From: Aneesh V <aneesh@ti.com>
Date: Mon, 21 Nov 2011 23:39:00 +0000 (+0000)
Subject: omap4460: fix TPS initialization
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=cd5847ac3a2d561e9d02926c768fd547f418c24d;p=u-boot.git

omap4460: fix TPS initialization

TPS power IC is controlled using a GPIO (gpio_wk7).
This GPIO should be maintained at logic 1 always. As
such an internal pull-up on this pin will do the job,
driving the GPIO outuput is not needed. This will avoid
the need of using GPIO library in SPL and also may
save some power.

Signed-off-by: Aneesh V <aneesh@ti.com>
---

diff --git a/arch/arm/cpu/armv7/omap-common/clocks-common.c b/arch/arm/cpu/armv7/omap-common/clocks-common.c
index f64a10bfcb..1e7e20e249 100644
--- a/arch/arm/cpu/armv7/omap-common/clocks-common.c
+++ b/arch/arm/cpu/armv7/omap-common/clocks-common.c
@@ -359,14 +359,6 @@ void do_scale_tps62361(u32 reg, u32 volt_mv)
 	step = volt_mv - TPS62361_BASE_VOLT_MV;
 	step /= 10;
 
-	/*
-	 * Select SET1 in TPS62361:
-	 * VSEL1 is grounded on board. So the following selects
-	 * VSEL1 = 0 and VSEL0 = 1
-	 */
-	gpio_direction_output(TPS62361_VSEL0_GPIO, 0);
-	gpio_set_value(TPS62361_VSEL0_GPIO, 1);
-
 	temp = TPS62361_I2C_SLAVE_ADDR |
 	    (reg << PRM_VC_VAL_BYPASS_REGADDR_SHIFT) |
 	    (step << PRM_VC_VAL_BYPASS_DATA_SHIFT) |
diff --git a/board/ti/panda/panda_mux_data.h b/board/ti/panda/panda_mux_data.h
index c05170e336..2970ccd609 100644
--- a/board/ti/panda/panda_mux_data.h
+++ b/board/ti/panda/panda_mux_data.h
@@ -76,7 +76,7 @@ const struct pad_conf_entry wkup_padconf_array_essential[] = {
 
 const struct pad_conf_entry wkup_padconf_array_essential_4460[] = {
 
-{PAD1_FREF_CLK4_REQ, (M3)},	 /* gpio_wk7, TPS */
+{PAD1_FREF_CLK4_REQ, (PTU | M7)}, /* gpio_wk7 for TPS: safe mode + pull up */
 
 };
 
diff --git a/board/ti/sdp4430/sdp.c b/board/ti/sdp4430/sdp.c
index e1b853c4e9..9ae9e2c602 100644
--- a/board/ti/sdp4430/sdp.c
+++ b/board/ti/sdp4430/sdp.c
@@ -96,6 +96,13 @@ void set_muxconf_regs_non_essential(void)
 	do_set_mux(CONTROL_PADCONF_WKUP, wkup_padconf_array_non_essential,
 		   sizeof(wkup_padconf_array_non_essential) /
 		   sizeof(struct pad_conf_entry));
+
+	if (omap_revision() < OMAP4460_ES1_0) {
+		do_set_mux(CONTROL_PADCONF_WKUP,
+			wkup_padconf_array_non_essential_4430,
+			sizeof(wkup_padconf_array_non_essential_4430) /
+			sizeof(struct pad_conf_entry));
+	}
 }
 
 #if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_GENERIC_MMC)
diff --git a/board/ti/sdp4430/sdp4430_mux_data.h b/board/ti/sdp4430/sdp4430_mux_data.h
index 1c6e0eeb60..0a20968978 100644
--- a/board/ti/sdp4430/sdp4430_mux_data.h
+++ b/board/ti/sdp4430/sdp4430_mux_data.h
@@ -67,7 +67,7 @@ const struct pad_conf_entry wkup_padconf_array_essential[] = {
 
 const struct pad_conf_entry wkup_padconf_array_essential_4460[] = {
 
-{PAD1_FREF_CLK4_REQ, (M3)},	 /* gpio_wk7, TPS */
+{PAD1_FREF_CLK4_REQ, (PTU | M7)}, /* gpio_wk7 for TPS: safe mode + pull up */
 
 };
 
@@ -275,4 +275,8 @@ const struct pad_conf_entry wkup_padconf_array_non_essential[] = {
 	{PAD1_SYS_BOOT7, (IEN | M3)},		/* gpio_wk10 */
 };
 
+const struct pad_conf_entry wkup_padconf_array_non_essential_4430[] = {
+	{PAD1_FREF_CLK4_REQ, (M3)}	/* gpio_wk7 - Debug led-2 */
+};
+
 #endif /* _SDP4430_MUX_DATA_H */