR_CLK_FREQ=y CONFIG_DIMM_SLOTS_PER_CTLR=2 +CONFIG_SYS_FSL_DDR_MAIN_NUM_CTRLS=2 CONFIG_DDR_ECC=y CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y CONFIG_SYS_FSL_DDR_INTLV_256B=y diff --git a/configs/ls2080ardb_SECURE_BOOT_defconfig b/configs/ls2080ardb_SECURE_BOOT_defconfig index 5378876f11..46dde0b6b8 100644 --- a/configs/ls2080ardb_SECURE_BOOT_defconfig +++ b/configs/ls2080ardb_SECURE_BOOT_defconfig @@ -58,6 +58,7 @@ CONFIG_SATA=y CONFIG_SATA_CEVA=y CONFIG_DDR_CLK_FREQ=133333333 CONFIG_DIMM_SLOTS_PER_CTLR=2 +CONFIG_SYS_FSL_DDR_MAIN_NUM_CTRLS=2 CONFIG_DDR_ECC=y CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y CONFIG_SYS_FSL_DDR_INTLV_256B=y diff --git a/configs/ls2080ardb_defconfig b/configs/ls2080ardb_defconfig index 6570a466e0..87129967f2 100644 --- a/configs/ls2080ardb_defconfig +++ b/configs/ls2080ardb_defconfig @@ -61,6 +61,7 @@ CONFIG_SATA_CEVA=y CONFIG_FSL_CAAM=y CONFIG_DDR_CLK_FREQ=133333333 CONFIG_DIMM_SLOTS_PER_CTLR=2 +CONFIG_SYS_FSL_DDR_MAIN_NUM_CTRLS=2 CONFIG_DDR_ECC=y CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y CONFIG_SYS_FSL_DDR_INTLV_256B=y diff --git a/configs/ls2080ardb_nand_defconfig b/configs/ls2080ardb_nand_defconfig index 7c87f890c2..da463ebf42 100644 --- a/configs/ls2080ardb_nand_defconfig +++ b/configs/ls2080ardb_nand_defconfig @@ -81,6 +81,7 @@ CONFIG_SATA_CEVA=y CONFIG_FSL_CAAM=y CONFIG_DDR_CLK_FREQ=133333333 CONFIG_DIMM_SLOTS_PER_CTLR=2 +CONFIG_SYS_FSL_DDR_MAIN_NUM_CTRLS=2 CONFIG_DDR_ECC=y CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y CONFIG_SYS_FSL_DDR_INTLV_256B=y diff --git a/configs/ls2081ardb_defconfig b/configs/ls2081ardb_defconfig index a426d6d48f..cc4bbaca43 100644 --- a/configs/ls2081ardb_defconfig +++ b/configs/ls2081ardb_defconfig @@ -59,6 +59,7 @@ CONFIG_SATA_CEVA=y CONFIG_FSL_CAAM=y CONFIG_DDR_CLK_FREQ=133333333 CONFIG_DIMM_SLOTS_PER_CTLR=2 +CONFIG_SYS_FSL_DDR_MAIN_NUM_CTRLS=2 CONFIG_DDR_ECC=y CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y CONFIG_SYS_FSL_DDR_INTLV_256B=y diff --git a/configs/ls2088aqds_tfa_defconfig b/configs/ls2088aqds_tfa_defconfig index f082fa52bc..c5cc05bd3a 100644 --- a/configs/ls2088aqds_tfa_defconfig +++ b/configs/ls2088aqds_tfa_defconfig @@ -64,6 +64,7 @@ CONFIG_SATA_CEVA=y CONFIG_FSL_CAAM=y CONFIG_DYNAMIC_DDR_CLK_FREQ=y CONFIG_DIMM_SLOTS_PER_CTLR=2 +CONFIG_SYS_FSL_DDR_MAIN_NUM_CTRLS=2 CONFIG_DDR_ECC=y CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y CONFIG_SYS_FSL_DDR_INTLV_256B=y diff --git a/configs/ls2088ardb_qspi_SECURE_BOOT_defconfig b/configs/ls2088ardb_qspi_SECURE_BOOT_defconfig index 1972fc908f..008ee1f023 100644 --- a/configs/ls2088ardb_qspi_SECURE_BOOT_defconfig +++ b/configs/ls2088ardb_qspi_SECURE_BOOT_defconfig @@ -54,6 +54,7 @@ CONFIG_SATA=y CONFIG_SATA_CEVA=y CONFIG_DDR_CLK_FREQ=133333333 CONFIG_DIMM_SLOTS_PER_CTLR=2 +CONFIG_SYS_FSL_DDR_MAIN_NUM_CTRLS=2 CONFIG_DDR_ECC=y CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y CONFIG_SYS_FSL_DDR_INTLV_256B=y diff --git a/configs/ls2088ardb_qspi_defconfig b/configs/ls2088ardb_qspi_defconfig index dedc191edc..bcf869ff12 100644 --- a/configs/ls2088ardb_qspi_defconfig +++ b/configs/ls2088ardb_qspi_defconfig @@ -61,6 +61,7 @@ CONFIG_SATA_CEVA=y CONFIG_FSL_CAAM=y CONFIG_DDR_CLK_FREQ=133333333 CONFIG_DIMM_SLOTS_PER_CTLR=2 +CONFIG_SYS_FSL_DDR_MAIN_NUM_CTRLS=2 CONFIG_DDR_ECC=y CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y CONFIG_SYS_FSL_DDR_INTLV_256B=y diff --git a/configs/ls2088ardb_tfa_SECURE_BOOT_defconfig b/configs/ls2088ardb_tfa_SECURE_BOOT_defconfig index 1674a2ce09..f633af34bb 100644 --- a/configs/ls2088ardb_tfa_SECURE_BOOT_defconfig +++ b/configs/ls2088ardb_tfa_SECURE_BOOT_defconfig @@ -59,6 +59,7 @@ CONFIG_SATA=y CONFIG_SATA_CEVA=y CONFIG_DDR_CLK_FREQ=133333333 CONFIG_DIMM_SLOTS_PER_CTLR=2 +CONFIG_SYS_FSL_DDR_MAIN_NUM_CTRLS=2 CONFIG_DDR_ECC=y CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y CONFIG_SYS_FSL_DDR_INTLV_256B=y diff --git a/configs/ls2088ardb_tfa_defconfig b/configs/ls2088ardb_tfa_defconfig index 071db6b1d2..3d8e201db1 100644 --- a/configs/ls2088ardb_tfa_defconfig +++ b/configs/ls2088ardb_tfa_defconfig @@ -66,6 +66,7 @@ CONFIG_SATA_CEVA=y CONFIG_FSL_CAAM=y CONFIG_DDR_CLK_FREQ=133333333 CONFIG_DIMM_SLOTS_PER_CTLR=2 +CONFIG_SYS_FSL_DDR_MAIN_NUM_CTRLS=2 CONFIG_DDR_ECC=y CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y CONFIG_SYS_FSL_DDR_INTLV_256B=y diff --git a/drivers/ddr/fsl/Kconfig b/drivers/ddr/fsl/Kconfig index 22400a9b8b..7f8f3570dd 100644 --- a/drivers/ddr/fsl/Kconfig +++ b/drivers/ddr/fsl/Kconfig @@ -40,6 +40,9 @@ config FSL_DDR_SYNC_REFRESH config FSL_DDR_FIRST_SLOT_QUAD_CAPABLE bool +config SYS_FSL_OTHER_DDR_NUM_CTRLS + bool + menu "Freescale DDR controllers" depends on SYS_FSL_DDR @@ -63,6 +66,10 @@ config DIMM_SLOTS_PER_CTLR int "Number of DIMM slots per controller" default 1 +config SYS_FSL_DDR_MAIN_NUM_CTRLS + int "Number of controllers used as main memory" + default SYS_NUM_DDR_CTLRS + config SYS_FSL_DDR_VER int default 50 if SYS_FSL_DDR_VER_50 diff --git a/include/configs/kontron_sl28.h b/include/configs/kontron_sl28.h index 2373abf3e3..38063ba484 100644 --- a/include/configs/kontron_sl28.h +++ b/include/configs/kontron_sl28.h @@ -23,7 +23,6 @@ #define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY 0 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE #define CONFIG_SYS_DDR_BLOCK2_BASE 0x2080000000ULL -#define CONFIG_SYS_FSL_DDR_MAIN_NUM_CTRLS 1 /* early stack pointer */ diff --git a/include/configs/ls1028a_common.h b/include/configs/ls1028a_common.h index b104524bec..8413e68f3a 100644 --- a/include/configs/ls1028a_common.h +++ b/include/configs/ls1028a_common.h @@ -17,7 +17,6 @@ #define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY 0 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE #define CONFIG_SYS_DDR_BLOCK2_BASE 0x2080000000ULL -#define CONFIG_SYS_FSL_DDR_MAIN_NUM_CTRLS 1 /* * SMP Definitinos diff --git a/include/configs/ls1088a_common.h b/include/configs/ls1088a_common.h index 4b8462da7b..21afe80e70 100644 --- a/include/configs/ls1088a_common.h +++ b/include/configs/ls1088a_common.h @@ -34,7 +34,6 @@ #define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY 0 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE #define CONFIG_SYS_DDR_BLOCK2_BASE 0x8080000000ULL -#define CONFIG_SYS_FSL_DDR_MAIN_NUM_CTRLS 1 /* * SMP Definitinos */ diff --git a/include/configs/ls2080a_common.h b/include/configs/ls2080a_common.h index ba5af6c34d..e170b5aa2c 100644 --- a/include/configs/ls2080a_common.h +++ b/include/configs/ls2080a_common.h @@ -21,15 +21,12 @@ #define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY 0 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE #define CONFIG_SYS_DDR_BLOCK2_BASE 0x8080000000ULL -#define CONFIG_SYS_FSL_DDR_MAIN_NUM_CTRLS 2 /* * SMP Definitinos */ #define CPU_RELEASE_ADDR secondary_boot_addr -#define CONFIG_SYS_FSL_OTHER_DDR_NUM_CTRLS - /* * This is not an accurate number. It is used in start.S. The frequency * will be udpated later when get_bus_freq(0) is available. diff --git a/include/configs/lx2160a_common.h b/include/configs/lx2160a_common.h index 61870717e8..d39c0032c4 100644 --- a/include/configs/lx2160a_common.h +++ b/include/configs/lx2160a_common.h @@ -17,7 +17,6 @@ #define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000UL #define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY 0 #define CONFIG_SYS_DDR_BLOCK2_BASE 0x2080000000ULL -#define CONFIG_SYS_FSL_DDR_MAIN_NUM_CTRLS 2 #define CONFIG_SYS_SDRAM_SIZE 0x200000000UL #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE #define CONFIG_MEM_INIT_VALUE 0xdeadbeef diff --git a/include/fsl_ddr.h b/include/fsl_ddr.h index 025d7a1e74..24229f6bc4 100644 --- a/include/fsl_ddr.h +++ b/include/fsl_ddr.h @@ -14,11 +14,6 @@ struct cmd_tbl; -#ifndef CONFIG_SYS_FSL_DDR_MAIN_NUM_CTRLS -/* All controllers are for main memory */ -#define CONFIG_SYS_FSL_DDR_MAIN_NUM_CTRLS CONFIG_SYS_NUM_DDR_CTLRS -#endif - #ifdef CONFIG_SYS_FSL_DDR_LE #define ddr_in32(a) in_le32(a) #define ddr_out32(a, v) out_le32(a, v)