From: Vasily Khoruzhick <anarsoul@gmail.com>
Date: Wed, 17 Oct 2018 04:56:34 +0000 (-0700)
Subject: pwm: sunxi: use new prescaler when configuring PWM
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=ce138cb4294b85975b0c3ac8cf9e15a181462c25;p=u-boot.git

pwm: sunxi: use new prescaler when configuring PWM

Looks like old prescaler was used when configuring PWM, fix it.

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Reviewed-by: Jagan Teki <jagan@openedev.com>
---

diff --git a/drivers/pwm/sunxi_pwm.c b/drivers/pwm/sunxi_pwm.c
index baee503730..6284409b4f 100644
--- a/drivers/pwm/sunxi_pwm.c
+++ b/drivers/pwm/sunxi_pwm.c
@@ -97,7 +97,7 @@ static int sunxi_pwm_set_config(struct udevice *dev, uint channel,
 		v &= ~SUNXI_PWM_CTRL_CLK_GATE;
 		writel(v, &regs->ctrl);
 		v &= ~SUNXI_PWM_CTRL_PRESCALE0_MASK;
-		v |= (priv->prescaler & SUNXI_PWM_CTRL_PRESCALE0_MASK);
+		v |= (prescaler & SUNXI_PWM_CTRL_PRESCALE0_MASK);
 		writel(v, &regs->ctrl);
 		v |= SUNXI_PWM_CTRL_CLK_GATE;
 		writel(v, &regs->ctrl);