From: Masahiro Yamada Date: Mon, 15 Dec 2014 14:26:22 +0000 (+0900) Subject: mpc8260: remove VoVPN-GW board support X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=cc90905f784b82bc943629ea8f63a3c54b2cd854;p=u-boot.git mpc8260: remove VoVPN-GW board support This board is still a non-generic board. Signed-off-by: Masahiro Yamada --- diff --git a/arch/powerpc/cpu/mpc8260/Kconfig b/arch/powerpc/cpu/mpc8260/Kconfig index 10327121fc..15742d9b08 100644 --- a/arch/powerpc/cpu/mpc8260/Kconfig +++ b/arch/powerpc/cpu/mpc8260/Kconfig @@ -37,9 +37,6 @@ config TARGET_PM828 config TARGET_MPC8266ADS bool "Support MPC8266ADS" -config TARGET_VOVPN_GW - bool "Support VoVPN-GW" - config TARGET_KM82XX bool "Support km82xx" @@ -50,7 +47,6 @@ source "board/cpu86/Kconfig" source "board/cpu87/Kconfig" source "board/ep82xxm/Kconfig" source "board/freescale/mpc8266ads/Kconfig" -source "board/funkwerk/vovpn-gw/Kconfig" source "board/gw8260/Kconfig" source "board/iphase4539/Kconfig" source "board/keymile/km82xx/Kconfig" diff --git a/board/funkwerk/vovpn-gw/Kconfig b/board/funkwerk/vovpn-gw/Kconfig deleted file mode 100644 index 6b6c328f67..0000000000 --- a/board/funkwerk/vovpn-gw/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_VOVPN_GW - -config SYS_BOARD - default "vovpn-gw" - -config SYS_VENDOR - default "funkwerk" - -config SYS_CONFIG_NAME - default "VoVPN-GW" - -endif diff --git a/board/funkwerk/vovpn-gw/MAINTAINERS b/board/funkwerk/vovpn-gw/MAINTAINERS deleted file mode 100644 index 34d1cc12ff..0000000000 --- a/board/funkwerk/vovpn-gw/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -VOVPN-GW BOARD -#M: - -S: Maintained -F: board/funkwerk/vovpn-gw/ -F: include/configs/VoVPN-GW.h -F: configs/VoVPN-GW_66MHz_defconfig diff --git a/board/funkwerk/vovpn-gw/Makefile b/board/funkwerk/vovpn-gw/Makefile deleted file mode 100644 index 325324782d..0000000000 --- a/board/funkwerk/vovpn-gw/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# (C) Copyright 2001-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := vovpn-gw.o flash.o m88e6060.o diff --git a/board/funkwerk/vovpn-gw/flash.c b/board/funkwerk/vovpn-gw/flash.c deleted file mode 100644 index 829514c179..0000000000 --- a/board/funkwerk/vovpn-gw/flash.c +++ /dev/null @@ -1,436 +0,0 @@ -/* - * (C) Copyright 2004 - * Elmeg Communications Systems GmbH, Juergen Selent (j.selent@elmeg.de) - * - * Support for the Elmeg VoVPN Gateway Module - * ------------------------------------------ - * This is a signle bank flashdriver for INTEL 28F320J3, 28F640J3 - * and 28F128J3A flashs working in 8 Bit mode. - * - * Most of this code is taken from existing u-boot source code. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include - -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; - -#define FLASH_CMD_READ_ID 0x90 -#define FLASH_CMD_READ_STATUS 0x70 -#define FLASH_CMD_RESET 0xff -#define FLASH_CMD_BLOCK_ERASE 0x20 -#define FLASH_CMD_ERASE_CONFIRM 0xd0 -#define FLASH_CMD_CLEAR_STATUS 0x50 -#define FLASH_CMD_SUSPEND_ERASE 0xb0 -#define FLASH_CMD_WRITE 0x40 -#define FLASH_CMD_WRITE_BUFF 0xe8 -#define FLASH_CMD_PROG_RESUME 0xd0 -#define FLASH_CMD_PROTECT 0x60 -#define FLASH_CMD_PROTECT_SET 0x01 -#define FLASH_CMD_PROTECT_CLEAR 0xd0 -#define FLASH_STATUS_DONE 0x80 - -#define FLASH_WRITE_BUFFER_SIZE 32 - -#ifdef CONFIG_SYS_FLASH_16BIT -#define FLASH_WORD_SIZE unsigned short -#define FLASH_ID_MASK 0xffff -#define FLASH_CMD_ADDR_SHIFT 0 -#else -#define FLASH_WORD_SIZE unsigned char -#define FLASH_ID_MASK 0xff -/* A0 is not used in either 8x or 16x for READ ID */ -#define FLASH_CMD_ADDR_SHIFT 1 -#endif - - -static unsigned long -flash_get(volatile FLASH_WORD_SIZE *addr, flash_info_t *info) -{ - volatile FLASH_WORD_SIZE *p; - FLASH_WORD_SIZE value; - int i; - - addr[0] = FLASH_CMD_READ_ID; - - /* manufactor */ - value = addr[0 << FLASH_CMD_ADDR_SHIFT]; - switch (value) { - case (INTEL_MANUFACT & FLASH_ID_MASK): - info->flash_id = FLASH_MAN_INTEL; - break; - default: - info->flash_id = FLASH_UNKNOWN; - info->sector_count = 0; - info->size = 0; - *addr = FLASH_CMD_RESET; - return (0); - - } - - /* device */ - value = addr[1 << FLASH_CMD_ADDR_SHIFT]; - switch (value) { - case (INTEL_ID_28F320J3A & FLASH_ID_MASK): - info->flash_id += FLASH_28F320J3A; - info->sector_count = 32; - info->size = 0x00400000; - break; - case (INTEL_ID_28F640J3A & FLASH_ID_MASK): - info->flash_id += FLASH_28F640J3A; - info->sector_count = 64; - info->size = 0x00800000; - break; - case (INTEL_ID_28F128J3A & FLASH_ID_MASK): - info->flash_id += FLASH_28F128J3A; - info->sector_count = 128; - info->size = 0x01000000; - break; - default: - info->flash_id = FLASH_UNKNOWN; - info->sector_count = 0; - info->size = 0; - *addr = FLASH_CMD_RESET; - return (0); - } - - /* setup sectors */ - for (i = 0; i < info->sector_count; i++) { - info->start[i] = (unsigned long)addr + (i * info->size/info->sector_count); - } - - /* check protected sectors */ - for (i = 0; i < info->sector_count; i++) { - p = (volatile FLASH_WORD_SIZE *)(info->start[i]); - info->protect[i] = p[2 << FLASH_CMD_ADDR_SHIFT] & 1; - } - - /* reset bank */ - *addr = FLASH_CMD_RESET; - return (info->size); -} - -unsigned long -flash_init(void) -{ - unsigned long size; - int i; - - for (i=0; i= CONFIG_SYS_FLASH_BASE - flash_protect(FLAG_PROTECT_SET, - CONFIG_SYS_MONITOR_FLASH, - CONFIG_SYS_MONITOR_FLASH+CONFIG_SYS_MONITOR_LEN-1, - &flash_info[0]); -#endif -#ifdef CONFIG_ENV_IS_IN_FLASH - flash_protect(FLAG_PROTECT_SET, - CONFIG_ENV_ADDR, - CONFIG_ENV_ADDR+CONFIG_ENV_SECT_SIZE-1, - &flash_info[0]); -#endif - return (size); -} - -void -flash_print_info(flash_info_t *info) -{ - int i; - - if (info->flash_id == FLASH_UNKNOWN) { - printf ("missing or unknown FLASH type\n"); - return; - } - - switch (info->flash_id & FLASH_VENDMASK) { - case FLASH_MAN_INTEL: printf ("INTEL "); break; - default: printf ("Unknown Vendor "); break; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case FLASH_28F320J3A: printf ("28F320JA3 (32 Mbit)\n"); - break; - case FLASH_28F640J3A: printf ("28F640JA3 (64 Mbit)\n"); - break; - case FLASH_28F128J3A: printf ("28F128JA3 (128 Mbit)\n"); - break; - default: printf ("Unknown Chip Type"); - break; - } - - printf (" Size: %ld MB in %d Sectors\n", - info->size >> 20, info->sector_count); - - printf (" Sector Start Addresses:"); - for (i=0; isector_count; ++i) { - if ((i % 5) == 0) - printf ("\n "); - printf (" %08lX%s", - info->start[i], - info->protect[i] ? " (RO)" : " " - ); - } - printf ("\n"); -} - -int -flash_erase(flash_info_t *info, int s_first, int s_last) -{ - unsigned long start, now, last; - int flag, prot, sect; - volatile FLASH_WORD_SIZE *addr; - FLASH_WORD_SIZE status; - - if ((s_first < 0) || (s_first > s_last)) { - if (info->flash_id == FLASH_UNKNOWN) { - printf ("- missing\n"); - } else { - printf ("- no sectors to erase\n"); - } - return (1); - } - - if (info->flash_id == FLASH_UNKNOWN) { - printf ("Cannot erase unknown flash - aborted\n"); - return (1); - } - - prot = 0; - for (sect=s_first; sect<=s_last; ++sect) { - if (info->protect[sect]) { - prot++; - } - } - - if (prot) { - printf ("- Warning: %d protected sectors will not be erased!\n", prot); - } else { - printf ("\n"); - } - - start = get_timer (0); - last = start; - - for (sect = s_first; sect<=s_last; sect++) { - if (info->protect[sect]) { - continue; - } - - addr = (volatile FLASH_WORD_SIZE *)(info->start[sect]); - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - -#ifdef DEBUG - printf("Erase sector %d at start addr 0x%08X", sect, (unsigned int)info->start[sect]); -#endif - - *addr = FLASH_CMD_CLEAR_STATUS; - *addr = FLASH_CMD_BLOCK_ERASE; - *addr = FLASH_CMD_ERASE_CONFIRM; - - /* re-enable interrupts if necessary */ - if (flag) { - enable_interrupts(); - } - - /* wait at least 80us - let's wait 1 ms */ - udelay (1000); - - while (((status = *addr) & FLASH_STATUS_DONE) != FLASH_STATUS_DONE) { - if ((now=get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) { - printf("Flash erase timeout at address %lx\n", info->start[sect]); - *addr = FLASH_CMD_SUSPEND_ERASE; - *addr = FLASH_CMD_RESET; - return (1); - } - - /* show that we're waiting */ - if ((now - last) > 1000) { /* every second */ - putc ('.'); - last = now; - } - } - *addr = FLASH_CMD_RESET; - } - printf (" done\n"); - return (0); -} - -static int -write_buff2( volatile FLASH_WORD_SIZE *dst, - volatile FLASH_WORD_SIZE *src, - unsigned long cnt ) -{ - unsigned long start; - FLASH_WORD_SIZE status; - int flag, i; - - start = get_timer (0); - while (1) { - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - dst[0] = FLASH_CMD_WRITE_BUFF; - if ((status = *dst) & FLASH_STATUS_DONE) { - break; - } - - /* re-enable interrupts if necessary */ - if (flag) { - enable_interrupts(); - } - - if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { - return (-1); - } - } - dst[0] = (FLASH_WORD_SIZE)(cnt - 1); - for (i=0; i CONFIG_SYS_FLASH_WRITE_TOUT) { - *addr = FLASH_CMD_RESET; - return (-1); - } - } - *addr = FLASH_CMD_RESET; - return (0); -} - -/* - * write_buff return values: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - * 4 - Flash not identified - */ -int -write_buff(flash_info_t *info, uchar *src, ulong udst, ulong cnt) -{ - volatile FLASH_WORD_SIZE *addr, *dst; - unsigned long bcnt; - int flag, i; - - if (info->flash_id == FLASH_UNKNOWN) { - return (4); - } - - addr = (volatile FLASH_WORD_SIZE *)(info->start[0]); - dst = (volatile FLASH_WORD_SIZE *) udst; - -#ifdef CONFIG_SYS_FLASH_16BIT -#error NYI -#else - while (cnt > 0) { - /* Check if buffer write is possible */ - if (cnt > 1 && (((unsigned long)dst & (FLASH_WRITE_BUFFER_SIZE - 1)) == 0)) { - bcnt = cnt > FLASH_WRITE_BUFFER_SIZE ? FLASH_WRITE_BUFFER_SIZE : cnt; - /* Check if Flash is (sufficiently) erased */ - for (i=0; istart[sector]); - *addr = FLASH_CMD_CLEAR_STATUS; - *addr = FLASH_CMD_PROTECT; - - if(prot) { - *addr = FLASH_CMD_PROTECT_SET; - } else { - *addr = FLASH_CMD_PROTECT_CLEAR; - } - - /* wait for error or finish */ - start = get_timer (0); - while(!(addr[0] & FLASH_STATUS_DONE)){ - if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) { - printf("Flash protect timeout at address %lx\n", info->start[sector]); - addr[0] = FLASH_CMD_RESET; - return (1); - } - } - - /* Set software protect flag */ - info->protect[sector] = prot; - *addr = FLASH_CMD_RESET; - return (0); -} diff --git a/board/funkwerk/vovpn-gw/m88e6060.c b/board/funkwerk/vovpn-gw/m88e6060.c deleted file mode 100644 index 7aa9593426..0000000000 --- a/board/funkwerk/vovpn-gw/m88e6060.c +++ /dev/null @@ -1,249 +0,0 @@ -/* - * (C) Copyright 2004 - * Elmeg Communications Systems GmbH, Juergen Selent (j.selent@elmeg.de) - * - * Support for the Elmeg VoVPN Gateway Module - * ------------------------------------------ - * Initialize Marvell M88E6060 Switch - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include -#include -#include - -#include "m88e6060.h" - -#if defined(CONFIG_CMD_NET) -static int prtTab[M88X_PRT_CNT] = { 8, 9, 10, 11, 12, 13 }; -static int phyTab[M88X_PHY_CNT] = { 0, 1, 2, 3, 4 }; - -static m88x_regCfg_t prtCfg0[] = { - { 4, 0x3e7c, 0x8000 }, - { 4, 0x3e7c, 0x8003 }, - { 6, 0x0fc0, 0x001e }, - { -1, 0xffff, 0x0000 } -}; - -static m88x_regCfg_t prtCfg1[] = { - { 4, 0x3e7c, 0x8000 }, - { 4, 0x3e7c, 0x8003 }, - { 6, 0x0fc0, 0x001d }, - { -1, 0xffff, 0x0000 } -}; - -static m88x_regCfg_t prtCfg2[] = { - { 4, 0x3e7c, 0x8000 }, - { 4, 0x3e7c, 0x8003 }, - { 6, 0x0fc0, 0x001b }, - { -1, 0xffff, 0x0000 } -}; - -static m88x_regCfg_t prtCfg3[] = { - { 4, 0x3e7c, 0x8000 }, - { 4, 0x3e7c, 0x8003 }, - { 6, 0x0fc0, 0x0017 }, - { -1, 0xffff, 0x0000 } -}; - -static m88x_regCfg_t prtCfg4[] = { - { 4, 0x3e7c, 0x8000 }, - { 4, 0x3e7c, 0x8003 }, - { 6, 0x0fc0, 0x000f }, - { -1, 0xffff, 0x0000 } -}; - -static m88x_regCfg_t *prtCfg[M88X_PRT_CNT] = { - prtCfg0,prtCfg1,prtCfg2,prtCfg3,prtCfg4,NULL -}; - -static m88x_regCfg_t phyCfgX[] = { - { 4, 0xfa1f, 0x01e0 }, - { 0, 0x213f, 0x1200 }, - { 24, 0x81ff, 0x1200 }, - { -1, 0xffff, 0x0000 } -}; - -static m88x_regCfg_t *phyCfg[M88X_PHY_CNT] = { - phyCfgX,phyCfgX,phyCfgX,phyCfgX,NULL -}; - -#if 0 -static void -m88e6060_dump( int devAddr ) -{ - int i, j; - unsigned short val[6]; - - printf( "M88E6060 Register Dump\n" ); - printf( "====================================\n" ); - printf( "PortNo 0 1 2 3 4 5\n" ); - for (i=0; i<6; i++) - miiphy_read( devAddr+prtTab[i],M88X_PRT_STAT,&val[i] ); - printf( "STAT %04hx %04hx %04hx %04hx %04hx %04hx\n", - val[0],val[1],val[2],val[3],val[4],val[5] ); - - for (i=0; i<6; i++) - miiphy_read( devAddr+prtTab[i],M88X_PRT_ID,&val[i] ); - printf( "ID %04hx %04hx %04hx %04hx %04hx %04hx\n", - val[0],val[1],val[2],val[3],val[4],val[5] ); - - for (i=0; i<6; i++) - miiphy_read( devAddr+prtTab[i],M88X_PRT_CNTL,&val[i] ); - printf( "CNTL %04hx %04hx %04hx %04hx %04hx %04hx\n", - val[0],val[1],val[2],val[3],val[4],val[5] ); - - for (i=0; i<6; i++) - miiphy_read( devAddr+prtTab[i],M88X_PRT_VLAN,&val[i] ); - printf( "VLAN %04hx %04hx %04hx %04hx %04hx %04hx\n", - val[0],val[1],val[2],val[3],val[4],val[5] ); - - for (i=0; i<6; i++) - miiphy_read( devAddr+prtTab[i],M88X_PRT_PAV,&val[i] ); - printf( "PAV %04hx %04hx %04hx %04hx %04hx %04hx\n", - val[0],val[1],val[2],val[3],val[4],val[5] ); - - for (i=0; i<6; i++) - miiphy_read( devAddr+prtTab[i],M88X_PRT_RX,&val[i] ); - printf( "RX %04hx %04hx %04hx %04hx %04hx %04hx\n", - val[0],val[1],val[2],val[3],val[4],val[5] ); - - for (i=0; i<6; i++) - miiphy_read( devAddr+prtTab[i],M88X_PRT_TX,&val[i] ); - printf( "TX %04hx %04hx %04hx %04hx %04hx %04hx\n", - val[0],val[1],val[2],val[3],val[4],val[5] ); - - printf( "------------------------------------\n" ); - printf( "PhyNo 0 1 2 3 4\n" ); - for (i=0; i<9; i++) { - for (j=0; j<5; j++) { - miiphy_read( devAddr+phyTab[j],i,&val[j] ); - } - printf( "0x%02x %04hx %04hx %04hx %04hx %04hx\n", - i,val[0],val[1],val[2],val[3],val[4] ); - } - for (i=0x10; i<0x1d; i++) { - for (j=0; j<5; j++) { - miiphy_read( devAddr+phyTab[j],i,&val[j] ); - } - printf( "0x%02x %04hx %04hx %04hx %04hx %04hx\n", - i,val[0],val[1],val[2],val[3],val[4] ); - } -} -#endif - -int -m88e6060_initialize( int devAddr ) -{ - static char *_f = "m88e6060_initialize:"; - m88x_regCfg_t *p; - int err; - int i; - unsigned short val; - - /*** reset all phys into powerdown ************************************/ - for (i=0, err=0; ienetaddr - val = (ea[4] << 8) | ea[5]; - err = bb_miiphy_write(NULL, devAddr+15,M88X_GLB_MAC45,val ); - val = (ea[2] << 8) | ea[3]; - err += bb_miiphy_write(NULL, devAddr+15,M88X_GLB_MAC23,val ); - val = (ea[0] << 8) | ea[1]; -#undef ea - val &= 0xfeff; /* clear DiffAddr */ - err += bb_miiphy_write(NULL, devAddr+15,M88X_GLB_MAC01,val ); - if (err) { - printf( "%s [ERR] switch mac address register\n",_f ); - return( -1 ); - } - - /* !DiscardExcessive, MaxFrameSize, CtrMode */ - err = bb_miiphy_read(NULL, devAddr+15,M88X_GLB_CNTL,&val ); - val &= 0xd870; - val |= 0x0500; - err += bb_miiphy_write(NULL, devAddr+15,M88X_GLB_CNTL,val ); - if (err) { - printf( "%s [ERR] switch global control register\n",_f ); - return( -1 ); - } - - /* LernDis off, ATUSize 1024, AgeTime 5min */ - err = bb_miiphy_read(NULL, devAddr+15,M88X_ATU_CNTL,&val ); - val &= 0x000f; - val |= 0x2130; - err += bb_miiphy_write(NULL, devAddr+15,M88X_ATU_CNTL,val ); - if (err) { - printf( "%s [ERR] atu control register\n",_f ); - return( -1 ); - } - - /*** initialize ports *************************************************/ - for (i=0; ireg != -1) { - err = 0; - err += bb_miiphy_read(NULL, devAddr+prtTab[i],p->reg,&val ); - val &= p->msk; - val |= p->val; - err += bb_miiphy_write(NULL, devAddr+prtTab[i],p->reg,val ); - if (err) { - printf( "%s [ERR] config port %d register %d\n",_f,i,p->reg ); - /* XXX what todo */ - } - p++; - } - } - - /*** initialize phys **************************************************/ - for (i=0; ireg != -1) { - err = 0; - err += bb_miiphy_read(NULL, devAddr+phyTab[i],p->reg,&val ); - val &= p->msk; - val |= p->val; - err += bb_miiphy_write(NULL, devAddr+phyTab[i],p->reg,val ); - if (err) { - printf( "%s [ERR] config phy %d register %d\n",_f,i,p->reg ); - /* XXX what todo */ - } - p++; - } - } - udelay(100000); - return( 0 ); -} -#endif diff --git a/board/funkwerk/vovpn-gw/m88e6060.h b/board/funkwerk/vovpn-gw/m88e6060.h deleted file mode 100644 index 5f7f6d11af..0000000000 --- a/board/funkwerk/vovpn-gw/m88e6060.h +++ /dev/null @@ -1,75 +0,0 @@ -/* - * (C) Copyright 2004 - * Elmeg Communications Systems GmbH, Juergen Selent (j.selent@elmeg.de) - * - * Support for the Elmeg VoVPN Gateway Module - * ------------------------------------------ - * Initialize Marvell M88E6060 Switch - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef _INC_m88e6060_h_ -#define _INC_m88e6060_h_ - -/* ************************************************************************** */ -/* *** DEFINES ************************************************************** */ - -/* switch hw */ -#define M88X_PRT_CNT 6 -#define M88X_PHY_CNT 5 - -/* phy register offsets */ -#define M88X_PHY_CNTL 0x00 -#define M88X_PHY_STAT 0x00 -#define M88X_PHY_ID0 0x02 -#define M88X_PHY_ID1 0x03 -#define M88X_PHY_ANEG_ADV 0x04 -#define M88X_PHY_LPA 0x05 -#define M88X_PHY_ANEG_EXP 0x06 -#define M88X_PHY_NPT 0x07 -#define M88X_PHY_LPNP 0x08 - -/* port register offsets */ -#define M88X_PRT_STAT 0x00 -#define M88X_PRT_ID 0x03 -#define M88X_PRT_CNTL 0x04 -#define M88X_PRT_VLAN 0x06 -#define M88X_PRT_PAV 0x0b -#define M88X_PRT_RX 0x10 -#define M88X_PRT_TX 0x11 - -/* global/atu register offsets */ -#define M88X_GLB_STAT 0x00 -#define M88X_GLB_MAC01 0x01 -#define M88X_GLB_MAC23 0x02 -#define M88X_GLB_MAC45 0x03 -#define M88X_GLB_CNTL 0x04 -#define M88X_ATU_CNTL 0x0a -#define M88X_ATU_OP 0x0b - -/* id0 register - 0x02 */ -#define M88X_PHY_ID0_VALUE 0x0141 - -/* id1 register - 0x03 */ -#define M88X_PHY_ID1_VALUE 0x0c80 /* without revision ! */ - - -/* misc */ -#define M88E6060_ID ((M88X_PHY_ID0_VALUE<<16) | M88X_PHY_ID1_VALUE) - -/* ************************************************************************** */ -/* *** TYPEDEFS ************************************************************* */ - -typedef struct { - int reg; - unsigned short msk; - unsigned short val; -} m88x_regCfg_t; - -/* ************************************************************************** */ -/* *** PROTOTYPES *********************************************************** */ - -extern int m88e6060_initialize( int ); - -#endif /* _INC_m88e6060_h_ */ diff --git a/board/funkwerk/vovpn-gw/vovpn-gw.c b/board/funkwerk/vovpn-gw/vovpn-gw.c deleted file mode 100644 index c2aad6eb05..0000000000 --- a/board/funkwerk/vovpn-gw/vovpn-gw.c +++ /dev/null @@ -1,363 +0,0 @@ -/* - * (C) Copyright 2004 - * Elmeg Communications Systems GmbH, Juergen Selent (j.selent@elmeg.de) - * - * Support for the Elmeg VoVPN Gateway Module - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include -#include -#include - -#include "m88e6060.h" - -/* - * I/O Port configuration table - * - * if conf is 1, then that port pin will be configured at boot time - * according to the five values podr/pdir/ppar/psor/pdat for that entry - */ - -const iop_conf_t iop_conf_tab[4][32] = { - /* Port A configuration */ - { /* conf ppar psor pdir podr pdat */ - /* PA31 */ { 1, 0, 0, 1, 0, 0 }, /* GPO TP1252 */ - /* PA30 */ { 1, 0, 0, 0, 0, 0 }, /* GPI BP_RES */ - /* PA29 */ { 1, 0, 0, 1, 0, 0 }, /* GPO TP1253 */ - /* PA28 */ { 1, 1, 1, 1, 0, 0 }, /* FCC1 RMII TX_EN */ - /* PA27 */ { 1, 1, 1, 0, 0, 0 }, /* FCC1 RMII CRS_DV */ - /* PA26 */ { 1, 1, 1, 0, 0, 0 }, /* FCC1 RMII RX_ERR */ - /* PA25 */ { 1, 0, 0, 0, 0, 0 }, /* GPI HWID */ - /* PA24 */ { 1, 0, 0, 0, 0, 0 }, /* GPI HWID */ - /* PA23 */ { 1, 0, 0, 0, 0, 0 }, /* GPI HWID */ - /* PA22 */ { 1, 0, 0, 0, 0, 0 }, /* GPI HWID */ - /* PA21 */ { 1, 0, 0, 0, 0, 0 }, /* GPI HWID */ - /* PA20 */ { 1, 0, 0, 1, 0, 1 }, /* GPO LED STATUS */ - /* PA19 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 RMII TxD[1] */ - /* PA18 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 RMII TxD[0] */ - /* PA17 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 RMII RxD[0] */ - /* PA16 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 RMII RxD[1] */ - /* PA15 */ { 1, 0, 0, 1, 0, 0 }, /* GPO TP1255 */ - /* PA14 */ { 1, 0, 0, 1, 0, 0 }, /* GPO TP???? */ - /* PA13 */ { 1, 0, 0, 1, 0, 1 }, /* GPO EN_BCTL1 XXX jse */ - /* PA12 */ { 1, 0, 0, 1, 0, 0 }, /* GPO SWITCH RESET */ - /* PA11 */ { 1, 0, 0, 1, 0, 0 }, /* GPO DSP SL1 RESET */ - /* PA10 */ { 1, 0, 0, 1, 0, 0 }, /* GPO DSP SL2 RESET */ - /* PA9 */ { 1, 1, 0, 1, 0, 0 }, /* SMC2 TXD */ - /* PA8 */ { 1, 1, 0, 0, 0, 0 }, /* SMC2 RXD */ - /* PA7 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exit */ - /* PA6 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exit */ - /* PA5 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exit */ - /* PA4 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exit */ - /* PA3 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exit */ - /* PA2 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exit */ - /* PA1 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exit */ - /* PA0 */ { 0, 0, 0, 0, 0, 0 } /* pin does not exit */ - }, - - /* Port B configuration */ - { /* conf ppar psor pdir podr pdat */ - /* PB31 */ { 1, 0, 0, 1, 0, 0 }, /* GPO TP1257 */ - /* PB30 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 RMII CRS_DV */ - /* PB29 */ { 1, 1, 1, 1, 0, 0 }, /* FCC2 RMII TX_EN */ - /* PB28 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 RMII RX_ERR */ - /* PB27 */ { 1, 1, 1, 0, 1, 0 }, /* TDM_B2 L1TXD XXX val=0 */ - /* PB26 */ { 1, 1, 1, 0, 1, 0 }, /* TDM_B2 L1RXD XXX val,dr */ - /* PB25 */ { 1, 0, 0, 1, 0, 0 }, /* GPO TP1259 */ - /* PB24 */ { 1, 1, 1, 0, 0, 0 }, /* TDM_B2 L1RSYNC */ - /* PB23 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 RMII TxD[1] */ - /* PB22 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 RMII TxD[0] */ - /* PB21 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 RMII RxD[0] */ - /* PB20 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 RMII RxD[1] */ - /* PB19 */ { 1, 0, 0, 1, 0, 1 }, /* GPO PHY MDC */ - /* PB18 */ { 1, 0, 0, 0, 0, 0 }, /* GPIO PHY MDIO */ - /* PB17 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */ - /* PB16 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */ - /* PB15 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */ - /* PB14 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */ - /* PB13 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */ - /* PB12 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */ - /* PB11 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */ - /* PB10 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */ - /* PB9 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */ - /* PB8 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */ - /* PB7 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */ - /* PB6 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */ - /* PB5 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */ - /* PB4 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */ - /* PB3 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */ - /* PB2 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */ - /* PB1 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */ - /* PB0 */ { 0, 0, 0, 0, 0, 0 } /* pin does not exist */ - }, - - /* Port C */ - { /* conf ppar psor pdir podr pdat */ - /* PC31 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */ - /* PC30 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */ - /* PC29 */ { 1, 0, 0, 1, 0, 0 }, /* GPO TP1183 */ - /* PC28 */ { 1, 0, 0, 1, 0, 0 }, /* GPO TP1184 */ - /* PC27 */ { 1, 1, 0, 0, 0, 0 }, /* CLK5 TDM_A1 RX */ - /* PC26 */ { 1, 0, 0, 1, 0, 0 }, /* GPO TP1185 */ - /* PC25 */ { 1, 0, 0, 1, 0, 0 }, /* GPO TP1178 */ - /* PC24 */ { 1, 0, 0, 1, 0, 0 }, /* GPO TP1186 */ - /* PC23 */ { 1, 1, 0, 0, 0, 0 }, /* CLK9 TDM_B2 RX */ - /* PC22 */ { 1, 1, 0, 0, 0, 0 }, /* CLK10 FCC1 RMII REFCLK */ - /* PC21 */ { 1, 0, 0, 1, 0, 0 }, /* GPO TP1187 */ - /* PC20 */ { 1, 0, 0, 1, 0, 0 }, /* GPO TP1182 */ - /* PC19 */ { 1, 0, 0, 1, 0, 0 }, /* GPO TP1188 */ - /* PC18 */ { 1, 0, 0, 1, 0, 0 }, /* GPO HW RESET */ - /* PC17 */ { 1, 1, 0, 1, 0, 0 }, /* BRG8 SWITCH CLKIN */ - /* PC16 */ { 1, 1, 0, 0, 0, 0 }, /* CLK16 FCC2 RMII REFCLK */ - /* PC15 */ { 1, 0, 0, 0, 0, 0 }, /* GPI SL1_MTYPE_3 */ - /* PC14 */ { 1, 0, 0, 0, 0, 0 }, /* GPI SL1_MTYPE_2 */ - /* PC13 */ { 1, 0, 0, 0, 0, 0 }, /* GPI SL1_MTYPE_1 */ - /* PC12 */ { 1, 0, 0, 0, 0, 0 }, /* GPI SL1_MTYPE_0 */ - /* PC11 */ { 1, 0, 0, 1, 0, 0 }, /* GPO TP1176 */ - /* PC10 */ { 1, 0, 0, 1, 0, 0 }, /* GPO TP1177 */ - /* PC9 */ { 1, 0, 0, 0, 0, 0 }, /* GPI SL2_MTYPE_3 */ - /* PC8 */ { 1, 0, 0, 0, 0, 0 }, /* GPI SL2_MTYPE_2 */ - /* PC7 */ { 1, 0, 0, 0, 0, 0 }, /* GPI SL2_MTYPE_1 */ - /* PC6 */ { 1, 0, 0, 0, 0, 0 }, /* GPI SL2_MTYPE_0 */ - /* PC5 */ { 1, 1, 0, 1, 0, 0 }, /* SMC1 TXD */ - /* PC4 */ { 1, 1, 0, 0, 0, 0 }, /* SMC1 RXD */ - /* PC3 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */ - /* PC2 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */ - /* PC1 */ { 1, 0, 0, 1, 0, 0 }, /* GPO TP1192 */ - /* PC0 */ { 1, 0, 0, 0, 0, 0 }, /* GPI RACK */ - }, - - /* Port D */ - { /* conf ppar psor pdir podr pdat */ - /* PD31 */ { 1, 0, 0, 1, 0, 0 }, /* GPO TP1193 */ - /* PD30 */ { 1, 0, 0, 1, 0, 0 }, /* GPO TP1194 */ - /* PD29 */ { 1, 0, 0, 1, 0, 0 }, /* GPO TP1195 */ - /* PD28 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */ - /* PD27 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */ - /* PD26 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */ - /* PD25 */ { 1, 0, 0, 1, 0, 0 }, /* GPO TP1179 */ - /* PD24 */ { 1, 0, 0, 1, 0, 0 }, /* GPO TP1180 */ - /* PD23 */ { 1, 0, 0, 1, 0, 0 }, /* GPO TP1181 */ - /* PD22 */ { 1, 1, 1, 0, 1, 0 }, /* TDM_A2 L1TXD */ - /* PD21 */ { 1, 1, 1, 0, 1, 0 }, /* TDM_A2 L1RXD */ - /* PD20 */ { 1, 1, 1, 0, 0, 0 }, /* TDM_A2 L1RSYNC */ - /* PD19 */ { 1, 0, 0, 1, 0, 0 }, /* GPO TP1196 */ - /* PD18 */ { 1, 0, 0, 1, 0, 0 }, /* GPO TP1197 */ - /* PD17 */ { 1, 0, 0, 1, 0, 0 }, /* GPO TP1198 */ - /* PD16 */ { 1, 0, 0, 1, 0, 0 }, /* GPO TP1199 */ - /* PD15 */ { 1, 0, 0, 1, 0, 0 }, /* GPO TP1250 */ - /* PD14 */ { 1, 0, 0, 1, 0, 0 }, /* GPO TP1251 */ - /* PD13 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */ - /* PD12 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */ - /* PD11 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */ - /* PD10 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */ - /* PD9 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */ - /* PD8 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */ - /* PD7 */ { 0, 0, 0, 1, 0, 0 }, /* GPO FL_BYTE */ - /* PD6 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */ - /* PD5 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */ - /* PD4 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */ - /* PD3 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */ - /* PD2 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */ - /* PD1 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */ - /* PD0 */ { 0, 0, 0, 0, 0, 0 } /* pin does not exist */ - } -}; - -void reset_phy (void) -{ - volatile ioport_t *iop; -#if defined(CONFIG_CMD_NET) - int i; - unsigned short val; -#endif - - iop = ioport_addr((immap_t *)CONFIG_SYS_IMMR, 0); - - /* Reset the PHY */ - iop->pdat &= 0xfff7ffff; /* PA12 = |SWITCH_RESET */ -#if defined(CONFIG_CMD_NET) - udelay(20000); - iop->pdat |= 0x00080000; - for (i=0; i<100; i++) { - udelay(20000); - if (bb_miiphy_read("FCC1", CONFIG_SYS_PHY_ADDR,2,&val ) == 0) { - break; - } - } - /* initialize switch */ - m88e6060_initialize( CONFIG_SYS_PHY_ADDR ); -#endif -} - -static unsigned long UPMATable[] = { - 0x8fffec00, 0x0ffcfc00, 0x0ffcfc00, 0x0ffcfc00, /* Words 0 to 3 */ - 0x0ffcfc04, 0x3ffdfc00, 0xfffffc01, 0xfffffc01, /* Words 4 to 7 */ - 0xfffffc00, 0xfffffc04, 0xfffffc01, 0xfffffc00, /* Words 8 to 11 */ - 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, /* Words 12 to 15 */ - 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, /* Words 16 to 19 */ - 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, /* Words 20 to 23 */ - 0x8fffec00, 0x00fffc00, 0x00fffc00, 0x00fffc00, /* Words 24 to 27 */ - 0x0ffffc04, 0xfffffc01, 0xfffffc01, 0xfffffc01, /* Words 28 to 31 */ - 0xfffffc00, 0xfffffc01, 0xfffffc01, 0xfffffc00, /* Words 32 to 35 */ - 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, /* Words 36 to 39 */ - 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, /* Words 40 to 43 */ - 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, /* Words 44 to 47 */ - 0xfffffc00, 0xfffffc04, 0xfffffc01, 0xfffffc00, /* Words 48 to 51 */ - 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, /* Words 52 to 55 */ - 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, /* Words 56 to 59 */ - 0xffffec00, 0xffffec04, 0xffffec00, 0xfffffc01 /* Words 60 to 63 */ -}; - -int board_early_init_f (void) -{ - volatile immap_t *immap; - volatile memctl8260_t *memctl; - volatile unsigned char *dummy; - int i; - - immap = (immap_t *) CONFIG_SYS_IMMR; - memctl = &immap->im_memctl; - -#if 0 - /* CS2-5 - DSP via UPMA */ - dummy = (volatile unsigned char *) (memctl->memc_br2 & BRx_BA_MSK); - memctl->memc_mar = 0; - memctl->memc_mamr = MxMR_OP_WARR; - for (i = 0; i < 64; i++) { - memctl->memc_mdr = UPMATable[i]; - *dummy = 0; - } - memctl->memc_mamr = 0x00044440; -#else - /* CS7 - DPRAM via UPMA */ - dummy = (volatile unsigned char *) (memctl->memc_br7 & BRx_BA_MSK); - memctl->memc_mar = 0; - memctl->memc_mamr = MxMR_OP_WARR; - for (i = 0; i < 64; i++) { - memctl->memc_mdr = UPMATable[i]; - *dummy = 0; - } - memctl->memc_mamr = 0x00044440; -#endif - return 0; -} - -int misc_init_r (void) -{ - volatile ioport_t *iop; - __maybe_unused unsigned char temp; -#if 0 - /* DUMP UPMA RAM */ - volatile immap_t *immap; - volatile memctl8260_t *memctl; - volatile unsigned char *dummy; - unsigned char c; - int i; - - immap = (immap_t *) CONFIG_SYS_IMMR; - memctl = &immap->im_memctl; - - - dummy = (volatile unsigned char *) (memctl->memc_br7 & BRx_BA_MSK); - memctl->memc_mar = 0; - memctl->memc_mamr = MxMR_OP_RARR; - for (i = 0; i < 64; i++) { - c = *dummy; - printf( "UPMA[%02d]: 0x%08lx,0x%08lx: 0x%08lx\n",i, - memctl->memc_mamr, - memctl->memc_mar, - memctl->memc_mdr ); - } - memctl->memc_mamr = 0x00044440; -#endif - /* enable buffers (DSP, DPRAM) */ - iop = ioport_addr((immap_t *)CONFIG_SYS_IMMR, 0); - iop->pdat &= 0xfffbffff; /* PA13 = |EN_M_BCTL1 */ - - /* destroy DPRAM magic */ - *(volatile unsigned char *)0xf0500000 = 0x00; - - /* clear any pending DPRAM irq */ - temp = *(volatile unsigned char *)0xf05003ff; - - /* write module-id into DPRAM */ - *(volatile unsigned char *)0xf0500201 = 0x50; - - return 0; -} - -#if defined(CONFIG_HAVE_OWN_RESET) -int -do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - volatile ioport_t *iop; - - iop = ioport_addr((immap_t *)CONFIG_SYS_IMMR, 2); - iop->pdat |= 0x00002000; /* PC18 = HW_RESET */ - return 1; -} -#endif /* CONFIG_HAVE_OWN_RESET */ - -#define ns2clk(ns) (ns / (1000000000 / CONFIG_8260_CLKIN) + 1) - -phys_size_t initdram (int board_type) -{ -#ifndef CONFIG_SYS_RAMBOOT - volatile immap_t *immap; - volatile memctl8260_t *memctl; - volatile uchar *ramaddr; - int i; - uchar c; - - immap = (immap_t *) CONFIG_SYS_IMMR; - memctl = &immap->im_memctl; - ramaddr = (uchar *) CONFIG_SYS_SDRAM_BASE; - c = 0xff; - - immap->im_siu_conf.sc_ppc_acr = 0x02; - immap->im_siu_conf.sc_ppc_alrh = 0x01267893; - immap->im_siu_conf.sc_ppc_alrl = 0x89abcdef; - immap->im_siu_conf.sc_tescr1 = 0x00000000; - immap->im_siu_conf.sc_tescr2 = 0x00000000; - - memctl->memc_mptpr = CONFIG_SYS_MPTPR; - memctl->memc_psrt = CONFIG_SYS_PSRT; - memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM; - memctl->memc_br1 = CONFIG_SYS_SDRAM_BASE | CONFIG_SYS_BR1_PRELIM; - - /* Precharge all banks */ - memctl->memc_psdmr = CONFIG_SYS_PSDMR | 0x28000000; - *ramaddr = c; - - /* CBR refresh */ - memctl->memc_psdmr = CONFIG_SYS_PSDMR | 0x08000000; - for (i = 0; i < 8; i++) - *ramaddr = c; - - /* Mode Register write */ - memctl->memc_psdmr = CONFIG_SYS_PSDMR | 0x18000000; - *ramaddr = c; - - /* Refresh enable */ - memctl->memc_psdmr = CONFIG_SYS_PSDMR | 0x40000000; - *ramaddr = c; -#endif /* CONFIG_SYS_RAMBOOT */ - - return (CONFIG_SYS_SDRAM_SIZE); -} - -int checkboard (void) -{ -#ifdef CONFIG_CLKIN_66MHz - puts ("Board: Elmeg VoVPN Gateway Module (66MHz)\n"); -#else - puts ("Board: Elmeg VoVPN Gateway Module (100MHz)\n"); -#endif - return 0; -} diff --git a/configs/VoVPN-GW_66MHz_defconfig b/configs/VoVPN-GW_66MHz_defconfig deleted file mode 100644 index 4eb931e0fc..0000000000 --- a/configs/VoVPN-GW_66MHz_defconfig +++ /dev/null @@ -1,4 +0,0 @@ -CONFIG_SYS_EXTRA_OPTIONS="CLKIN_66MHz" -CONFIG_PPC=y -CONFIG_MPC8260=y -CONFIG_TARGET_VOVPN_GW=y diff --git a/doc/README.scrapyard b/doc/README.scrapyard index 46b6dbe3ff..7e4eaefe14 100644 --- a/doc/README.scrapyard +++ b/doc/README.scrapyard @@ -12,6 +12,7 @@ The list should be sorted in reverse chronological order. Board Arch CPU Commit Removed Last known maintainer/contact ================================================================================================= +VoVPN-GW powerpc mpc8260 - - ep8260 powerpc mpc8260 - - Frank Panno ppmc8260 powerpc mpc8260 - - Brad Kemp sacsng powerpc mpc8260 - - Jerry Van Baren diff --git a/include/configs/VoVPN-GW.h b/include/configs/VoVPN-GW.h deleted file mode 100644 index 1ceef113d6..0000000000 --- a/include/configs/VoVPN-GW.h +++ /dev/null @@ -1,399 +0,0 @@ -/* - * (C) Copyright 2004 - * Elmeg Communications Systems GmbH, Juergen Selent (j.selent@elmeg.de) - * - * Support for the Elmeg VoVPN Gateway Module - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* define cpu used */ -#define CONFIG_MPC8272 1 - -/* define busmode: 8260 */ -#undef CONFIG_BUSMODE_60x - -#define CONFIG_SYS_TEXT_BASE 0xfff00000 - -/* system clock rate (CLKIN) - equal to the 60x and local bus speed */ -#ifdef CONFIG_CLKIN_66MHz -#define CONFIG_8260_CLKIN 66666666 /* in Hz */ -#else -#define CONFIG_8260_CLKIN 100000000 /* in Hz */ -#endif - -/* call board_early_init_f */ -#define CONFIG_BOARD_EARLY_INIT_F 1 - -/* have misc_init_r() function */ -#define CONFIG_MISC_INIT_R 1 - -/* have reset_phy_r() function */ -#define CONFIG_RESET_PHY_R 1 - -/* have special reset function */ -#define CONFIG_HAVE_OWN_RESET 1 - -/* allow serial and ethaddr to be overwritten */ -#define CONFIG_ENV_OVERWRITE - -/* watchdog disabled */ -#undef CONFIG_WATCHDOG - -/* include support for bzip2 compressed images */ -#undef CONFIG_BZIP2 - -/* status led */ -#undef CONFIG_STATUS_LED /* XXX jse */ - -/* vendor parameter protection */ -#define CONFIG_ENV_OVERWRITE - -/* - * select serial console configuration - * - * if either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then - * CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4 - * for SCC). - */ -#define CONFIG_CONS_ON_SMC -#undef CONFIG_CONS_ON_SCC -#undef CONFIG_CONS_NONE -#define CONFIG_CONS_INDEX 1 - -/* serial port default baudrate */ -#define CONFIG_BAUDRATE 115200 - -/* echo on for serial download */ -#define CONFIG_LOADS_ECHO 1 - -/* don't allow baudrate change */ -#undef CONFIG_SYS_LOADS_BAUD_CHANGE - -/* - * select ethernet configuration - * - * if either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected, then - * CONFIG_ETHER_INDEX must be set to the channel number (1-4 for SCC, 1-3 - * for FCC) - * - * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be - * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset. - */ -#undef CONFIG_ETHER_ON_SCC -#define CONFIG_ETHER_ON_FCC -#undef CONFIG_ETHER_NONE - -#ifdef CONFIG_ETHER_ON_FCC - -/* which SCC/FCC channel for ethernet */ -#define CONFIG_ETHER_INDEX 1 - -/* Marvell Switch SMI base addr */ -#define CONFIG_SYS_PHY_ADDR 0x10 - -/* FCC1 RMII REFCLK is CLK10 */ -#define CONFIG_SYS_CMXFCR_VALUE CMXFCR_TF1CS_CLK10 -#define CONFIG_SYS_CMXFCR_MASK (CMXFCR_FC1|CMXFCR_TF1CS_MSK) - -/* BDs and buffers on 60x bus */ -#define CONFIG_SYS_CPMFCR_RAMTYPE 0 - -/* Local Protect, Full duplex, Flowcontrol, RMII */ -#define CONFIG_SYS_FCC_PSMR (FCC_PSMR_LPB|FCC_PSMR_FDE|\ - FCC_PSMR_FCE|FCC_PSMR_RMII) - -/* bit-bang MII PHY management */ -#define CONFIG_BITBANGMII - -#define MDIO_PORT 1 /* Port B */ - -#define MDIO_DECLARE volatile ioport_t *iop = ioport_addr ( \ - (immap_t *) CONFIG_SYS_IMMR, MDIO_PORT ) -#define MDC_DECLARE MDIO_DECLARE - -#define CONFIG_SYS_MDIO_PIN 0x00002000 /* PB18 */ -#define CONFIG_SYS_MDC_PIN 0x00001000 /* PB19 */ -#define MDIO_ACTIVE (iop->pdir |= CONFIG_SYS_MDIO_PIN) -#define MDIO_TRISTATE (iop->pdir &= ~CONFIG_SYS_MDIO_PIN) -#define MDIO_READ ((iop->pdat & CONFIG_SYS_MDIO_PIN) != 0) -#define MDIO(bit) if(bit) iop->pdat |= CONFIG_SYS_MDIO_PIN; \ - else iop->pdat &= ~CONFIG_SYS_MDIO_PIN -#define MDC(bit) if(bit) iop->pdat |= CONFIG_SYS_MDC_PIN; \ - else iop->pdat &= ~CONFIG_SYS_MDC_PIN -#define MIIDELAY udelay(1) - -#endif - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ - -#define CONFIG_CMD_BDI -#define CONFIG_CMD_CONSOLE -#define CONFIG_CMD_ECHO -#define CONFIG_CMD_FLASH -#define CONFIG_CMD_IMI -#define CONFIG_CMD_IMLS -#define CONFIG_CMD_LOADB -#define CONFIG_CMD_MEMORY -#define CONFIG_CMD_MISC -#define CONFIG_CMD_NET -#define CONFIG_CMD_PING -#define CONFIG_CMD_RUN -#define CONFIG_CMD_SAVEENV -#define CONFIG_CMD_SOURCE - - -/* - * boot options & environment - */ -#define CONFIG_BOOTDELAY 3 -#define CONFIG_BOOTCOMMAND "run flash_self" -#undef CONFIG_BOOTARGS -#define CONFIG_EXTRA_ENV_SETTINGS \ -"clean_nv=erase fff20000 ffffffff\0" \ -"update_boss=tftp 100000 PPC/logic157.bin; protect off fff00000 ffffffff; erase fff00000 ffffffff; cp.b 100000 fff00000 ${filesize}; tftp 100000 PPC/bootmon157.bin; cp.b 100000 fff20000 ${filesize}\0" \ -"update_lx=tftp 100000 ${kernel}; erase ${kernel_addr} ffefffff; cp.b 100000 ${kernel_addr} ${filesize}\0" \ -"update_fs=tftp 100000 ${fs}.${fstype}; erase ff840000 ffdfffff; cp.b 100000 ff840000 ${filesize}\0" \ -"update_ub=tftp 100000 ${uboot}; protect off fff00000 fff1ffff; erase fff00000 fff1ffff; cp.b 100000 fff00000 ${filesize}; protect off ff820000 ff83ffff; erase ff820000 ff83ffff\0" \ -"flashargs=setenv bootargs root=${rootdev} rw rootfstype=${fstype}\0" \ -"nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath}\0" \ -"addip=setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}:${netdev}:off\0" \ -"addmisc=setenv bootargs ${bootargs} console=${console},${baudrate} ethaddr=${ethaddr} panic=1\0" \ -"net_nfs=tftpboot 400000 ${kernel}; run nfsargs addip addmisc; bootm\0" \ -"net_self=tftpboot 400000 ${kernel}; run flashargs addmisc; bootm\0" \ -"flash_self=run flashargs addmisc; bootm ${kernel_addr}\0" \ -"flash_nfs=run nfsargs addip addmisc; bootm ${kernel_addr}\0" \ -"fstype=cramfs\0" \ -"rootpath=/root_fs\0" \ -"uboot=PPC/u-boot.bin\0" \ -"kernel=PPC/uImage\0" \ -"kernel_addr=ffe00000\0" \ -"fs=PPC/root_fs\0" \ -"console=ttyS0\0" \ -"netdev=eth0\0" \ -"rootdev=31:3\0" \ -"ethaddr=00:09:4f:01:02:03\0" \ -"ipaddr=10.0.0.201\0" \ -"netmask=255.255.255.0\0" \ -"serverip=10.0.0.136\0" \ -"gatewayip=10.0.0.10\0" \ -"hostname=bastard\0" \ -"" - - -/* - * miscellaneous configurable options - */ - -/* undef to save memory */ -#define CONFIG_SYS_LONGHELP - -/* monitor command prompt */ - -/* console i/o buffer size */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 -#else -#define CONFIG_SYS_CBSIZE 256 -#endif - -/* print buffer size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) - -/* max number of command args */ -#define CONFIG_SYS_MAXARGS 16 - -/* boot argument buffer size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - -/* memtest works on */ -#define CONFIG_SYS_MEMTEST_START 0x00100000 -/* 1 ... 15 MB in DRAM */ -#define CONFIG_SYS_MEMTEST_END 0x00f00000 -/* full featured memtest */ -#define CONFIG_SYS_ALT_MEMTEST - -/* default load address */ -#define CONFIG_SYS_LOAD_ADDR 0x00100000 - -/* decrementer freq: 1 ms ticks */ - -/* configure flash */ -#define CONFIG_SYS_FLASH_BASE 0xff800000 -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define CONFIG_SYS_MAX_FLASH_SECT 64 -#define CONFIG_SYS_FLASH_SIZE 8 -#undef CONFIG_SYS_FLASH_16BIT -#define CONFIG_SYS_FLASH_ERASE_TOUT 240000 -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 -#define CONFIG_SYS_FLASH_LOCK_TOUT 500 -#define CONFIG_SYS_FLASH_UNLOCK_TOUT 10000 -#define CONFIG_SYS_FLASH_PROTECTION - -/* monitor in flash */ -#define CONFIG_SYS_MONITOR_OFFSET 0x00700000 - -/* environment in flash */ -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x00020000) -#define CONFIG_ENV_SIZE 0x00020000 -#define CONFIG_ENV_SECT_SIZE 0x00020000 - -/* - * Initial memory map for linux - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) - -/* hard reset configuration words */ -#ifdef CONFIG_CLKIN_66MHz -#define CONFIG_SYS_HRCW_MASTER 0x04643050 -#else -#error NO HRCW FOR 100MHZ SPECIFIED !!! -#endif -#define CONFIG_SYS_HRCW_SLAVE1 0x00000000 -#define CONFIG_SYS_HRCW_SLAVE2 0x00000000 -#define CONFIG_SYS_HRCW_SLAVE3 0x00000000 -#define CONFIG_SYS_HRCW_SLAVE4 0x00000000 -#define CONFIG_SYS_HRCW_SLAVE5 0x00000000 -#define CONFIG_SYS_HRCW_SLAVE6 0x00000000 -#define CONFIG_SYS_HRCW_SLAVE7 0x00000000 - -/* internal memory mapped register */ -#define CONFIG_SYS_IMMR 0xF0000000 - -/* definitions for initial stack pointer and data area (in DPRAM) */ -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_SIZE 0x2000 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -/* - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_SDRAM_SIZE (32*1024*1024) -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_MONITOR_FLASH (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_OFFSET) -#define CONFIG_SYS_MONITOR_LEN 0x00020000 -#define CONFIG_SYS_MALLOC_LEN 0x00020000 - -/* cache configuration */ -#define CONFIG_SYS_CACHELINE_SIZE 32 /* for MPC8260 */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of above */ -#endif - -/* - * HIDx - Hardware Implementation-dependent Registers - *----------------------------------------------------------------------- - * HID0 also contains cache control - initially enable both caches and - * invalidate contents, then the final state leaves only the instruction - * cache enabled. Note that Power-On and Hard reset invalidate the caches, - * but Soft reset does not. - * - * HID1 has only read-only information - nothing to set. - */ -#define CONFIG_SYS_HID0_INIT (HID0_ICE|HID0_DCE|\ - HID0_ICFI|HID0_DCI|HID0_IFEM|HID0_ABE) -#define CONFIG_SYS_HID0_FINAL (HID0_IFEM|HID0_ABE) -#define CONFIG_SYS_HID2 0 - -/* RMR - reset mode register - turn on checkstop reset enable */ -#define CONFIG_SYS_RMR RMR_CSRE - -/* BCR - bus configuration */ -#define CONFIG_SYS_BCR 0x00000000 - -/* SIUMCR - siu module configuration */ -#define CONFIG_SYS_SIUMCR 0x4905c000 - -/* SYPCR - system protection control */ -#if defined(CONFIG_WATCHDOG) -#define CONFIG_SYS_SYPCR 0xffffff87 -#else -#define CONFIG_SYS_SYPCR 0xffffff83 -#endif - -/* TMCNTSC - time counter status and control */ -/* clear interrupts XXX jse */ -/*#define CONFIG_SYS_TMCNTSC (TMCNTSC_SEC|TMCNTSC_ALR) */ -#define CONFIG_SYS_TMCNTSC (TMCNTSC_SEC|TMCNTSC_ALR|\ - TMCNTSC_TCF|TMCNTSC_TCE) - -/* PISCR - periodic interrupt status and control */ -/* clear interrupts XXX jse */ -/*#define CONFIG_SYS_PISCR (PISCR_PS) */ -#define CONFIG_SYS_PISCR (PISCR_PS|PISCR_PTF|PISCR_PTE) - -/* SCCR - system clock control */ -#define CONFIG_SYS_SCCR 0x000001a9 - -/* RCCR - risc controller configuration */ -#define CONFIG_SYS_RCCR 0 - -/* - * MEMORY MAP - * ---------- - * CS0 - FLASH 8MB/8Bit base=0xff800000 (boot: 0xfe000000, 8x mirrored) - * CS1 - SDRAM 32MB/64Bit base=0x00000000 - * CS2 - DSP/SL1 1MB/16Bit base=0xf0100000 - * CS3 - DSP/SL2 1MB/16Bit base=0xf0200000 - * CS4 - DSP/SL3 1MB/16Bit base=0xf0300000 - * CS5 - DSP/SL4 1MB/16Bit base=0xf0400000 - * CS7 - DPRAM 1KB/8Bit base=0xf0500000, size=32KB (32x mirrored) - * x - IMMR 384KB base=0xf0000000 - */ -/* XXX jse 100MHz TODO */ -#define CONFIG_SYS_BR0_PRELIM 0xff800801 -#define CONFIG_SYS_OR0_PRELIM 0xff801e44 -#define CONFIG_SYS_BR1_PRELIM 0x00000041 -#define CONFIG_SYS_OR1_PRELIM 0xfe002ec0 -#if 1 -#define CONFIG_SYS_BR2_PRELIM 0xf0101001 -#define CONFIG_SYS_OR2_PRELIM 0xfff00ef4 -#define CONFIG_SYS_BR3_PRELIM 0xf0201001 -#define CONFIG_SYS_OR3_PRELIM 0xfff00ef4 -#define CONFIG_SYS_BR4_PRELIM 0xf0301001 -#define CONFIG_SYS_OR4_PRELIM 0xfff00ef4 -#define CONFIG_SYS_BR5_PRELIM 0xf0401001 -#define CONFIG_SYS_OR5_PRELIM 0xfff00ef4 -#else -#define CONFIG_SYS_BR2_PRELIM 0xf0101081 -#define CONFIG_SYS_OR2_PRELIM 0xfff00104 -#define CONFIG_SYS_BR3_PRELIM 0xf0201081 -#define CONFIG_SYS_OR3_PRELIM 0xfff00104 -#define CONFIG_SYS_BR4_PRELIM 0xf0301081 -#define CONFIG_SYS_OR4_PRELIM 0xfff00104 -#define CONFIG_SYS_BR5_PRELIM 0xf0401081 -#define CONFIG_SYS_OR5_PRELIM 0xfff00104 -#endif -#define CONFIG_SYS_BR7_PRELIM 0xf0500881 -#define CONFIG_SYS_OR7_PRELIM 0xffff8104 -#define CONFIG_SYS_MPTPR 0x2700 -#define CONFIG_SYS_PSDMR 0x822a2452 /* optimal */ -/*#define CONFIG_SYS_PSDMR 0x822a48a3 */ /* relaxed */ -#define CONFIG_SYS_PSRT 0x1a - -/* "bad" address */ -#define CONFIG_SYS_RESET_ADDRESS 0x40000000 - -#endif /* __CONFIG_H */