From: Tom Rini Date: Sun, 21 Feb 2021 01:06:23 +0000 (-0500) Subject: ppc: Remove gdsys strider boards X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=ce4ca2b7399f11b45ca3f8e1e856e5fa23c6f290;p=u-boot.git ppc: Remove gdsys strider boards These boards have not been converted to CONFIG_DM_MMC, along with other DM conversions, by the deadline. Remove them. Cc: Dirk Eibach Signed-off-by: Tom Rini --- diff --git a/arch/powerpc/cpu/mpc83xx/Kconfig b/arch/powerpc/cpu/mpc83xx/Kconfig index 4b4fae4a4c..d25fbf8452 100644 --- a/arch/powerpc/cpu/mpc83xx/Kconfig +++ b/arch/powerpc/cpu/mpc83xx/Kconfig @@ -137,12 +137,6 @@ config TARGET_HRCON select ARCH_MPC8308 select SYS_FSL_ERRATUM_ESDHC111 -config TARGET_STRIDER - bool "Support strider" - select ARCH_MPC8308 - select SYS_FSL_ERRATUM_ESDHC111 - imply CMD_PCA953X - config TARGET_GAZERBEAM bool "Support gazerbeam" select ARCH_MPC8308 diff --git a/board/gdsys/common/Makefile b/board/gdsys/common/Makefile index 7dfe104561..fa4c65c634 100644 --- a/board/gdsys/common/Makefile +++ b/board/gdsys/common/Makefile @@ -7,10 +7,6 @@ obj-$(CONFIG_SYS_FPGA_COMMON) += fpga.o obj-$(CONFIG_CMD_IOLOOP) += cmd_ioloop.o obj-$(CONFIG_CONTROLCENTERD) += dp501.o obj-$(CONFIG_TARGET_HRCON) += osd.o mclink.o dp501.o phy.o ioep-fpga.o fanctrl.o -obj-$(CONFIG_TARGET_STRIDER) += mclink.o dp501.o phy.o ioep-fpga.o adv7611.o ch7301.o -obj-$(CONFIG_TARGET_STRIDER) += fanctrl.o -obj-$(CONFIG_STRIDER_CON) += osd.o -obj-$(CONFIG_STRIDER_CON_DP) += osd.o obj-$(CONFIG_TARGET_GAZERBEAM) += osd.o ihs_mdio.o ioep-fpga.o ifdef CONFIG_OSD diff --git a/board/gdsys/common/adv7611.c b/board/gdsys/common/adv7611.c deleted file mode 100644 index 06cdc05825..0000000000 --- a/board/gdsys/common/adv7611.c +++ /dev/null @@ -1,180 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * (C) Copyright 2014 - * Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc - */ - -#ifdef CONFIG_GDSYS_LEGACY_DRIVERS - -#include -#include - -#define ADV7611_I2C_ADDR 0x4c -#define ADV7611_RDINFO 0x2051 - -/* - * ADV7611 I2C Addresses in u-boot notation - */ -enum { - CP_I2C_ADDR = 0x22, - DPLL_I2C_ADDR = 0x26, - KSV_I2C_ADDR = 0x32, - HDMI_I2C_ADDR = 0x34, - EDID_I2C_ADDR = 0x36, - INFOFRAME_I2C_ADDR = 0x3e, - CEC_I2C_ADDR = 0x40, - IO_I2C_ADDR = ADV7611_I2C_ADDR, -}; - -/* - * Global Control Registers - */ -enum { - IO_RD_INFO_MSB = 0xea, - IO_RD_INFO_LSB = 0xeb, - IO_CEC_ADDR = 0xf4, - IO_INFOFRAME_ADDR = 0xf5, - IO_DPLL_ADDR = 0xf8, - IO_KSV_ADDR = 0xf9, - IO_EDID_ADDR = 0xfa, - IO_HDMI_ADDR = 0xfb, - IO_CP_ADDR = 0xfd, -}; - -int adv7611_i2c[] = CONFIG_SYS_ADV7611_I2C; - -int adv7611_probe(unsigned int screen) -{ - int old_bus = i2c_get_bus_num(); - unsigned int rd_info; - int res = 0; - - i2c_set_bus_num(adv7611_i2c[screen]); - - rd_info = (i2c_reg_read(IO_I2C_ADDR, IO_RD_INFO_MSB) << 8) - | i2c_reg_read(IO_I2C_ADDR, IO_RD_INFO_LSB); - - if (rd_info != ADV7611_RDINFO) { - res = -1; - goto out; - } - - /* - * set I2C addresses to default values - */ - i2c_reg_write(IO_I2C_ADDR, IO_CEC_ADDR, CEC_I2C_ADDR << 1); - i2c_reg_write(IO_I2C_ADDR, IO_INFOFRAME_ADDR, INFOFRAME_I2C_ADDR << 1); - i2c_reg_write(IO_I2C_ADDR, IO_DPLL_ADDR, DPLL_I2C_ADDR << 1); - i2c_reg_write(IO_I2C_ADDR, IO_KSV_ADDR, KSV_I2C_ADDR << 1); - i2c_reg_write(IO_I2C_ADDR, IO_EDID_ADDR, EDID_I2C_ADDR << 1); - i2c_reg_write(IO_I2C_ADDR, IO_HDMI_ADDR, HDMI_I2C_ADDR << 1); - i2c_reg_write(IO_I2C_ADDR, IO_CP_ADDR, CP_I2C_ADDR << 1); - - /* - * do magic initialization sequence from - * "ADV7611 Register Settings Recommendations Revision 1.5" - * with most registers undocumented - */ - i2c_reg_write(CP_I2C_ADDR, 0x6c, 0x00); - i2c_reg_write(HDMI_I2C_ADDR, 0x9b, 0x03); - i2c_reg_write(HDMI_I2C_ADDR, 0x6f, 0x08); - i2c_reg_write(HDMI_I2C_ADDR, 0x85, 0x1f); - i2c_reg_write(HDMI_I2C_ADDR, 0x87, 0x70); - i2c_reg_write(HDMI_I2C_ADDR, 0x57, 0xda); - i2c_reg_write(HDMI_I2C_ADDR, 0x58, 0x01); - i2c_reg_write(HDMI_I2C_ADDR, 0x03, 0x98); - i2c_reg_write(HDMI_I2C_ADDR, 0x4c, 0x44); - - /* - * IO_REG_02, default 0xf0 - * - * INP_COLOR_SPACE (IO, Address 0x02[7:4]) - * default: 0b1111 auto - * set to : 0b0001 force RGB (range 0 to 255) input - * - * RGB_OUT (IO, Address 0x02[1]) - * default: 0 YPbPr color space output - * set to : 1 RGB color space output - */ - i2c_reg_write(IO_I2C_ADDR, 0x02, 0x12); - - /* - * IO_REG_03, default 0x00 - * - * OP_FORMAT_SEL (IO, Address 0x03[7:0]) - * default: 0x00 8-bit SDR ITU-656 mode - * set to : 0x40 24-bit 4:4:4 SDR mode - */ - i2c_reg_write(IO_I2C_ADDR, 0x03, 0x40); - - /* - * IO_REG_05, default 0x2c - * - * AVCODE_INSERT_EN (IO, Address 0x05[2]) - * default: 1 insert AV codes into data stream - * set to : 0 do not insert AV codes into data stream - */ - i2c_reg_write(IO_I2C_ADDR, 0x05, 0x28); - - /* - * IO_REG_0C, default 0x62 - * - * POWER_DOWN (IO, Address 0x0C[5]) - * default: 1 chip is powered down - * set to : 0 chip is operational - */ - i2c_reg_write(IO_I2C_ADDR, 0x0c, 0x42); - - /* - * IO_REG_15, default 0xbe - * - * TRI_SYNCS (IO, Address 0x15[3) - * TRI_LLC (IO, Address 0x15[2]) - * TRI_PIX (IO, Address 0x15[1]) - * default: 1 video output pins are tristate - * set to : 0 video output pins are active - */ - i2c_reg_write(IO_I2C_ADDR, 0x15, 0xb0); - - /* - * HDMI_REGISTER_02H, default 0xff - * - * CLOCK_TERMA_DISABLE (HDMI, Address 0x83[0]) - * default: 1 disable termination - * set to : 0 enable termination - * Future options are: - * - use the chips automatic termination control - * - set this manually on cable detect - * but at the moment this seems a safe default. - */ - i2c_reg_write(HDMI_I2C_ADDR, 0x83, 0xfe); - - /* - * HDMI_CP_CNTRL_1, default 0x01 - * - * HDMI_FRUN_EN (CP, Address 0xBA[0]) - * default: 1 Enable the free run feature in HDMI mode - * set to : 0 Disable the free run feature in HDMI mode - */ - i2c_reg_write(CP_I2C_ADDR, 0xba, 0x00); - - /* - * INT1_CONFIGURATION, default 0x20 - * - * INTRQ_DUR_SEL[1:0] (IO, Address 0x40[7:6]) - * default: 00 Interrupt signal is active for 4 Xtal periods - * set to : 11 Active until cleared - * - * INTRQ_OP_SEL[1:0] (IO, Address 0x40[1:0]) - * default: 00 Open drain - * set to : 10 Drives high when active - */ - i2c_reg_write(IO_I2C_ADDR, 0x40, 0xc2); - -out: - i2c_set_bus_num(old_bus); - - return res; -} - -#endif /* CONFIG_GDSYS_LEGACY_DRIVERS */ diff --git a/board/gdsys/common/adv7611.h b/board/gdsys/common/adv7611.h deleted file mode 100644 index 7b4e27c6bc..0000000000 --- a/board/gdsys/common/adv7611.h +++ /dev/null @@ -1,12 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * (C) Copyright 2014 - * Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc - */ - -#ifndef _ADV7611_H_ -#define _ADV7611_H_ - -int adv7611_probe(unsigned int screen); - -#endif diff --git a/board/gdsys/common/ch7301.c b/board/gdsys/common/ch7301.c deleted file mode 100644 index 5e42467651..0000000000 --- a/board/gdsys/common/ch7301.c +++ /dev/null @@ -1,67 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * (C) Copyright 2014 - * Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc - */ - -/* Chrontel CH7301C DVI Transmitter */ - -#ifdef CONFIG_GDSYS_LEGACY_DRIVERS - -#include -#include -#include -#include - -#define CH7301_I2C_ADDR 0x75 - -enum { - CH7301_CM = 0x1c, /* Clock Mode Register */ - CH7301_IC = 0x1d, /* Input Clock Register */ - CH7301_GPIO = 0x1e, /* GPIO Control Register */ - CH7301_IDF = 0x1f, /* Input Data Format Register */ - CH7301_CD = 0x20, /* Connection Detect Register */ - CH7301_DC = 0x21, /* DAC Control Register */ - CH7301_HPD = 0x23, /* Hot Plug Detection Register */ - CH7301_TCTL = 0x31, /* DVI Control Input Register */ - CH7301_TPCP = 0x33, /* DVI PLL Charge Pump Ctrl Register */ - CH7301_TPD = 0x34, /* DVI PLL Divide Register */ - CH7301_TPVT = 0x35, /* DVI PLL Supply Control Register */ - CH7301_TPF = 0x36, /* DVI PLL Filter Register */ - CH7301_TCT = 0x37, /* DVI Clock Test Register */ - CH7301_TSTP = 0x48, /* Test Pattern Register */ - CH7301_PM = 0x49, /* Power Management register */ - CH7301_VID = 0x4a, /* Version ID Register */ - CH7301_DID = 0x4b, /* Device ID Register */ - CH7301_DSP = 0x56, /* DVI Sync polarity Register */ -}; - -int ch7301_i2c[] = CONFIG_SYS_CH7301_I2C; - -int ch7301_probe(unsigned screen, bool power) -{ - u8 value; - - i2c_set_bus_num(ch7301_i2c[screen]); - if (i2c_probe(CH7301_I2C_ADDR)) - return -1; - - value = i2c_reg_read(CH7301_I2C_ADDR, CH7301_DID); - if (value != 0x17) - return -1; - - if (power) { - i2c_reg_write(CH7301_I2C_ADDR, CH7301_TPCP, 0x08); - i2c_reg_write(CH7301_I2C_ADDR, CH7301_TPD, 0x16); - i2c_reg_write(CH7301_I2C_ADDR, CH7301_TPF, 0x60); - i2c_reg_write(CH7301_I2C_ADDR, CH7301_DC, 0x09); - i2c_reg_write(CH7301_I2C_ADDR, CH7301_PM, 0xc0); - } else { - i2c_reg_write(CH7301_I2C_ADDR, CH7301_DC, 0x00); - i2c_reg_write(CH7301_I2C_ADDR, CH7301_PM, 0x01); - } - - return 0; -} - -#endif /* CONFIG_GDSYS_LEGACY_DRIVERS */ diff --git a/board/gdsys/common/ch7301.h b/board/gdsys/common/ch7301.h deleted file mode 100644 index e0e8a9e9d4..0000000000 --- a/board/gdsys/common/ch7301.h +++ /dev/null @@ -1,12 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * (C) Copyright 2014 - * Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc - */ - -#ifndef _CH7301_H_ -#define _CH7301_H_ - -int ch7301_probe(unsigned screen, bool power); - -#endif diff --git a/board/gdsys/mpc8308/Kconfig b/board/gdsys/mpc8308/Kconfig index 30811889fb..1c33f0c982 100644 --- a/board/gdsys/mpc8308/Kconfig +++ b/board/gdsys/mpc8308/Kconfig @@ -52,25 +52,6 @@ config GDSYS_LEGACY_DRIVERS endif -if TARGET_STRIDER - -config SYS_BOARD - default "mpc8308" - -config SYS_VENDOR - default "gdsys" - -config SYS_CONFIG_NAME - default "strider" - -config GDSYS_LEGACY_OSD_CMDS - default y - -config GDSYS_LEGACY_DRIVERS - default y - -endif - if TARGET_GAZERBEAM config SYS_BOARD @@ -92,7 +73,7 @@ config GDSYS_LEGACY_OSD_CMDS default y endif -if TARGET_HRCON || TARGET_STRIDER || TARGET_GAZERBEAM +if TARGET_HRCON || TARGET_GAZERBEAM choice prompt "FPGA flavor selection" diff --git a/board/gdsys/mpc8308/MAINTAINERS b/board/gdsys/mpc8308/MAINTAINERS index ed1b6fa106..cc0fbebccd 100644 --- a/board/gdsys/mpc8308/MAINTAINERS +++ b/board/gdsys/mpc8308/MAINTAINERS @@ -5,10 +5,4 @@ F: board/gdsys/mpc8308/ F: include/configs/hrcon.h F: configs/hrcon_defconfig F: configs/hrcon_dh_defconfig -F: include/configs/strider.h -F: configs/strider_defconfig -F: configs/strider_cpu_defconfig -F: configs/strider_cpu_dp_defconfig -F: configs/strider_con_defconfig -F: configs/strider_con_dp_defconfig F: configs/gazerbeam_defconfig diff --git a/board/gdsys/mpc8308/Makefile b/board/gdsys/mpc8308/Makefile index 9af5fe04d1..578b36653d 100644 --- a/board/gdsys/mpc8308/Makefile +++ b/board/gdsys/mpc8308/Makefile @@ -5,5 +5,4 @@ obj-y := mpc8308.o sdram.o obj-$(CONFIG_TARGET_HRCON) += hrcon.o -obj-$(CONFIG_TARGET_STRIDER) += strider.o obj-$(CONFIG_TARGET_GAZERBEAM) += gazerbeam.o diff --git a/board/gdsys/mpc8308/strider.c b/board/gdsys/mpc8308/strider.c deleted file mode 100644 index 91fec74fb0..0000000000 --- a/board/gdsys/mpc8308/strider.c +++ /dev/null @@ -1,559 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * (C) Copyright 2014 - * Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "mpc8308.h" - -#include - -#include "../common/adv7611.h" -#include "../common/ch7301.h" -#include "../common/dp501.h" -#include "../common/ioep-fpga.h" -#include "../common/mclink.h" -#include "../common/osd.h" -#include "../common/phy.h" -#include "../common/fanctrl.h" - -#include -#include - -#include - -#define MAX_MUX_CHANNELS 2 - -enum { - MCFPGA_DONE = 1 << 0, - MCFPGA_INIT_N = 1 << 1, - MCFPGA_PROGRAM_N = 1 << 2, - MCFPGA_UPDATE_ENABLE_N = 1 << 3, - MCFPGA_RESET_N = 1 << 4, -}; - -enum { - GPIO_MDC = 1 << 14, - GPIO_MDIO = 1 << 15, -}; - -uint mclink_fpgacount; -struct ihs_fpga *fpga_ptr[] = CONFIG_SYS_FPGA_PTR; - -struct { - u8 bus; - u8 addr; -} strider_fans[] = CONFIG_STRIDER_FANS; - -int fpga_set_reg(u32 fpga, u16 *reg, off_t regoff, u16 data) -{ - int res; - - switch (fpga) { - case 0: - out_le16(reg, data); - break; - default: - res = mclink_send(fpga - 1, regoff, data); - if (res < 0) { - printf("mclink_send reg %02lx data %04x returned %d\n", - regoff, data, res); - return res; - } - break; - } - - return 0; -} - -int fpga_get_reg(u32 fpga, u16 *reg, off_t regoff, u16 *data) -{ - int res; - - switch (fpga) { - case 0: - *data = in_le16(reg); - break; - default: - if (fpga > mclink_fpgacount) - return -EINVAL; - res = mclink_receive(fpga - 1, regoff, data); - if (res < 0) { - printf("mclink_receive reg %02lx returned %d\n", - regoff, res); - return res; - } - } - - return 0; -} - -int checkboard(void) -{ - char *s = env_get("serial#"); - bool hw_type_cat = pca9698_get_value(0x20, 18); - - puts("Board: "); - - printf("Strider %s", hw_type_cat ? "CAT" : "Fiber"); - - if (s) { - puts(", serial# "); - puts(s); - } - - puts("\n"); - - return 0; -} - -int last_stage_init(void) -{ - int slaves; - uint k; - uint mux_ch; - uchar mclink_controllers_dvi[] = { 0x3c, 0x3d, 0x3e }; -#ifdef CONFIG_STRIDER_CPU - uchar mclink_controllers_dp[] = { 0x24, 0x25, 0x26 }; -#endif - bool hw_type_cat = pca9698_get_value(0x20, 18); -#ifdef CONFIG_STRIDER_CON_DP - bool is_dh = pca9698_get_value(0x20, 25); -#endif - bool ch0_sgmii2_present; - - /* Turn on Analog Devices ADV7611 */ - pca9698_direction_output(0x20, 8, 0); - - /* Turn on Parade DP501 */ - pca9698_direction_output(0x20, 10, 1); - pca9698_direction_output(0x20, 11, 1); - - ch0_sgmii2_present = !pca9698_get_value(0x20, 37); - - /* wait for FPGA done, then reset FPGA */ - for (k = 0; k < ARRAY_SIZE(mclink_controllers_dvi); ++k) { - uint ctr = 0; - uchar *mclink_controllers = mclink_controllers_dvi; - -#ifdef CONFIG_STRIDER_CPU - if (i2c_probe(mclink_controllers[k])) { - mclink_controllers = mclink_controllers_dp; - if (i2c_probe(mclink_controllers[k])) - continue; - } -#else - if (i2c_probe(mclink_controllers[k])) - continue; -#endif - while (!(pca953x_get_val(mclink_controllers[k]) - & MCFPGA_DONE)) { - mdelay(100); - if (ctr++ > 5) { - printf("no done for mclink_controller %d\n", k); - break; - } - } - - pca953x_set_dir(mclink_controllers[k], MCFPGA_RESET_N, 0); - pca953x_set_val(mclink_controllers[k], MCFPGA_RESET_N, 0); - udelay(10); - pca953x_set_val(mclink_controllers[k], MCFPGA_RESET_N, - MCFPGA_RESET_N); - } - - if (hw_type_cat) { - int retval; - struct mii_dev *mdiodev = mdio_alloc(); - - if (!mdiodev) - return -ENOMEM; - strncpy(mdiodev->name, bb_miiphy_buses[0].name, MDIO_NAME_LEN); - mdiodev->read = bb_miiphy_read; - mdiodev->write = bb_miiphy_write; - - retval = mdio_register(mdiodev); - if (retval < 0) - return retval; - for (mux_ch = 0; mux_ch < MAX_MUX_CHANNELS; ++mux_ch) { - if ((mux_ch == 1) && !ch0_sgmii2_present) - continue; - - setup_88e1514(bb_miiphy_buses[0].name, mux_ch); - } - } - - /* give slave-PLLs and Parade DP501 some time to be up and running */ - mdelay(500); - - mclink_fpgacount = CONFIG_SYS_MCLINK_MAX; - slaves = mclink_probe(); - mclink_fpgacount = 0; - - ioep_fpga_print_info(0); - - if (!adv7611_probe(0)) - printf(" Advantiv ADV7611 HDMI Receiver\n"); - -#ifdef CONFIG_STRIDER_CON - if (ioep_fpga_has_osd(0)) - osd_probe(0); -#endif - -#ifdef CONFIG_STRIDER_CON_DP - if (ioep_fpga_has_osd(0)) { - osd_probe(0); - if (is_dh) - osd_probe(4); - } -#endif - -#ifdef CONFIG_STRIDER_CPU - ch7301_probe(0, false); - dp501_probe(0, false); -#endif - - if (slaves <= 0) - return 0; - - mclink_fpgacount = slaves; - -#ifdef CONFIG_STRIDER_CPU - /* get ADV7611 out of reset, power up DP501, give some time to wakeup */ - for (k = 1; k <= slaves; ++k) - FPGA_SET_REG(k, extended_control, 0x10); /* enable video */ - - mdelay(500); -#endif - - for (k = 1; k <= slaves; ++k) { - ioep_fpga_print_info(k); -#ifdef CONFIG_STRIDER_CON - if (ioep_fpga_has_osd(k)) - osd_probe(k); -#endif -#ifdef CONFIG_STRIDER_CON_DP - if (ioep_fpga_has_osd(k)) { - osd_probe(k); - if (is_dh) - osd_probe(k + 4); - } -#endif -#ifdef CONFIG_STRIDER_CPU - if (!adv7611_probe(k)) - printf(" Advantiv ADV7611 HDMI Receiver\n"); - ch7301_probe(k, false); - dp501_probe(k, false); -#endif - if (hw_type_cat) { - int retval; - struct mii_dev *mdiodev = mdio_alloc(); - - if (!mdiodev) - return -ENOMEM; - strncpy(mdiodev->name, bb_miiphy_buses[k].name, - MDIO_NAME_LEN); - mdiodev->read = bb_miiphy_read; - mdiodev->write = bb_miiphy_write; - - retval = mdio_register(mdiodev); - if (retval < 0) - return retval; - setup_88e1514(bb_miiphy_buses[k].name, 0); - } - } - - for (k = 0; k < ARRAY_SIZE(strider_fans); ++k) { - i2c_set_bus_num(strider_fans[k].bus); - init_fan_controller(strider_fans[k].addr); - } - - return 0; -} - -/* - * provide access to fpga gpios (for I2C bitbang) - * (these may look all too simple but make iocon.h much more readable) - */ -void fpga_gpio_set(uint bus, int pin) -{ - FPGA_SET_REG(bus, gpio.set, pin); -} - -void fpga_gpio_clear(uint bus, int pin) -{ - FPGA_SET_REG(bus, gpio.clear, pin); -} - -int fpga_gpio_get(uint bus, int pin) -{ - u16 val; - - FPGA_GET_REG(bus, gpio.read, &val); - - return val & pin; -} - -#ifdef CONFIG_STRIDER_CON_DP -void fpga_control_set(uint bus, int pin) -{ - u16 val; - - FPGA_GET_REG(bus, control, &val); - FPGA_SET_REG(bus, control, val | pin); -} - -void fpga_control_clear(uint bus, int pin) -{ - u16 val; - - FPGA_GET_REG(bus, control, &val); - FPGA_SET_REG(bus, control, val & ~pin); -} -#endif - -void mpc8308_init(void) -{ - pca9698_direction_output(0x20, 26, 1); -} - -void mpc8308_set_fpga_reset(uint state) -{ - pca9698_set_value(0x20, 26, state ? 0 : 1); -} - -void mpc8308_setup_hw(void) -{ - immap_t *immr = (immap_t *)CONFIG_SYS_IMMR; - - /* - * set "startup-finished"-gpios - */ - setbits_be32(&immr->gpio[0].dir, BIT(31 - 11) | BIT(31 - 12)); - setbits_gpio0_out(BIT(31 - 12)); -} - -int mpc8308_get_fpga_done(uint fpga) -{ - return pca9698_get_value(0x20, 20); -} - -#ifdef CONFIG_FSL_ESDHC -int board_mmc_init(struct bd_info *bd) -{ - immap_t *immr = (immap_t *)CONFIG_SYS_IMMR; - sysconf83xx_t *sysconf = &immr->sysconf; - - /* Enable cache snooping in eSDHC system configuration register */ - out_be32(&sysconf->sdhccr, 0x02000000); - - return fsl_esdhc_mmc_init(bd); -} -#endif - -static struct pci_region pcie_regions_0[] = { - { - .bus_start = CONFIG_SYS_PCIE1_MEM_BASE, - .phys_start = CONFIG_SYS_PCIE1_MEM_PHYS, - .size = CONFIG_SYS_PCIE1_MEM_SIZE, - .flags = PCI_REGION_MEM, - }, - { - .bus_start = CONFIG_SYS_PCIE1_IO_BASE, - .phys_start = CONFIG_SYS_PCIE1_IO_PHYS, - .size = CONFIG_SYS_PCIE1_IO_SIZE, - .flags = PCI_REGION_IO, - }, -}; - -void pci_init_board(void) -{ - immap_t *immr = (immap_t *)CONFIG_SYS_IMMR; - sysconf83xx_t *sysconf = &immr->sysconf; - law83xx_t *pcie_law = sysconf->pcielaw; - struct pci_region *pcie_reg[] = { pcie_regions_0 }; - - fsl_setup_serdes(CONFIG_FSL_SERDES1, FSL_SERDES_PROTO_PEX, - FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V); - - /* Deassert the resets in the control register */ - out_be32(&sysconf->pecr1, 0xE0008000); - udelay(2000); - - /* Configure PCI Express Local Access Windows */ - out_be32(&pcie_law[0].bar, CONFIG_SYS_PCIE1_BASE & LAWBAR_BAR); - out_be32(&pcie_law[0].ar, LBLAWAR_EN | LBLAWAR_512MB); - - mpc83xx_pcie_init(1, pcie_reg); -} - -ulong board_flash_get_legacy(ulong base, int banknum, flash_info_t *info) -{ - info->portwidth = FLASH_CFI_16BIT; - info->chipwidth = FLASH_CFI_BY16; - info->interface = FLASH_CFI_X16; - return 1; -} - -#if defined(CONFIG_OF_BOARD_SETUP) -int ft_board_setup(void *blob, struct bd_info *bd) -{ - ft_cpu_setup(blob, bd); - fsl_fdt_fixup_dr_usb(blob, bd); - fdt_fixup_esdhc(blob, bd); - - return 0; -} -#endif - -/* - * FPGA MII bitbang implementation - */ - -struct fpga_mii { - uint fpga; - int mdio; -} fpga_mii[] = { - { 0, 1}, - { 1, 1}, - { 2, 1}, - { 3, 1}, -}; - -static int mii_dummy_init(struct bb_miiphy_bus *bus) -{ - return 0; -} - -static int mii_mdio_active(struct bb_miiphy_bus *bus) -{ - struct fpga_mii *fpga_mii = bus->priv; - - if (fpga_mii->mdio) - FPGA_SET_REG(fpga_mii->fpga, gpio.set, GPIO_MDIO); - else - FPGA_SET_REG(fpga_mii->fpga, gpio.clear, GPIO_MDIO); - - return 0; -} - -static int mii_mdio_tristate(struct bb_miiphy_bus *bus) -{ - struct fpga_mii *fpga_mii = bus->priv; - - FPGA_SET_REG(fpga_mii->fpga, gpio.set, GPIO_MDIO); - - return 0; -} - -static int mii_set_mdio(struct bb_miiphy_bus *bus, int v) -{ - struct fpga_mii *fpga_mii = bus->priv; - - if (v) - FPGA_SET_REG(fpga_mii->fpga, gpio.set, GPIO_MDIO); - else - FPGA_SET_REG(fpga_mii->fpga, gpio.clear, GPIO_MDIO); - - fpga_mii->mdio = v; - - return 0; -} - -static int mii_get_mdio(struct bb_miiphy_bus *bus, int *v) -{ - u16 gpio; - struct fpga_mii *fpga_mii = bus->priv; - - FPGA_GET_REG(fpga_mii->fpga, gpio.read, &gpio); - - *v = ((gpio & GPIO_MDIO) != 0); - - return 0; -} - -static int mii_set_mdc(struct bb_miiphy_bus *bus, int v) -{ - struct fpga_mii *fpga_mii = bus->priv; - - if (v) - FPGA_SET_REG(fpga_mii->fpga, gpio.set, GPIO_MDC); - else - FPGA_SET_REG(fpga_mii->fpga, gpio.clear, GPIO_MDC); - - return 0; -} - -static int mii_delay(struct bb_miiphy_bus *bus) -{ - udelay(1); - - return 0; -} - -struct bb_miiphy_bus bb_miiphy_buses[] = { - { - .name = "board0", - .init = mii_dummy_init, - .mdio_active = mii_mdio_active, - .mdio_tristate = mii_mdio_tristate, - .set_mdio = mii_set_mdio, - .get_mdio = mii_get_mdio, - .set_mdc = mii_set_mdc, - .delay = mii_delay, - .priv = &fpga_mii[0], - }, - { - .name = "board1", - .init = mii_dummy_init, - .mdio_active = mii_mdio_active, - .mdio_tristate = mii_mdio_tristate, - .set_mdio = mii_set_mdio, - .get_mdio = mii_get_mdio, - .set_mdc = mii_set_mdc, - .delay = mii_delay, - .priv = &fpga_mii[1], - }, - { - .name = "board2", - .init = mii_dummy_init, - .mdio_active = mii_mdio_active, - .mdio_tristate = mii_mdio_tristate, - .set_mdio = mii_set_mdio, - .get_mdio = mii_get_mdio, - .set_mdc = mii_set_mdc, - .delay = mii_delay, - .priv = &fpga_mii[2], - }, - { - .name = "board3", - .init = mii_dummy_init, - .mdio_active = mii_mdio_active, - .mdio_tristate = mii_mdio_tristate, - .set_mdio = mii_set_mdio, - .get_mdio = mii_get_mdio, - .set_mdc = mii_set_mdc, - .delay = mii_delay, - .priv = &fpga_mii[3], - }, -}; - -int bb_miiphy_buses_num = ARRAY_SIZE(bb_miiphy_buses); diff --git a/configs/strider_con_defconfig b/configs/strider_con_defconfig deleted file mode 100644 index 0ec9e27810..0000000000 --- a/configs/strider_con_defconfig +++ /dev/null @@ -1,146 +0,0 @@ -CONFIG_PPC=y -CONFIG_SYS_TEXT_BASE=0xFE000000 -CONFIG_SYS_MEMTEST_START=0x00001000 -CONFIG_SYS_MEMTEST_END=0x07f00000 -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_SECT_SIZE=0x10000 -CONFIG_IDENT_STRING=" strider con 0.01" -CONFIG_SYS_CLK_FREQ=33333333 -CONFIG_MPC83xx=y -CONFIG_TARGET_STRIDER=y -CONFIG_SYSTEM_PLL_VCO_DIV_2=y -CONFIG_SYSTEM_PLL_FACTOR_4_1=y -CONFIG_CORE_PLL_RATIO_3_1=y -CONFIG_BOOT_ROM_INTERFACE_GPCM_16BIT=y -CONFIG_TSEC2_MODE_RGMII=y -CONFIG_BAT0=y -CONFIG_BAT0_NAME="DDR" -CONFIG_BAT0_BASE=0x00000000 -CONFIG_BAT0_LENGTH_128_MBYTES=y -CONFIG_BAT0_ACCESS_RW=y -CONFIG_BAT0_ICACHE_MEMORYCOHERENCE=y -CONFIG_BAT0_DCACHE_MEMORYCOHERENCE=y -CONFIG_BAT0_USER_MODE_VALID=y -CONFIG_BAT0_SUPERVISOR_MODE_VALID=y -CONFIG_BAT1=y -CONFIG_BAT1_NAME="IMMRBAR" -CONFIG_BAT1_BASE=0xE0000000 -CONFIG_BAT1_LENGTH_8_MBYTES=y -CONFIG_BAT1_ACCESS_RW=y -CONFIG_BAT1_ICACHE_INHIBITED=y -CONFIG_BAT1_ICACHE_GUARDED=y -CONFIG_BAT1_DCACHE_INHIBITED=y -CONFIG_BAT1_DCACHE_GUARDED=y -CONFIG_BAT1_USER_MODE_VALID=y -CONFIG_BAT1_SUPERVISOR_MODE_VALID=y -CONFIG_BAT2=y -CONFIG_BAT2_NAME="FLASH" -CONFIG_BAT2_BASE=0xFE000000 -CONFIG_BAT2_LENGTH_8_MBYTES=y -CONFIG_BAT2_ACCESS_RW=y -CONFIG_BAT2_ICACHE_MEMORYCOHERENCE=y -CONFIG_BAT2_DCACHE_INHIBITED=y -CONFIG_BAT2_DCACHE_GUARDED=y -CONFIG_BAT2_USER_MODE_VALID=y -CONFIG_BAT2_SUPERVISOR_MODE_VALID=y -CONFIG_BAT3=y -CONFIG_BAT3_NAME="STACK_IN_DCACHE" -CONFIG_BAT3_BASE=0xE6000000 -CONFIG_BAT3_ACCESS_RW=y -CONFIG_BAT3_USER_MODE_VALID=y -CONFIG_BAT3_SUPERVISOR_MODE_VALID=y -CONFIG_LBLAW0=y -CONFIG_LBLAW0_BASE=0xFE000000 -CONFIG_LBLAW0_NAME="FLASH" -CONFIG_LBLAW0_LENGTH_8_MBYTES=y -CONFIG_LBLAW1=y -CONFIG_LBLAW1_BASE=0xE0600000 -CONFIG_LBLAW1_NAME="FPGA0" -CONFIG_LBLAW1_LENGTH_1_MBYTES=y -CONFIG_ELBC_BR0_OR0=y -CONFIG_BR0_OR0_NAME="FLASH" -CONFIG_BR0_OR0_BASE=0xFE000000 -CONFIG_BR0_PORTSIZE_16BIT=y -CONFIG_OR0_AM_8_MBYTES=y -CONFIG_OR0_XAM_SET=y -CONFIG_OR0_SCY_15=y -CONFIG_OR0_CSNT_EARLIER=y -CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y -CONFIG_OR0_XACS_EXTENDED=y -CONFIG_OR0_TRLX_RELAXED=y -CONFIG_OR0_EHTR_8_CYCLE=y -CONFIG_ELBC_BR1_OR1=y -CONFIG_BR1_OR1_NAME="FPGA" -CONFIG_BR1_OR1_BASE=0xE0600000 -CONFIG_BR1_PORTSIZE_16BIT=y -CONFIG_OR1_AM_1_MBYTES=y -CONFIG_OR1_XAM_SET=y -CONFIG_OR1_SCY_5=y -CONFIG_OR1_CSNT_EARLIER=y -CONFIG_HID0_FINAL_EMCP=y -CONFIG_HID0_FINAL_DPM=y -CONFIG_HID0_FINAL_ICE=y -CONFIG_HID2_HBE=y -CONFIG_SICR_IEEE1588_A_GPIO=y -CONFIG_SICR_GTM_GPIO=y -CONFIG_SICR_ETSEC2_GPIO=y -CONFIG_SICR_GPIOSEL_IEEE1588=y -CONFIG_SICR_TMSOBI1_2_5_V=y -CONFIG_SICR_TMSOBI2_2_5_V=y -CONFIG_ACR_PIPE_DEP_4=y -CONFIG_ACR_RPTCNT_4=y -CONFIG_SPCR_TSECEP_3=y -CONFIG_LCRR_DBYP_PLL_BYPASSED=y -CONFIG_LCRR_CLKDIV_2=y -CONFIG_CMD_IOLOOP=y -CONFIG_FIT=y -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="STRIDER_CON" -CONFIG_BOOTDELAY=5 -CONFIG_AUTOBOOT_KEYED=y -CONFIG_AUTOBOOT_STOP_STR=" " -CONFIG_USE_PREBOOT=y -CONFIG_SYS_CONSOLE_INFO_QUIET=y -# CONFIG_DISPLAY_BOARDINFO is not set -CONFIG_BOARD_EARLY_INIT_F=y -CONFIG_BOARD_EARLY_INIT_R=y -CONFIG_LAST_STAGE_INIT=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_IMLS=y -CONFIG_CMD_MEMTEST=y -CONFIG_SYS_ALT_MEMTEST=y -CONFIG_CMD_FPGAD=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_PCI=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_DOS_PARTITION=y -CONFIG_ENV_OVERWRITE=y -CONFIG_SYS_REDUNDAND_ENVIRONMENT=y -CONFIG_ENV_ADDR=0xFE060000 -CONFIG_ENV_ADDR_REDUND=0xFE070000 -CONFIG_FSL_ESDHC=y -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_SYS_FLASH_PROTECTION=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_BITBANGMII=y -CONFIG_PHY_ATHEROS=y -CONFIG_PHY_BROADCOM=y -CONFIG_PHY_DAVICOM=y -CONFIG_PHY_LXT=y -CONFIG_PHY_MARVELL=y -CONFIG_PHY_NATSEMI=y -CONFIG_PHY_REALTEK=y -CONFIG_PHY_SMSC=y -CONFIG_PHY_VITESSE=y -CONFIG_MII=y -CONFIG_TSEC_ENET=y -CONFIG_CONS_INDEX=2 -CONFIG_SYS_NS16550=y -CONFIG_OF_LIBFDT=y diff --git a/configs/strider_con_dp_defconfig b/configs/strider_con_dp_defconfig deleted file mode 100644 index 304f9caca7..0000000000 --- a/configs/strider_con_dp_defconfig +++ /dev/null @@ -1,146 +0,0 @@ -CONFIG_PPC=y -CONFIG_SYS_TEXT_BASE=0xFE000000 -CONFIG_SYS_MEMTEST_START=0x00001000 -CONFIG_SYS_MEMTEST_END=0x07f00000 -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_SECT_SIZE=0x10000 -CONFIG_IDENT_STRING=" strider con dp 0.01" -CONFIG_SYS_CLK_FREQ=33333333 -CONFIG_MPC83xx=y -CONFIG_TARGET_STRIDER=y -CONFIG_SYSTEM_PLL_VCO_DIV_2=y -CONFIG_SYSTEM_PLL_FACTOR_4_1=y -CONFIG_CORE_PLL_RATIO_3_1=y -CONFIG_BOOT_ROM_INTERFACE_GPCM_16BIT=y -CONFIG_TSEC2_MODE_RGMII=y -CONFIG_BAT0=y -CONFIG_BAT0_NAME="DDR" -CONFIG_BAT0_BASE=0x00000000 -CONFIG_BAT0_LENGTH_128_MBYTES=y -CONFIG_BAT0_ACCESS_RW=y -CONFIG_BAT0_ICACHE_MEMORYCOHERENCE=y -CONFIG_BAT0_DCACHE_MEMORYCOHERENCE=y -CONFIG_BAT0_USER_MODE_VALID=y -CONFIG_BAT0_SUPERVISOR_MODE_VALID=y -CONFIG_BAT1=y -CONFIG_BAT1_NAME="IMMRBAR" -CONFIG_BAT1_BASE=0xE0000000 -CONFIG_BAT1_LENGTH_8_MBYTES=y -CONFIG_BAT1_ACCESS_RW=y -CONFIG_BAT1_ICACHE_INHIBITED=y -CONFIG_BAT1_ICACHE_GUARDED=y -CONFIG_BAT1_DCACHE_INHIBITED=y -CONFIG_BAT1_DCACHE_GUARDED=y -CONFIG_BAT1_USER_MODE_VALID=y -CONFIG_BAT1_SUPERVISOR_MODE_VALID=y -CONFIG_BAT2=y -CONFIG_BAT2_NAME="FLASH" -CONFIG_BAT2_BASE=0xFE000000 -CONFIG_BAT2_LENGTH_8_MBYTES=y -CONFIG_BAT2_ACCESS_RW=y -CONFIG_BAT2_ICACHE_MEMORYCOHERENCE=y -CONFIG_BAT2_DCACHE_INHIBITED=y -CONFIG_BAT2_DCACHE_GUARDED=y -CONFIG_BAT2_USER_MODE_VALID=y -CONFIG_BAT2_SUPERVISOR_MODE_VALID=y -CONFIG_BAT3=y -CONFIG_BAT3_NAME="STACK_IN_DCACHE" -CONFIG_BAT3_BASE=0xE6000000 -CONFIG_BAT3_ACCESS_RW=y -CONFIG_BAT3_USER_MODE_VALID=y -CONFIG_BAT3_SUPERVISOR_MODE_VALID=y -CONFIG_LBLAW0=y -CONFIG_LBLAW0_BASE=0xFE000000 -CONFIG_LBLAW0_NAME="FLASH" -CONFIG_LBLAW0_LENGTH_8_MBYTES=y -CONFIG_LBLAW1=y -CONFIG_LBLAW1_BASE=0xE0600000 -CONFIG_LBLAW1_NAME="FPGA0" -CONFIG_LBLAW1_LENGTH_1_MBYTES=y -CONFIG_ELBC_BR0_OR0=y -CONFIG_BR0_OR0_NAME="FLASH" -CONFIG_BR0_OR0_BASE=0xFE000000 -CONFIG_BR0_PORTSIZE_16BIT=y -CONFIG_OR0_AM_8_MBYTES=y -CONFIG_OR0_XAM_SET=y -CONFIG_OR0_SCY_15=y -CONFIG_OR0_CSNT_EARLIER=y -CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y -CONFIG_OR0_XACS_EXTENDED=y -CONFIG_OR0_TRLX_RELAXED=y -CONFIG_OR0_EHTR_8_CYCLE=y -CONFIG_ELBC_BR1_OR1=y -CONFIG_BR1_OR1_NAME="FPGA" -CONFIG_BR1_OR1_BASE=0xE0600000 -CONFIG_BR1_PORTSIZE_16BIT=y -CONFIG_OR1_AM_1_MBYTES=y -CONFIG_OR1_XAM_SET=y -CONFIG_OR1_SCY_5=y -CONFIG_OR1_CSNT_EARLIER=y -CONFIG_HID0_FINAL_EMCP=y -CONFIG_HID0_FINAL_DPM=y -CONFIG_HID0_FINAL_ICE=y -CONFIG_HID2_HBE=y -CONFIG_SICR_IEEE1588_A_GPIO=y -CONFIG_SICR_GTM_GPIO=y -CONFIG_SICR_ETSEC2_GPIO=y -CONFIG_SICR_GPIOSEL_IEEE1588=y -CONFIG_SICR_TMSOBI1_2_5_V=y -CONFIG_SICR_TMSOBI2_2_5_V=y -CONFIG_ACR_PIPE_DEP_4=y -CONFIG_ACR_RPTCNT_4=y -CONFIG_SPCR_TSECEP_3=y -CONFIG_LCRR_DBYP_PLL_BYPASSED=y -CONFIG_LCRR_CLKDIV_2=y -CONFIG_CMD_IOLOOP=y -CONFIG_FIT=y -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="STRIDER_CON_DP" -CONFIG_BOOTDELAY=5 -CONFIG_AUTOBOOT_KEYED=y -CONFIG_AUTOBOOT_STOP_STR=" " -CONFIG_USE_PREBOOT=y -CONFIG_SYS_CONSOLE_INFO_QUIET=y -# CONFIG_DISPLAY_BOARDINFO is not set -CONFIG_BOARD_EARLY_INIT_F=y -CONFIG_BOARD_EARLY_INIT_R=y -CONFIG_LAST_STAGE_INIT=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_IMLS=y -CONFIG_CMD_MEMTEST=y -CONFIG_SYS_ALT_MEMTEST=y -CONFIG_CMD_FPGAD=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_PCI=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_DOS_PARTITION=y -CONFIG_ENV_OVERWRITE=y -CONFIG_SYS_REDUNDAND_ENVIRONMENT=y -CONFIG_ENV_ADDR=0xFE060000 -CONFIG_ENV_ADDR_REDUND=0xFE070000 -CONFIG_FSL_ESDHC=y -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_SYS_FLASH_PROTECTION=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_BITBANGMII=y -CONFIG_PHY_ATHEROS=y -CONFIG_PHY_BROADCOM=y -CONFIG_PHY_DAVICOM=y -CONFIG_PHY_LXT=y -CONFIG_PHY_MARVELL=y -CONFIG_PHY_NATSEMI=y -CONFIG_PHY_REALTEK=y -CONFIG_PHY_SMSC=y -CONFIG_PHY_VITESSE=y -CONFIG_MII=y -CONFIG_TSEC_ENET=y -CONFIG_CONS_INDEX=2 -CONFIG_SYS_NS16550=y -CONFIG_OF_LIBFDT=y diff --git a/configs/strider_cpu_defconfig b/configs/strider_cpu_defconfig deleted file mode 100644 index d1c388cfb8..0000000000 --- a/configs/strider_cpu_defconfig +++ /dev/null @@ -1,146 +0,0 @@ -CONFIG_PPC=y -CONFIG_SYS_TEXT_BASE=0xFE000000 -CONFIG_SYS_MEMTEST_START=0x00001000 -CONFIG_SYS_MEMTEST_END=0x07f00000 -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_SECT_SIZE=0x10000 -CONFIG_IDENT_STRING=" strider cpu 0.01" -CONFIG_SYS_CLK_FREQ=33333333 -CONFIG_MPC83xx=y -CONFIG_TARGET_STRIDER=y -CONFIG_SYSTEM_PLL_VCO_DIV_2=y -CONFIG_SYSTEM_PLL_FACTOR_4_1=y -CONFIG_CORE_PLL_RATIO_3_1=y -CONFIG_BOOT_ROM_INTERFACE_GPCM_16BIT=y -CONFIG_TSEC2_MODE_RGMII=y -CONFIG_BAT0=y -CONFIG_BAT0_NAME="DDR" -CONFIG_BAT0_BASE=0x00000000 -CONFIG_BAT0_LENGTH_128_MBYTES=y -CONFIG_BAT0_ACCESS_RW=y -CONFIG_BAT0_ICACHE_MEMORYCOHERENCE=y -CONFIG_BAT0_DCACHE_MEMORYCOHERENCE=y -CONFIG_BAT0_USER_MODE_VALID=y -CONFIG_BAT0_SUPERVISOR_MODE_VALID=y -CONFIG_BAT1=y -CONFIG_BAT1_NAME="IMMRBAR" -CONFIG_BAT1_BASE=0xE0000000 -CONFIG_BAT1_LENGTH_8_MBYTES=y -CONFIG_BAT1_ACCESS_RW=y -CONFIG_BAT1_ICACHE_INHIBITED=y -CONFIG_BAT1_ICACHE_GUARDED=y -CONFIG_BAT1_DCACHE_INHIBITED=y -CONFIG_BAT1_DCACHE_GUARDED=y -CONFIG_BAT1_USER_MODE_VALID=y -CONFIG_BAT1_SUPERVISOR_MODE_VALID=y -CONFIG_BAT2=y -CONFIG_BAT2_NAME="FLASH" -CONFIG_BAT2_BASE=0xFE000000 -CONFIG_BAT2_LENGTH_8_MBYTES=y -CONFIG_BAT2_ACCESS_RW=y -CONFIG_BAT2_ICACHE_MEMORYCOHERENCE=y -CONFIG_BAT2_DCACHE_INHIBITED=y -CONFIG_BAT2_DCACHE_GUARDED=y -CONFIG_BAT2_USER_MODE_VALID=y -CONFIG_BAT2_SUPERVISOR_MODE_VALID=y -CONFIG_BAT3=y -CONFIG_BAT3_NAME="STACK_IN_DCACHE" -CONFIG_BAT3_BASE=0xE6000000 -CONFIG_BAT3_ACCESS_RW=y -CONFIG_BAT3_USER_MODE_VALID=y -CONFIG_BAT3_SUPERVISOR_MODE_VALID=y -CONFIG_LBLAW0=y -CONFIG_LBLAW0_BASE=0xFE000000 -CONFIG_LBLAW0_NAME="FLASH" -CONFIG_LBLAW0_LENGTH_8_MBYTES=y -CONFIG_LBLAW1=y -CONFIG_LBLAW1_BASE=0xE0600000 -CONFIG_LBLAW1_NAME="FPGA0" -CONFIG_LBLAW1_LENGTH_1_MBYTES=y -CONFIG_ELBC_BR0_OR0=y -CONFIG_BR0_OR0_NAME="FLASH" -CONFIG_BR0_OR0_BASE=0xFE000000 -CONFIG_BR0_PORTSIZE_16BIT=y -CONFIG_OR0_AM_8_MBYTES=y -CONFIG_OR0_XAM_SET=y -CONFIG_OR0_SCY_15=y -CONFIG_OR0_CSNT_EARLIER=y -CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y -CONFIG_OR0_XACS_EXTENDED=y -CONFIG_OR0_TRLX_RELAXED=y -CONFIG_OR0_EHTR_8_CYCLE=y -CONFIG_ELBC_BR1_OR1=y -CONFIG_BR1_OR1_NAME="FPGA" -CONFIG_BR1_OR1_BASE=0xE0600000 -CONFIG_BR1_PORTSIZE_16BIT=y -CONFIG_OR1_AM_1_MBYTES=y -CONFIG_OR1_XAM_SET=y -CONFIG_OR1_SCY_5=y -CONFIG_OR1_CSNT_EARLIER=y -CONFIG_HID0_FINAL_EMCP=y -CONFIG_HID0_FINAL_DPM=y -CONFIG_HID0_FINAL_ICE=y -CONFIG_HID2_HBE=y -CONFIG_SICR_IEEE1588_A_GPIO=y -CONFIG_SICR_GTM_GPIO=y -CONFIG_SICR_ETSEC2_GPIO=y -CONFIG_SICR_GPIOSEL_IEEE1588=y -CONFIG_SICR_TMSOBI1_2_5_V=y -CONFIG_SICR_TMSOBI2_2_5_V=y -CONFIG_ACR_PIPE_DEP_4=y -CONFIG_ACR_RPTCNT_4=y -CONFIG_SPCR_TSECEP_3=y -CONFIG_LCRR_DBYP_PLL_BYPASSED=y -CONFIG_LCRR_CLKDIV_2=y -CONFIG_CMD_IOLOOP=y -CONFIG_FIT=y -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="STRIDER_CPU" -CONFIG_BOOTDELAY=5 -CONFIG_AUTOBOOT_KEYED=y -CONFIG_AUTOBOOT_STOP_STR=" " -CONFIG_USE_PREBOOT=y -CONFIG_SYS_CONSOLE_INFO_QUIET=y -# CONFIG_DISPLAY_BOARDINFO is not set -CONFIG_BOARD_EARLY_INIT_F=y -CONFIG_BOARD_EARLY_INIT_R=y -CONFIG_LAST_STAGE_INIT=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_IMLS=y -CONFIG_CMD_MEMTEST=y -CONFIG_SYS_ALT_MEMTEST=y -CONFIG_CMD_FPGAD=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_PCI=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_DOS_PARTITION=y -CONFIG_ENV_OVERWRITE=y -CONFIG_SYS_REDUNDAND_ENVIRONMENT=y -CONFIG_ENV_ADDR=0xFE060000 -CONFIG_ENV_ADDR_REDUND=0xFE070000 -CONFIG_FSL_ESDHC=y -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_SYS_FLASH_PROTECTION=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_BITBANGMII=y -CONFIG_PHY_ATHEROS=y -CONFIG_PHY_BROADCOM=y -CONFIG_PHY_DAVICOM=y -CONFIG_PHY_LXT=y -CONFIG_PHY_MARVELL=y -CONFIG_PHY_NATSEMI=y -CONFIG_PHY_REALTEK=y -CONFIG_PHY_SMSC=y -CONFIG_PHY_VITESSE=y -CONFIG_MII=y -CONFIG_TSEC_ENET=y -CONFIG_CONS_INDEX=2 -CONFIG_SYS_NS16550=y -CONFIG_OF_LIBFDT=y diff --git a/configs/strider_cpu_dp_defconfig b/configs/strider_cpu_dp_defconfig deleted file mode 100644 index 61c6240e94..0000000000 --- a/configs/strider_cpu_dp_defconfig +++ /dev/null @@ -1,146 +0,0 @@ -CONFIG_PPC=y -CONFIG_SYS_TEXT_BASE=0xFE000000 -CONFIG_SYS_MEMTEST_START=0x00001000 -CONFIG_SYS_MEMTEST_END=0x07f00000 -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_SECT_SIZE=0x10000 -CONFIG_IDENT_STRING=" strider cpu dp 0.01" -CONFIG_SYS_CLK_FREQ=33333333 -CONFIG_MPC83xx=y -CONFIG_TARGET_STRIDER=y -CONFIG_SYSTEM_PLL_VCO_DIV_2=y -CONFIG_SYSTEM_PLL_FACTOR_4_1=y -CONFIG_CORE_PLL_RATIO_3_1=y -CONFIG_BOOT_ROM_INTERFACE_GPCM_16BIT=y -CONFIG_TSEC2_MODE_RGMII=y -CONFIG_BAT0=y -CONFIG_BAT0_NAME="DDR" -CONFIG_BAT0_BASE=0x00000000 -CONFIG_BAT0_LENGTH_128_MBYTES=y -CONFIG_BAT0_ACCESS_RW=y -CONFIG_BAT0_ICACHE_MEMORYCOHERENCE=y -CONFIG_BAT0_DCACHE_MEMORYCOHERENCE=y -CONFIG_BAT0_USER_MODE_VALID=y -CONFIG_BAT0_SUPERVISOR_MODE_VALID=y -CONFIG_BAT1=y -CONFIG_BAT1_NAME="IMMRBAR" -CONFIG_BAT1_BASE=0xE0000000 -CONFIG_BAT1_LENGTH_8_MBYTES=y -CONFIG_BAT1_ACCESS_RW=y -CONFIG_BAT1_ICACHE_INHIBITED=y -CONFIG_BAT1_ICACHE_GUARDED=y -CONFIG_BAT1_DCACHE_INHIBITED=y -CONFIG_BAT1_DCACHE_GUARDED=y -CONFIG_BAT1_USER_MODE_VALID=y -CONFIG_BAT1_SUPERVISOR_MODE_VALID=y -CONFIG_BAT2=y -CONFIG_BAT2_NAME="FLASH" -CONFIG_BAT2_BASE=0xFE000000 -CONFIG_BAT2_LENGTH_8_MBYTES=y -CONFIG_BAT2_ACCESS_RW=y -CONFIG_BAT2_ICACHE_MEMORYCOHERENCE=y -CONFIG_BAT2_DCACHE_INHIBITED=y -CONFIG_BAT2_DCACHE_GUARDED=y -CONFIG_BAT2_USER_MODE_VALID=y -CONFIG_BAT2_SUPERVISOR_MODE_VALID=y -CONFIG_BAT3=y -CONFIG_BAT3_NAME="STACK_IN_DCACHE" -CONFIG_BAT3_BASE=0xE6000000 -CONFIG_BAT3_ACCESS_RW=y -CONFIG_BAT3_USER_MODE_VALID=y -CONFIG_BAT3_SUPERVISOR_MODE_VALID=y -CONFIG_LBLAW0=y -CONFIG_LBLAW0_BASE=0xFE000000 -CONFIG_LBLAW0_NAME="FLASH" -CONFIG_LBLAW0_LENGTH_8_MBYTES=y -CONFIG_LBLAW1=y -CONFIG_LBLAW1_BASE=0xE0600000 -CONFIG_LBLAW1_NAME="FPGA0" -CONFIG_LBLAW1_LENGTH_1_MBYTES=y -CONFIG_ELBC_BR0_OR0=y -CONFIG_BR0_OR0_NAME="FLASH" -CONFIG_BR0_OR0_BASE=0xFE000000 -CONFIG_BR0_PORTSIZE_16BIT=y -CONFIG_OR0_AM_8_MBYTES=y -CONFIG_OR0_XAM_SET=y -CONFIG_OR0_SCY_15=y -CONFIG_OR0_CSNT_EARLIER=y -CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y -CONFIG_OR0_XACS_EXTENDED=y -CONFIG_OR0_TRLX_RELAXED=y -CONFIG_OR0_EHTR_8_CYCLE=y -CONFIG_ELBC_BR1_OR1=y -CONFIG_BR1_OR1_NAME="FPGA" -CONFIG_BR1_OR1_BASE=0xE0600000 -CONFIG_BR1_PORTSIZE_16BIT=y -CONFIG_OR1_AM_1_MBYTES=y -CONFIG_OR1_XAM_SET=y -CONFIG_OR1_SCY_5=y -CONFIG_OR1_CSNT_EARLIER=y -CONFIG_HID0_FINAL_EMCP=y -CONFIG_HID0_FINAL_DPM=y -CONFIG_HID0_FINAL_ICE=y -CONFIG_HID2_HBE=y -CONFIG_SICR_IEEE1588_A_GPIO=y -CONFIG_SICR_GTM_GPIO=y -CONFIG_SICR_ETSEC2_GPIO=y -CONFIG_SICR_GPIOSEL_IEEE1588=y -CONFIG_SICR_TMSOBI1_2_5_V=y -CONFIG_SICR_TMSOBI2_2_5_V=y -CONFIG_ACR_PIPE_DEP_4=y -CONFIG_ACR_RPTCNT_4=y -CONFIG_SPCR_TSECEP_3=y -CONFIG_LCRR_DBYP_PLL_BYPASSED=y -CONFIG_LCRR_CLKDIV_2=y -CONFIG_CMD_IOLOOP=y -CONFIG_FIT=y -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="STRIDER_CPU,STRIDER_CPU_DP" -CONFIG_BOOTDELAY=5 -CONFIG_AUTOBOOT_KEYED=y -CONFIG_AUTOBOOT_STOP_STR=" " -CONFIG_USE_PREBOOT=y -CONFIG_SYS_CONSOLE_INFO_QUIET=y -# CONFIG_DISPLAY_BOARDINFO is not set -CONFIG_BOARD_EARLY_INIT_F=y -CONFIG_BOARD_EARLY_INIT_R=y -CONFIG_LAST_STAGE_INIT=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_IMLS=y -CONFIG_CMD_MEMTEST=y -CONFIG_SYS_ALT_MEMTEST=y -CONFIG_CMD_FPGAD=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_PCI=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_DOS_PARTITION=y -CONFIG_ENV_OVERWRITE=y -CONFIG_SYS_REDUNDAND_ENVIRONMENT=y -CONFIG_ENV_ADDR=0xFE060000 -CONFIG_ENV_ADDR_REDUND=0xFE070000 -CONFIG_FSL_ESDHC=y -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_SYS_FLASH_PROTECTION=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_BITBANGMII=y -CONFIG_PHY_ATHEROS=y -CONFIG_PHY_BROADCOM=y -CONFIG_PHY_DAVICOM=y -CONFIG_PHY_LXT=y -CONFIG_PHY_MARVELL=y -CONFIG_PHY_NATSEMI=y -CONFIG_PHY_REALTEK=y -CONFIG_PHY_SMSC=y -CONFIG_PHY_VITESSE=y -CONFIG_MII=y -CONFIG_TSEC_ENET=y -CONFIG_CONS_INDEX=2 -CONFIG_SYS_NS16550=y -CONFIG_OF_LIBFDT=y diff --git a/include/configs/strider.h b/include/configs/strider.h deleted file mode 100644 index 85db657077..0000000000 --- a/include/configs/strider.h +++ /dev/null @@ -1,454 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * (C) Copyright 2014 - * Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc - * - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#include - -/* - * High Level Configuration Options - */ -#define CONFIG_E300 1 /* E300 family */ - -#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC83xx_ESDHC_ADDR - -/* - * SERDES - */ -#define CONFIG_FSL_SERDES -#define CONFIG_FSL_SERDES1 0xe3000 - -/* - * DDR Setup - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 /* DDR is system memory */ -#define CONFIG_SYS_DDR_SDRAM_CLK_CNTL DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05 -#define CONFIG_SYS_DDRCDR_VALUE (DDRCDR_EN \ - | DDRCDR_PZ_LOZ \ - | DDRCDR_NZ_LOZ \ - | DDRCDR_ODT \ - | DDRCDR_Q_DRN) - /* 0x7b880001 */ -/* - * Manually set up DDR parameters - * consist of one chip NT5TU64M16HG from NANYA - */ - -#define CONFIG_SYS_DDR_SIZE 128 /* MB */ - -#define CONFIG_SYS_DDR_CS0_BNDS 0x00000007 -#define CONFIG_SYS_DDR_CS0_CONFIG (CSCONFIG_EN \ - | CSCONFIG_ODT_RD_NEVER \ - | CSCONFIG_ODT_WR_ONLY_CURRENT \ - | CSCONFIG_BANK_BIT_3 \ - | CSCONFIG_ROW_BIT_13 | CSCONFIG_COL_BIT_10) - /* 0x80010102 */ -#define CONFIG_SYS_DDR_TIMING_3 0 -#define CONFIG_SYS_DDR_TIMING_0 ((0 << TIMING_CFG0_RWT_SHIFT) \ - | (0 << TIMING_CFG0_WRT_SHIFT) \ - | (0 << TIMING_CFG0_RRT_SHIFT) \ - | (0 << TIMING_CFG0_WWT_SHIFT) \ - | (2 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) \ - | (6 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) \ - | (8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) \ - | (2 << TIMING_CFG0_MRS_CYC_SHIFT)) - /* 0x00260802 */ -#define CONFIG_SYS_DDR_TIMING_1 ((2 << TIMING_CFG1_PRETOACT_SHIFT) \ - | (6 << TIMING_CFG1_ACTTOPRE_SHIFT) \ - | (2 << TIMING_CFG1_ACTTORW_SHIFT) \ - | (7 << TIMING_CFG1_CASLAT_SHIFT) \ - | (9 << TIMING_CFG1_REFREC_SHIFT) \ - | (2 << TIMING_CFG1_WRREC_SHIFT) \ - | (2 << TIMING_CFG1_ACTTOACT_SHIFT) \ - | (2 << TIMING_CFG1_WRTORD_SHIFT)) - /* 0x26279222 */ -#define CONFIG_SYS_DDR_TIMING_2 ((0 << TIMING_CFG2_ADD_LAT_SHIFT) \ - | (4 << TIMING_CFG2_CPO_SHIFT) \ - | (3 << TIMING_CFG2_WR_LAT_DELAY_SHIFT) \ - | (2 << TIMING_CFG2_RD_TO_PRE_SHIFT) \ - | (2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT) \ - | (3 << TIMING_CFG2_CKE_PLS_SHIFT) \ - | (5 << TIMING_CFG2_FOUR_ACT_SHIFT)) - /* 0x021848c5 */ -#define CONFIG_SYS_DDR_INTERVAL ((0x0824 << SDRAM_INTERVAL_REFINT_SHIFT) \ - | (0x0100 << SDRAM_INTERVAL_BSTOPRE_SHIFT)) - /* 0x08240100 */ -#define CONFIG_SYS_DDR_SDRAM_CFG (SDRAM_CFG_SREN \ - | SDRAM_CFG_SDRAM_TYPE_DDR2 \ - | SDRAM_CFG_DBW_16) - /* 0x43100000 */ - -#define CONFIG_SYS_DDR_SDRAM_CFG2 0x00401000 /* 1 posted refresh */ -#define CONFIG_SYS_DDR_MODE ((0x0440 << SDRAM_MODE_ESD_SHIFT) \ - | (0x0242 << SDRAM_MODE_SD_SHIFT)) - /* ODT 150ohm CL=4, AL=0 on SDRAM */ -#define CONFIG_SYS_DDR_MODE2 0x00000000 - -/* - * Memory test - */ - -/* - * The reserved memory - */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ - -#define CONFIG_SYS_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Mon */ -#define CONFIG_SYS_MALLOC_LEN (512 * 1024) /* Reserved for malloc */ - -/* - * Initial RAM Base Address Setup - */ -#define CONFIG_SYS_INIT_RAM_LOCK 1 -#define CONFIG_SYS_INIT_RAM_ADDR 0xE6000000 /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - -/* - * FLASH on the Local Bus - */ -#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT -#define CONFIG_FLASH_CFI_LEGACY -#define CONFIG_SYS_FLASH_LEGACY_512Kx16 - -#define CONFIG_SYS_FLASH_BASE 0xFE000000 /* FLASH base address */ -#define CONFIG_SYS_FLASH_SIZE 8 /* FLASH size is up to 8M */ - - -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 135 - -#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ - -#define CONFIG_SYS_FPGA_DONE(k) 0x0010 - -#define CONFIG_SYS_FPGA_COUNT 1 - -#define CONFIG_SYS_MCLINK_MAX 3 - -#define CONFIG_SYS_FPGA_PTR \ - { (struct ihs_fpga *)CONFIG_SYS_FPGA0_BASE, NULL, NULL, NULL } - -#define CONFIG_SYS_FPGA_NO_RFL_HI - -/* - * Serial Port - */ -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE 1 -#define CONFIG_SYS_NS16550_CLK get_bus_freq(0) - -#define CONFIG_SYS_BAUDRATE_TABLE \ - {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} - -#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR + 0x4500) -#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR + 0x4600) - -/* Pass open firmware flat tree */ - -/* I2C */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_FSL -#define CONFIG_SYS_FSL_I2C_SPEED 400000 -#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 - -#define CONFIG_PCA953X /* NXP PCA9554 */ -#define CONFIG_SYS_I2C_PCA953X_WIDTH { {0x24, 16}, {0x25, 16}, {0x26, 16}, \ - {0x3c, 8}, {0x3d, 8}, {0x3e, 8} } - -#define CONFIG_PCA9698 /* NXP PCA9698 */ - -#define CONFIG_SYS_I2C_IHS -#define CONFIG_SYS_I2C_IHS_CH0 -#define CONFIG_SYS_I2C_IHS_SPEED_0 50000 -#define CONFIG_SYS_I2C_IHS_SLAVE_0 0x7F -#define CONFIG_SYS_I2C_IHS_CH1 -#define CONFIG_SYS_I2C_IHS_SPEED_1 50000 -#define CONFIG_SYS_I2C_IHS_SLAVE_1 0x7F -#define CONFIG_SYS_I2C_IHS_CH2 -#define CONFIG_SYS_I2C_IHS_SPEED_2 50000 -#define CONFIG_SYS_I2C_IHS_SLAVE_2 0x7F -#define CONFIG_SYS_I2C_IHS_CH3 -#define CONFIG_SYS_I2C_IHS_SPEED_3 50000 -#define CONFIG_SYS_I2C_IHS_SLAVE_3 0x7F - -#ifdef CONFIG_STRIDER_CON_DP -#define CONFIG_SYS_I2C_IHS_DUAL -#define CONFIG_SYS_I2C_IHS_CH0_1 -#define CONFIG_SYS_I2C_IHS_SPEED_0_1 50000 -#define CONFIG_SYS_I2C_IHS_SLAVE_0_1 0x7F -#define CONFIG_SYS_I2C_IHS_CH1_1 -#define CONFIG_SYS_I2C_IHS_SPEED_1_1 50000 -#define CONFIG_SYS_I2C_IHS_SLAVE_1_1 0x7F -#define CONFIG_SYS_I2C_IHS_CH2_1 -#define CONFIG_SYS_I2C_IHS_SPEED_2_1 50000 -#define CONFIG_SYS_I2C_IHS_SLAVE_2_1 0x7F -#define CONFIG_SYS_I2C_IHS_CH3_1 -#define CONFIG_SYS_I2C_IHS_SPEED_3_1 50000 -#define CONFIG_SYS_I2C_IHS_SLAVE_3_1 0x7F -#endif - -/* - * Software (bit-bang) I2C driver configuration - */ -#define CONFIG_SYS_I2C_SOFT -#define CONFIG_SOFT_I2C_READ_REPEATED_START -#define CONFIG_SYS_I2C_SOFT_SPEED 50000 -#define CONFIG_SYS_I2C_SOFT_SLAVE 0x7F -#define I2C_SOFT_DECLARATIONS2 -#define CONFIG_SYS_I2C_SOFT_SPEED_2 50000 -#define CONFIG_SYS_I2C_SOFT_SLAVE_2 0x7F -#define I2C_SOFT_DECLARATIONS3 -#define CONFIG_SYS_I2C_SOFT_SPEED_3 50000 -#define CONFIG_SYS_I2C_SOFT_SLAVE_3 0x7F -#define I2C_SOFT_DECLARATIONS4 -#define CONFIG_SYS_I2C_SOFT_SPEED_4 50000 -#define CONFIG_SYS_I2C_SOFT_SLAVE_4 0x7F -#if defined(CONFIG_STRIDER_CON) || defined(CONFIG_STRIDER_CON_DP) -#define I2C_SOFT_DECLARATIONS5 -#define CONFIG_SYS_I2C_SOFT_SPEED_5 50000 -#define CONFIG_SYS_I2C_SOFT_SLAVE_5 0x7F -#define I2C_SOFT_DECLARATIONS6 -#define CONFIG_SYS_I2C_SOFT_SPEED_6 50000 -#define CONFIG_SYS_I2C_SOFT_SLAVE_6 0x7F -#define I2C_SOFT_DECLARATIONS7 -#define CONFIG_SYS_I2C_SOFT_SPEED_7 50000 -#define CONFIG_SYS_I2C_SOFT_SLAVE_7 0x7F -#define I2C_SOFT_DECLARATIONS8 -#define CONFIG_SYS_I2C_SOFT_SPEED_8 50000 -#define CONFIG_SYS_I2C_SOFT_SLAVE_8 0x7F -#endif -#ifdef CONFIG_STRIDER_CON_DP -#define I2C_SOFT_DECLARATIONS9 -#define CONFIG_SYS_I2C_SOFT_SPEED_9 50000 -#define CONFIG_SYS_I2C_SOFT_SLAVE_9 0x7F -#define I2C_SOFT_DECLARATIONS10 -#define CONFIG_SYS_I2C_SOFT_SPEED_10 50000 -#define CONFIG_SYS_I2C_SOFT_SLAVE_10 0x7F -#define I2C_SOFT_DECLARATIONS11 -#define CONFIG_SYS_I2C_SOFT_SPEED_11 50000 -#define CONFIG_SYS_I2C_SOFT_SLAVE_11 0x7F -#define I2C_SOFT_DECLARATIONS12 -#define CONFIG_SYS_I2C_SOFT_SPEED_12 50000 -#define CONFIG_SYS_I2C_SOFT_SLAVE_12 0x7F -#endif - -#ifdef CONFIG_STRIDER_CON -#define CONFIG_SYS_ICS8N3QV01_I2C {5, 6, 7, 8} -#define CONFIG_SYS_CH7301_I2C {5, 6, 7, 8} -#define CONFIG_SYS_ADV7611_I2C {5, 6, 7, 8} -#define CONFIG_SYS_DP501_I2C {1, 2, 3, 4} -#define CONFIG_STRIDER_FANS { {10, 0x4c}, {11, 0x4c}, \ - {12, 0x4c} } -#elif defined(CONFIG_STRIDER_CON_DP) -#define CONFIG_SYS_ICS8N3QV01_I2C {13, 14, 15, 16, 17, 18, 19, 20} -#define CONFIG_SYS_CH7301_I2C {1, 3, 5, 7} -#define CONFIG_SYS_ADV7611_I2C {1, 3, 5, 7} -#define CONFIG_SYS_DP501_I2C {1, 3, 5, 7, 2, 4, 6, 8} -#define CONFIG_STRIDER_FANS { {10, 0x4c}, {11, 0x4c}, \ - {12, 0x4c} } -#elif defined(CONFIG_STRIDER_CPU_DP) -#define CONFIG_SYS_CH7301_I2C {1, 2, 3, 4} -#define CONFIG_SYS_ADV7611_I2C {1, 2, 3, 4} -#define CONFIG_SYS_DP501_I2C {1, 2, 3, 4} -#define CONFIG_STRIDER_FANS { {6, 0x4c}, {7, 0x4c}, \ - {8, 0x4c} } -#else -#define CONFIG_SYS_CH7301_I2C {1, 2, 3, 4} -#define CONFIG_SYS_ADV7611_I2C {1, 2, 3, 4} -#define CONFIG_SYS_DP501_I2C {1, 2, 3, 4} -#define CONFIG_STRIDER_FANS { {2, 0x18}, {3, 0x18}, \ - {4, 0x18} } -#endif - -#ifndef __ASSEMBLY__ -void fpga_gpio_set(unsigned int bus, int pin); -void fpga_gpio_clear(unsigned int bus, int pin); -int fpga_gpio_get(unsigned int bus, int pin); -void fpga_control_set(unsigned int bus, int pin); -void fpga_control_clear(unsigned int bus, int pin); -#endif - -#ifdef CONFIG_STRIDER_CON -#define I2C_SDA_GPIO ((I2C_ADAP_HWNR > 3) ? 0x0200 : 0x0040) -#define I2C_SCL_GPIO ((I2C_ADAP_HWNR > 3) ? 0x0100 : 0x0020) -#define I2C_FPGA_IDX ((I2C_ADAP_HWNR > 3) ? \ - (I2C_ADAP_HWNR - 4) : I2C_ADAP_HWNR) -#elif defined(CONFIG_STRIDER_CON_DP) -#define I2C_SDA_GPIO ((I2C_ADAP_HWNR > 3) ? 0x0040 : 0x0200) -#define I2C_SCL_GPIO ((I2C_ADAP_HWNR > 3) ? 0x0020 : 0x0100) -#define I2C_FPGA_IDX (I2C_ADAP_HWNR % 4) -#else -#define I2C_SDA_GPIO 0x0040 -#define I2C_SCL_GPIO 0x0020 -#define I2C_FPGA_IDX I2C_ADAP_HWNR -#endif - -#ifdef CONFIG_STRIDER_CON_DP -#define I2C_ACTIVE \ - do { \ - if (I2C_ADAP_HWNR > 7) \ - fpga_control_set(I2C_FPGA_IDX, 0x0004); \ - else \ - fpga_control_clear(I2C_FPGA_IDX, 0x0004); \ - } while (0) -#else -#define I2C_ACTIVE { } -#endif - -#define I2C_TRISTATE { } -#define I2C_READ \ - (fpga_gpio_get(I2C_FPGA_IDX, I2C_SDA_GPIO) ? 1 : 0) -#define I2C_SDA(bit) \ - do { \ - if (bit) \ - fpga_gpio_set(I2C_FPGA_IDX, I2C_SDA_GPIO); \ - else \ - fpga_gpio_clear(I2C_FPGA_IDX, I2C_SDA_GPIO); \ - } while (0) -#define I2C_SCL(bit) \ - do { \ - if (bit) \ - fpga_gpio_set(I2C_FPGA_IDX, I2C_SCL_GPIO); \ - else \ - fpga_gpio_clear(I2C_FPGA_IDX, I2C_SCL_GPIO); \ - } while (0) -#define I2C_DELAY udelay(25) /* 1/4 I2C clock duration */ - -/* - * Software (bit-bang) MII driver configuration - */ -#define CONFIG_BITBANGMII_MULTI - -/* - * OSD Setup - */ -#define CONFIG_SYS_OSD_SCREENS 1 -#define CONFIG_SYS_DP501_DIFFERENTIAL -#define CONFIG_SYS_DP501_VCAPCTRL0 0x01 /* DDR mode 0, DE for H/VSYNC */ - -#ifdef CONFIG_STRIDER_CON_DP -#define CONFIG_SYS_OSD_DH -#endif - -/* - * General PCI - * Addresses are mapped 1-1. - */ -#define CONFIG_SYS_PCIE1_BASE 0xA0000000 -#define CONFIG_SYS_PCIE1_MEM_BASE 0xA0000000 -#define CONFIG_SYS_PCIE1_MEM_PHYS 0xA0000000 -#define CONFIG_SYS_PCIE1_MEM_SIZE 0x10000000 -#define CONFIG_SYS_PCIE1_CFG_BASE 0xB0000000 -#define CONFIG_SYS_PCIE1_CFG_SIZE 0x01000000 -#define CONFIG_SYS_PCIE1_IO_BASE 0x00000000 -#define CONFIG_SYS_PCIE1_IO_PHYS 0xB1000000 -#define CONFIG_SYS_PCIE1_IO_SIZE 0x00800000 - -/* enable PCIE clock */ -#define CONFIG_SYS_SCCR_PCIEXP1CM 1 - -#define CONFIG_PCI_INDIRECT_BRIDGE -#define CONFIG_PCIE - -#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1957 /* Freescale */ -#define CONFIG_83XX_GENERIC_PCIE_REGISTER_HOSES 1 - -/* - * TSEC - */ -#define CONFIG_SYS_TSEC1_OFFSET 0x24000 -#define CONFIG_SYS_TSEC1 (CONFIG_SYS_IMMR+CONFIG_SYS_TSEC1_OFFSET) - -/* - * TSEC ethernet configuration - */ -#define CONFIG_TSEC1 -#define CONFIG_TSEC1_NAME "eTSEC0" -#define TSEC1_PHY_ADDR 1 -#define TSEC1_PHYIDX 0 -#define TSEC1_FLAGS 0 - -/* Options are: eTSEC[0-1] */ -#define CONFIG_ETHPRIME "eTSEC0" - -/* - * Environment - */ - -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ - -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ - -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - -/* - * For booting Linux, the board info and command line data - * have to be in the first 256 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (256 << 20) /* Initial Memory map for Linux */ - -/* - * Environment Configuration - */ - -#if defined(CONFIG_TSEC_ENET) -#define CONFIG_HAS_ETH0 -#endif - -#define CONFIG_LOADADDR 800000 /* default location for tftp and bootm */ - - -#define CONFIG_HOSTNAME "hrcon" -#define CONFIG_ROOTPATH "/opt/nfsroot" -#define CONFIG_BOOTFILE "uImage" - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "consoledev=ttyS1\0" \ - "u-boot=u-boot.bin\0" \ - "kernel_addr=1000000\0" \ - "fdt_addr=C00000\0" \ - "fdtfile=hrcon.dtb\0" \ - "load=tftp ${loadaddr} ${u-boot}\0" \ - "update=protect off " __stringify(CONFIG_SYS_MONITOR_BASE) \ - " +${filesize};era " __stringify(CONFIG_SYS_MONITOR_BASE)\ - " +${filesize};cp.b ${fileaddr} " \ - __stringify(CONFIG_SYS_MONITOR_BASE) " ${filesize}\0" \ - "upd=run load update\0" \ - -#define CONFIG_NFSBOOTCOMMAND \ - "setenv bootargs root=/dev/nfs rw " \ - "nfsroot=$serverip:$rootpath " \ - "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp ${kernel_addr} $bootfile;" \ - "tftp ${fdt_addr} $fdtfile;" \ - "bootm ${kernel_addr} - ${fdt_addr}" - -#define CONFIG_MMCBOOTCOMMAND \ - "setenv bootargs root=/dev/mmcblk0p3 rw rootwait " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "ext2load mmc 0:2 ${kernel_addr} $bootfile;" \ - "ext2load mmc 0:2 ${fdt_addr} $fdtfile;" \ - "bootm ${kernel_addr} - ${fdt_addr}" - -#define CONFIG_BOOTCOMMAND CONFIG_MMCBOOTCOMMAND - -#endif /* __CONFIG_H */ diff --git a/include/gdsys_fpga.h b/include/gdsys_fpga.h index 6d38a83d90..1fd646cab1 100644 --- a/include/gdsys_fpga.h +++ b/include/gdsys_fpga.h @@ -88,7 +88,7 @@ struct ihs_fpga { }; #endif -#if defined(CONFIG_TARGET_HRCON) || defined(CONFIG_STRIDER_CON_DP) +#if defined(CONFIG_TARGET_HRCON) struct ihs_fpga { u16 reflection_low; /* 0x0000 */ u16 versions; /* 0x0002 */ @@ -134,67 +134,4 @@ struct ihs_fpga { }; #endif -#ifdef CONFIG_STRIDER_CPU -struct ihs_fpga { - u16 reflection_low; /* 0x0000 */ - u16 versions; /* 0x0002 */ - u16 fpga_version; /* 0x0004 */ - u16 fpga_features; /* 0x0006 */ - u16 reserved_0[1]; /* 0x0008 */ - u16 top_interrupt; /* 0x000a */ - u16 reserved_1[3]; /* 0x000c */ - u16 extended_control; /* 0x0012 */ - struct ihs_gpio gpio; /* 0x0014 */ - u16 mpc3w_control; /* 0x001a */ - u16 reserved_2[2]; /* 0x001c */ - struct ihs_io_ep ep; /* 0x0020 */ - u16 reserved_3[9]; /* 0x002e */ - u16 mc_int; /* 0x0040 */ - u16 mc_int_en; /* 0x0042 */ - u16 mc_status; /* 0x0044 */ - u16 mc_control; /* 0x0046 */ - u16 mc_tx_data; /* 0x0048 */ - u16 mc_tx_address; /* 0x004a */ - u16 mc_tx_cmd; /* 0x004c */ - u16 mc_res; /* 0x004e */ - u16 mc_rx_cmd_status; /* 0x0050 */ - u16 mc_rx_data; /* 0x0052 */ - u16 reserved_4[62]; /* 0x0054 */ - struct ihs_i2c i2c0; /* 0x00d0 */ -}; -#endif - -#ifdef CONFIG_STRIDER_CON -struct ihs_fpga { - u16 reflection_low; /* 0x0000 */ - u16 versions; /* 0x0002 */ - u16 fpga_version; /* 0x0004 */ - u16 fpga_features; /* 0x0006 */ - u16 reserved_0[1]; /* 0x0008 */ - u16 top_interrupt; /* 0x000a */ - u16 reserved_1[4]; /* 0x000c */ - struct ihs_gpio gpio; /* 0x0014 */ - u16 mpc3w_control; /* 0x001a */ - u16 reserved_2[2]; /* 0x001c */ - struct ihs_io_ep ep; /* 0x0020 */ - u16 reserved_3[9]; /* 0x002e */ - struct ihs_i2c i2c0; /* 0x0040 */ - u16 reserved_4[10]; /* 0x004c */ - u16 mc_int; /* 0x0060 */ - u16 mc_int_en; /* 0x0062 */ - u16 mc_status; /* 0x0064 */ - u16 mc_control; /* 0x0066 */ - u16 mc_tx_data; /* 0x0068 */ - u16 mc_tx_address; /* 0x006a */ - u16 mc_tx_cmd; /* 0x006c */ - u16 mc_res; /* 0x006e */ - u16 mc_rx_cmd_status; /* 0x0070 */ - u16 mc_rx_data; /* 0x0072 */ - u16 reserved_5[70]; /* 0x0074 */ - struct ihs_osd osd0; /* 0x0100 */ - u16 reserved_6[889]; /* 0x010e */ - u16 videomem0[2048]; /* 0x0800 */ -}; -#endif - #endif