From: Patrick Delaunay Date: Tue, 14 Sep 2021 12:14:52 +0000 (+0200) Subject: arm: dts: stm32mp1: use ssbl partition name for U-Boot X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=cf39d0c29dcf332d7055d0545fc95e3379d91a62;p=u-boot.git arm: dts: stm32mp1: use ssbl partition name for U-Boot Continue to use the "ssbl" name for GPT partition of secondary boot stage = U-Boot for basic boot with SPL to avoid to disturb existing user. The "fip" partition name is only used for TFA_BOOT with FIP, it is a TF-A BL2 requirement; it the default configuration for STMicroelectronics boards. Fixes: b73e8bf453f8 ("arm: stm32mp: add defconfig for trusted boot with FIP") Signed-off-by: Patrick Delaunay Reviewed-by: Patrice Chotard --- diff --git a/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi b/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi index 0101962ea5..15a04ae927 100644 --- a/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi +++ b/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi @@ -21,11 +21,13 @@ st,stm32prog-gpios = <&gpioa 14 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; }; -#ifdef CONFIG_STM32MP15x_STM32IMAGE +#if defined(CONFIG_STM32MP15x_STM32IMAGE) || defined(CONFIG_SPL) config { u-boot,mmc-env-partition = "ssbl"; }; +#endif +#ifdef CONFIG_STM32MP15x_STM32IMAGE /* only needed for boot with TF-A, witout FIP support */ firmware { optee { diff --git a/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi b/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi index 32777384c6..408abaf52f 100644 --- a/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi +++ b/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi @@ -20,11 +20,13 @@ st,stm32prog-gpios = <&gpioa 14 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; }; -#ifdef CONFIG_STM32MP15x_STM32IMAGE +#if defined(CONFIG_STM32MP15x_STM32IMAGE) || defined(CONFIG_SPL) config { u-boot,mmc-env-partition = "ssbl"; }; +#endif +#ifdef CONFIG_STM32MP15x_STM32IMAGE /* only needed for boot with TF-A, witout FIP support */ firmware { optee {