From: Stefan Roese <sr@denx.de>
Date: Thu, 7 Apr 2016 08:48:13 +0000 (+0200)
Subject: arm: mvebu: theadorable: Add USB power toggle and tweak USB PHY register
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=ced0d849d8c9614981961ca028207acdcfa2b39c;p=u-boot.git

arm: mvebu: theadorable: Add USB power toggle and tweak USB PHY register

This patch adds an USB power toggle for theadorable. Additionally, the
USB PHY RX Channel Control 0 Register is changed to fix some issues
noticed while accessing some specific USB sticks.

Signed-off-by: Stefan Roese <sr@denx.de>
---

diff --git a/board/theadorable/theadorable.c b/board/theadorable/theadorable.c
index ee88a98a24..0756f186a6 100644
--- a/board/theadorable/theadorable.c
+++ b/board/theadorable/theadorable.c
@@ -5,6 +5,7 @@
  */
 
 #include <common.h>
+#include <asm/gpio.h>
 #include <asm/io.h>
 #include <asm/arch/cpu.h>
 #include <asm/arch/soc.h>
@@ -19,6 +20,10 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
+#define MV_USB_PHY_BASE			(MVEBU_AXP_USB_BASE + 0x800)
+#define PHY_CHANNEL_RX_CTRL0_REG(port, chan) \
+	(MV_USB_PHY_BASE + ((port) << 12) + ((chan) << 6) + 0x8)
+
 #define THEADORABLE_GPP_OUT_ENA_LOW	0x00336780
 #define THEADORABLE_GPP_OUT_ENA_MID	0x00003cf0
 #define THEADORABLE_GPP_OUT_ENA_HIGH	(~(0x0))
@@ -27,6 +32,9 @@ DECLARE_GLOBAL_DATA_PTR;
 #define THEADORABLE_GPP_OUT_VAL_MID	0x0007000c
 #define THEADORABLE_GPP_OUT_VAL_HIGH	0x00000000
 
+#define GPIO_USB0_PWR_ON		18
+#define GPIO_USB1_PWR_ON		19
+
 /* DDR3 static configuration */
 static MV_DRAM_MC_INIT ddr3_theadorable[MV_MAX_DDR3_STATIC_SIZE] = {
 	{0x00001400, 0x7301ca28},	/* DDR SDRAM Configuration Register */
@@ -135,6 +143,8 @@ int board_early_init_f(void)
 
 int board_init(void)
 {
+	int ret;
+
 	/* adress of boot parameters */
 	gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100;
 
@@ -147,6 +157,28 @@ int board_init(void)
 	mbus_dt_setup_win(&mbus_state, SPI_BUS1_DEV2_BASE, SPI_BUS0_DEV1_SIZE,
 			  CPU_TARGET_DEVICEBUS_BOOTROM_SPI, CPU_ATTR_SPI1_CS2);
 
+	/*
+	 * Set RX Channel Control 0 Register:
+	 * Tests have shown, that setting the LPF_COEF from 0 (1/8)
+	 * to 3 (1/1) results in a more stable USB connection.
+	 */
+	setbits_le32(PHY_CHANNEL_RX_CTRL0_REG(0, 1), 0xc);
+	setbits_le32(PHY_CHANNEL_RX_CTRL0_REG(0, 2), 0xc);
+	setbits_le32(PHY_CHANNEL_RX_CTRL0_REG(0, 3), 0xc);
+
+	/* Toggle USB power */
+	ret = gpio_request(GPIO_USB0_PWR_ON, "USB0_PWR_ON");
+	if (ret < 0)
+		return ret;
+	gpio_direction_output(GPIO_USB0_PWR_ON, 0);
+	ret = gpio_request(GPIO_USB1_PWR_ON, "USB1_PWR_ON");
+	if (ret < 0)
+		return ret;
+	gpio_direction_output(GPIO_USB1_PWR_ON, 0);
+	mdelay(1);
+	gpio_set_value(GPIO_USB0_PWR_ON, 1);
+	gpio_set_value(GPIO_USB1_PWR_ON, 1);
+
 	return 0;
 }