From: Andre Przywara Date: Mon, 12 Sep 2022 23:52:52 +0000 (+0100) Subject: sunxi: dts: arm: update devicetree files X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=ceda40a8e641b2b085e1c79573f06c4f3336bc5b;p=u-boot.git sunxi: dts: arm: update devicetree files Update the devicetree files from the Linux kernel, version v6.0-rc4. This is covering the 32-bit SoCs, from arch/arm/boot/dts/. This avoids the not backwards-compatible r_intc binding change, to allow older kernels to boot, but the other nodes are updated. Not much change here, the vast majority is actually cosmetic: node names and using symbolic names for the the RTC clocks. The R40 boards gain DVFS support. Some A23/A33 tablet DTs are unified into a single file. Signed-off-by: Andre Przywara Reviewed-by: Jernej Skrabec --- diff --git a/arch/arm/dts/sun4i-a10-inet9f-rev03.dts b/arch/arm/dts/sun4i-a10-inet9f-rev03.dts index 0a562b2cc5..62e7aa587f 100644 --- a/arch/arm/dts/sun4i-a10-inet9f-rev03.dts +++ b/arch/arm/dts/sun4i-a10-inet9f-rev03.dts @@ -63,7 +63,7 @@ compatible = "gpio-keys-polled"; poll-interval = <20>; - left-joystick-left { + event-left-joystick-left { label = "Left Joystick Left"; linux,code = ; linux,input-type = ; @@ -71,7 +71,7 @@ gpios = <&pio 0 6 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA6 */ }; - left-joystick-right { + event-left-joystick-right { label = "Left Joystick Right"; linux,code = ; linux,input-type = ; @@ -79,7 +79,7 @@ gpios = <&pio 0 5 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA5 */ }; - left-joystick-up { + event-left-joystick-up { label = "Left Joystick Up"; linux,code = ; linux,input-type = ; @@ -87,7 +87,7 @@ gpios = <&pio 0 8 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA8 */ }; - left-joystick-down { + event-left-joystick-down { label = "Left Joystick Down"; linux,code = ; linux,input-type = ; @@ -95,7 +95,7 @@ gpios = <&pio 0 9 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA9 */ }; - right-joystick-left { + event-right-joystick-left { label = "Right Joystick Left"; linux,code = ; linux,input-type = ; @@ -103,7 +103,7 @@ gpios = <&pio 0 1 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA1 */ }; - right-joystick-right { + event-right-joystick-right { label = "Right Joystick Right"; linux,code = ; linux,input-type = ; @@ -111,7 +111,7 @@ gpios = <&pio 0 0 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA0 */ }; - right-joystick-up { + event-right-joystick-up { label = "Right Joystick Up"; linux,code = ; linux,input-type = ; @@ -119,7 +119,7 @@ gpios = <&pio 0 3 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA3 */ }; - right-joystick-down { + event-right-joystick-down { label = "Right Joystick Down"; linux,code = ; linux,input-type = ; @@ -127,7 +127,7 @@ gpios = <&pio 0 4 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA4 */ }; - dpad-left { + event-dpad-left { label = "DPad Left"; linux,code = ; linux,input-type = ; @@ -135,7 +135,7 @@ gpios = <&pio 7 23 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH23 */ }; - dpad-right { + event-dpad-right { label = "DPad Right"; linux,code = ; linux,input-type = ; @@ -143,7 +143,7 @@ gpios = <&pio 7 24 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH24 */ }; - dpad-up { + event-dpad-up { label = "DPad Up"; linux,code = ; linux,input-type = ; @@ -151,7 +151,7 @@ gpios = <&pio 7 25 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH25 */ }; - dpad-down { + event-dpad-down { label = "DPad Down"; linux,code = ; linux,input-type = ; @@ -159,49 +159,49 @@ gpios = <&pio 7 26 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH26 */ }; - x { + event-x { label = "Button X"; linux,code = ; gpios = <&pio 0 16 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA16 */ }; - y { + event-y { label = "Button Y"; linux,code = ; gpios = <&pio 0 14 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA14 */ }; - a { + event-a { label = "Button A"; linux,code = ; gpios = <&pio 0 17 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA17 */ }; - b { + event-b { label = "Button B"; linux,code = ; gpios = <&pio 0 15 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA15 */ }; - select { + event-select { label = "Select Button"; linux,code = ; gpios = <&pio 0 11 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA11 */ }; - start { + event-start { label = "Start Button"; linux,code = ; gpios = <&pio 0 12 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA12 */ }; - top-left { + event-top-left { label = "Top Left Button"; linux,code = ; gpios = <&pio 7 22 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH22 */ }; - top-right { + event-top-right { label = "Top Right Button"; linux,code = ; gpios = <&pio 0 13 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA13 */ diff --git a/arch/arm/dts/sun4i-a10-pcduino.dts b/arch/arm/dts/sun4i-a10-pcduino.dts index 1ac82376ba..a332d61fd5 100644 --- a/arch/arm/dts/sun4i-a10-pcduino.dts +++ b/arch/arm/dts/sun4i-a10-pcduino.dts @@ -77,19 +77,19 @@ gpio-keys { compatible = "gpio-keys"; - back { + key-back { label = "Key Back"; linux,code = ; gpios = <&pio 7 17 GPIO_ACTIVE_LOW>; }; - home { + key-home { label = "Key Home"; linux,code = ; gpios = <&pio 7 18 GPIO_ACTIVE_LOW>; }; - menu { + key-menu { label = "Key Menu"; linux,code = ; gpios = <&pio 7 19 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/dts/sun5i-a13-licheepi-one.dts b/arch/arm/dts/sun5i-a13-licheepi-one.dts index 2ce361f8fe..3a6c4bd0a4 100644 --- a/arch/arm/dts/sun5i-a13-licheepi-one.dts +++ b/arch/arm/dts/sun5i-a13-licheepi-one.dts @@ -67,18 +67,18 @@ compatible = "gpio-leds"; led-0 { - label ="licheepi:red:usr"; + label = "licheepi:red:usr"; gpios = <&pio 2 5 GPIO_ACTIVE_LOW>; }; led-1 { - label ="licheepi:green:usr"; + label = "licheepi:green:usr"; gpios = <&pio 2 19 GPIO_ACTIVE_LOW>; default-state = "on"; }; led-2 { - label ="licheepi:blue:usr"; + label = "licheepi:blue:usr"; gpios = <&pio 2 4 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/dts/sun6i-a31.dtsi b/arch/arm/dts/sun6i-a31.dtsi index d7d920e9e4..f6701ece7b 100644 --- a/arch/arm/dts/sun6i-a31.dtsi +++ b/arch/arm/dts/sun6i-a31.dtsi @@ -46,6 +46,7 @@ #include #include +#include #include / { @@ -598,7 +599,7 @@ ccu: clock@1c20000 { compatible = "allwinner,sun6i-a31-ccu"; reg = <0x01c20000 0x400>; - clocks = <&osc24M>, <&rtc 0>; + clocks = <&osc24M>, <&rtc CLK_OSC32K>; clock-names = "hosc", "losc"; #clock-cells = <1>; #reset-cells = <1>; @@ -611,7 +612,8 @@ , , ; - clocks = <&ccu CLK_APB1_PIO>, <&osc24M>, <&rtc 0>; + clocks = <&ccu CLK_APB1_PIO>, <&osc24M>, + <&rtc CLK_OSC32K>; clock-names = "apb", "hosc", "losc"; gpio-controller; interrupt-controller; @@ -1316,7 +1318,7 @@ ar100: ar100_clk { compatible = "allwinner,sun6i-a31-ar100-clk"; #clock-cells = <0>; - clocks = <&rtc 0>, <&osc24M>, + clocks = <&rtc CLK_OSC32K>, <&osc24M>, <&ccu CLK_PLL_PERIPH>, <&ccu CLK_PLL_PERIPH>; clock-output-names = "ar100"; @@ -1351,7 +1353,7 @@ ir_clk: ir_clk { #clock-cells = <0>; compatible = "allwinner,sun4i-a10-mod0-clk"; - clocks = <&rtc 0>, <&osc24M>; + clocks = <&rtc CLK_OSC32K>, <&osc24M>; clock-output-names = "ir"; }; @@ -1381,9 +1383,8 @@ reg = <0x01f02c00 0x400>; interrupts = , ; - clocks = <&apb0_gates 0>, <&osc24M>, <&rtc 0>; + clocks = <&apb0_gates 0>, <&osc24M>, <&rtc CLK_OSC32K>; clock-names = "apb", "hosc", "losc"; - resets = <&apb0_rst 0>; gpio-controller; interrupt-controller; #interrupt-cells = <3>; diff --git a/arch/arm/dts/sun7i-a20-pcduino3.dts b/arch/arm/dts/sun7i-a20-pcduino3.dts index 4f8d55d3ba..928b86a95f 100644 --- a/arch/arm/dts/sun7i-a20-pcduino3.dts +++ b/arch/arm/dts/sun7i-a20-pcduino3.dts @@ -78,19 +78,19 @@ gpio-keys { compatible = "gpio-keys"; - back { + key-back { label = "Key Back"; linux,code = ; gpios = <&pio 7 17 GPIO_ACTIVE_LOW>; }; - home { + key-home { label = "Key Home"; linux,code = ; gpios = <&pio 7 18 GPIO_ACTIVE_LOW>; }; - menu { + key-menu { label = "Key Menu"; linux,code = ; gpios = <&pio 7 19 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/dts/sun8i-a23-a33.dtsi b/arch/arm/dts/sun8i-a23-a33.dtsi index a42fac676b..06809c3a1f 100644 --- a/arch/arm/dts/sun8i-a23-a33.dtsi +++ b/arch/arm/dts/sun8i-a23-a33.dtsi @@ -44,6 +44,7 @@ #include +#include #include #include @@ -329,7 +330,7 @@ ccu: clock@1c20000 { reg = <0x01c20000 0x400>; - clocks = <&osc24M>, <&rtc 0>; + clocks = <&osc24M>, <&rtc CLK_OSC32K>; clock-names = "hosc", "losc"; #clock-cells = <1>; #reset-cells = <1>; @@ -339,7 +340,8 @@ /* compatible gets set in SoC specific dtsi file */ reg = <0x01c20800 0x400>; /* interrupts get set in SoC specific dtsi file */ - clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&rtc 0>; + clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, + <&rtc CLK_OSC32K>; clock-names = "apb", "hosc", "losc"; gpio-controller; interrupt-controller; @@ -806,9 +808,8 @@ compatible = "allwinner,sun8i-a23-r-pinctrl"; reg = <0x01f02c00 0x400>; interrupts = ; - clocks = <&apb0_gates 0>, <&osc24M>, <&rtc 0>; + clocks = <&apb0_gates 0>, <&osc24M>, <&rtc CLK_OSC32K>; clock-names = "apb", "hosc", "losc"; - resets = <&apb0_rst 0>; gpio-controller; interrupt-controller; #interrupt-cells = <3>; diff --git a/arch/arm/dts/sun8i-a23-ippo-q8h-v1.2.dts b/arch/arm/dts/sun8i-a23-ippo-q8h-v1.2.dts deleted file mode 100644 index 51097c77a1..0000000000 --- a/arch/arm/dts/sun8i-a23-ippo-q8h-v1.2.dts +++ /dev/null @@ -1,73 +0,0 @@ -/* - * Copyright 2015 Hans de Goede - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/dts-v1/; -#include "sun8i-a23.dtsi" -#include "sun8i-q8-common.dtsi" - -/ { - model = "Q8 A23 Tablet"; - compatible = "allwinner,q8-a23", "allwinner,sun8i-a23"; -}; - -&codec { - allwinner,pa-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */ - allwinner,audio-routing = - "Headphone", "HP", - "Headphone", "HPCOM", - "Speaker", "HP", - "MIC1", "Mic", - "MIC2", "Headset Mic", - "Mic", "MBIAS", - "Headset Mic", "HBIAS"; - status = "okay"; -}; - -&panel { - compatible = "bananapi,s070wv20-ct16"; -}; - -&tcon0_out { - tcon0_out_lcd: endpoint { - remote-endpoint = <&panel_input>; - }; -}; diff --git a/arch/arm/dts/sun8i-a23-ippo-q8h-v1.2.dts b/arch/arm/dts/sun8i-a23-ippo-q8h-v1.2.dts new file mode 120000 index 0000000000..c2f22fc338 --- /dev/null +++ b/arch/arm/dts/sun8i-a23-ippo-q8h-v1.2.dts @@ -0,0 +1 @@ +sun8i-a23-q8-tablet.dts \ No newline at end of file diff --git a/arch/arm/dts/sun8i-a23-ippo-q8h-v5.dts b/arch/arm/dts/sun8i-a23-ippo-q8h-v5.dts deleted file mode 100644 index 51097c77a1..0000000000 --- a/arch/arm/dts/sun8i-a23-ippo-q8h-v5.dts +++ /dev/null @@ -1,73 +0,0 @@ -/* - * Copyright 2015 Hans de Goede - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/dts-v1/; -#include "sun8i-a23.dtsi" -#include "sun8i-q8-common.dtsi" - -/ { - model = "Q8 A23 Tablet"; - compatible = "allwinner,q8-a23", "allwinner,sun8i-a23"; -}; - -&codec { - allwinner,pa-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */ - allwinner,audio-routing = - "Headphone", "HP", - "Headphone", "HPCOM", - "Speaker", "HP", - "MIC1", "Mic", - "MIC2", "Headset Mic", - "Mic", "MBIAS", - "Headset Mic", "HBIAS"; - status = "okay"; -}; - -&panel { - compatible = "bananapi,s070wv20-ct16"; -}; - -&tcon0_out { - tcon0_out_lcd: endpoint { - remote-endpoint = <&panel_input>; - }; -}; diff --git a/arch/arm/dts/sun8i-a23-ippo-q8h-v5.dts b/arch/arm/dts/sun8i-a23-ippo-q8h-v5.dts new file mode 120000 index 0000000000..c2f22fc338 --- /dev/null +++ b/arch/arm/dts/sun8i-a23-ippo-q8h-v5.dts @@ -0,0 +1 @@ +sun8i-a23-q8-tablet.dts \ No newline at end of file diff --git a/arch/arm/dts/sun8i-a33-et-q8-v1.6.dts b/arch/arm/dts/sun8i-a33-et-q8-v1.6.dts deleted file mode 100644 index 9c5750c256..0000000000 --- a/arch/arm/dts/sun8i-a33-et-q8-v1.6.dts +++ /dev/null @@ -1,57 +0,0 @@ -/* - * Copyright 2015 Hans de Goede - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/dts-v1/; -#include "sun8i-a33.dtsi" -#include "sun8i-q8-common.dtsi" - -/ { - model = "Q8 A33 Tablet"; - compatible = "allwinner,q8-a33", "allwinner,sun8i-a33"; -}; - -&tcon0_out { - tcon0_out_lcd: endpoint@0 { - reg = <0>; - remote-endpoint = <&panel_input>; - }; -}; diff --git a/arch/arm/dts/sun8i-a33-et-q8-v1.6.dts b/arch/arm/dts/sun8i-a33-et-q8-v1.6.dts new file mode 120000 index 0000000000..4519fd791a --- /dev/null +++ b/arch/arm/dts/sun8i-a33-et-q8-v1.6.dts @@ -0,0 +1 @@ +sun8i-a33-q8-tablet.dts \ No newline at end of file diff --git a/arch/arm/dts/sun8i-a33-ippo-q8h-v1.2.dts b/arch/arm/dts/sun8i-a33-ippo-q8h-v1.2.dts deleted file mode 100644 index 9c5750c256..0000000000 --- a/arch/arm/dts/sun8i-a33-ippo-q8h-v1.2.dts +++ /dev/null @@ -1,57 +0,0 @@ -/* - * Copyright 2015 Hans de Goede - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/dts-v1/; -#include "sun8i-a33.dtsi" -#include "sun8i-q8-common.dtsi" - -/ { - model = "Q8 A33 Tablet"; - compatible = "allwinner,q8-a33", "allwinner,sun8i-a33"; -}; - -&tcon0_out { - tcon0_out_lcd: endpoint@0 { - reg = <0>; - remote-endpoint = <&panel_input>; - }; -}; diff --git a/arch/arm/dts/sun8i-a33-ippo-q8h-v1.2.dts b/arch/arm/dts/sun8i-a33-ippo-q8h-v1.2.dts new file mode 120000 index 0000000000..4519fd791a --- /dev/null +++ b/arch/arm/dts/sun8i-a33-ippo-q8h-v1.2.dts @@ -0,0 +1 @@ +sun8i-a33-q8-tablet.dts \ No newline at end of file diff --git a/arch/arm/dts/sun8i-h2-plus-bananapi-m2-zero.dts b/arch/arm/dts/sun8i-h2-plus-bananapi-m2-zero.dts index d5c7b7984d..d729b7c705 100644 --- a/arch/arm/dts/sun8i-h2-plus-bananapi-m2-zero.dts +++ b/arch/arm/dts/sun8i-h2-plus-bananapi-m2-zero.dts @@ -47,10 +47,10 @@ }; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; - sw4 { + switch-4 { label = "power"; linux,code = ; gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; @@ -106,7 +106,7 @@ wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ - clocks = <&rtc 1>; + clocks = <&rtc CLK_OSC32K_FANOUT>; clock-names = "ext_clock"; }; }; @@ -181,7 +181,7 @@ bluetooth { compatible = "brcm,bcm43438-bt"; max-speed = <1500000>; - clocks = <&rtc 1>; + clocks = <&rtc CLK_OSC32K_FANOUT>; clock-names = "lpo"; vbat-supply = <®_vcc3v3>; vddio-supply = <®_vcc3v3>; diff --git a/arch/arm/dts/sun8i-h2-plus-orangepi-zero.dts b/arch/arm/dts/sun8i-h2-plus-orangepi-zero.dts index f19ed981da..3706216ffb 100644 --- a/arch/arm/dts/sun8i-h2-plus-orangepi-zero.dts +++ b/arch/arm/dts/sun8i-h2-plus-orangepi-zero.dts @@ -169,7 +169,7 @@ flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "mxicy,mx25l1606e", "winbond,w25q128"; + compatible = "mxicy,mx25l1606e", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <40000000>; }; diff --git a/arch/arm/dts/sun8i-h3-beelink-x2.dts b/arch/arm/dts/sun8i-h3-beelink-x2.dts index cd9f655e4f..27a0d51289 100644 --- a/arch/arm/dts/sun8i-h3-beelink-x2.dts +++ b/arch/arm/dts/sun8i-h3-beelink-x2.dts @@ -93,10 +93,10 @@ }; }; - r-gpio-keys { + gpio-keys { compatible = "gpio-keys"; - power { + key-power { label = "power"; linux,code = ; gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; @@ -125,7 +125,7 @@ wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ - clocks = <&rtc 1>; + clocks = <&rtc CLK_OSC32K_FANOUT>; clock-names = "ext_clock"; }; }; diff --git a/arch/arm/dts/sun8i-h3-mapleboard-mp130.dts b/arch/arm/dts/sun8i-h3-mapleboard-mp130.dts index ff0a7a952e..f5c8ccc5b8 100644 --- a/arch/arm/dts/sun8i-h3-mapleboard-mp130.dts +++ b/arch/arm/dts/sun8i-h3-mapleboard-mp130.dts @@ -39,16 +39,16 @@ }; }; - r_gpio_keys { + gpio-keys { compatible = "gpio-keys"; - power { + key-power { label = "power"; linux,code = ; gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; /* PL3 */ }; - user { + key-user { label = "user"; linux,code = ; gpios = <&r_pio 0 4 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/dts/sun8i-h3-nanopi-duo2.dts b/arch/arm/dts/sun8i-h3-nanopi-duo2.dts index 8e7dfcffe1..43641cb823 100644 --- a/arch/arm/dts/sun8i-h3-nanopi-duo2.dts +++ b/arch/arm/dts/sun8i-h3-nanopi-duo2.dts @@ -37,10 +37,10 @@ }; }; - r_gpio_keys { + gpio-keys { compatible = "gpio-keys"; - k1 { + key-0 { label = "k1"; linux,code = ; gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; /* PL3 */ @@ -90,7 +90,7 @@ wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ - clocks = <&rtc 1>; + clocks = <&rtc CLK_OSC32K_FANOUT>; clock-names = "ext_clock"; }; @@ -151,7 +151,7 @@ bluetooth { compatible = "brcm,bcm43438-bt"; - clocks = <&rtc 1>; + clocks = <&rtc CLK_OSC32K_FANOUT>; clock-names = "lpo"; vbat-supply = <®_vcc3v3>; vddio-supply = <®_vcc3v3>; diff --git a/arch/arm/dts/sun8i-h3-nanopi-neo-air.dts b/arch/arm/dts/sun8i-h3-nanopi-neo-air.dts index cd3df12b65..9e1a33f94c 100644 --- a/arch/arm/dts/sun8i-h3-nanopi-neo-air.dts +++ b/arch/arm/dts/sun8i-h3-nanopi-neo-air.dts @@ -127,7 +127,7 @@ bluetooth { compatible = "brcm,bcm43438-bt"; - clocks = <&rtc 1>; + clocks = <&rtc CLK_OSC32K_FANOUT>; clock-names = "lpo"; vbat-supply = <®_vcc3v3>; vddio-supply = <®_vcc3v3>; diff --git a/arch/arm/dts/sun8i-h3-nanopi-r1.dts b/arch/arm/dts/sun8i-h3-nanopi-r1.dts index 26e2e6172e..42cd1131ad 100644 --- a/arch/arm/dts/sun8i-h3-nanopi-r1.dts +++ b/arch/arm/dts/sun8i-h3-nanopi-r1.dts @@ -46,7 +46,7 @@ wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ - clocks = <&rtc 1>; + clocks = <&rtc CLK_OSC32K_FANOUT>; clock-names = "ext_clock"; }; @@ -147,7 +147,7 @@ bluetooth { compatible = "brcm,bcm43438-bt"; - clocks = <&rtc 1>; + clocks = <&rtc CLK_OSC32K_FANOUT>; clock-names = "lpo"; vbat-supply = <®_vcc3v3>; vddio-supply = <®_vcc3v3>; diff --git a/arch/arm/dts/sun8i-h3-nanopi.dtsi b/arch/arm/dts/sun8i-h3-nanopi.dtsi index fc45d5aaa6..cf8413fba6 100644 --- a/arch/arm/dts/sun8i-h3-nanopi.dtsi +++ b/arch/arm/dts/sun8i-h3-nanopi.dtsi @@ -73,11 +73,10 @@ }; }; - r_gpio_keys { + gpio-keys { compatible = "gpio-keys"; - input-name = "k1"; - k1 { + key-0 { label = "k1"; linux,code = ; gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/dts/sun8i-h3-orangepi-2.dts b/arch/arm/dts/sun8i-h3-orangepi-2.dts index 9daffd90c1..f1f9dbead3 100644 --- a/arch/arm/dts/sun8i-h3-orangepi-2.dts +++ b/arch/arm/dts/sun8i-h3-orangepi-2.dts @@ -88,16 +88,16 @@ }; }; - r_gpio_keys { + gpio-keys { compatible = "gpio-keys"; - sw2 { + switch-2 { label = "sw2"; linux,code = ; gpios = <&r_pio 0 4 GPIO_ACTIVE_LOW>; }; - sw4 { + switch-4 { label = "sw4"; linux,code = ; gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/dts/sun8i-h3-orangepi-lite.dts b/arch/arm/dts/sun8i-h3-orangepi-lite.dts index 6f9c97add5..305b34a321 100644 --- a/arch/arm/dts/sun8i-h3-orangepi-lite.dts +++ b/arch/arm/dts/sun8i-h3-orangepi-lite.dts @@ -87,10 +87,10 @@ }; }; - r_gpio_keys { + gpio-keys { compatible = "gpio-keys"; - sw4 { + switch-4 { label = "sw4"; linux,code = ; gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/dts/sun8i-h3-orangepi-one.dts b/arch/arm/dts/sun8i-h3-orangepi-one.dts index 4759ba3f29..59f6f6d5e7 100644 --- a/arch/arm/dts/sun8i-h3-orangepi-one.dts +++ b/arch/arm/dts/sun8i-h3-orangepi-one.dts @@ -86,10 +86,10 @@ }; }; - r_gpio_keys { + gpio-keys { compatible = "gpio-keys"; - sw4 { + switch-4 { label = "sw4"; linux,code = ; gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/dts/sun8i-h3-orangepi-pc.dts b/arch/arm/dts/sun8i-h3-orangepi-pc.dts index 90f75fa85e..b96e015f54 100644 --- a/arch/arm/dts/sun8i-h3-orangepi-pc.dts +++ b/arch/arm/dts/sun8i-h3-orangepi-pc.dts @@ -86,10 +86,10 @@ }; }; - r_gpio_keys { + gpio-keys { compatible = "gpio-keys"; - sw4 { + switch-4 { label = "sw4"; linux,code = ; gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/dts/sun8i-r16-bananapi-m2m.dts b/arch/arm/dts/sun8i-r16-bananapi-m2m.dts index 293016d081..f97218e70c 100644 --- a/arch/arm/dts/sun8i-r16-bananapi-m2m.dts +++ b/arch/arm/dts/sun8i-r16-bananapi-m2m.dts @@ -91,7 +91,7 @@ wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL06 */ - clocks = <&rtc 1>; + clocks = <&rtc CLK_OSC32K_FANOUT>; clock-names = "ext_clock"; }; }; @@ -283,7 +283,7 @@ bluetooth { compatible = "brcm,bcm43438-bt"; - clocks = <&rtc 1>; + clocks = <&rtc CLK_OSC32K_FANOUT>; clock-names = "lpo"; vbat-supply = <®_dldo1>; vddio-supply = <®_aldo3>; diff --git a/arch/arm/dts/sun8i-r40-bananapi-m2-ultra.dts b/arch/arm/dts/sun8i-r40-bananapi-m2-ultra.dts index a6a1087a0c..28197bbcb1 100644 --- a/arch/arm/dts/sun8i-r40-bananapi-m2-ultra.dts +++ b/arch/arm/dts/sun8i-r40-bananapi-m2-ultra.dts @@ -43,6 +43,7 @@ /dts-v1/; #include "sun8i-r40.dtsi" +#include "sun8i-r40-cpu-opp.dtsi" #include @@ -113,6 +114,10 @@ status = "okay"; }; +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + &de { status = "okay"; }; diff --git a/arch/arm/dts/sun8i-r40-cpu-opp.dtsi b/arch/arm/dts/sun8i-r40-cpu-opp.dtsi new file mode 100644 index 0000000000..649928b361 --- /dev/null +++ b/arch/arm/dts/sun8i-r40-cpu-opp.dtsi @@ -0,0 +1,52 @@ +/{ + cpu0_opp_table: opp-table-cpu { + compatible = "operating-points-v2"; + opp-shared; + + opp-720000000 { + opp-hz = /bits/ 64 <720000000>; + opp-microvolt = <1000000 1000000 1300000>; + clock-latency-ns = <2000000>; + }; + + opp-912000000 { + opp-hz = /bits/ 64 <912000000>; + opp-microvolt = <1100000 1100000 1300000>; + clock-latency-ns = <2000000>; + }; + + opp-1008000000 { + opp-hz = /bits/ 64 <1008000000>; + opp-microvolt = <1160000 1160000 1300000>; + clock-latency-ns = <2000000>; + }; + + opp-1104000000 { + opp-hz = /bits/ 64 <1104000000>; + opp-microvolt = <1240000 1240000 1300000>; + clock-latency-ns = <2000000>; + }; + + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <1300000 1300000 1300000>; + clock-latency-ns = <2000000>; + }; + }; +}; + +&cpu0 { + operating-points-v2 = <&cpu0_opp_table>; +}; + +&cpu1 { + operating-points-v2 = <&cpu0_opp_table>; +}; + +&cpu2 { + operating-points-v2 = <&cpu0_opp_table>; +}; + +&cpu3 { + operating-points-v2 = <&cpu0_opp_table>; +}; diff --git a/arch/arm/dts/sun8i-r40-feta40i.dtsi b/arch/arm/dts/sun8i-r40-feta40i.dtsi index 265e0fa57a..9f39b5a2bb 100644 --- a/arch/arm/dts/sun8i-r40-feta40i.dtsi +++ b/arch/arm/dts/sun8i-r40-feta40i.dtsi @@ -5,6 +5,11 @@ // Copyright (C) 2017 Icenowy Zheng #include "sun8i-r40.dtsi" +#include "sun8i-r40-cpu-opp.dtsi" + +&cpu0 { + cpu-supply = <®_dcdc2>; +}; &i2c0 { status = "okay"; diff --git a/arch/arm/dts/sun8i-r40.dtsi b/arch/arm/dts/sun8i-r40.dtsi index 03d3e5f45a..4ef26d8f53 100644 --- a/arch/arm/dts/sun8i-r40.dtsi +++ b/arch/arm/dts/sun8i-r40.dtsi @@ -42,6 +42,7 @@ */ #include +#include #include #include #include @@ -84,24 +85,36 @@ compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <0>; + clocks = <&ccu CLK_CPU>; + clock-names = "cpu"; + #cooling-cells = <2>; }; cpu1: cpu@1 { compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <1>; + clocks = <&ccu CLK_CPU>; + clock-names = "cpu"; + #cooling-cells = <2>; }; cpu2: cpu@2 { compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <2>; + clocks = <&ccu CLK_CPU>; + clock-names = "cpu"; + #cooling-cells = <2>; }; cpu3: cpu@3 { compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <3>; + clocks = <&ccu CLK_CPU>; + clock-names = "cpu"; + #cooling-cells = <2>; }; }; @@ -117,6 +130,30 @@ polling-delay-passive = <0>; polling-delay = <0>; thermal-sensors = <&ths 0>; + + trips { + cpu_hot_trip: cpu-hot { + temperature = <80000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_very_hot_trip: cpu-very-hot { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + cpu-hot-limit { + trip = <&cpu_hot_trip>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; }; gpu_thermal: gpu-thermal { @@ -485,7 +522,7 @@ ccu: clock@1c20000 { compatible = "allwinner,sun8i-r40-ccu"; reg = <0x01c20000 0x400>; - clocks = <&osc24M>, <&rtc 0>; + clocks = <&osc24M>, <&rtc CLK_OSC32K>; clock-names = "hosc", "losc"; #clock-cells = <1>; #reset-cells = <1>; @@ -504,7 +541,8 @@ compatible = "allwinner,sun8i-r40-pinctrl"; reg = <0x01c20800 0x400>; interrupts = ; - clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&rtc 0>; + clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, + <&rtc CLK_OSC32K>; clock-names = "apb", "hosc", "losc"; gpio-controller; interrupt-controller; @@ -1231,7 +1269,7 @@ reg-io-width = <1>; interrupts = ; clocks = <&ccu CLK_BUS_HDMI0>, <&ccu CLK_HDMI_SLOW>, - <&ccu CLK_HDMI>, <&rtc 0>; + <&ccu CLK_HDMI>, <&rtc CLK_OSC32K>; clock-names = "iahb", "isfr", "tmds", "cec"; resets = <&ccu RST_BUS_HDMI1>; reset-names = "ctrl"; diff --git a/arch/arm/dts/sun8i-t3-cqa3t-bv3.dts b/arch/arm/dts/sun8i-t3-cqa3t-bv3.dts index 6931aaab23..9f472521f4 100644 --- a/arch/arm/dts/sun8i-t3-cqa3t-bv3.dts +++ b/arch/arm/dts/sun8i-t3-cqa3t-bv3.dts @@ -45,6 +45,7 @@ /dts-v1/; #include "sun8i-r40.dtsi" +#include "sun8i-r40-cpu-opp.dtsi" #include @@ -88,6 +89,10 @@ status = "okay"; }; +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + &de { status = "okay"; }; diff --git a/arch/arm/dts/sun8i-v3s.dtsi b/arch/arm/dts/sun8i-v3s.dtsi index 084323d5c6..db194c606f 100644 --- a/arch/arm/dts/sun8i-v3s.dtsi +++ b/arch/arm/dts/sun8i-v3s.dtsi @@ -42,6 +42,7 @@ */ #include +#include #include #include #include @@ -321,7 +322,7 @@ ccu: clock@1c20000 { compatible = "allwinner,sun8i-v3s-ccu"; reg = <0x01c20000 0x400>; - clocks = <&osc24M>, <&rtc 0>; + clocks = <&osc24M>, <&rtc CLK_OSC32K>; clock-names = "hosc", "losc"; #clock-cells = <1>; #reset-cells = <1>; @@ -342,7 +343,8 @@ reg = <0x01c20800 0x400>; interrupts = , ; - clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&rtc 0>; + clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, + <&rtc CLK_OSC32K>; clock-names = "apb", "hosc", "losc"; gpio-controller; #gpio-cells = <3>; diff --git a/arch/arm/dts/sun8i-v40-bananapi-m2-berry.dts b/arch/arm/dts/sun8i-v40-bananapi-m2-berry.dts index 47954551f5..434871040a 100644 --- a/arch/arm/dts/sun8i-v40-bananapi-m2-berry.dts +++ b/arch/arm/dts/sun8i-v40-bananapi-m2-berry.dts @@ -42,6 +42,7 @@ /dts-v1/; #include "sun8i-r40.dtsi" +#include "sun8i-r40-cpu-opp.dtsi" #include @@ -107,6 +108,10 @@ status = "okay"; }; +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + &de { status = "okay"; }; diff --git a/arch/arm/dts/sun9i-a80.dtsi b/arch/arm/dts/sun9i-a80.dtsi index ce4fa6706d..7d3f3300f4 100644 --- a/arch/arm/dts/sun9i-a80.dtsi +++ b/arch/arm/dts/sun9i-a80.dtsi @@ -1218,7 +1218,6 @@ ; clocks = <&apbs_gates 0>, <&osc24M>, <&osc32k>; clock-names = "apb", "hosc", "losc"; - resets = <&apbs_rst 0>; gpio-controller; interrupt-controller; #interrupt-cells = <3>; diff --git a/arch/arm/dts/sunxi-bananapi-m2-plus.dtsi b/arch/arm/dts/sunxi-bananapi-m2-plus.dtsi index d03f5853ef..e899d14f38 100644 --- a/arch/arm/dts/sunxi-bananapi-m2-plus.dtsi +++ b/arch/arm/dts/sunxi-bananapi-m2-plus.dtsi @@ -77,10 +77,10 @@ }; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; - sw4 { + switch-4 { label = "power"; linux,code = ; gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; @@ -101,7 +101,7 @@ wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ - clocks = <&rtc 1>; + clocks = <&rtc CLK_OSC32K_FANOUT>; clock-names = "ext_clock"; }; }; @@ -221,7 +221,7 @@ bluetooth { compatible = "brcm,bcm43438-bt"; max-speed = <1500000>; - clocks = <&rtc 1>; + clocks = <&rtc CLK_OSC32K_FANOUT>; clock-names = "lpo"; vbat-supply = <®_vcc3v3>; vddio-supply = <®_vcc3v3>; diff --git a/arch/arm/dts/sunxi-h3-h5-emlid-neutis.dtsi b/arch/arm/dts/sunxi-h3-h5-emlid-neutis.dtsi index fc67e30fe2..60804b0e6c 100644 --- a/arch/arm/dts/sunxi-h3-h5-emlid-neutis.dtsi +++ b/arch/arm/dts/sunxi-h3-h5-emlid-neutis.dtsi @@ -22,7 +22,7 @@ compatible = "mmc-pwrseq-simple"; reset-gpios = <&pio 2 7 GPIO_ACTIVE_LOW>; /* PC7 */ post-power-on-delay-ms = <200>; - clocks = <&rtc 1>; + clocks = <&rtc CLK_OSC32K_FANOUT>; clock-names = "ext_clock"; }; }; @@ -124,7 +124,7 @@ bluetooth { compatible = "brcm,bcm43438-bt"; - clocks = <&rtc 1>; + clocks = <&rtc CLK_OSC32K_FANOUT>; clock-names = "lpo"; vbat-supply = <®_vcc3v3>; vddio-supply = <®_vcc3v3>; diff --git a/arch/arm/dts/sunxi-h3-h5.dtsi b/arch/arm/dts/sunxi-h3-h5.dtsi index 6cea57e07f..6439141860 100644 --- a/arch/arm/dts/sunxi-h3-h5.dtsi +++ b/arch/arm/dts/sunxi-h3-h5.dtsi @@ -40,6 +40,7 @@ * OTHER DEALINGS IN THE SOFTWARE. */ +#include #include #include #include @@ -386,7 +387,7 @@ ccu: clock@1c20000 { /* compatible is in per SoC .dtsi file */ reg = <0x01c20000 0x400>; - clocks = <&osc24M>, <&rtc 0>; + clocks = <&osc24M>, <&rtc CLK_OSC32K>; clock-names = "hosc", "losc"; #clock-cells = <1>; #reset-cells = <1>; @@ -397,7 +398,8 @@ reg = <0x01c20800 0x400>; interrupts = , ; - clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&rtc 0>; + clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, + <&rtc CLK_OSC32K>; clock-names = "apb", "hosc", "losc"; gpio-controller; #gpio-cells = <3>; @@ -817,7 +819,7 @@ reg-io-width = <1>; interrupts = ; clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>, - <&ccu CLK_HDMI>, <&rtc 0>; + <&ccu CLK_HDMI>, <&rtc CLK_OSC32K>; clock-names = "iahb", "isfr", "tmds", "cec"; resets = <&ccu RST_BUS_HDMI1>; reset-names = "ctrl"; @@ -876,7 +878,7 @@ r_ccu: clock@1f01400 { compatible = "allwinner,sun8i-h3-r-ccu"; reg = <0x01f01400 0x100>; - clocks = <&osc24M>, <&rtc 0>, <&rtc 2>, + clocks = <&osc24M>, <&rtc CLK_OSC32K>, <&rtc CLK_IOSC>, <&ccu CLK_PLL_PERIPH0>; clock-names = "hosc", "losc", "iosc", "pll-periph"; #clock-cells = <1>; @@ -928,7 +930,8 @@ compatible = "allwinner,sun8i-h3-r-pinctrl"; reg = <0x01f02c00 0x400>; interrupts = ; - clocks = <&r_ccu CLK_APB0_PIO>, <&osc24M>, <&rtc 0>; + clocks = <&r_ccu CLK_APB0_PIO>, <&osc24M>, + <&rtc CLK_OSC32K>; clock-names = "apb", "hosc", "losc"; gpio-controller; #gpio-cells = <3>; diff --git a/arch/arm/dts/sunxi-libretech-all-h3-cc.dtsi b/arch/arm/dts/sunxi-libretech-all-h3-cc.dtsi index 9e14fe5fdc..89731bb34c 100644 --- a/arch/arm/dts/sunxi-libretech-all-h3-cc.dtsi +++ b/arch/arm/dts/sunxi-libretech-all-h3-cc.dtsi @@ -42,10 +42,10 @@ }; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; - power { + key-power { label = "power"; linux,code = ; gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */