From: Wolfgang Denk <wd@fifi.denx.de>
Date: Fri, 16 Jun 2006 14:14:28 +0000 (+0200)
Subject: Fix TRAB channel switching delay for trab_fkt.bin standalone applikation
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=cebd1fcec0f7a484ca7e8ecce76c6d9c211368ec;p=u-boot.git

Fix TRAB channel switching delay for trab_fkt.bin standalone applikation
Patch by Martin Krause, 08 Nov 2005

In tsc2000_read_channel() the delay after setting the multiplexer
to a temperature channel is increased from 1,5 ms to 10 ms. This
is to allow the multiplexer inputs to stabilize after huge steps
of the input signal level.
---

diff --git a/CHANGELOG b/CHANGELOG
index 63b23c1325..0e809f8f5b 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,13 @@
 Changes since U-Boot 1.1.4:
 ======================================================================
 
+* Fix TRAB channel switching delay for trab_fkt.bin standalone applikation
+  In tsc2000_read_channel() the delay after setting the multiplexer 
+  to a temperature channel is increased from 1,5 ms to 10 ms. This
+  is to allow the multiplexer inputs to stabilize after huge steps
+  of the input signal level.
+  Patch by Martin Krause, 08 Nov 2005
+
 * Adjust TQM5200 make targets
   Make the automatic CS configuration the default.
   The dedicated configurations CONFIG_TQM5200_AA, CONFIG_TQM5200_AB
diff --git a/board/trab/tsc2000.c b/board/trab/tsc2000.c
index ca6868212e..382a85b359 100644
--- a/board/trab/tsc2000.c
+++ b/board/trab/tsc2000.c
@@ -223,7 +223,7 @@ u16 tsc2000_read_channel (unsigned int channel)
 	u16 res;
 
 	tsc2000_set_mux(channel);
-	udelay(3 * TSC2000_DELAY_BASE);
+	udelay(20 * TSC2000_DELAY_BASE);
 
 	tsc2000_write(TSC2000_REG_ADC, 0x2036);
 	adc_wait_conversion_done ();