From: Nagabhushana Netagunte Date: Sun, 4 Sep 2011 02:19:28 +0000 (-0400) Subject: da850: add support to wake up DSP during board init X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=cf2c24e3996e49a26b449ab7daf843856b35b5c8;p=u-boot.git da850: add support to wake up DSP during board init add support for DSP wake-up by default on DA850/OMAP-L138 during board initialization. Enable hwconfig environment and added extra env setting through CONFIG_EXTRA_ENV_SETTINGS. To prevent DSP from being woken up,set the environment variable as, set hwconfig "dsp:wake=no" Signed-off-by: Sekhar Nori Signed-off-by: Nagabhushana Netagunte Signed-off-by: Sandeep Paulraj --- diff --git a/arch/arm/include/asm/arch-davinci/hardware.h b/arch/arm/include/asm/arch-davinci/hardware.h index 646e2ced82..4a3af7d3b6 100644 --- a/arch/arm/include/asm/arch-davinci/hardware.h +++ b/arch/arm/include/asm/arch-davinci/hardware.h @@ -153,7 +153,11 @@ typedef volatile unsigned int * dv_reg_p; #define DAVINCI_DDR_EMIF_DATA_BASE 0xc0000000 #define DAVINCI_INTC_BASE 0xfffee000 #define DAVINCI_BOOTCFG_BASE 0x01c14000 +#define DAVINCI_L3CBARAM_BASE 0x80000000 #define JTAG_ID_REG (DAVINCI_BOOTCFG_BASE + 0x18) +#define CHIP_REV_ID_REG (DAVINCI_BOOTCFG_BASE + 0x24) +#define HOST1CFG (DAVINCI_BOOTCFG_BASE + 0x44) +#define PSC0_MDCTL (DAVINCI_PSC0_BASE + 0xa00) #define GPIO_BANK2_REG_DIR_ADDR (DAVINCI_GPIO_BASE + 0x38) #define GPIO_BANK2_REG_OPDATA_ADDR (DAVINCI_GPIO_BASE + 0x3c) diff --git a/board/davinci/da8xxevm/da850evm.c b/board/davinci/da8xxevm/da850evm.c index d3d965cdab..8c3d64e787 100644 --- a/board/davinci/da8xxevm/da850evm.c +++ b/board/davinci/da8xxevm/da850evm.c @@ -30,6 +30,7 @@ #include #include #include +#include DECLARE_GLOBAL_DATA_PTR; @@ -163,6 +164,64 @@ const struct pinmux_config nor_pins[] = { #endif #endif /* CONFIG_DRIVER_TI_EMAC */ +void dsp_lpsc_on(unsigned domain, unsigned int id) +{ + dv_reg_p mdstat, mdctl, ptstat, ptcmd; + struct davinci_psc_regs *psc_regs; + + psc_regs = davinci_psc0_regs; + mdstat = &psc_regs->psc0.mdstat[id]; + mdctl = &psc_regs->psc0.mdctl[id]; + ptstat = &psc_regs->ptstat; + ptcmd = &psc_regs->ptcmd; + + while (*ptstat & (0x1 << domain)) + ; + + if ((*mdstat & 0x1f) == 0x03) + return; /* Already on and enabled */ + + *mdctl |= 0x03; + + *ptcmd = 0x1 << domain; + + while (*ptstat & (0x1 << domain)) + ; + while ((*mdstat & 0x1f) != 0x03) + ; /* Probably an overkill... */ +} + +static void dspwake(void) +{ + unsigned *resetvect = (unsigned *)DAVINCI_L3CBARAM_BASE; + u32 val; + + /* if the device is ARM only, return */ + if ((readl(CHIP_REV_ID_REG) & 0x3f) == 0x10) + return; + + if (hwconfig_subarg_cmp_f("dsp", "wake", "no", NULL)) + return; + + *resetvect++ = 0x1E000; /* DSP Idle */ + /* clear out the next 10 words as NOP */ + memset(resetvect, 0, sizeof(unsigned) *10); + + /* setup the DSP reset vector */ + writel(DAVINCI_L3CBARAM_BASE, HOST1CFG); + + dsp_lpsc_on(1, DAVINCI_LPSC_GEM); + val = readl(PSC0_MDCTL + (15 * 4)); + val |= 0x100; + writel(val, (PSC0_MDCTL + (15 * 4))); +} + +int misc_init_r(void) +{ + dspwake(); + return 0; +} + static const struct pinmux_resource pinmuxes[] = { #ifdef CONFIG_SPI_FLASH PINMUX_ITEM(spi1_pins), diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h index cf0ceac4e3..9c924896b3 100644 --- a/include/configs/da850evm.h +++ b/include/configs/da850evm.h @@ -159,6 +159,7 @@ /* * U-Boot general configuration */ +#define CONFIG_MISC_INIT_R #define CONFIG_BOOTFILE "uImage" /* Boot file name */ #define CONFIG_SYS_PROMPT "U-Boot > " /* Command Prompt */ #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ @@ -179,12 +180,14 @@ * Linux Information */ #define LINUX_BOOT_PARAM_ADDR (PHYS_SDRAM_1 + 0x100) +#define CONFIG_HWCONFIG /* enable hwconfig */ #define CONFIG_CMDLINE_TAG #define CONFIG_REVISION_TAG #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_BOOTARGS \ "mem=32M console=ttyS2,115200n8 root=/dev/mtdblock2 rw noinitrd ip=dhcp" #define CONFIG_BOOTDELAY 3 +#define CONFIG_EXTRA_ENV_SETTINGS "hwconfig=dsp:wake=yes" /* * U-Boot commands