From: Marek Vasut Date: Sun, 15 Apr 2018 11:15:33 +0000 (+0200) Subject: tools: socfpga: Add SFP image V1 support X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=cece78fafed838462dd9b2404eac98472fe75b2e;p=u-boot.git tools: socfpga: Add SFP image V1 support Add support for the SoCFPGA header v1 , which is used on Arria 10. Thus far the mkimage-socfpga image only supported header format v0 used on Cyclone V and Arria V, but is not supported on Arria 10. The layout of the v0 and v1 header is similar, yet there are a few differences, see the patch body for details. Signed-off-by: Marek Vasut Cc: Dinh Nguyen Cc: Chin Liang See --- diff --git a/tools/socfpgaimage.c b/tools/socfpgaimage.c index 673c53258d..390c9bb402 100644 --- a/tools/socfpgaimage.c +++ b/tools/socfpgaimage.c @@ -2,30 +2,52 @@ /* * Copyright (C) 2014 Charles Manning * - * Reference doc http://www.altera.com.cn/literature/hb/cyclone-v/cv_5400A.pdf - * Note this doc is not entirely accurate. Of particular interest to us is the - * "header" length field being in U32s and not bytes. + * Reference documents: + * Cyclone V SoC: https://www.altera.com/content/dam/altera-www/global/en_US/pdfs/literature/hb/cyclone-v/cv_5400a.pdf + * Arria V SoC: https://www.altera.com/content/dam/altera-www/global/en_US/pdfs/literature/hb/arria-v/av_5400a.pdf + * Arria 10 SoC: https://www.altera.com/content/dam/altera-www/global/en_US/pdfs/literature/hb/arria-10/a10_5400a.pdf * - * "Header" is a structure of the following format. - * this is positioned at 0x40. + * Bootable SoCFPGA image requires a structure of the following format + * positioned at offset 0x40 of the bootable image. Endian is LSB. * - * Endian is LSB. + * There are two versions of the SoCFPGA header format, v0 and v1. + * The version 0 is used by Cyclone V SoC and Arria V SoC, while + * the version 1 is used by the Arria 10 SoC. * + * Version 0: * Offset Length Usage * ----------------------- - * 0x40 4 Validation word 0x31305341 - * 0x44 1 Version (whatever, zero is fine) - * 0x45 1 Flags (unused, zero is fine) - * 0x46 2 Length (in units of u32, including the end checksum). - * 0x48 2 Zero + * 0x40 4 Validation word (0x31305341) + * 0x44 1 Version (0x0) + * 0x45 1 Flags (unused, zero is fine) + * 0x46 2 Length (in units of u32, including the end checksum). + * 0x48 2 Zero (0x0) * 0x4A 2 Checksum over the header. NB Not CRC32 * + * Version 1: + * Offset Length Usage + * ----------------------- + * 0x40 4 Validation word (0x31305341) + * 0x44 1 Version (0x1) + * 0x45 1 Flags (unused, zero is fine) + * 0x46 2 Header length (in units of u8). + * 0x48 4 Length (in units of u8). + * 0x4C 4 Image entry offset from standard of header + * 0x50 2 Zero (0x0) + * 0x52 2 Checksum over the header. NB Not CRC32 + * * At the end of the code we have a 32-bit CRC checksum over whole binary * excluding the CRC. * * Note that the CRC used here is **not** the zlib/Adler crc32. It is the * CRC-32 used in bzip2, ethernet and elsewhere. * + * The Image entry offset in version 1 image is relative the the start of + * the header, 0x40, and must not be a negative number. Therefore, it is + * only possible to make the SoCFPGA jump forward. The U-Boot bootloader + * places a trampoline instruction at offset 0x5c, 0x14 bytes from the + * start of the SoCFPGA header, which jumps to the reset vector. + * * The image is padded out to 64k, because that is what is * typically used to write the image to the boot medium. */ @@ -38,32 +60,57 @@ #define HEADER_OFFSET 0x40 #define VALIDATION_WORD 0x31305341 -#define PADDED_SIZE 0x10000 -/* To allow for adding CRC, the max input size is a bit smaller. */ -#define MAX_INPUT_SIZE (PADDED_SIZE - sizeof(uint32_t)) +static uint8_t buffer_v0[0x10000]; +static uint8_t buffer_v1[0x40000]; -static uint8_t buffer[PADDED_SIZE]; +struct socfpga_header_v0 { + uint32_t validation; + uint8_t version; + uint8_t flags; + uint16_t length_u32; + uint16_t zero; + uint16_t checksum; +}; -struct socfpga_header { - uint32_t validation; - uint8_t version; - uint8_t flags; - uint16_t length_u32; - uint16_t zero; - uint16_t checksum; +struct socfpga_header_v1 { + uint32_t validation; + uint8_t version; + uint8_t flags; + uint16_t header_u8; + uint32_t length_u8; + uint32_t entry_offset; + uint16_t zero; + uint16_t checksum; }; +static unsigned int sfp_hdr_size(uint8_t ver) +{ + if (ver == 0) + return sizeof(struct socfpga_header_v0); + if (ver == 1) + return sizeof(struct socfpga_header_v1); + return 0; +} + +static unsigned int sfp_pad_size(uint8_t ver) +{ + if (ver == 0) + return sizeof(buffer_v0); + if (ver == 1) + return sizeof(buffer_v1); + return 0; +} + /* * The header checksum is just a very simple checksum over * the header area. * There is still a crc32 over the whole lot. */ -static uint16_t hdr_checksum(struct socfpga_header *header) +static uint16_t sfp_hdr_checksum(uint8_t *buf, unsigned char ver) { - int len = sizeof(*header) - sizeof(header->checksum); - uint8_t *buf = (uint8_t *)header; uint16_t ret = 0; + int len = sfp_hdr_size(ver) - sizeof(ret); while (--len) ret += *buf++; @@ -71,52 +118,93 @@ static uint16_t hdr_checksum(struct socfpga_header *header) return ret; } - -static void build_header(uint8_t *buf, uint8_t version, uint8_t flags, - uint16_t length_bytes) +static void sfp_build_header(uint8_t *buf, uint8_t ver, uint8_t flags, + uint32_t length_bytes) { - struct socfpga_header header; - - header.validation = cpu_to_le32(VALIDATION_WORD); - header.version = version; - header.flags = flags; - header.length_u32 = cpu_to_le16(length_bytes/4); - header.zero = 0; - header.checksum = cpu_to_le16(hdr_checksum(&header)); - - memcpy(buf, &header, sizeof(header)); + struct socfpga_header_v0 header_v0 = { + .validation = cpu_to_le32(VALIDATION_WORD), + .version = 0, + .flags = flags, + .length_u32 = cpu_to_le16(length_bytes / 4), + .zero = 0, + }; + + struct socfpga_header_v1 header_v1 = { + .validation = cpu_to_le32(VALIDATION_WORD), + .version = 1, + .flags = flags, + .header_u8 = cpu_to_le16(sizeof(header_v1)), + .length_u8 = cpu_to_le32(length_bytes), + .entry_offset = cpu_to_le32(0x14), /* Trampoline offset */ + .zero = 0, + }; + + uint16_t csum; + + if (ver == 0) { + csum = sfp_hdr_checksum((uint8_t *)&header_v0, 0); + header_v0.checksum = cpu_to_le16(csum); + memcpy(buf, &header_v0, sizeof(header_v0)); + } else { + csum = sfp_hdr_checksum((uint8_t *)&header_v1, 1); + header_v1.checksum = cpu_to_le16(csum); + memcpy(buf, &header_v1, sizeof(header_v1)); + } } /* * Perform a rudimentary verification of header and return * size of image. */ -static int verify_header(const uint8_t *buf) +static int sfp_verify_header(const uint8_t *buf, uint8_t *ver) { - struct socfpga_header header; + struct socfpga_header_v0 header_v0; + struct socfpga_header_v1 header_v1; + uint16_t hdr_csum, sfp_csum; + uint32_t img_len; - memcpy(&header, buf, sizeof(header)); + /* + * Header v0 is always smaller than Header v1 and the validation + * word and version field is at the same place, so use Header v0 + * to check for version during verifiction and upgrade to Header + * v1 if needed. + */ + memcpy(&header_v0, buf, sizeof(header_v0)); - if (le32_to_cpu(header.validation) != VALIDATION_WORD) - return -1; - if (le16_to_cpu(header.checksum) != hdr_checksum(&header)) + if (le32_to_cpu(header_v0.validation) != VALIDATION_WORD) return -1; - return le16_to_cpu(header.length_u32) * 4; + if (header_v0.version == 0) { + hdr_csum = le16_to_cpu(header_v0.checksum); + sfp_csum = sfp_hdr_checksum((uint8_t *)&header_v0, 0); + img_len = le16_to_cpu(header_v0.length_u32) * 4; + } else if (header_v0.version == 1) { + memcpy(&header_v1, buf, sizeof(header_v1)); + hdr_csum = le16_to_cpu(header_v1.checksum); + sfp_csum = sfp_hdr_checksum((uint8_t *)&header_v1, 1); + img_len = le32_to_cpu(header_v1.length_u8); + } else { /* Invalid version */ + return -EINVAL; + } + + /* Verify checksum */ + if (hdr_csum != sfp_csum) + return -EINVAL; + + return img_len; } /* Sign the buffer and return the signed buffer size */ -static int sign_buffer(uint8_t *buf, - uint8_t version, uint8_t flags, - int len, int pad_64k) +static int sfp_sign_buffer(uint8_t *buf, uint8_t ver, uint8_t flags, + int len, int pad_64k) { uint32_t calc_crc; /* Align the length up */ - len = (len + 3) & (~3); + len = (len + 3) & ~3; /* Build header, adding 4 bytes to length to hold the CRC32. */ - build_header(buf + HEADER_OFFSET, version, flags, len + 4); + sfp_build_header(buf + HEADER_OFFSET, ver, flags, len + 4); /* Calculate and apply the CRC */ calc_crc = ~pbl_crc32(0, (char *)buf, len); @@ -126,23 +214,24 @@ static int sign_buffer(uint8_t *buf, if (!pad_64k) return len + 4; - return PADDED_SIZE; + return sfp_pad_size(ver); } /* Verify that the buffer looks sane */ -static int verify_buffer(const uint8_t *buf) +static int sfp_verify_buffer(const uint8_t *buf) { int len; /* Including 32bit CRC */ uint32_t calc_crc; uint32_t buf_crc; + uint8_t ver = 0; - len = verify_header(buf + HEADER_OFFSET); + len = sfp_verify_header(buf + HEADER_OFFSET, &ver); if (len < 0) { debug("Invalid header\n"); return -1; } - if (len < HEADER_OFFSET || len > PADDED_SIZE) { + if (len < HEADER_OFFSET || len > sfp_pad_size(ver)) { debug("Invalid header length (%i)\n", len); return -1; } @@ -168,17 +257,17 @@ static int verify_buffer(const uint8_t *buf) /* mkimage glue functions */ static int socfpgaimage_verify_header(unsigned char *ptr, int image_size, - struct image_tool_params *params) + struct image_tool_params *params) { - if (image_size != PADDED_SIZE) + if (image_size < 0x80) return -1; - return verify_buffer(ptr); + return sfp_verify_buffer(ptr); } static void socfpgaimage_print_header(const void *ptr) { - if (verify_buffer(ptr) == 0) + if (sfp_verify_buffer(ptr) == 0) printf("Looks like a sane SOCFPGA preloader\n"); else printf("Not a sane SOCFPGA preloader\n"); @@ -192,18 +281,25 @@ static int socfpgaimage_check_params(struct image_tool_params *params) (params->lflag && (params->dflag || params->fflag)); } -static int socfpgaimage_check_image_types(uint8_t type) +static int socfpgaimage_check_image_types_v0(uint8_t type) { if (type == IH_TYPE_SOCFPGAIMAGE) return EXIT_SUCCESS; return EXIT_FAILURE; } +static int socfpgaimage_check_image_types_v1(uint8_t type) +{ + if (type == IH_TYPE_SOCFPGAIMAGE_V1) + return EXIT_SUCCESS; + return EXIT_FAILURE; +} + /* * To work in with the mkimage framework, we do some ugly stuff... * * First, socfpgaimage_vrec_header() is called. - * We prepend a fake header big enough to make the file PADDED_SIZE. + * We prepend a fake header big enough to make the file sfp_pad_size(). * This gives us enough space to do what we want later. * * Next, socfpgaimage_set_header() is called. @@ -212,51 +308,94 @@ static int socfpgaimage_check_image_types(uint8_t type) */ static int data_size; -#define FAKE_HEADER_SIZE (PADDED_SIZE - data_size) -static int socfpgaimage_vrec_header(struct image_tool_params *params, - struct image_type_params *tparams) +static int sfp_fake_header_size(unsigned int size, uint8_t ver) +{ + return sfp_pad_size(ver) - size; +} + +static int sfp_vrec_header(struct image_tool_params *params, + struct image_type_params *tparams, uint8_t ver) { struct stat sbuf; if (params->datafile && stat(params->datafile, &sbuf) == 0 && - sbuf.st_size <= MAX_INPUT_SIZE) { + sbuf.st_size <= (sfp_pad_size(ver) - sizeof(uint32_t))) { data_size = sbuf.st_size; - tparams->header_size = FAKE_HEADER_SIZE; + tparams->header_size = sfp_fake_header_size(data_size, ver); } return 0; + } -static void socfpgaimage_set_header(void *ptr, struct stat *sbuf, int ifd, - struct image_tool_params *params) +static int socfpgaimage_vrec_header_v0(struct image_tool_params *params, + struct image_type_params *tparams) +{ + return sfp_vrec_header(params, tparams, 0); +} + +static int socfpgaimage_vrec_header_v1(struct image_tool_params *params, + struct image_type_params *tparams) +{ + return sfp_vrec_header(params, tparams, 1); +} + +static void sfp_set_header(void *ptr, unsigned char ver) { uint8_t *buf = (uint8_t *)ptr; /* * This function is called after vrec_header() has been called. - * At this stage we have the FAKE_HEADER_SIZE dummy bytes followed by - * data_size image bytes. Total = PADDED_SIZE. + * At this stage we have the sfp_fake_header_size() dummy bytes + * followed by data_size image bytes. Total = sfp_pad_size(). * We need to fix the buffer by moving the image bytes back to * the beginning of the buffer, then actually do the signing stuff... */ - memmove(buf, buf + FAKE_HEADER_SIZE, data_size); - memset(buf + data_size, 0, FAKE_HEADER_SIZE); + memmove(buf, buf + sfp_fake_header_size(data_size, ver), data_size); + memset(buf + data_size, 0, sfp_fake_header_size(data_size, ver)); + + sfp_sign_buffer(buf, ver, 0, data_size, 0); +} - sign_buffer(buf, 0, 0, data_size, 0); +static void socfpgaimage_set_header_v0(void *ptr, struct stat *sbuf, int ifd, + struct image_tool_params *params) +{ + sfp_set_header(ptr, 0); +} + +static void socfpgaimage_set_header_v1(void *ptr, struct stat *sbuf, int ifd, + struct image_tool_params *params) +{ + sfp_set_header(ptr, 1); } U_BOOT_IMAGE_TYPE( socfpgaimage, - "Altera SOCFPGA preloader support", + "Altera SoCFPGA Cyclone V / Arria V image support", + 0, /* This will be modified by vrec_header() */ + (void *)buffer_v0, + socfpgaimage_check_params, + socfpgaimage_verify_header, + socfpgaimage_print_header, + socfpgaimage_set_header_v0, + NULL, + socfpgaimage_check_image_types_v0, + NULL, + socfpgaimage_vrec_header_v0 +); + +U_BOOT_IMAGE_TYPE( + socfpgaimage_v1, + "Altera SoCFPGA Arria10 image support", 0, /* This will be modified by vrec_header() */ - (void *)buffer, + (void *)buffer_v1, socfpgaimage_check_params, socfpgaimage_verify_header, socfpgaimage_print_header, - socfpgaimage_set_header, + socfpgaimage_set_header_v1, NULL, - socfpgaimage_check_image_types, + socfpgaimage_check_image_types_v1, NULL, - socfpgaimage_vrec_header + socfpgaimage_vrec_header_v1 );