From: Patrick Delaunay Date: Wed, 18 Mar 2020 08:22:51 +0000 (+0100) Subject: configs: stm32mp1: remove optee defconfig X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=ccf6e9ff95d6e5c7dd3dc30239cfdd74ffbb9e85;p=u-boot.git configs: stm32mp1: remove optee defconfig As the op-tee presence is detected by U-boot, the stm32mp15_optee_defconfig is identical to stm32mp15_trusted_defconfig and can be removed. Signed-off-by: Patrick Delaunay Reviewed-by: Patrice Chotard --- diff --git a/board/st/stm32mp1/MAINTAINERS b/board/st/stm32mp1/MAINTAINERS index 2930947716..96c4559033 100644 --- a/board/st/stm32mp1/MAINTAINERS +++ b/board/st/stm32mp1/MAINTAINERS @@ -6,6 +6,5 @@ S: Maintained F: arch/arm/dts/stm32mp15* F: board/st/stm32mp1/ F: configs/stm32mp15_basic_defconfig -F: configs/stm32mp15_optee_defconfig F: configs/stm32mp15_trusted_defconfig F: include/configs/stm32mp1.h diff --git a/configs/stm32mp15_optee_defconfig b/configs/stm32mp15_optee_defconfig deleted file mode 100644 index d540664315..0000000000 --- a/configs/stm32mp15_optee_defconfig +++ /dev/null @@ -1,137 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_STM32MP=y -CONFIG_TFABOOT=y -CONFIG_SYS_MALLOC_F_LEN=0x3000 -CONFIG_ENV_OFFSET=0x280000 -CONFIG_ENV_SECT_SIZE=0x40000 -CONFIG_TARGET_ST_STM32MP15x=y -CONFIG_ENV_OFFSET_REDUND=0x2C0000 -CONFIG_DISTRO_DEFAULTS=y -CONFIG_FIT=y -CONFIG_BOOTCOMMAND="run bootcmd_stm32mp" -CONFIG_SYS_PROMPT="STM32MP> " -# CONFIG_CMD_BOOTD is not set -# CONFIG_CMD_ELF is not set -# CONFIG_CMD_IMI is not set -# CONFIG_CMD_XIMG is not set -# CONFIG_CMD_EXPORTENV is not set -# CONFIG_CMD_IMPORTENV is not set -CONFIG_CMD_MEMINFO=y -CONFIG_CMD_MEMTEST=y -CONFIG_SYS_MEMTEST_START=0xc0000000 -CONFIG_SYS_MEMTEST_END=0xc4000000 -CONFIG_CMD_ADC=y -CONFIG_CMD_CLK=y -CONFIG_CMD_DFU=y -CONFIG_CMD_FUSE=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_GPT=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_MTD=y -CONFIG_CMD_REMOTEPROC=y -CONFIG_CMD_SPI=y -CONFIG_CMD_USB=y -CONFIG_CMD_USB_MASS_STORAGE=y -CONFIG_CMD_BMP=y -CONFIG_CMD_CACHE=y -CONFIG_CMD_TIME=y -CONFIG_CMD_TIMER=y -CONFIG_CMD_PMIC=y -CONFIG_CMD_REGULATOR=y -CONFIG_CMD_EXT4_WRITE=y -CONFIG_CMD_MTDPARTS=y -CONFIG_CMD_UBI=y -CONFIG_DEFAULT_DEVICE_TREE="stm32mp157c-ev1" -CONFIG_ENV_IS_NOWHERE=y -CONFIG_ENV_IS_IN_EXT4=y -CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_ENV_IS_IN_UBI=y -CONFIG_SYS_REDUNDAND_ENVIRONMENT=y -CONFIG_ENV_EXT4_INTERFACE="mmc" -CONFIG_ENV_EXT4_DEVICE_AND_PART="0:auto" -CONFIG_ENV_EXT4_FILE="/uboot.env" -CONFIG_ENV_UBI_PART="UBI" -CONFIG_ENV_UBI_VOLUME="uboot_config" -CONFIG_ENV_UBI_VOLUME_REDUND="uboot_config_r" -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_STM32_ADC=y -CONFIG_DFU_MMC=y -CONFIG_DFU_RAM=y -CONFIG_DFU_MTD=y -CONFIG_DFU_VIRT=y -CONFIG_SET_DFU_ALT_INFO=y -CONFIG_USB_FUNCTION_FASTBOOT=y -CONFIG_FASTBOOT_BUF_ADDR=0xC0000000 -CONFIG_FASTBOOT_BUF_SIZE=0x02000000 -CONFIG_FASTBOOT_USB_DEV=1 -CONFIG_FASTBOOT_FLASH=y -CONFIG_FASTBOOT_FLASH_MMC_DEV=1 -CONFIG_DM_HWSPINLOCK=y -CONFIG_HWSPINLOCK_STM32=y -CONFIG_DM_I2C=y -CONFIG_SYS_I2C_STM32F7=y -CONFIG_LED=y -CONFIG_LED_GPIO=y -CONFIG_DM_MAILBOX=y -CONFIG_STM32_IPCC=y -CONFIG_DM_MMC=y -CONFIG_SUPPORT_EMMC_BOOT=y -CONFIG_STM32_SDMMC2=y -CONFIG_MTD=y -CONFIG_DM_MTD=y -CONFIG_SYS_MTDPARTS_RUNTIME=y -CONFIG_MTD_RAW_NAND=y -CONFIG_NAND_STM32_FMC2=y -CONFIG_MTD_SPI_NAND=y -CONFIG_DM_SPI_FLASH=y -CONFIG_SPI_FLASH_MACRONIX=y -CONFIG_SPI_FLASH_SPANSION=y -CONFIG_SPI_FLASH_STMICRO=y -CONFIG_SPI_FLASH_WINBOND=y -# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set -CONFIG_SPI_FLASH_MTD=y -CONFIG_DM_ETH=y -CONFIG_DWC_ETH_QOS=y -CONFIG_PHY=y -CONFIG_PHY_STM32_USBPHYC=y -CONFIG_PINCONF=y -CONFIG_PINCTRL_STMFX=y -CONFIG_DM_PMIC=y -CONFIG_PMIC_STPMIC1=y -CONFIG_DM_REGULATOR_FIXED=y -CONFIG_DM_REGULATOR_GPIO=y -CONFIG_DM_REGULATOR_STM32_VREFBUF=y -CONFIG_DM_REGULATOR_STPMIC1=y -CONFIG_REMOTEPROC_STM32_COPRO=y -CONFIG_DM_RNG=y -CONFIG_RNG_STM32MP1=y -CONFIG_DM_RTC=y -CONFIG_RTC_STM32=y -CONFIG_SERIAL_RX_BUFFER=y -CONFIG_SPI=y -CONFIG_DM_SPI=y -CONFIG_STM32_QSPI=y -CONFIG_STM32_SPI=y -CONFIG_TEE=y -CONFIG_OPTEE=y -# CONFIG_OPTEE_TA_AVB is not set -CONFIG_USB=y -CONFIG_DM_USB=y -CONFIG_DM_USB_GADGET=y -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_EHCI_GENERIC=y -CONFIG_USB_GADGET=y -CONFIG_USB_GADGET_MANUFACTURER="STMicroelectronics" -CONFIG_USB_GADGET_VENDOR_NUM=0x0483 -CONFIG_USB_GADGET_PRODUCT_NUM=0x5720 -CONFIG_USB_GADGET_DWC2_OTG=y -CONFIG_DM_VIDEO=y -CONFIG_BACKLIGHT_GPIO=y -CONFIG_VIDEO_LCD_ORISETECH_OTM8009A=y -CONFIG_VIDEO_LCD_RAYDIUM_RM68200=y -CONFIG_VIDEO_STM32=y -CONFIG_VIDEO_STM32_DSI=y -CONFIG_VIDEO_STM32_MAX_XRES=1280 -CONFIG_VIDEO_STM32_MAX_YRES=800 -CONFIG_FDT_FIXUP_PARTITIONS=y diff --git a/doc/board/st/stm32mp1.rst b/doc/board/st/stm32mp1.rst index b3856be9a1..73d5ad60ca 100644 --- a/doc/board/st/stm32mp1.rst +++ b/doc/board/st/stm32mp1.rst @@ -80,32 +80,16 @@ defconfig_file : stm32mp15_trusted_defconfig + +-------------------------+------------+-------+ | |Trusted Firmware-A (TF-A)| U-Boot | Linux | +-------------+-------------------------+------------+-------+ - | TrustZone |TF-A secure monitor | + | TrustZone |secure monitor | +-------------+-------------------------+------------+-------+ TF-A performs a full initialization of Secure peripherals and installs a -secure monitor (BL32=SPMin). +secure monitor, BL32: -U-Boot is running in normal world and uses TF-A monitor to access -to secure resources. - -The **Trusted** boot chain with **OP-TEE** -`````````````````````````````````````````` - -defconfig_file : stm32mp15_optee_defconfig - - +-------------+-------------------------+------------+-------+ - | ROM code | FSBL | SSBL | OS | - + +-------------------------+------------+-------+ - | |Trusted Firmware-A (TF-A)| U-Boot | Linux | - +-------------+-------------------------+------------+-------+ - | TrustZone |OP-TEE | - +-------------+-------------------------+------------+-------+ - -TF-A performs a full initialization of Secure peripherals and installs OP-TEE -from specific partitions (teeh, teed, teex). + * SPMin provided by TF-A or + * OP-TEE from specific partitions (teeh, teed, teex). -U-Boot is running in normal world and uses OP-TEE monitor to access +U-Boot is running in normal world and uses the secure monitor to access to secure resources. The **Basic** boot chain @@ -180,7 +164,6 @@ Build Procedure for example: use one output directory for each configuration:: # export KBUILD_OUTPUT=stm32mp15_trusted - # export KBUILD_OUTPUT=stm32mp15_optee # export KBUILD_OUTPUT=stm32mp15_basic you can build outside of code directory:: @@ -194,7 +177,6 @@ Build Procedure with : - For **trusted** boot mode : **stm32mp15_trusted_defconfig** - - For **trusted** with OP-TEE boot mode : **stm32mp15_optee_defconfig** - For basic boot mode: stm32mp15_basic_defconfig 5. Configure the device-tree and build the U-Boot image:: @@ -211,8 +193,8 @@ Build Procedure b) trusted with OP-TEE boot on dk2:: - # export KBUILD_OUTPUT=stm32mp15_optee - # make stm32mp15_optee_defconfig + # export KBUILD_OUTPUT=stm32mp15_trusted + # make stm32mp15_trusted_defconfig # make DEVICE_TREE=stm32mp157c-dk2 all c) basic boot on ev1::