From: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Date: Tue, 15 Nov 2022 14:46:23 +0000 (+0100)
Subject: rockchip: puma-rk3399: sync DTS with Linux kernel next-20221114
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=ccaa55fb6e77ac1fa37e2e9451ecb4e5b60bf57a;p=u-boot.git

rockchip: puma-rk3399: sync DTS with Linux kernel next-20221114

This synchronizes the Device Trees related to Puma RK3399 SoM with Linux
kernel next-20221114 to include two important changes pertaining to
eMMC and SD card instability.

Cc: Quentin Schulz <foss+uboot@0leil.net>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
---

diff --git a/arch/arm/dts/rk3399-puma-haikou.dts b/arch/arm/dts/rk3399-puma-haikou.dts
index 292bb7e80c..115c14c0a3 100644
--- a/arch/arm/dts/rk3399-puma-haikou.dts
+++ b/arch/arm/dts/rk3399-puma-haikou.dts
@@ -49,7 +49,7 @@
 	sgtl5000_clk: sgtl5000-oscillator  {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
-			clock-frequency  = <24576000>;
+			clock-frequency = <24576000>;
 	};
 
 	dc_12v: dc-12v {
@@ -207,7 +207,7 @@
 	cap-sd-highspeed;
 	cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
 	disable-wp;
-	max-frequency = <150000000>;
+	max-frequency = <40000000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
 	vmmc-supply = <&vcc3v3_baseboard>;
@@ -232,6 +232,7 @@
 
 &usbdrd_dwc3_0 {
 	dr_mode = "otg";
+	extcon = <&extcon_usb3>;
 	status = "okay";
 };
 
diff --git a/arch/arm/dts/rk3399-puma.dtsi b/arch/arm/dts/rk3399-puma.dtsi
index fb67db4619..aa3e21bd6c 100644
--- a/arch/arm/dts/rk3399-puma.dtsi
+++ b/arch/arm/dts/rk3399-puma.dtsi
@@ -25,6 +25,13 @@
 		};
 	};
 
+	extcon_usb3: extcon-usb3 {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb3_id>;
+	};
+
 	clkin_gmac: external-gmac-clock {
 		compatible = "fixed-clock";
 		clock-frequency = <125000000>;
@@ -55,7 +62,6 @@
 	vcc5v0_host: vcc5v0-host-regulator {
 		compatible = "regulator-fixed";
 		gpio = <&gpio4 RK_PA3 GPIO_ACTIVE_LOW>;
-		enable-active-low;
 		pinctrl-names = "default";
 		pinctrl-0 = <&vcc5v0_host_en>;
 		regulator-name = "vcc5v0_host";
@@ -71,6 +77,17 @@
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
 	};
+
+	vdd_log: vdd-log {
+		compatible = "pwm-regulator";
+		pwms = <&pwm2 0 25000 1>;
+		pwm-supply = <&vcc5v0_sys>;
+		regulator-name = "vdd_log";
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1400000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
 };
 
 &cpu_b0 {
@@ -422,9 +439,22 @@
 			  <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
+
+	usb3 {
+		usb3_id: usb3-id {
+			rockchip,pins =
+			  <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
 };
 
 &sdhci {
+	/*
+	 * Signal integrity isn't great at 200MHz but 100MHz has proven stable
+	 * enough.
+	 */
+	max-frequency = <100000000>;
+
 	bus-width = <8>;
 	mmc-hs400-1_8v;
 	mmc-hs400-enhanced-strobe;