From: Mike Frysinger Date: Tue, 26 May 2009 02:42:28 +0000 (-0400) Subject: mtd: nand: new base driver for memory mapped nand devices X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=cd84423a09f3a08029fe41c1db96168debd0b51f;p=u-boot.git mtd: nand: new base driver for memory mapped nand devices The BF537-STAMP Blackfin board had a driver for working with NAND devices that are simply memory mapped. Since there is nothing Blackfin specific about this, generalize the driver a bit so that everyone can leverage it. Signed-off-by: Mike Frysinger Signed-off-by: Scott Wood --- diff --git a/board/bf537-stamp/Makefile b/board/bf537-stamp/Makefile index 4c9e015a13..f728e2c0da 100644 --- a/board/bf537-stamp/Makefile +++ b/board/bf537-stamp/Makefile @@ -32,7 +32,6 @@ LIB = $(obj)lib$(BOARD).a COBJS-y := $(BOARD).o cmd_bf537led.o COBJS-$(CONFIG_BFIN_IDE) += ide-cf.o COBJS-$(CONFIG_CMD_EEPROM) += spi_flash.o -COBJS-$(CONFIG_CMD_NAND) += nand.o COBJS-$(CONFIG_POST) += post.o post-memory.o SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c) diff --git a/board/bf537-stamp/nand.c b/board/bf537-stamp/nand.c deleted file mode 100644 index 181e83d6a1..0000000000 --- a/board/bf537-stamp/nand.c +++ /dev/null @@ -1,100 +0,0 @@ -/* - * Copyright (c) 2006-2007 Analog Devices Inc. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include - -#include - -#define CONCAT(a,b,c,d) a ## b ## c ## d -#define PORT(a,b) CONCAT(pPORT,a,b,) - -#ifndef CONFIG_NAND_GPIO_PORT -#define CONFIG_NAND_GPIO_PORT F -#endif - -/* - * hardware specific access to control-lines - */ -static void bfin_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl) -{ - register struct nand_chip *this = mtd->priv; - u32 IO_ADDR_W = (u32) this->IO_ADDR_W; - - if (ctrl & NAND_CTRL_CHANGE) { - if (ctrl & NAND_CLE) - IO_ADDR_W = CONFIG_SYS_NAND_BASE + BFIN_NAND_CLE; - else - IO_ADDR_W = CONFIG_SYS_NAND_BASE; - if (ctrl & NAND_ALE) - IO_ADDR_W = CONFIG_SYS_NAND_BASE + BFIN_NAND_ALE; - else - IO_ADDR_W = CONFIG_SYS_NAND_BASE; - this->IO_ADDR_W = (void __iomem *) IO_ADDR_W; - } - this->IO_ADDR_R = this->IO_ADDR_W; - - /* Drain the writebuffer */ - SSYNC(); - - if (cmd != NAND_CMD_NONE) - writeb(cmd, this->IO_ADDR_W); -} - -int bfin_device_ready(struct mtd_info *mtd) -{ - int ret = (*PORT(CONFIG_NAND_GPIO_PORT, IO) & BFIN_NAND_READY) ? 1 : 0; - SSYNC(); - return ret; -} - -/* - * Board-specific NAND initialization. The following members of the - * argument are board-specific (per include/linux/mtd/nand.h): - * - IO_ADDR_R?: address to read the 8 I/O lines of the flash device - * - IO_ADDR_W?: address to write the 8 I/O lines of the flash device - * - cmd_ctrl: hardwarespecific function for accesing control-lines - * - dev_ready: hardwarespecific function for accesing device ready/busy line - * - enable_hwecc?: function to enable (reset) hardware ecc generator. Must - * only be provided if a hardware ECC is available - * - ecc.mode: mode of ecc, see defines - * - chip_delay: chip dependent delay for transfering data from array to - * read regs (tR) - * - options: various chip options. They can partly be set to inform - * nand_scan about special functionality. See the defines for further - * explanation - * Members with a "?" were not set in the merged testing-NAND branch, - * so they are not set here either. - */ -int board_nand_init(struct nand_chip *nand) -{ - *PORT(CONFIG_NAND_GPIO_PORT, _FER) &= ~BFIN_NAND_READY; - *PORT(CONFIG_NAND_GPIO_PORT, IO_DIR) &= ~BFIN_NAND_READY; - *PORT(CONFIG_NAND_GPIO_PORT, IO_INEN) |= BFIN_NAND_READY; - - nand->cmd_ctrl = bfin_hwcontrol; - nand->ecc.mode = NAND_ECC_SOFT; - nand->dev_ready = bfin_device_ready; - nand->chip_delay = 30; - - return 0; -} diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile index 71dd5b9b85..fea58f4f25 100644 --- a/drivers/mtd/nand/Makefile +++ b/drivers/mtd/nand/Makefile @@ -45,6 +45,7 @@ COBJS-$(CONFIG_NAND_NOMADIK) += nomadik.o COBJS-$(CONFIG_NAND_S3C2410) += s3c2410_nand.c COBJS-$(CONFIG_NAND_S3C64XX) += s3c64xx.o COBJS-$(CONFIG_NAND_OMAP_GPMC) += omap_gpmc.o +COBJS-$(CONFIG_NAND_PLAT) += nand_plat.o endif COBJS := $(COBJS-y) diff --git a/drivers/mtd/nand/nand_plat.c b/drivers/mtd/nand/nand_plat.c new file mode 100644 index 0000000000..b35492b9fc --- /dev/null +++ b/drivers/mtd/nand/nand_plat.c @@ -0,0 +1,53 @@ +/* + * Genericish driver for memory mapped NAND devices + * + * Copyright (c) 2006-2009 Analog Devices Inc. + * Licensed under the GPL-2 or later. + */ + +/* Your board must implement the following macros: + * NAND_PLAT_WRITE_CMD(chip, cmd) + * NAND_PLAT_WRITE_ADR(chip, cmd) + * NAND_PLAT_INIT() + * + * It may also implement the following: + * NAND_PLAT_DEV_READY(chip) + */ + +#include +#include + +#include + +static void plat_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl) +{ + struct nand_chip *this = mtd->priv; + + if (cmd == NAND_CMD_NONE) + return; + + if (ctrl & NAND_CLE) + NAND_PLAT_WRITE_CMD(this, cmd); + else + NAND_PLAT_WRITE_ADR(this, cmd); +} + +#ifdef NAND_PLAT_DEV_READY +static int plat_dev_ready(struct mtd_info *mtd) +{ + return NAND_PLAT_DEV_READY((struct nand_chip *)mtd->priv); +} +#else +# define plat_dev_ready NULL +#endif + +int board_nand_init(struct nand_chip *nand) +{ + NAND_PLAT_INIT(); + + nand->cmd_ctrl = plat_cmd_ctrl; + nand->dev_ready = plat_dev_ready; + nand->ecc.mode = NAND_ECC_SOFT; + + return 0; +} diff --git a/include/configs/bf537-stamp.h b/include/configs/bf537-stamp.h index 0a86e83fbf..98300db7b5 100644 --- a/include/configs/bf537-stamp.h +++ b/include/configs/bf537-stamp.h @@ -151,36 +151,28 @@ /* * NAND Settings */ -/* #define CONFIG_BF537_NAND */ -#ifdef CONFIG_BF537_NAND -# define CONFIG_CMD_NAND -#endif - -#define CONFIG_SYS_NAND_ADDR 0x20212000 -#define CONFIG_SYS_NAND_BASE CONFIG_SYS_NAND_ADDR +/* #define CONFIG_NAND_PLAT */ +#define CONFIG_SYS_NAND_BASE 0x20212000 #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define SECTORSIZE 512 -#define ADDR_COLUMN 1 -#define ADDR_PAGE 2 -#define ADDR_COLUMN_PAGE 3 -#define NAND_ChipID_UNKNOWN 0x00 -#define NAND_MAX_FLOORS 1 -#define BFIN_NAND_READY PF3 - -#define NAND_WAIT_READY(nand) \ + +#define BFIN_NAND_CLE(chip) ((unsigned long)(chip)->IO_ADDR_W | (1 << 2)) +#define BFIN_NAND_ALE(chip) ((unsigned long)(chip)->IO_ADDR_W | (1 << 1)) +#define BFIN_NAND_READY PF3 +#define BFIN_NAND_WRITE(addr, cmd) \ do { \ - int timeout = 0; \ - while (!(*pPORTFIO & PF3)) \ - if (timeout++ > 100000) \ - break; \ + bfin_write8(addr, cmd); \ + SSYNC(); \ } while (0) -#define BFIN_NAND_CLE (1 << 2) /* A2 -> Command Enable */ -#define BFIN_NAND_ALE (1 << 1) /* A1 -> Address Enable */ -#define WRITE_NAND_COMMAND(d, adr) bfin_write8(adr | BFIN_NAND_CLE, d) -#define WRITE_NAND_ADDRESS(d, adr) bfin_write8(adr | BFIN_NAND_ALE, d) -#define WRITE_NAND(d, adr) bfin_write8(adr, d) -#define READ_NAND(adr) bfin_read8(adr) +#define NAND_PLAT_WRITE_CMD(chip, cmd) BFIN_NAND_WRITE(BFIN_NAND_CLE(chip), cmd) +#define NAND_PLAT_WRITE_ADR(chip, cmd) BFIN_NAND_WRITE(BFIN_NAND_ALE(chip), cmd) +#define NAND_PLAT_DEV_READY(chip) (bfin_read_PORTFIO() & BFIN_NAND_READY) +#define NAND_PLAT_INIT() \ + do { \ + bfin_write_PORTF_FER(bfin_read_PORTF_FER() & ~BFIN_NAND_READY); \ + bfin_write_PORTFIO_DIR(bfin_read_PORTFIO_DIR() & ~BFIN_NAND_READY); \ + bfin_write_PORTFIO_INEN(bfin_read_PORTFIO_INEN() | BFIN_NAND_READY); \ + } while (0) /* diff --git a/include/configs/bfin_adi_common.h b/include/configs/bfin_adi_common.h index 4149a29471..1ca2e51420 100644 --- a/include/configs/bfin_adi_common.h +++ b/include/configs/bfin_adi_common.h @@ -38,6 +38,9 @@ # define CONFIG_CMD_USB_STORAGE # define CONFIG_DOS_PARTITION # endif +# ifdef CONFIG_NAND_PLAT +# define CONFIG_CMD_NAND +# endif # ifdef CONFIG_POST # define CONFIG_CMD_DIAG # endif