From: wdenk Date: Sat, 2 Nov 2002 22:58:18 +0000 (+0000) Subject: Initial revision X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=cc1c8a136f9813d0a9cb9a94d2f12206873ddc4e;p=u-boot.git Initial revision --- diff --git a/CHANGELOG b/CHANGELOG new file mode 100644 index 0000000000..094060fb96 --- /dev/null +++ b/CHANGELOG @@ -0,0 +1,12 @@ + +====================================================================== +Notes for U-Boot 1.0.0: +====================================================================== + +This is the initial version of "Das U-Boot", the Universal Boot Loader. + +It is based on version 2.0.0 (the "Halloween Release") of PPCBoot. +For information about the history of the project please see the +PPCBoot project page at http://sourceforge.net/projects/ppcboot + +====================================================================== diff --git a/MAINTAINERS b/MAINTAINERS new file mode 100644 index 0000000000..de370865ff --- /dev/null +++ b/MAINTAINERS @@ -0,0 +1,249 @@ +######################################################################### +# # +# Regular Maintainers for U-Boot board support: # +# # +# For any board without permanent maintainer, please contact # +# for PowerPC systems: # +# Wolfgang Denk # +# for ARM systems: # +# Marius Gröger # +# and Cc: the mailing lists. # +# # +# Note: lists sorted by Maintainer Name # +######################################################################### + + +######################################################################### +# # +# Maintainer Name, Email Address # +# Board CPU # +######################################################################### + +Greg Allen + + UTX8245 MPC8245 + +Pantelis Antoniou + + NETVIA MPC8xx + +Jerry Van Baren + + sacsng MPC8260 + +Oliver Brown + + sbc8260 MPC8260 + gw8260 MPC8260 + +Conn Clark + + ESTEEM192E MPC8xx + +Kári Davíðsson + + FLAGADM MPC823 + +Wolfgang Denk + + AMX860 MPC860 + ETX094 MPC850 + FPS850L MPC850 + ICU862 MPC862 + IP860 MPC860 + IVML24 MPC860 + IVML24_128 MPC860 + IVML24_256 MPC860 + IVMS8 MPC860 + IVMS8_128 MPC860 + IVMS8_256 MPC860 + LANTEC MPC850 + RRvision MPC823 + SM850 MPC850 + SPD823TS MPC823 + TQM823L MPC823 + TQM823L_LCD MPC823 + TQM850L MPC850 + TQM855L MPC855 + TQM860L MPC860 + TQM860L_FEC MPC860 + c2mon MPC855 + hermes MPC860 + lwmon MPC823 + pcu_e MPC855 + + CU824 MPC8240 + Sandpoint8240 MPC8240 + + CPU86 MPC8260 + PM826 MPC8260 + TQM8260 MPC8260 + + PCIPPC2 MPC750 + PCIPPC6 MPC750 + +Jon Diekema + + sbc8260 MPC8260 + +Dave Ellis + + SXNI855T MPC8xx + +Frank Gottschling + + MHPC MPC8xx + + BAB7xx MPC740/MPC750 + +Wolfgang Grandegger + + CCM MPC855 + + PN62 MPC8240 + + IPHASE4539 MPC8260 + SCM MPC8260 + +Howard Gray + + MVS1 MPC823 + +Murray Jensen + + cogent_mpc8xx MPC8xx + + cogent_mpc8260 MPC8260 + hymod MPC8260 + +Brad Kemp + + ppmc8260 MPC8260 + +Nye Liu + + ZUMA MPC7xx_74xx + +Thomas Lange + + GTH MPC860 + +Eran Man + + EVB64260_750CX MPC750CX + +Scott McNutt + + EBONY PPC440GP + +Keith Outwater + + GEN860T MPC860T + +Frank Panno + + ep8260 MPC8260 + +Denis Peter + + MIP405 PPC4xx + PIP405 PPC4xx + +Stefan Roese + + ADCIOP IOP480 (PPC401) + AR405 PPC405GP + CANBT PPC405CR + CPCI405 PPC405GP + CPCI440 PPC440GP + CPCIISER4 PPC405GP + DASA_SIM IOP480 (PPC401) + DU405 PPC405GP + OCRTC PPC405GP + ORSG PPC405GP + +Peter De Schrijver + + ML2 PPC4xx + +Erik Theisen + + W7OLMC PPC4xx + W7OLMG PPC4xx + +Jim Thompson + + MUSENKI MPC8245/8241 + Sandpoint8245 MPC8245 + +------------------------------------------------------------------------- + +Unknown / orphaned boards: + + ADS860 MPC8xx + FADS823 MPC8xx + FADS850SAR MPC8xx + FADS860T MPC8xx + GENIETV MPC8xx + IAD210 MPC8xx + MBX MPC8xx + MBX860T MPC8xx + NX823 MPC8xx + RPXClassic MPC8xx + RPXlite MPC8xx + + CRAYL1 PPC4xx + ERIC PPC4xx + WALNUT405 PPC4xx + + MOUSSE MPC824x + + MPC8260ADS MPC8260 + RPXsuper MPC8260 + rsdproto MPC8260 + + EVB64260 MPC7xx_74xx + + +######################################################################### +# ARM Systems: # +# # +# Maintainer Name, Email Address # +# Board CPU # +######################################################################### + +Marius Gröger + + impa7 ARM720T (EP7211) + ep7312 ARM720T (EP7312) + +Kyle Harris + + lubbock xscale + cradle xscale + +Gary Jennejohn + + smdk2400 ARM920T + trab ARM920T + +David Müller + + smdk2410 ARM920T + +Rolf Offermanns + + shannon SA1100 + +Robert Schwebel + + csb226 xscale + +Alex Züpke + + lart SA1100 + dnp1110 SA1110 + +######################################################################### +# End of MAINTAINERS list # +######################################################################### diff --git a/board/cpu86/flash.c b/board/cpu86/flash.c new file mode 100644 index 0000000000..8cf761f1e6 --- /dev/null +++ b/board/cpu86/flash.c @@ -0,0 +1,615 @@ +/* + * (C) Copyright 2001, 2002 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Flash Routines for Intel devices + * + *-------------------------------------------------------------------- + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include "cpu86.h" + +flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; + +/*----------------------------------------------------------------------- + */ +ulong flash_int_get_size (volatile unsigned long *baseaddr, + flash_info_t * info) +{ + short i; + unsigned long flashtest_h, flashtest_l; + + info->sector_count = info->size = 0; + info->flash_id = FLASH_UNKNOWN; + + /* Write query command sequence and test FLASH answer + */ + baseaddr[0] = 0x00980098; + baseaddr[1] = 0x00980098; + + flashtest_h = baseaddr[0]; /* manufacturer ID */ + flashtest_l = baseaddr[1]; + + if (flashtest_h != INTEL_MANUFACT || flashtest_l != INTEL_MANUFACT) + return (0); /* no or unknown flash */ + + flashtest_h = baseaddr[2]; /* device ID */ + flashtest_l = baseaddr[3]; + + if (flashtest_h != flashtest_l) + return (0); + + switch (flashtest_h) { + case INTEL_ID_28F160C3B: + info->flash_id = FLASH_28F160C3B; + info->sector_count = 39; + info->size = 0x00800000; /* 4 * 2 MB = 8 MB */ + break; + case INTEL_ID_28F160F3B: + info->flash_id = FLASH_28F160F3B; + info->sector_count = 39; + info->size = 0x00800000; /* 4 * 2 MB = 8 MB */ + break; + default: + return (0); /* no or unknown flash */ + } + + info->flash_id |= INTEL_MANUFACT << 16; /* set manufacturer offset */ + + if (info->flash_id & FLASH_BTYPE) { + volatile unsigned long *tmp = baseaddr; + + /* set up sector start adress table (bottom sector type) + * AND unlock the sectors (if our chip is 160C3) + */ + for (i = 0; i < info->sector_count; i++) { + if ((info->flash_id & FLASH_TYPEMASK) == FLASH_28F160C3B) { + tmp[0] = 0x00600060; + tmp[1] = 0x00600060; + tmp[0] = 0x00D000D0; + tmp[1] = 0x00D000D0; + } + info->start[i] = (uint) tmp; + tmp += i < 8 ? 0x2000 : 0x10000; /* pointer arith */ + } + } + + memset (info->protect, 0, info->sector_count); + + baseaddr[0] = 0x00FF00FF; + baseaddr[1] = 0x00FF00FF; + + return (info->size); +} + +static ulong flash_amd_get_size (vu_char *addr, flash_info_t *info) +{ + short i; + uchar vendor, devid; + ulong base = (ulong)addr; + + /* Write auto select command: read Manufacturer ID */ + addr[0x0555] = 0xAA; + addr[0x02AA] = 0x55; + addr[0x0555] = 0x90; + + udelay(1000); + + vendor = addr[0]; + devid = addr[1] & 0xff; + + /* only support AMD */ + if (vendor != 0x01) { + return 0; + } + + vendor &= 0xf; + devid &= 0xff; + + if (devid == AMD_ID_F040B) { + info->flash_id = vendor << 16 | devid; + info->sector_count = 8; + info->size = info->sector_count * 0x10000; + } + else if (devid == AMD_ID_F080B) { + info->flash_id = vendor << 16 | devid; + info->sector_count = 16; + info->size = 4 * info->sector_count * 0x10000; + } + else if (devid == AMD_ID_F016D) { + info->flash_id = vendor << 16 | devid; + info->sector_count = 32; + info->size = 4 * info->sector_count * 0x10000; + } + else { + printf ("## Unknown Flash Type: %02x\n", devid); + return 0; + } + + /* check for protected sectors */ + for (i = 0; i < info->sector_count; i++) { + /* sector base address */ + info->start[i] = base + i * (info->size / info->sector_count); + /* read sector protection at sector address, (A7 .. A0) = 0x02 */ + /* D0 = 1 if protected */ + addr = (volatile unsigned char *)(info->start[i]); + info->protect[i] = addr[2] & 1; + } + + /* + * Prevent writes to uninitialized FLASH. + */ + if (info->flash_id != FLASH_UNKNOWN) { + addr = (vu_char *)info->start[0]; + addr[0] = 0xF0; /* reset bank */ + } + + return (info->size); +} + + +/*----------------------------------------------------------------------- + */ +unsigned long flash_init (void) +{ + unsigned long size_b0 = 0; + unsigned long size_b1 = 0; + int i; + + /* Init: no FLASHes known + */ + for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) { + flash_info[i].flash_id = FLASH_UNKNOWN; + } + + /* Disable flash protection */ + CPU86_BCR |= (CPU86_BCR_FWPT | CPU86_BCR_FWRE); + + /* Static FLASH Bank configuration here (only one bank) */ + + size_b0 = flash_int_get_size ((ulong *) CFG_FLASH_BASE, &flash_info[0]); + size_b1 = flash_amd_get_size ((uchar *) CFG_BOOTROM_BASE, &flash_info[1]); + + if (size_b0 > 0 || size_b1 > 0) { + + printf("("); + + if (size_b0 > 0) { + puts ("Bank#1 - "); + print_size (size_b0, (size_b1 > 0) ? ", " : ") "); + } + + if (size_b1 > 0) { + puts ("Bank#2 - "); + print_size (size_b1, ") "); + } + } + else { + printf ("## No FLASH found.\n"); + return 0; + } + /* protect monitor and environment sectors + */ + +#if CFG_MONITOR_BASE >= CFG_BOOTROM_BASE + if (size_b1) { + /* If U-Boot is booted from ROM the CFG_MONITOR_BASE > CFG_FLASH_BASE + * but we shouldn't protect it. + */ + + flash_protect (FLAG_PROTECT_SET, + CFG_MONITOR_BASE, + CFG_MONITOR_BASE + CFG_MONITOR_LEN - 1, &flash_info[1] + ); + } +#else +#if CFG_MONITOR_BASE >= CFG_FLASH_BASE + flash_protect (FLAG_PROTECT_SET, + CFG_MONITOR_BASE, + CFG_MONITOR_BASE + CFG_MONITOR_LEN - 1, &flash_info[0] + ); +#endif +#endif + +#if (CFG_ENV_IS_IN_FLASH == 1) && defined(CFG_ENV_ADDR) +# ifndef CFG_ENV_SIZE +# define CFG_ENV_SIZE CFG_ENV_SECT_SIZE +# endif +# if CFG_ENV_ADDR >= CFG_BOOTROM_BASE + if (size_b1) { + flash_protect (FLAG_PROTECT_SET, + CFG_ENV_ADDR, + CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[1]); + } +# else + flash_protect (FLAG_PROTECT_SET, + CFG_ENV_ADDR, + CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]); +# endif +#endif + + return (size_b0 + size_b1); +} + +/*----------------------------------------------------------------------- + */ +void flash_print_info (flash_info_t * info) +{ + int i; + + if (info->flash_id == FLASH_UNKNOWN) { + printf ("missing or unknown FLASH type\n"); + return; + } + + switch ((info->flash_id >> 16) & 0xff) { + case 0x89: + printf ("INTEL "); + break; + case 0x1: + printf ("AMD "); + break; + default: + printf ("Unknown Vendor "); + break; + } + + switch (info->flash_id & FLASH_TYPEMASK) { + case FLASH_28F160C3B: + printf ("28F160C3B (16 Mbit, bottom sector)\n"); + break; + case FLASH_28F160F3B: + printf ("28F160F3B (16 Mbit, bottom sector)\n"); + break; + case AMD_ID_F040B: + printf ("AM29F040B (4 Mbit)\n"); + break; + default: + printf ("Unknown Chip Type\n"); + break; + } + + if (info->size < 0x100000) + printf (" Size: %ld KB in %d Sectors\n", + info->size >> 10, info->sector_count); + else + printf (" Size: %ld MB in %d Sectors\n", + info->size >> 20, info->sector_count); + + printf (" Sector Start Addresses:"); + for (i = 0; i < info->sector_count; ++i) { + if ((i % 5) == 0) + printf ("\n "); + printf (" %08lX%s", + info->start[i], + info->protect[i] ? " (RO)" : " " + ); + } + printf ("\n"); +} + +/*----------------------------------------------------------------------- + */ +int flash_erase (flash_info_t * info, int s_first, int s_last) +{ + vu_char *addr = (vu_char *)(info->start[0]); + int flag, prot, sect, l_sect; + ulong start, now, last; + + if ((s_first < 0) || (s_first > s_last)) { + if (info->flash_id == FLASH_UNKNOWN) { + printf ("- missing\n"); + } else { + printf ("- no sectors to erase\n"); + } + return 1; + } + + prot = 0; + for (sect = s_first; sect <= s_last; sect++) { + if (info->protect[sect]) + prot++; + } + + if (prot) { + printf ("- Warning: %d protected sectors will not be erased!\n", + prot); + } else { + printf ("\n"); + } + + /* Check the type of erased flash + */ + if (info->flash_id >> 16 == 0x1) { + /* Erase AMD flash + */ + l_sect = -1; + + /* Disable interrupts which might cause a timeout here */ + flag = disable_interrupts(); + + addr[0x0555] = 0xAA; + addr[0x02AA] = 0x55; + addr[0x0555] = 0x80; + addr[0x0555] = 0xAA; + addr[0x02AA] = 0x55; + + /* wait at least 80us - let's wait 1 ms */ + udelay (1000); + + /* Start erase on unprotected sectors */ + for (sect = s_first; sect<=s_last; sect++) { + if (info->protect[sect] == 0) { /* not protected */ + addr = (vu_char *)(info->start[sect]); + addr[0] = 0x30; + l_sect = sect; + } + } + + /* re-enable interrupts if necessary */ + if (flag) + enable_interrupts(); + + /* wait at least 80us - let's wait 1 ms */ + udelay (1000); + + /* + * We wait for the last triggered sector + */ + if (l_sect < 0) + goto AMD_DONE; + + start = get_timer (0); + last = start; + addr = (vu_char *)(info->start[l_sect]); + while ((addr[0] & 0x80) != 0x80) { + if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) { + printf ("Timeout\n"); + return 1; + } + /* show that we're waiting */ + if ((now - last) > 1000) { /* every second */ + serial_putc ('.'); + last = now; + } + } + +AMD_DONE: + /* reset to read mode */ + addr = (volatile unsigned char *)info->start[0]; + addr[0] = 0xF0; /* reset bank */ + + } else { + /* Erase Intel flash + */ + + /* Start erase on unprotected sectors + */ + for (sect = s_first; sect <= s_last; sect++) { + volatile ulong *addr = + (volatile unsigned long *) info->start[sect]; + + start = get_timer (0); + last = start; + if (info->protect[sect] == 0) { + /* Disable interrupts which might cause a timeout here + */ + flag = disable_interrupts (); + + /* Erase the block + */ + addr[0] = 0x00200020; + addr[1] = 0x00200020; + addr[0] = 0x00D000D0; + addr[1] = 0x00D000D0; + + /* re-enable interrupts if necessary + */ + if (flag) + enable_interrupts (); + + /* wait at least 80us - let's wait 1 ms + */ + udelay (1000); + + last = start; + while ((addr[0] & 0x00800080) != 0x00800080 || + (addr[1] & 0x00800080) != 0x00800080) { + if ((now = get_timer (start)) > CFG_FLASH_ERASE_TOUT) { + printf ("Timeout (erase suspended!)\n"); + /* Suspend erase + */ + addr[0] = 0x00B000B0; + addr[1] = 0x00B000B0; + goto DONE; + } + /* show that we're waiting + */ + if ((now - last) > 1000) { /* every second */ + serial_putc ('.'); + last = now; + } + } + if (addr[0] & 0x00220022 || addr[1] & 0x00220022) { + printf ("*** ERROR: erase failed!\n"); + goto DONE; + } + } + /* Clear status register and reset to read mode + */ + addr[0] = 0x00500050; + addr[1] = 0x00500050; + addr[0] = 0x00FF00FF; + addr[1] = 0x00FF00FF; + } + } + + printf (" done\n"); + +DONE: + return 0; +} + +static int write_word (flash_info_t *, volatile unsigned long *, ulong); +static int write_byte (flash_info_t *info, ulong dest, uchar data); + +/*----------------------------------------------------------------------- + * Copy memory to flash, returns: + * 0 - OK + * 1 - write timeout + * 2 - Flash not erased + */ +int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) +{ + ulong v; + int i, l, rc, cc = cnt, res = 0; + + if (info->flash_id >> 16 == 0x1) { + + /* Write to AMD 8-bit flash + */ + while (cnt > 0) { + if ((rc = write_byte(info, addr, *src)) != 0) { + return (rc); + } + addr++; + src++; + cnt--; + } + + return (0); + } else { + + /* Write to Intel 64-bit flash + */ + for (v=0; cc > 0; addr += 4, cc -= 4 - l) { + l = (addr & 3); + addr &= ~3; + + for (i = 0; i < 4; i++) { + v = (v << 8) + (i < l || i - l >= cc ? + *((unsigned char *) addr + i) : *src++); + } + + if ((res = write_word (info, (volatile unsigned long *) addr, v)) != 0) + break; + } + } + + return (res); +} + +/*----------------------------------------------------------------------- + * Write a word to Flash, returns: + * 0 - OK + * 1 - write timeout + * 2 - Flash not erased + */ +static int write_word (flash_info_t * info, volatile unsigned long *addr, + ulong data) +{ + int flag, res = 0; + ulong start; + + /* Check if Flash is (sufficiently) erased + */ + if ((*addr & data) != data) + return (2); + + /* Disable interrupts which might cause a timeout here + */ + flag = disable_interrupts (); + + *addr = 0x00400040; + *addr = data; + + /* re-enable interrupts if necessary + */ + if (flag) + enable_interrupts (); + + start = get_timer (0); + while ((*addr & 0x00800080) != 0x00800080) { + if (get_timer (start) > CFG_FLASH_WRITE_TOUT) { + /* Suspend program + */ + *addr = 0x00B000B0; + res = 1; + goto OUT; + } + } + + if (*addr & 0x00220022) { + printf ("*** ERROR: program failed!\n"); + res = 1; + } + +OUT: + /* Clear status register and reset to read mode + */ + *addr = 0x00500050; + *addr = 0x00FF00FF; + + return (res); +} + +/*----------------------------------------------------------------------- + * Write a byte to Flash, returns: + * 0 - OK + * 1 - write timeout + * 2 - Flash not erased + */ +static int write_byte (flash_info_t *info, ulong dest, uchar data) +{ + vu_char *addr = (vu_char *)(info->start[0]); + ulong start; + int flag; + + /* Check if Flash is (sufficiently) erased */ + if ((*((vu_char *)dest) & data) != data) { + return (2); + } + /* Disable interrupts which might cause a timeout here */ + flag = disable_interrupts(); + + addr[0x0555] = 0xAA; + addr[0x02AA] = 0x55; + addr[0x0555] = 0xA0; + + *((vu_char *)dest) = data; + + /* re-enable interrupts if necessary */ + if (flag) + enable_interrupts(); + + /* data polling for D7 */ + start = get_timer (0); + while ((*((vu_char *)dest) & 0x80) != (data & 0x80)) { + if (get_timer(start) > CFG_FLASH_WRITE_TOUT) { + return (1); + } + } + return (0); +} + +/*----------------------------------------------------------------------- + */ diff --git a/board/lwmon/README.keybd b/board/lwmon/README.keybd new file mode 100644 index 0000000000..bf759c6c67 --- /dev/null +++ b/board/lwmon/README.keybd @@ -0,0 +1,127 @@ + +Tastaturabfrage: + +Die Implementierung / Decodierung beruht auf den Angaben aus dem Do- +kument "PIC LWE-Tastatur" in der Fassung vom 9. 3. 2001, insbesonde- +re Tabelle 3 im Kapitel 4.3 Tastencodes. In U-Boot werden die vom +Keyboard-Controller gelesenen Daten hexadezimal codiert in der auto- +matisch angelegten Environment-Variablen "keybd" übergeben. Ist kei- +ne Taste gedrückt worden, steht dort: + + keybd=000000000000000000 + +Der decodierte Tastencode ("keybd") kann mit den "bootargs" an den +Linux-Kernel übergeben und dort z. B. in einem Device-Treiber oder +einer Applikation ausgewertet werden. + + + +Sonderfunktionen beim Booten: + +Es lassen sich eine oder mehrere (beliebig viele) Tasten oder Tasten- +kombinationen definieren, die Sonderfunktionen auslösen, wenn diese +Tasten beim Booten (Reset) gedrückt sind. + +Wird eine eingestellte Taste bzw. Tastenkombination erkannt, so wird +in U-Boot noch vor dem Start des "Countdown" und somit vor jedem an- +deren Kommando der Inhalt einer dieser Taste bzw. Tastenkombination +zugeordneten Environment-Variablen ausführen. + + +Die Environment-Variable "magic_keys" wird als Liste von Zeichen ver- +standen, die als Suffix an den Namen "key_magic" angefügt werden und +so die Namen der Environment-Variablen definieren, mit denen die +Tasten (-kombinationen) festgelegt werden: + +Ist "magic_keys" NICHT definiert, so wird nur die in der Environment- +Variablen "key_magic" codierte Tasten (-kombination) geprüft, und +ggf. der Inhalt der Environment-Variablen "key_cmd" ausgeführt (ge- +nauer: der Inhalt von "key_cmd" wird der Variablen "preboot" zugewie- +sen, die ausgeführt wird, unmittelbar bevor die interaktive Kommando- +interpretation beginnt). + +Enthält "magic_keys" z. B. die Zeichenkette "0123CB*", so werden +nacheinander folgende Aktionen ausgeführt: + + prüfe Tastencode ggf. führe aus Kommando + in Variable in Variable + ----------------------------------- + key_magic0 ==> key_cmd0 + key_magic1 ==> key_cmd1 + key_magic2 ==> key_cmd2 + key_magic3 ==> key_cmd3 + key_magicC ==> key_cmdC + key_magicB ==> key_cmdB + key_magicA ==> key_cmdA + key_magic* ==> key_cmd* + +Hinweis: sobald ein aktivierter Tastencode erkannt wurde, wird die +Bearbeitung abgebrochen; es wird daher höchstens eines der definier- +ten Kommandos ausgeführt, wobei die Priorität durch die Suchreihen- +folge festgelegt wird, also durch die Reihenfolge der Zeichen in der +Varuiablen "magic_keys". + + +Die Codierung der Tasten, die beim Booten gedrückt werden müssen, um +eine Funktion auszulösen, erfolgt nach der Tastaturtabelle. + +Die Definitionen + + => setenv key_magic0 3a+3b + => setenv key_cmd0 setenv bootdelay 30 + +bedeuten dementsprechend, daß die Tasten mit den Codes 0x3A (Taste +"F1") und 0x3B (Taste "F2") gleichzeitig gedrückt werden müssen. Sie +können dort eine beliebige Tastenkombination eintragen (jeweils 2 +Zeichen für die Hex-Codes der Tasten, und '+' als Trennzeichen). + +Wird die eingestellte Tastenkombination erkannt, so wird in U-Boot +noch vor dem Start des "Countdown" und somit vor jedem anderen Kom- +mando das angebene Kommando ausgeführt und somit ein langes Boot- +Delay eingetragen. + +Praktisch könnten Sie also in U-Boot "bootdelay" auf 0 setzen und +somit stets ohne jede User-Interaktion automatisch booten, außer, +wenn die beiden Tasten "F1" und "F2" beim Booten gedrückt werden: +dann würde ein Boot-Delay von 30 Sekunden eingefügt. + + +Hinweis: dem Zeichen '#' kommt innerhalb von "magic_keys" eine beson- +dere Bedeutung zu: die dadurch definierte Key-Sequenz schaltet den +Monitor in den "Debug-Modus" - das bedeutet zunächst, daß alle weite- +ren Meldungen von U-Boot über das LCD-Display ausgegeben werden; +außerdem kann man durch das mit dieser Tastenkombination verknüpfte +Kommando z. B. die Linux-Bootmeldungen ebenfalls auf das LCD-Display +legen, so daß der Boot-Vorgang direkt und ohne weitere Hilfsmittel +analysiert werden kann. + +Beispiel: + +In U-Boot werden folgende Environment-Variablen gesetzt und abgespei- +chert: + +(1) => setenv magic_keys 01234#X +(2) => setenv key_cmd# setenv addfb setenv bootargs \\$(bootargs) console=tty0 console=ttyS1,\\$(baudrate) +(3) => setenv nfsargs setenv bootargs root=/dev/nfs rw nfsroot=\$(serverip):\$(rootpath) +(4) => setenv addip setenv bootargs \$(bootargs) ip=\$(ipaddr):\$(serverip):\$(gatewayip):\$(netmask):\$(hostname)::off panic=1 +(5) => setenv addfb setenv bootargs \$(bootargs) console=ttyS1,\$(baudrate) +(6) => setenv bootcmd bootp\;run nfsargs\;run addip\;run addfb\;bootm + +Hierbei wird die Linux Commandline (in der Variablen "bootargs") im +Boot-Kommando "bootcmd" (6) schrittweise zusammengesetzt: zunächst +werden die für Root-Filesystem über NFS erforderlichen Optionen ge- +setzt ("run nfsargs", vgl. (3)), dann die Netzwerkkonfiguration an- +gefügt ("run addip", vgl. (4)), und schließlich die Systemconsole +definiert ("run addfb"). + +Dabei wird im Normalfall die Definition (5) verwendt; wurde aller- +dings beim Reset die entsprechende Taste gedrückt gehalten, so wird +diese Definition bei der Ausführung des in (2) definierten Kommandos +überschrieben, so daß Linux die Bootmeldungen auch über das Frame- +buffer-Device (=LCD-Display) ausgibt. + +Beachten Sie die Verdoppelung der '\'-Escapes in der Definition von +"key_cmd#" - diese ist erforderlich, weil der String _zweimal_ inter- +pretiert wird: das erste Mal bei der Eingabe von "key_cmd#", das +zweite Mal, wenn der String (als Inhalt von "preboot") ausgeführt +wird. diff --git a/board/mousse/flash.c b/board/mousse/flash.c new file mode 100644 index 0000000000..3c4a802da6 --- /dev/null +++ b/board/mousse/flash.c @@ -0,0 +1,944 @@ +/* + * MOUSSE/MPC8240 Board definitions. + * Flash Routines for MOUSSE onboard AMD29LV106DB devices + * + * (C) Copyright 2000 + * Marius Groeger + * Sysgo Real-Time Solutions, GmbH + * + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * (C) Copyright 1999, by Curt McDowell, 08-06-99, Broadcom Corp. + * (C) Copyright 2001, James Dougherty, 07/18/01, Broadcom Corp. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include "mousse.h" +#include "flash.h" + +int flashLibDebug = 0; +int flashLibInited = 0; + +#define OK 0 +#define ERROR -1 +#define STATUS int +#define PRINTF if (flashLibDebug) printf +#if 0 +#define PRIVATE static +#else +#define PRIVATE +#endif + +flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; + +#define SLEEP_DELAY 166 +#define FLASH_SECTOR_SIZE (64*1024) +/*********************************************************************** + * + * Virtual Flash Devices on Mousse board + * + * These must be kept in sync with the definitions in flashLib.h. + * + ***********************************************************************/ + +PRIVATE flash_dev_t flashDev[] = { + /* Bank 0 sector SA0 (16 kB) */ + { "SA0",FLASH0_BANK, FLASH0_SEG0_START, 1, 14, + FLASH0_VENDOR_ID, FLASH0_DEVICE_ID + }, + /* Bank 0 sector SA1 (8 kB) */ + { "SA1", FLASH0_BANK, FLASH0_SEG0_START + 0x4000, 1, 13, + FLASH0_VENDOR_ID, FLASH0_DEVICE_ID + }, + /* Bank 0 sector SA2 (8 kB) */ + { "SA2", FLASH0_BANK, FLASH0_SEG0_START + 0x6000, 1, 13, + FLASH0_VENDOR_ID, FLASH0_DEVICE_ID + }, + /* Bank 0 sector SA3 is occluded by Mousse I/O devices */ + /* Bank 0 sectors SA4-SA18, after Mousse devices up to PLCC (960 kB) */ + { "KERNEL", FLASH0_BANK, FLASH0_SEG1_START, 15, 16, + FLASH0_VENDOR_ID, FLASH0_DEVICE_ID + }, + /* Bank 0 sectors SA19-SA26, jumper can occlude this by PLCC (512 kB) */ + /* This is where the Kahlua boot vector and boot ROM code resides. */ + { "BOOT",FLASH0_BANK, FLASH0_SEG2_START, 8, 16, + FLASH0_VENDOR_ID, FLASH0_DEVICE_ID + }, + /* Bank 0 sectors SA27-SA34 (512 kB) */ + { "RAMDISK",FLASH0_BANK, FLASH0_SEG3_START, 8, 16, + FLASH0_VENDOR_ID, FLASH0_DEVICE_ID + }, +}; + +int flashDevCount = (sizeof (flashDev) / sizeof (flashDev[0])); + +#define DEV(no) (&flashDev[no]) +#define DEV_NO(dev) ((dev) - flashDev) + +/*********************************************************************** + * + * Private Flash Routines + * + ***********************************************************************/ + +/* + * The convention is: + * + * "addr" is always the PROM raw address, which is the address of an + * 8-bit quantity for flash 0 and 16-bit quantity for flash 1. + * + * "pos" is always a logical byte position from the PROM beginning. + */ + +#define FLASH0_ADDR(dev, addr) \ + ((unsigned char *) ((dev)->base + (addr))) + +#define FLASH0_WRITE(dev, addr, value) \ + (*FLASH0_ADDR(dev, addr) = (value)) + +#define FLASH0_READ(dev, addr) \ + (*FLASH0_ADDR(dev, addr)) + +PRIVATE int flashCheck(flash_dev_t *dev) +{ + if (! flashLibInited) { + printf("flashCheck: flashLib not initialized\n"); + return ERROR; + } + + if (dev < &flashDev[0] || dev >= &flashDev[flashDevCount]) { + printf("flashCheck: Bad dev parameter\n"); + return ERROR; + } + + if (! dev->found) { + printf("flashCheck: Device %d not available\n", DEV_NO(dev)); + return ERROR; + } + + return OK; +} + +PRIVATE void flashReset(flash_dev_t *dev) +{ + PRINTF("flashReset: dev=%d\n", DEV_NO(dev)); + + if (dev->bank == FLASH0_BANK) { + FLASH0_WRITE(dev, 0x555, 0xaa); + FLASH0_WRITE(dev, 0xaaa, 0x55); + FLASH0_WRITE(dev, 0x555, 0xf0); + } + + udelay(SLEEP_DELAY); + + PRINTF("flashReset: done\n"); +} + +PRIVATE int flashProbe(flash_dev_t *dev) +{ + int rv, deviceID, vendorID; + + PRINTF("flashProbe: dev=%d\n", DEV_NO(dev)); + + if (dev->bank != FLASH0_BANK) { + rv = ERROR; + goto DONE; + } + + FLASH0_WRITE(dev, 0xaaa, 0xaa); + FLASH0_WRITE(dev, 0x555, 0x55); + FLASH0_WRITE(dev, 0xaaa, 0x90); + + udelay(SLEEP_DELAY); + + vendorID = FLASH0_READ(dev, 0); + deviceID = FLASH0_READ(dev, 2); + + FLASH0_WRITE(dev, 0, 0xf0); + + PRINTF("flashProbe: vendor=0x%x device=0x%x\n", vendorID, deviceID); + + if (vendorID == dev->vendorID && deviceID == dev->deviceID) + rv = OK; + else + rv = ERROR; + +DONE: + PRINTF("flashProbe: rv=%d\n", rv); + + return rv; +} + +PRIVATE int flashWait(flash_dev_t *dev, int addr, int expect, int erase) +{ + int rv = ERROR; + int i, data; + int polls; +#if 0 + PRINTF("flashWait: dev=%d addr=0x%x expect=0x%x erase=%d\n", + DEV_NO(dev), addr, expect, erase); +#endif + + if (dev->bank != FLASH0_BANK) { + rv = ERROR; + goto done; + } + + if (erase) + polls = FLASH_ERASE_SECTOR_TIMEOUT; /* Ticks */ + else + polls = FLASH_PROGRAM_POLLS; /* Loops */ + + for (i = 0; i < polls; i++) { + if (erase) + udelay(SLEEP_DELAY); + + data = FLASH0_READ(dev, addr); + + if (((data ^ expect) & 0x80) == 0) { + rv = OK; + goto done; + } + + if (data & 0x20) { + /* + * If the 0x20 bit has come on, it could actually be because + * the operation succeeded, so check the done bit again. + */ + + data = FLASH0_READ(dev, addr); + + if (((data ^ expect) & 0x80) == 0) { + rv = OK; + goto done; + } + + printf("flashWait: Program error (dev: %d, addr: 0x%x)\n", + DEV_NO(dev), addr); + + flashReset(dev); + rv = ERROR; + goto done; + } + } + + printf("flashWait: Timeout %s (dev: %d, addr: 0x%x)\n", + erase ? "erasing sector" : "programming byte", + DEV_NO(dev), addr); + +done: + +#if 0 + PRINTF("flashWait: rv=%d\n", rv); +#endif + + return rv; +} + +/*********************************************************************** + * + * Public Flash Routines + * + ***********************************************************************/ + +STATUS flashLibInit(void) +{ + int i; + + PRINTF("flashLibInit: devices=%d\n", flashDevCount); + + for (i = 0; i < flashDevCount; i++) { + flash_dev_t *dev = &flashDev[i]; + /* + * For bank 1, probe both without and with byte swappage, + * so that this module works on both old and new Mousse boards. + */ + + flashReset(dev); + + if (flashProbe(dev) != ERROR) + dev->found = 1; + + flashReset(dev); + + if (flashProbe(dev) != ERROR) + dev->found = 1; + + dev->swap = 0; + + if(dev->found){ + PRINTF("\n FLASH %s[%d]: iobase=0x%x - %d sectors %d KB", + flashDev[i].name,i,flashDev[i].base, flashDev[i].sectors, + (flashDev[i].sectors * FLASH_SECTOR_SIZE)/1024); + + } + } + + flashLibInited = 1; + + PRINTF("flashLibInit: done\n"); + + return OK; +} + +STATUS flashEraseSector(flash_dev_t *dev, int sector) +{ + int pos, addr; + + PRINTF("flashErasesector: dev=%d sector=%d\n", DEV_NO(dev), sector); + + if (flashCheck(dev) == ERROR) + return ERROR; + + if (sector < 0 || sector >= dev->sectors) { + printf("flashEraseSector: Sector out of range (dev: %d, sector: %d)\n", + DEV_NO(dev), sector); + return ERROR; + } + + pos = FLASH_SECTOR_POS(dev, sector); + + if (dev->bank != FLASH0_BANK) { + return ERROR; + } + + addr = pos; + + FLASH0_WRITE(dev, 0xaaa, 0xaa); + FLASH0_WRITE(dev, 0x555, 0x55); + FLASH0_WRITE(dev, 0xaaa, 0x80); + FLASH0_WRITE(dev, 0xaaa, 0xaa); + FLASH0_WRITE(dev, 0x555, 0x55); + FLASH0_WRITE(dev, addr, 0x30); + + return flashWait(dev, addr, 0xff, 1); +} + +/* + * Note: it takes about as long to flash all sectors together with Chip + * Erase as it does to flash them one at a time (about 30 seconds for 2 + * MB). Also since we want to be able to treat subsets of sectors as if + * they were complete devices, we don't use Chip Erase. + */ + +STATUS flashErase(flash_dev_t *dev) +{ + int sector; + + PRINTF("flashErase: dev=%d sectors=%d\n", DEV_NO(dev), dev->sectors); + + if (flashCheck(dev) == ERROR) + return ERROR; + + for (sector = 0; sector < dev->sectors; sector++) { + if (flashEraseSector(dev, sector) == ERROR) + return ERROR; + } + return OK; +} + +/* + * Read and write bytes + */ + +STATUS flashRead(flash_dev_t *dev, int pos, char *buf, int len) +{ + int addr, words; + + PRINTF("flashRead: dev=%d pos=0x%x buf=0x%x len=0x%x\n", + DEV_NO(dev), pos, (int) buf, len); + + if (flashCheck(dev) == ERROR) + return ERROR; + + if (pos < 0 || len < 0 || pos + len > FLASH_MAX_POS(dev)) { + printf("flashRead: Position out of range " + "(dev: %d, pos: 0x%x, len: 0x%x)\n", + DEV_NO(dev), pos, len); + return ERROR; + } + + if (len == 0) + return OK; + + if (dev->bank == FLASH0_BANK) { + addr = pos; + words = len; + + PRINTF("flashRead: memcpy(0x%x, 0x%x, 0x%x)\n", + (int) buf, (int) FLASH0_ADDR(dev, pos), len); + + memcpy(buf, FLASH0_ADDR(dev, addr), words); + + } + PRINTF("flashRead: rv=OK\n"); + + return OK; +} + +STATUS flashWrite(flash_dev_t *dev, int pos, char *buf, int len) +{ + int addr, words; + + PRINTF("flashWrite: dev=%d pos=0x%x buf=0x%x len=0x%x\n", + DEV_NO(dev), pos, (int) buf, len); + + if (flashCheck(dev) == ERROR) + return ERROR; + + if (pos < 0 || len < 0 || pos + len > FLASH_MAX_POS(dev)) { + printf("flashWrite: Position out of range " + "(dev: %d, pos: 0x%x, len: 0x%x)\n", + DEV_NO(dev), pos, len); + return ERROR; + } + + if (len == 0) + return OK; + + if (dev->bank == FLASH0_BANK) { + unsigned char tmp; + + addr = pos; + words = len; + + while (words--) { + tmp = *buf; + if (~FLASH0_READ(dev, addr) & tmp) { + printf("flashWrite: Attempt to program 0 to 1 " + "(dev: %d, addr: 0x%x, data: 0x%x)\n", + DEV_NO(dev), addr, tmp); + return ERROR; + } + FLASH0_WRITE(dev, 0xaaa, 0xaa); + FLASH0_WRITE(dev, 0x555, 0x55); + FLASH0_WRITE(dev, 0xaaa, 0xa0); + FLASH0_WRITE(dev, addr, tmp); + if (flashWait(dev, addr, tmp, 0) < 0) + return ERROR; + buf++; + addr++; + } + } + + PRINTF("flashWrite: rv=OK\n"); + + return OK; +} + +/* + * flashWritable returns TRUE if a range contains all F's. + */ + +STATUS flashWritable(flash_dev_t *dev, int pos, int len) +{ + int addr, words; + int rv = ERROR; + + PRINTF("flashWritable: dev=%d pos=0x%x len=0x%x\n", + DEV_NO(dev), pos, len); + + if (flashCheck(dev) == ERROR) + goto done; + + if (pos < 0 || len < 0 || pos + len > FLASH_MAX_POS(dev)) { + printf("flashWritable: Position out of range " + "(dev: %d, pos: 0x%x, len: 0x%x)\n", + DEV_NO(dev), pos, len); + goto done; + } + + if (len == 0) { + rv = 1; + goto done; + } + + if (dev->bank == FLASH0_BANK) { + addr = pos; + words = len; + + while (words--) { + if (FLASH0_READ(dev, addr) != 0xff) { + rv = 0; + goto done; + } + addr++; + } + } + + rv = 1; + + done: + PRINTF("flashWrite: rv=%d\n", rv); + return rv; +} + + +/* + * NOTE: the below code cannot run from FLASH!!! + */ +/*********************************************************************** + * + * Flash Diagnostics + * + ***********************************************************************/ + +STATUS flashDiag(flash_dev_t *dev) +{ + unsigned int *buf = 0; + int i, len, sector; + int rv = ERROR; + + if (flashCheck(dev) == ERROR) + return ERROR; + + printf("flashDiag: Testing device %d, " + "base: 0x%x, %d sectors @ %d kB = %d kB\n", + DEV_NO(dev), dev->base, + dev->sectors, + 1 << (dev->lgSectorSize - 10), + dev->sectors << (dev->lgSectorSize - 10)); + + len = 1 << dev->lgSectorSize; + + printf("flashDiag: Erasing\n"); + + if (flashErase(dev) == ERROR) { + printf("flashDiag: Erase failed\n"); + goto done; + } + printf("%d bytes requested ...\n", len); + buf = malloc(len); + printf("allocated %d bytes ...\n", len); + if (buf == 0) { + printf("flashDiag: Out of memory\n"); + goto done; + } + + /* + * Write unique counting pattern to each sector + */ + + for (sector = 0; sector < dev->sectors; sector++) { + printf("flashDiag: Write sector %d\n", sector); + + for (i = 0; i < len / 4; i++) + buf[i] = sector << 24 | i; + + if (flashWrite(dev, + sector << dev->lgSectorSize, + (char *) buf, + len) == ERROR) { + printf("flashDiag: Write failed (dev: %d, sector: %d)\n", + DEV_NO(dev), sector); + goto done; + } + } + + /* + * Verify + */ + + for (sector = 0; sector < dev->sectors; sector++) { + printf("flashDiag: Verify sector %d\n", sector); + + if (flashRead(dev, + sector << dev->lgSectorSize, + (char *) buf, + len) == ERROR) { + printf("flashDiag: Read failed (dev: %d, sector: %d)\n", + DEV_NO(dev), sector); + goto done; + } + + for (i = 0; i < len / 4; i++) { + if (buf[i] != (sector << 24 | i)) { + printf("flashDiag: Verify error " + "(dev: %d, sector: %d, offset: 0x%x)\n", + DEV_NO(dev), sector, i); + printf("flashDiag: Expected 0x%08x, got 0x%08x\n", + sector << 24 | i, buf[i]); + + goto done; + } + } + } + + printf("flashDiag: Erasing\n"); + + if (flashErase(dev) == ERROR) { + printf("flashDiag: Final erase failed\n"); + goto done; + } + + rv = OK; + + done: + if (buf) + free(buf); + + if (rv == OK) + printf("flashDiag: Device %d passed\n", DEV_NO(dev)); + else + printf("flashDiag: Device %d failed\n", DEV_NO(dev)); + + return rv; +} + +STATUS flashDiagAll(void) +{ + int i; + int rv = OK; + + PRINTF("flashDiagAll: devices=%d\n", flashDevCount); + + for (i = 0; i < flashDevCount; i++) { + flash_dev_t *dev = &flashDev[i]; + + if (dev->found && flashDiag(dev) == ERROR) + rv = ERROR; + } + + if (rv == OK) + printf("flashDiagAll: Passed\n"); + else + printf("flashDiagAll: Failed because of earlier errors\n"); + + return OK; +} + + +/*----------------------------------------------------------------------- + */ +unsigned long flash_init (void) +{ + unsigned long size = 0; + flash_dev_t *dev = NULL; + flashLibInit(); + + /* + * Provide info for FLASH (up to 960K) of Kernel Image data. + */ + dev = FLASH_DEV_BANK0_LOW; + flash_info[FLASH_BANK_KERNEL].flash_id = + (dev->vendorID << 16) | dev->deviceID; + flash_info[FLASH_BANK_KERNEL].sector_count = dev->sectors; + flash_info[FLASH_BANK_KERNEL].size = + flash_info[FLASH_BANK_KERNEL].sector_count * FLASH_SECTOR_SIZE; + flash_info[FLASH_BANK_KERNEL].start[FIRST_SECTOR] = dev->base; + size += flash_info[FLASH_BANK_KERNEL].size; + + /* + * Provide info for 512K PLCC FLASH ROM (U-Boot) + */ + dev = FLASH_DEV_BANK0_BOOT; + flash_info[FLASH_BANK_BOOT].flash_id = + (dev->vendorID << 16) | dev->deviceID; + flash_info[FLASH_BANK_BOOT].sector_count = dev->sectors; + flash_info[FLASH_BANK_BOOT].size = + flash_info[FLASH_BANK_BOOT].sector_count * FLASH_SECTOR_SIZE; + flash_info[FLASH_BANK_BOOT].start[FIRST_SECTOR] = dev->base; + size += flash_info[FLASH_BANK_BOOT].size; + + + /* + * Provide info for 512K FLASH0 segment (U-Boot) + */ + dev = FLASH_DEV_BANK0_HIGH; + flash_info[FLASH_BANK_AUX].flash_id = + (dev->vendorID << 16) | dev->deviceID; + flash_info[FLASH_BANK_AUX].sector_count = dev->sectors; + flash_info[FLASH_BANK_AUX].size = + flash_info[FLASH_BANK_AUX].sector_count * FLASH_SECTOR_SIZE; + flash_info[FLASH_BANK_AUX].start[FIRST_SECTOR] = dev->base; + size += flash_info[FLASH_BANK_AUX].size; + + + return size; +} + +/* + * Get flash device from U-Boot flash info. + */ +flash_dev_t* +getFlashDevFromInfo(flash_info_t* info) +{ + int i; + + if(!info) + return NULL; + + for (i = 0; i < flashDevCount; i++) { + flash_dev_t *dev = &flashDev[i]; + if(dev->found && (dev->base == info->start[0])) + return dev; + } + printf("ERROR: notice, no FLASH mapped at address 0x%x\n", + (unsigned int)info->start[0]); + return NULL; +} + +ulong +flash_get_size (vu_long *addr, flash_info_t *info) +{ + int i; + for(i = 0; i < flashDevCount; i++) { + flash_dev_t *dev = &flashDev[i]; + if(dev->found){ + if(dev->base == (unsigned int)addr){ + info->flash_id = (dev->vendorID << 16) | dev->deviceID; + info->sector_count = dev->sectors; + info->size = info->sector_count * FLASH_SECTOR_SIZE; + return dev->sectors * FLASH_SECTOR_SIZE; + } + } + } + return 0; +} + +void +flash_print_info (flash_info_t *info) +{ + int i; + unsigned int chip; + + if (info->flash_id == FLASH_UNKNOWN) { + printf ("missing or unknown FLASH type\n"); + return; + } + + switch ((info->flash_id >> 16) & 0xff) { + case 0x1: + printf ("AMD "); + break; + default: + printf ("Unknown Vendor "); + break; + } + chip = (unsigned int) info->flash_id & 0x000000ff; + + switch (chip) { + + case AMD_ID_F040B: + printf ("AM29F040B (4 Mbit)\n"); + break; + + case AMD_ID_LV160B: + case FLASH_AM160LV: + case 0x49: + printf ("AM29LV160B (16 Mbit / 2M x 8bit)\n"); + break; + + default: + printf ("Unknown Chip Type:0x%x\n", chip); + break; + } + + printf (" Size: %ld bytes in %d Sectors\n", + info->size, info->sector_count); + + printf (" Sector Start Addresses:"); + for (i=0; isector_count; ++i) { + if ((i % 5) == 0) + printf ("\n "); + printf (" %08lX%s", + info->start[FIRST_SECTOR] + i*FLASH_SECTOR_SIZE, + info->protect[i] ? " (RO)" : " " + ); + } + printf ("\n"); +} + + +/* + * Erase a range of flash sectors. + */ +int flash_erase (flash_info_t *info, int s_first, int s_last) +{ + vu_long *addr = (vu_long*)(info->start[0]); + int prot, sect, l_sect; + flash_dev_t* dev = NULL; + + if ((s_first < 0) || (s_first > s_last)) { + if (info->flash_id == FLASH_UNKNOWN) { + printf ("- missing\n"); + } else { + printf ("- no sectors to erase\n"); + } + return 1; + } + + prot = 0; + for (sect = s_first; sect <= s_last; sect++) { + if (info->protect[sect]) { + prot++; + } + } + + if (prot) { + printf ("- Warning: %d protected sectors will not be erased!\n", + prot); + } else { + printf ("\n"); + } + + l_sect = -1; + + /* Start erase on unprotected sectors */ + dev = getFlashDevFromInfo(info); + if(dev){ + printf("Erase FLASH[%s] -%d sectors:", dev->name, dev->sectors); + for (sect = s_first; sect<=s_last; sect++) { + if (info->protect[sect] == 0) { /* not protected */ + addr = (vu_long*)(dev->base); + /* printf("erase_sector: sector=%d, addr=0x%x\n", + sect, addr); */ + printf("."); + if(ERROR == flashEraseSector(dev, sect)){ + printf("ERROR: could not erase sector %d on FLASH[%s]\n", + sect, dev->name); + return 1; + } + } + } + } + printf (" done\n"); + return 0; +} + +/*----------------------------------------------------------------------- + * Write a word to Flash, returns: + * 0 - OK + * 1 - write timeout + * 2 - Flash not erased + */ +static int +write_word (flash_info_t *info, ulong dest, ulong data) +{ + + flash_dev_t* dev = getFlashDevFromInfo(info); + int addr = dest - info->start[0]; + + if (! dev) + return 1; + + if(OK != flashWrite(dev, addr, (char*)&data, sizeof(ulong))){ + printf("ERROR: could not write to addr=0x%x, data=0x%x\n", + (unsigned int)addr, (unsigned)data); + return 1; + } + + if((addr % FLASH_SECTOR_SIZE) == 0) + printf("."); + + + PRINTF("write_word:0x%x, base=0x%x, addr=0x%x, data=0x%x\n", + (unsigned)info->start[0], + (unsigned)dest, + (unsigned)(dest - info->start[0]), + (unsigned)data); + + + + return (0); +} + + +/*----------------------------------------------------------------------- + * Copy memory to flash, returns: + * 0 - OK + * 1 - write timeout + * 2 - Flash not erased + */ + +int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) +{ + ulong cp, wp, data; + int i, l, rc; + flash_dev_t* dev = getFlashDevFromInfo(info); + + if( dev ) { + printf("FLASH[%s]:", dev->name); + wp = (addr & ~3); /* get lower word aligned address */ + + /* + * handle unaligned start bytes + */ + if ((l = addr - wp) != 0) { + data = 0; + for (i=0, cp=wp; i0; ++i) { + data = (data << 8) | *src++; + --cnt; + ++cp; + } + for (; cnt==0 && i<4; ++i, ++cp) { + data = (data << 8) | (*(uchar *)cp); + } + if ((rc = write_word(info, wp, data)) != 0) { + return (rc); + } + wp += 4; + } + + /* + * handle word aligned part + */ + while (cnt >= 4) { + data = 0; + for (i=0; i<4; ++i) { + data = (data << 8) | *src++; + } + if ((rc = write_word(info, wp, data)) != 0) { + return (rc); + } + wp += 4; + cnt -= 4; + } + + if (cnt == 0) { + return (0); + } + + /* + * handle unaligned tail bytes + */ + data = 0; + for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) { + data = (data << 8) | *src++; + --cnt; + } + for (; i<4; ++i, ++cp) { + data = (data << 8) | (*(uchar *)cp); + } + + return (write_word(info, wp, data)); + } + return 1; +} + +/*----------------------------------------------------------------------- + */ diff --git a/board/mousse/m48t59y.c b/board/mousse/m48t59y.c new file mode 100644 index 0000000000..7205a96362 --- /dev/null +++ b/board/mousse/m48t59y.c @@ -0,0 +1,323 @@ +/* + * SGS M48-T59Y TOD/NVRAM Driver + * + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * (C) Copyright 1999, by Curt McDowell, 08-06-99, Broadcom Corp. + * + * (C) Copyright 2001, James Dougherty, 07/18/01, Broadcom Corp. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * SGS M48-T59Y TOD/NVRAM Driver + * + * The SGS M48 an 8K NVRAM starting at offset M48_BASE_ADDR and + * continuing for 8176 bytes. After that starts the Time-Of-Day (TOD) + * registers which are used to set/get the internal date/time functions. + * + * This module implements Y2K compliance by taking full year numbers + * and translating back and forth from the TOD 2-digit year. + * + * NOTE: for proper interaction with an operating system, the TOD should + * be used to store Universal Coordinated Time (GMT) and timezone + * conversions should be used. + * + * Here is a diagram of the memory layout: + * + * +---------------------------------------------+ 0xffe0a000 + * | Non-volatile memory | . + * | | . + * | (8176 bytes of Non-volatile memory) | . + * | | . + * +---------------------------------------------+ 0xffe0bff0 + * | Flags | + * +---------------------------------------------+ 0xffe0bff1 + * | Unused | + * +---------------------------------------------+ 0xffe0bff2 + * | Alarm Seconds | + * +---------------------------------------------+ 0xffe0bff3 + * | Alarm Minutes | + * +---------------------------------------------+ 0xffe0bff4 + * | Alarm Date | + * +---------------------------------------------+ 0xffe0bff5 + * | Interrupts | + * +---------------------------------------------+ 0xffe0bff6 + * | WatchDog | + * +---------------------------------------------+ 0xffe0bff7 + * | Calibration | + * +---------------------------------------------+ 0xffe0bff8 + * | Seconds | + * +---------------------------------------------+ 0xffe0bff9 + * | Minutes | + * +---------------------------------------------+ 0xffe0bffa + * | Hours | + * +---------------------------------------------+ 0xffe0bffb + * | Day | + * +---------------------------------------------+ 0xffe0bffc + * | Date | + * +---------------------------------------------+ 0xffe0bffd + * | Month | + * +---------------------------------------------+ 0xffe0bffe + * | Year (2 digits only) | + * +---------------------------------------------+ 0xffe0bfff + */ +#include +#include +#include "mousse.h" + +/* + * Imported from mousse.h: + * + * TOD_REG_BASE Base of m48t59y TOD registers + * SYS_TOD_UNPROTECT() Disable NVRAM write protect + * SYS_TOD_PROTECT() Re-enable NVRAM write protect + */ + +#define YEAR 0xf +#define MONTH 0xe +#define DAY 0xd +#define DAY_OF_WEEK 0xc +#define HOUR 0xb +#define MINUTE 0xa +#define SECOND 0x9 +#define CONTROL 0x8 +#define WATCH 0x7 +#define INTCTL 0x6 +#define WD_DATE 0x5 +#define WD_HOUR 0x4 +#define WD_MIN 0x3 +#define WD_SEC 0x2 +#define _UNUSED 0x1 +#define FLAGS 0x0 + +#define M48_ADDR ((volatile unsigned char *) TOD_REG_BASE) + +int m48_tod_init(void) +{ + SYS_TOD_UNPROTECT(); + + M48_ADDR[CONTROL] = 0; + M48_ADDR[WATCH] = 0; + M48_ADDR[INTCTL] = 0; + + /* + * If the oscillator is currently stopped (as on a new part shipped + * from the factory), start it running. + * + * Here is an example of the TOD bytes on a brand new M48T59Y part: + * 00 00 00 00 00 00 00 00 00 88 8c c3 bf c8 f5 01 + */ + + if (M48_ADDR[SECOND] & 0x80) + M48_ADDR[SECOND] = 0; + + /* Is battery low */ + if ( M48_ADDR[FLAGS] & 0x10) { + printf("NOTICE: Battery low on Real-Time Clock (replace SNAPHAT).\n"); + } + + SYS_TOD_PROTECT(); + + return 0; +} + +/* + * m48_tod_set + */ + +static int to_bcd(int value) +{ + return value / 10 * 16 + value % 10; +} + +static int from_bcd(int value) +{ + return value / 16 * 10 + value % 16; +} + +static int day_of_week(int y, int m, int d) /* 0-6 ==> Sun-Sat */ +{ + static int t[] = {0, 3, 2, 5, 0, 3, 5, 1, 4, 6, 2, 4}; + y -= m < 3; + return (y + y/4 - y/100 + y/400 + t[m-1] + d) % 7; +} + +/* + * Note: the TOD should store the current GMT + */ + +int m48_tod_set(int year, /* 1980-2079 */ + int month, /* 01-12 */ + int day, /* 01-31 */ + int hour, /* 00-23 */ + int minute, /* 00-59 */ + int second) /* 00-59 */ + +{ + SYS_TOD_UNPROTECT(); + + M48_ADDR[CONTROL] |= 0x80; /* Set WRITE bit */ + + M48_ADDR[YEAR] = to_bcd(year % 100); + M48_ADDR[MONTH] = to_bcd(month); + M48_ADDR[DAY] = to_bcd(day); + M48_ADDR[DAY_OF_WEEK] = day_of_week(year, month, day) + 1; + M48_ADDR[HOUR] = to_bcd(hour); + M48_ADDR[MINUTE] = to_bcd(minute); + M48_ADDR[SECOND] = to_bcd(second); + + M48_ADDR[CONTROL] &= ~0x80; /* Clear WRITE bit */ + + SYS_TOD_PROTECT(); + + return 0; +} + +/* + * Note: the TOD should store the current GMT + */ + +int m48_tod_get(int *year, /* 1980-2079 */ + int *month, /* 01-12 */ + int *day, /* 01-31 */ + int *hour, /* 00-23 */ + int *minute, /* 00-59 */ + int *second) /* 00-59 */ +{ + int y; + + SYS_TOD_UNPROTECT(); + + M48_ADDR[CONTROL] |= 0x40; /* Set READ bit */ + + y = from_bcd(M48_ADDR[YEAR]); + *year = y < 80 ? 2000 + y : 1900 + y; + *month = from_bcd(M48_ADDR[MONTH]); + *day = from_bcd(M48_ADDR[DAY]); + /* day_of_week = M48_ADDR[DAY_OF_WEEK] & 0xf; */ + *hour = from_bcd(M48_ADDR[HOUR]); + *minute = from_bcd(M48_ADDR[MINUTE]); + *second = from_bcd(M48_ADDR[SECOND] & 0x7f); + + M48_ADDR[CONTROL] &= ~0x40; /* Clear READ bit */ + + SYS_TOD_PROTECT(); + + return 0; +} + +int m48_tod_get_second(void) +{ + return from_bcd(M48_ADDR[SECOND] & 0x7f); +} + +/* + * Watchdog function + * + * If usec is 0, the watchdog timer is disarmed. + * + * If usec is non-zero, the watchdog timer is armed (or re-armed) for + * approximately usec microseconds (if the exact requested usec is + * not supported by the chip, the next higher available value is used). + * + * Minimum watchdog timeout = 62500 usec + * Maximum watchdog timeout = 124 sec (124000000 usec) + */ + +void m48_watchdog_arm(int usec) +{ + int mpy, res; + + SYS_TOD_UNPROTECT(); + + if (usec == 0) { + res = 0; + mpy = 0; + } else if (usec < 2000000) { /* Resolution: 1/16s if below 2s */ + res = 0; + mpy = (usec + 62499) / 62500; + } else if (usec < 8000000) { /* Resolution: 1/4s if below 8s */ + res = 1; + mpy = (usec + 249999) / 250000; + } else if (usec < 32000000) { /* Resolution: 1s if below 32s */ + res = 2; + mpy = (usec + 999999) / 1000000; + } else { /* Resolution: 4s up to 124s */ + res = 3; + mpy = (usec + 3999999) / 4000000; + if (mpy > 31) + mpy = 31; + } + + M48_ADDR[WATCH] = (0x80 | /* Steer to RST signal (IRQ = N/C) */ + mpy << 2 | + res); + + SYS_TOD_PROTECT(); +} + +/* + * U-Boot RTC support. + */ +void +rtc_get( struct rtc_time *tmp ) +{ + m48_tod_get(&tmp->tm_year, + &tmp->tm_mon, + &tmp->tm_mday, + &tmp->tm_hour, + &tmp->tm_min, + &tmp->tm_sec); + tmp->tm_yday = 0; + tmp->tm_isdst= 0; + +#ifdef RTC_DEBUG + printf( "Get DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n", + tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday, + tmp->tm_hour, tmp->tm_min, tmp->tm_sec ); +#endif +} + +void +rtc_set( struct rtc_time *tmp ) +{ + m48_tod_set(tmp->tm_year, /* 1980-2079 */ + tmp->tm_mon, /* 01-12 */ + tmp->tm_mday, /* 01-31 */ + tmp->tm_hour, /* 00-23 */ + tmp->tm_min, /* 00-59 */ + tmp->tm_sec); /* 00-59 */ + +#ifdef RTC_DEBUG + printf( "Set DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n", + tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday, + tmp->tm_hour, tmp->tm_min, tmp->tm_sec); +#endif + +} + +void +rtc_reset (void) +{ + m48_tod_init(); +} + diff --git a/board/pm826/flash.c b/board/pm826/flash.c new file mode 100644 index 0000000000..4d5147bf78 --- /dev/null +++ b/board/pm826/flash.c @@ -0,0 +1,377 @@ +/* + * (C) Copyright 2001, 2002 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Flash Routines for Intel devices + * + *-------------------------------------------------------------------- + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include + + +flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; + +/*----------------------------------------------------------------------- + */ +ulong flash_get_size (volatile unsigned long *baseaddr, + flash_info_t * info) +{ + short i; + unsigned long flashtest_h, flashtest_l; + + info->sector_count = info->size = 0; + info->flash_id = FLASH_UNKNOWN; + + /* Write query command sequence and test FLASH answer + */ + baseaddr[0] = 0x00980098; + baseaddr[1] = 0x00980098; + + flashtest_h = baseaddr[0]; /* manufacturer ID */ + flashtest_l = baseaddr[1]; + + if (flashtest_h != INTEL_MANUFACT || flashtest_l != INTEL_MANUFACT) + return (0); /* no or unknown flash */ + + flashtest_h = baseaddr[2]; /* device ID */ + flashtest_l = baseaddr[3]; + + if (flashtest_h != flashtest_l) + return (0); + + switch (flashtest_h) { + case INTEL_ID_28F160C3B: + info->flash_id = FLASH_28F160C3B; + info->sector_count = 39; + info->size = 0x00800000; /* 4 * 2 MB = 8 MB */ + break; + case INTEL_ID_28F160F3B: + info->flash_id = FLASH_28F160F3B; + info->sector_count = 39; + info->size = 0x00800000; /* 4 * 2 MB = 8 MB */ + break; + default: + return (0); /* no or unknown flash */ + } + + info->flash_id |= INTEL_MANUFACT << 16; /* set manufacturer offset */ + + if (info->flash_id & FLASH_BTYPE) { + volatile unsigned long *tmp = baseaddr; + + /* set up sector start adress table (bottom sector type) + * AND unlock the sectors (if our chip is 160C3) + */ + for (i = 0; i < info->sector_count; i++) { + if ((info->flash_id & FLASH_TYPEMASK) == FLASH_28F160C3B) { + tmp[0] = 0x00600060; + tmp[1] = 0x00600060; + tmp[0] = 0x00D000D0; + tmp[1] = 0x00D000D0; + } + info->start[i] = (uint) tmp; + tmp += i < 8 ? 0x2000 : 0x10000; /* pointer arith */ + } + } + + memset (info->protect, 0, info->sector_count); + + baseaddr[0] = 0x00FF00FF; + baseaddr[1] = 0x00FF00FF; + + return (info->size); +} + +/*----------------------------------------------------------------------- + */ +unsigned long flash_init (void) +{ + unsigned long size_b0 = 0; + int i; + + /* Init: no FLASHes known + */ + for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) { + flash_info[i].flash_id = FLASH_UNKNOWN; + } + + /* Static FLASH Bank configuration here (only one bank) */ + + size_b0 = flash_get_size ((ulong *) CFG_FLASH0_BASE, &flash_info[0]); + if (flash_info[0].flash_id == FLASH_UNKNOWN || size_b0 == 0) { + printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n", + size_b0, size_b0 >> 20); + } + + /* protect monitor and environment sectors + */ + +#ifndef CONFIG_BOOT_ROM + /* If U-Boot is booted from ROM the CFG_MONITOR_BASE > CFG_FLASH0_BASE + * but we shouldn't protect it. + */ + +# if CFG_MONITOR_BASE >= CFG_FLASH0_BASE + flash_protect (FLAG_PROTECT_SET, + CFG_MONITOR_BASE, + CFG_MONITOR_BASE + CFG_MONITOR_LEN - 1, &flash_info[0] + ); +# endif +#endif /* CONFIG_BOOT_ROM */ + +#if (CFG_ENV_IS_IN_FLASH == 1) && defined(CFG_ENV_ADDR) +# ifndef CFG_ENV_SIZE +# define CFG_ENV_SIZE CFG_ENV_SECT_SIZE +# endif + flash_protect (FLAG_PROTECT_SET, + CFG_ENV_ADDR, + CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]); +#endif + + return (size_b0); +} + +/*----------------------------------------------------------------------- + */ +void flash_print_info (flash_info_t * info) +{ + int i; + + if (info->flash_id == FLASH_UNKNOWN) { + printf ("missing or unknown FLASH type\n"); + return; + } + + switch ((info->flash_id >> 16) & 0xff) { + case 0x89: + printf ("INTEL "); + break; + default: + printf ("Unknown Vendor "); + break; + } + + switch (info->flash_id & FLASH_TYPEMASK) { + case FLASH_28F160C3B: + printf ("28F160C3B (16 M, bottom sector)\n"); + break; + case FLASH_28F160F3B: + printf ("28F160F3B (16 M, bottom sector)\n"); + break; + default: + printf ("Unknown Chip Type\n"); + break; + } + + printf (" Size: %ld MB in %d Sectors\n", + info->size >> 20, info->sector_count); + + printf (" Sector Start Addresses:"); + for (i = 0; i < info->sector_count; ++i) { + if ((i % 5) == 0) + printf ("\n "); + printf (" %08lX%s", + info->start[i], + info->protect[i] ? " (RO)" : " " + ); + } + printf ("\n"); +} + +/*----------------------------------------------------------------------- + */ +int flash_erase (flash_info_t * info, int s_first, int s_last) +{ + int flag, prot, sect; + ulong start, now, last; + + if ((s_first < 0) || (s_first > s_last)) { + if (info->flash_id == FLASH_UNKNOWN) { + printf ("- missing\n"); + } else { + printf ("- no sectors to erase\n"); + } + return 1; + } + + prot = 0; + for (sect = s_first; sect <= s_last; sect++) { + if (info->protect[sect]) + prot++; + } + + if (prot) { + printf ("- Warning: %d protected sectors will not be erased!\n", + prot); + } else { + printf ("\n"); + } + + /* Start erase on unprotected sectors + */ + for (sect = s_first; sect <= s_last; sect++) { + volatile ulong *addr = + (volatile unsigned long *) info->start[sect]; + + start = get_timer (0); + last = start; + if (info->protect[sect] == 0) { + /* Disable interrupts which might cause a timeout here + */ + flag = disable_interrupts (); + + /* Erase the block + */ + addr[0] = 0x00200020; + addr[1] = 0x00200020; + addr[0] = 0x00D000D0; + addr[1] = 0x00D000D0; + + /* re-enable interrupts if necessary + */ + if (flag) + enable_interrupts (); + + /* wait at least 80us - let's wait 1 ms + */ + udelay (1000); + + last = start; + while ((addr[0] & 0x00800080) != 0x00800080 || + (addr[1] & 0x00800080) != 0x00800080) { + if ((now = get_timer (start)) > CFG_FLASH_ERASE_TOUT) { + printf ("Timeout (erase suspended!)\n"); + /* Suspend erase + */ + addr[0] = 0x00B000B0; + addr[1] = 0x00B000B0; + goto DONE; + } + /* show that we're waiting + */ + if ((now - last) > 1000) { /* every second */ + serial_putc ('.'); + last = now; + } + } + if (addr[0] & 0x00220022 || addr[1] & 0x00220022) { + printf ("*** ERROR: erase failed!\n"); + goto DONE; + } + } + /* Clear status register and reset to read mode + */ + addr[0] = 0x00500050; + addr[1] = 0x00500050; + addr[0] = 0x00FF00FF; + addr[1] = 0x00FF00FF; + } + + printf (" done\n"); + +DONE: + return 0; +} + +static int write_word (flash_info_t *, volatile unsigned long *, ulong); + +/*----------------------------------------------------------------------- + * Copy memory to flash, returns: + * 0 - OK + * 1 - write timeout + * 2 - Flash not erased + */ +int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) +{ + ulong v; + int i, l, cc = cnt, res = 0; + + + for (v=0; cc > 0; addr += 4, cc -= 4 - l) { + l = (addr & 3); + addr &= ~3; + + for (i = 0; i < 4; i++) { + v = (v << 8) + (i < l || i - l >= cc ? + *((unsigned char *) addr + i) : *src++); + } + + if ((res = write_word (info, (volatile unsigned long *) addr, v)) != 0) + break; + } + + return (res); +} + +/*----------------------------------------------------------------------- + * Write a word to Flash, returns: + * 0 - OK + * 1 - write timeout + * 2 - Flash not erased + */ +static int write_word (flash_info_t * info, volatile unsigned long *addr, + ulong data) +{ + int flag, res = 0; + ulong start; + + /* Check if Flash is (sufficiently) erased + */ + if ((*addr & data) != data) + return (2); + + /* Disable interrupts which might cause a timeout here + */ + flag = disable_interrupts (); + + *addr = 0x00400040; + *addr = data; + + /* re-enable interrupts if necessary + */ + if (flag) + enable_interrupts (); + + start = get_timer (0); + while ((*addr & 0x00800080) != 0x00800080) { + if (get_timer (start) > CFG_FLASH_WRITE_TOUT) { + /* Suspend program + */ + *addr = 0x00B000B0; + res = 1; + goto OUT; + } + } + + if (*addr & 0x00220022) { + printf ("*** ERROR: program failed!\n"); + res = 1; + } + +OUT: + /* Clear status register and reset to read mode + */ + *addr = 0x00500050; + *addr = 0x00FF00FF; + + return (res); +} diff --git a/board/sacsng/flash.c b/board/sacsng/flash.c new file mode 100644 index 0000000000..4fd04dfc06 --- /dev/null +++ b/board/sacsng/flash.c @@ -0,0 +1,523 @@ +/* + * (C) Copyright 2001 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include + + +#undef DEBUG + +#ifndef CFG_ENV_ADDR +#define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_ENV_OFFSET) +#endif +#ifndef CFG_ENV_SIZE +#define CFG_ENV_SIZE CFG_ENV_SECT_SIZE +#endif + + +flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ + +/*----------------------------------------------------------------------- + * Functions + */ +static ulong flash_get_size (vu_short *addr, flash_info_t *info); +static int write_word (flash_info_t *info, ulong dest, ulong data); + +/*----------------------------------------------------------------------- + */ + +unsigned long flash_init (void) +{ + unsigned long size_b0, size_b1; + int i; + + /* Init: no FLASHes known */ + for (i=0; i= CFG_FLASH_BASE + /* monitor protection ON by default */ + flash_protect(FLAG_PROTECT_SET, + CFG_MONITOR_BASE, + CFG_MONITOR_BASE+CFG_MONITOR_LEN-1, + &flash_info[0]); +#endif + +#ifdef CFG_ENV_IS_IN_FLASH + /* ENV protection ON by default */ + flash_protect(FLAG_PROTECT_SET, + CFG_ENV_ADDR, + CFG_ENV_ADDR+CFG_ENV_SIZE-1, + &flash_info[0]); +#endif + + if (size_b1) { +#if CFG_MONITOR_BASE >= CFG_FLASH_BASE + /* monitor protection ON by default */ + flash_protect(FLAG_PROTECT_SET, + CFG_MONITOR_BASE, + CFG_MONITOR_BASE+CFG_MONITOR_LEN-1, + &flash_info[1]); +#endif + +#ifdef CFG_ENV_IS_IN_FLASH + /* ENV protection ON by default */ + flash_protect(FLAG_PROTECT_SET, + CFG_ENV_ADDR, + CFG_ENV_ADDR+CFG_ENV_SIZE-1, + &flash_info[1]); +#endif + } else { + flash_info[1].flash_id = FLASH_UNKNOWN; + flash_info[1].sector_count = -1; + } + + flash_info[0].size = size_b0; + flash_info[1].size = size_b1; + + /* + * We only report the primary flash for U-Boot's use. + */ + return (size_b0); +} + +/*----------------------------------------------------------------------- + */ +void flash_print_info (flash_info_t *info) +{ + int i; + + if (info->flash_id == FLASH_UNKNOWN) { + printf ("missing or unknown FLASH type\n"); + return; + } + + switch (info->flash_id & FLASH_VENDMASK) { + case FLASH_MAN_AMD: printf ("AMD "); break; + case FLASH_MAN_FUJ: printf ("FUJITSU "); break; + default: printf ("Unknown Vendor "); break; + } + + switch (info->flash_id & FLASH_TYPEMASK) { + case FLASH_AM400B: printf ("AM29LV400B (4 Mbit, bottom boot sect)\n"); + break; + case FLASH_AM400T: printf ("AM29LV400T (4 Mbit, top boot sector)\n"); + break; + case FLASH_AM800B: printf ("AM29LV800B (8 Mbit, bottom boot sect)\n"); + break; + case FLASH_AM800T: printf ("AM29LV800T (8 Mbit, top boot sector)\n"); + break; + case FLASH_AM160B: printf ("AM29LV160B (16 Mbit, bottom boot sect)\n"); + break; + case FLASH_AM160T: printf ("AM29LV160T (16 Mbit, top boot sector)\n"); + break; + case FLASH_AM320B: printf ("AM29LV320B (32 Mbit, bottom boot sect)\n"); + break; + case FLASH_AM320T: printf ("AM29LV320T (32 Mbit, top boot sector)\n"); + break; + default: printf ("Unknown Chip Type\n"); + break; + } + + printf (" Size: %ld MB in %d Sectors\n", + info->size >> 20, info->sector_count); + + printf (" Sector Start Addresses:"); + for (i=0; isector_count; ++i) { + if ((i % 5) == 0) + printf ("\n "); + printf (" %08lX%s", + info->start[i], + info->protect[i] ? " (RO)" : " " + ); + } + printf ("\n"); + return; +} + +/*----------------------------------------------------------------------- + */ + + +/*----------------------------------------------------------------------- + */ + +/* + * The following code cannot be run from FLASH! + */ + +static ulong flash_get_size (vu_short *addr, flash_info_t *info) +{ + short i; + ushort value; + ulong base = (ulong)addr; + + /* Write auto select command: read Manufacturer ID */ + addr[0x0555] = 0xAAAA; + addr[0x02AA] = 0x5555; + addr[0x0555] = 0x9090; + __asm__ __volatile__(" sync\n "); + + value = addr[0]; +#ifdef DEBUG + printf("Flash manufacturer 0x%04X\n", value); +#endif + + if(value == (ushort)AMD_MANUFACT) { + info->flash_id = FLASH_MAN_AMD; + } else if (value == (ushort)FUJ_MANUFACT) { + info->flash_id = FLASH_MAN_FUJ; + } else { +#ifdef DEBUG + printf("Unknown flash manufacturer 0x%04X\n", value); +#endif + info->flash_id = FLASH_UNKNOWN; + info->sector_count = 0; + info->size = 0; + return (0); /* no or unknown flash */ + } + + value = addr[1]; /* device ID */ +#ifdef DEBUG + printf("Flash type 0x%04X\n", value); +#endif + + if(value == (ushort)AMD_ID_LV400T) { + info->flash_id += FLASH_AM400T; + info->sector_count = 11; + info->size = 0x00080000; /* => 0.5 MB */ + } else if(value == (ushort)AMD_ID_LV400B) { + info->flash_id += FLASH_AM400B; + info->sector_count = 11; + info->size = 0x00080000; /* => 0.5 MB */ + } else if(value == (ushort)AMD_ID_LV800T) { + info->flash_id += FLASH_AM800T; + info->sector_count = 19; + info->size = 0x00100000; /* => 1 MB */ + } else if(value == (ushort)AMD_ID_LV800B) { + info->flash_id += FLASH_AM800B; + info->sector_count = 19; + info->size = 0x00100000; /* => 1 MB */ + } else if(value == (ushort)AMD_ID_LV160T) { + info->flash_id += FLASH_AM160T; + info->sector_count = 35; + info->size = 0x00200000; /* => 2 MB */ + } else if(value == (ushort)AMD_ID_LV160B) { + info->flash_id += FLASH_AM160B; + info->sector_count = 35; + info->size = 0x00200000; /* => 2 MB */ + } else if(value == (ushort)AMD_ID_LV320T) { + info->flash_id += FLASH_AM320T; + info->sector_count = 67; + info->size = 0x00400000; /* => 4 MB */ + } else if(value == (ushort)AMD_ID_LV320B) { + info->flash_id += FLASH_AM320B; + info->sector_count = 67; + info->size = 0x00400000; /* => 4 MB */ + } else { +#ifdef DEBUG + printf("Unknown flash type 0x%04X\n", value); + info->size = CFG_FLASH_SIZE; +#else + info->flash_id = FLASH_UNKNOWN; + return (0); /* => no or unknown flash */ +#endif + } + + /* set up sector start address table */ + if (info->flash_id & FLASH_BTYPE) { + /* set sector offsets for bottom boot block type */ + info->start[0] = base + 0x00000000; + info->start[1] = base + 0x00004000; + info->start[2] = base + 0x00006000; + info->start[3] = base + 0x00008000; + for (i = 4; i < info->sector_count; i++) { + info->start[i] = base + ((i - 3) * 0x00010000); + } + } else { + /* set sector offsets for top boot block type */ + i = info->sector_count - 1; + info->start[i--] = base + info->size - 0x00004000; + info->start[i--] = base + info->size - 0x00006000; + info->start[i--] = base + info->size - 0x00008000; + for (; i >= 0; i--) { + info->start[i] = base + (i * 0x00010000); + } + } + + /* check for protected sectors */ + for (i = 0; i < info->sector_count; i++) { + /* read sector protection at sector address, (A7 .. A0) = 0x02 */ + /* D0 = 1 if protected */ + addr = (volatile unsigned short *)(info->start[i]); + info->protect[i] = addr[2] & 1; + } + + /* + * Prevent writes to uninitialized FLASH. + */ + if (info->flash_id != FLASH_UNKNOWN) { + addr = (volatile unsigned short *)info->start[0]; + + } + + addr[0] = 0xF0F0; /* reset bank */ + __asm__ __volatile__(" sync\n "); + return (info->size); +} + + +/*----------------------------------------------------------------------- + */ + +int flash_erase (flash_info_t *info, int s_first, int s_last) +{ + vu_short *addr = (vu_short*)(info->start[0]); + int flag, prot, sect, l_sect; + ulong start, now, last; + + if ((s_first < 0) || (s_first > s_last)) { + if (info->flash_id == FLASH_UNKNOWN) { + printf ("- missing\n"); + } else { + printf ("- no sectors to erase\n"); + } + return 1; + } + + if ((info->flash_id == FLASH_UNKNOWN) || + (info->flash_id > FLASH_AMD_COMP)) { + printf ("Can't erase unknown flash type %08lx - aborted\n", + info->flash_id); + return 1; + } + + prot = 0; + for (sect=s_first; sect<=s_last; ++sect) { + if (info->protect[sect]) { + prot++; + } + } + + if (prot) { + printf ("- Warning: %d protected sectors will not be erased!\n", + prot); + } else { + printf ("\n"); + } + + l_sect = -1; + + /* Disable interrupts which might cause a timeout here */ + flag = disable_interrupts(); + + addr[0x0555] = 0xAAAA; + addr[0x02AA] = 0x5555; + addr[0x0555] = 0x8080; + addr[0x0555] = 0xAAAA; + addr[0x02AA] = 0x5555; + __asm__ __volatile__(" sync\n "); + + /* Start erase on unprotected sectors */ + for (sect = s_first; sect<=s_last; sect++) { + if (info->protect[sect] == 0) { /* not protected */ + addr = (vu_short*)(info->start[sect]); + addr[0] = 0x3030; + l_sect = sect; + } + } + + /* re-enable interrupts if necessary */ + if (flag) + enable_interrupts(); + + /* wait at least 80us - let's wait 1 ms */ + udelay (1000); + + /* + * We wait for the last triggered sector + */ + if (l_sect < 0) + goto DONE; + + start = get_timer (0); + last = start; + addr = (vu_short*)(info->start[l_sect]); + while ((addr[0] & 0x0080) != 0x0080) { + if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) { + printf ("Timeout\n"); + addr[0] = 0xF0F0; /* reset bank */ + __asm__ __volatile__(" sync\n "); + return 1; + } + /* show that we're waiting */ + if ((now - last) > 1000) { /* every second */ + putc ('.'); + last = now; + } + } + +DONE: + /* reset to read mode */ + addr = (vu_short*)info->start[0]; + addr[0] = 0xF0F0; /* reset bank */ + __asm__ __volatile__(" sync\n "); + + printf (" done\n"); + return 0; +} + +/*----------------------------------------------------------------------- + * Copy memory to flash, returns: + * 0 - OK + * 1 - write timeout + * 2 - Flash not erased + */ + +int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) +{ + ulong cp, wp, data; + int i, l, rc; + + wp = (addr & ~3); /* get lower word aligned address */ + + /* + * handle unaligned start bytes + */ + if ((l = addr - wp) != 0) { + data = 0; + for (i=0, cp=wp; i0; ++i) { + data = (data << 8) | *src++; + --cnt; + ++cp; + } + for (; cnt==0 && i<4; ++i, ++cp) { + data = (data << 8) | (*(uchar *)cp); + } + + if ((rc = write_word(info, wp, data)) != 0) { + return (rc); + } + wp += 4; + } + + /* + * handle word aligned part + */ + while (cnt >= 4) { + data = 0; + for (i=0; i<4; ++i) { + data = (data << 8) | *src++; + } + if ((rc = write_word(info, wp, data)) != 0) { + return (rc); + } + wp += 4; + cnt -= 4; + } + + if (cnt == 0) { + return (0); + } + + /* + * handle unaligned tail bytes + */ + data = 0; + for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) { + data = (data << 8) | *src++; + --cnt; + } + for (; i<4; ++i, ++cp) { + data = (data << 8) | (*(uchar *)cp); + } + + return (write_word(info, wp, data)); +} + +/*----------------------------------------------------------------------- + * Write a word to Flash, returns: + * 0 - OK + * 1 - write timeout + * 2 - Flash not erased + */ +static int write_word (flash_info_t *info, ulong dest, ulong data) +{ + vu_short *addr = (vu_short*)(info->start[0]); + ulong start; + int flag; + int j; + + /* Check if Flash is (sufficiently) erased */ + if (((*(vu_long *)dest) & data) != data) { + return (2); + } + /* Disable interrupts which might cause a timeout here */ + flag = disable_interrupts(); + + /* The original routine was designed to write 32 bit words to + * 32 bit wide memory. We have 16 bit wide memory so we do + * two writes. We write the LSB first at dest+2 and then the + * MSB at dest (lousy big endian). + */ + dest += 2; + for(j = 0; j < 2; j++) { + addr[0x0555] = 0xAAAA; + addr[0x02AA] = 0x5555; + addr[0x0555] = 0xA0A0; + __asm__ __volatile__(" sync\n "); + + *((vu_short *)dest) = (ushort)data; + + /* re-enable interrupts if necessary */ + if (flag) + enable_interrupts(); + + /* data polling for D7 */ + start = get_timer (0); + while (*(vu_short *)dest != (ushort)data) { + if (get_timer(start) > CFG_FLASH_WRITE_TOUT) { + return (1); + } + } + dest -= 2; + data >>= 16; + } + return (0); +} + +/*----------------------------------------------------------------------- + */ diff --git a/board/sandpoint/README b/board/sandpoint/README new file mode 100644 index 0000000000..9e48168a24 --- /dev/null +++ b/board/sandpoint/README @@ -0,0 +1,15 @@ +This port of U-Boot will run on a Motorola Sandpoint 3 development +system equipped with a Unity X4 PPMC card (MPC8240 CPU) only. It is a +snapshot of work in progress and far from being completed. In order +to run it on the target system, it has to be downloaded using the +DINK32 monitor program that came with your Sandpoint system. Please +note that DINK32 does not accept the S-Record file created by the +U-Boot build process unmodified, because it contains CR/LF line +terminators. You have to strip the CR characters first. There is a +tiny script named 'dinkdl' I created for this purpose. + +The Sandpoint port is based on the work of Rob Taylor, who does not +seem to maintain it any more. I can be reached by mail as +tkoeller@gmx.net. + +Thomas Koeller diff --git a/disk/part_iso.c b/disk/part_iso.c new file mode 100644 index 0000000000..a98539da46 --- /dev/null +++ b/disk/part_iso.c @@ -0,0 +1,257 @@ +/* + * (C) Copyright 2001 + * Denis Peter, MPL AG Switzerland, d.peter@mpl.ch. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include "part_iso.h" + +#if ((CONFIG_COMMANDS & CFG_CMD_IDE) || (CONFIG_COMMANDS & CFG_CMD_SCSI)) && defined(CONFIG_ISO_PARTITION) + +#undef ISO_PART_DEBUG + +#ifdef ISO_PART_DEBUG +#define PRINTF(fmt,args...) printf (fmt ,##args) +#else +#define PRINTF(fmt,args...) +#endif + +/* enable this if CDs are written with the PowerPC Platform ID */ +#undef CHECK_FOR_POWERPC_PLATTFORM +#define CD_SECTSIZE 2048 + +static unsigned char tmpbuf[CD_SECTSIZE]; + +/* Convert char[4] in little endian format to the host format integer + */ +static inline unsigned long le32_to_int(unsigned char *le32) +{ + return ((le32[3] << 24) + + (le32[2] << 16) + + (le32[1] << 8) + + le32[0] + ); +} +/* Convert char[2] in little endian format to the host format integer + */ +static inline unsigned short le16_to_int(unsigned char *le16) +{ + return ((le16[1] << 8) + + le16[0] + ); +} + + +/* only boot records will be listed as valid partitions */ +int get_partition_info_iso_verb(block_dev_desc_t * dev_desc, int part_num, disk_partition_t * info, int verb) +{ + int i,offset,entry_num; + unsigned short *chksumbuf; + unsigned short chksum; + unsigned long newblkaddr,blkaddr,lastsect,bootaddr; + iso_boot_rec_t *pbr = (iso_boot_rec_t *)tmpbuf; /* boot record */ + iso_pri_rec_t *ppr = (iso_pri_rec_t *)tmpbuf; /* primary desc */ + iso_val_entry_t *pve = (iso_val_entry_t *)tmpbuf; + iso_init_def_entry_t *pide; + + /* the first sector (sector 0x10) must be a primary volume desc */ + blkaddr=PVD_OFFSET; + if (dev_desc->block_read (dev_desc->dev, PVD_OFFSET, 1, (ulong *) tmpbuf) != 1) + return (-1); + if(ppr->desctype!=0x01) { + if(verb) + printf ("** First descriptor is NOT a primary desc on %d:%d **\n", + dev_desc->dev, part_num); + return (-1); + } + if(strncmp(ppr->stand_ident,"CD001",5)!=0) { + if(verb) + printf ("** Wrong ISO Ident: %s on %d:%d **\n", + ppr->stand_ident,dev_desc->dev, part_num); + return (-1); + } + lastsect= ((ppr->firstsek_LEpathtab1_LE & 0x000000ff)<<24) + + ((ppr->firstsek_LEpathtab1_LE & 0x0000ff00)<< 8) + + ((ppr->firstsek_LEpathtab1_LE & 0x00ff0000)>> 8) + + ((ppr->firstsek_LEpathtab1_LE & 0xff000000)>>24) ; + info->blksz=ppr->secsize_BE; /* assuming same block size for all entries */ + PRINTF(" Lastsect:%08lx\n",lastsect); + for(i=blkaddr;iblock_read (dev_desc->dev, i, 1, (ulong *) tmpbuf) != 1) + return (-1); + if(ppr->desctype==0x00) + break; /* boot entry found */ + if(ppr->desctype==0xff) { + if(verb) + printf ("** No valid boot catalog found on %d:%d **\n", + dev_desc->dev, part_num); + return (-1); + } + } + /* boot entry found */ + if(strncmp(pbr->ident_str,"EL TORITO SPECIFICATION",23)!=0) { + if(verb) + printf ("** Wrong El Torito ident: %s on %d:%d **\n", + pbr->ident_str,dev_desc->dev, part_num); + return (-1); + } + bootaddr=le32_to_int(pbr->pointer); + PRINTF(" Boot Entry at: %08lX\n",bootaddr); + if (dev_desc->block_read (dev_desc->dev, bootaddr, 1, (ulong *) tmpbuf) != 1) { + if(verb) + printf ("** Can't read Boot Entry at %lX on %d:%d **\n", + bootaddr,dev_desc->dev, part_num); + return (-1); + } + chksum=0; + chksumbuf = (unsigned short *)tmpbuf; + for(i=0;i<0x10;i++) + chksum+=((chksumbuf[i] &0xff)<<8)+((chksumbuf[i] &0xff00)>>8); + if(chksum!=0) { + if(verb) + printf ("** Checksum Error in booting catalog validation entry on %d:%d **\n", + dev_desc->dev, part_num); + return (-1); + } + if((pve->key[0]!=0x55)||(pve->key[1]!=0xAA)) { + if(verb) + printf ("** Key 0x55 0xAA error on %d:%d **\n", + dev_desc->dev, part_num); + return(-1); + } +#ifdef CHECK_FOR_POWERPC_PLATTFORM + if(pve->platform!=0x01) { + if(verb) + printf ("** No PowerPC platform CD on %d:%d **\n", + dev_desc->dev, part_num); + return(-1); + } +#endif + /* the validation entry seems to be ok, now search the "partition" */ + entry_num=0; + offset=0x20; + sprintf (info->type, "U-Boot"); + switch(dev_desc->if_type) { + case IF_TYPE_IDE: + case IF_TYPE_ATAPI: + sprintf (info->name, "hd%c%d\n", 'a' + dev_desc->dev, part_num); + break; + case IF_TYPE_SCSI: + sprintf (info->name, "sd%c%d\n", 'a' + dev_desc->dev, part_num); + break; + case IF_TYPE_USB: + sprintf (info->name, "usbd%c%d\n", 'a' + dev_desc->dev, part_num); + break; + case IF_TYPE_DOC: + sprintf (info->name, "docd%c%d\n", 'a' + dev_desc->dev, part_num); + break; + default: + sprintf (info->name, "xx%c%d\n", 'a' + dev_desc->dev, part_num); + break; + } + /* the bootcatalog (including validation Entry) is limited to 2048Bytes + * (63 boot entries + validation entry) */ + while(offset<2048) { + pide=(iso_init_def_entry_t *)&tmpbuf[offset]; + if ((pide->boot_ind==0x88) || + (pide->boot_ind==0x00)) { /* Header Id for default Sections Entries */ + if(entry_num==part_num) { /* part found */ + goto found; + } + entry_num++; /* count partitions Entries (boot and non bootables */ + offset+=0x20; + continue; + } + if ((pide->boot_ind==0x90) || /* Section Header Entry */ + (pide->boot_ind==0x91) || /* Section Header Entry (last) */ + (pide->boot_ind==0x44)) { /* Extension Indicator */ + offset+=0x20; /* skip unused entries */ + } + else { + if(verb) + printf ("** Partition %d not found on device %d **\n", + part_num,dev_desc->dev); + return(-1); + } + } + /* if we reach this point entire sector has been + * searched w/o succsess */ + if(verb) + printf ("** Partition %d not found on device %d **\n", + part_num,dev_desc->dev); + return(-1); +found: + if(pide->boot_ind!=0x88) { + if(verb) + printf ("** Partition %d is not bootable on device %d **\n", + part_num,dev_desc->dev); + return (-1); + } + switch(pide->boot_media) { + case 0x00: /* no emulation */ + info->size=le16_to_int(pide->sec_cnt)>>2; + break; + case 0x01: info->size=2400>>2; break; /* 1.2MByte Floppy */ + case 0x02: info->size=2880>>2; break; /* 1.44MByte Floppy */ + case 0x03: info->size=5760>>2; break; /* 2.88MByte Floppy */ + case 0x04: info->size=2880>>2; break; /* dummy (HD Emulation) */ + default: info->size=0; break; + } + newblkaddr=le32_to_int(pide->rel_block_addr); + info->start=newblkaddr; + PRINTF(" part %d found @ %lx size %lx\n",part_num,newblkaddr,info->size); + return 0; +} + +int get_partition_info_iso(block_dev_desc_t * dev_desc, int part_num, disk_partition_t * info) +{ + return(get_partition_info_iso_verb(dev_desc, part_num, info, 1)); +} + + + +void print_part_iso(block_dev_desc_t * dev_desc) +{ + disk_partition_t info; + int i; + if(get_partition_info_iso_verb(dev_desc,0,&info,0)==-1) { + printf("** No boot partition found on device %d **\n",dev_desc->dev); + return; + } + printf("Part Start Sect x Size Type\n"); + i=0; + do { + printf (" %2d %8ld %8ld %6ld %.32s\n", + i, info.start, info.size, info.blksz, info.type); + i++; + } while (get_partition_info_iso_verb(dev_desc,i,&info,0)!=-1); +} + +int test_part_iso (block_dev_desc_t *dev_desc) +{ + disk_partition_t info; + + return(get_partition_info_iso_verb(dev_desc,0,&info,0)); +} + +#endif /* ((CONFIG_COMMANDS & CFG_CMD_IDE) || (CONFIG_COMMANDS & CFG_CMD_SCSI)) && defined(CONFIG_ISO_PARTITION) */ diff --git a/doc/README.OXC b/doc/README.OXC new file mode 100644 index 0000000000..e7bb76f399 --- /dev/null +++ b/doc/README.OXC @@ -0,0 +1,25 @@ +This document contains different information about the port +of U-Boot for the OXC board designed by Lucent Technologies, +Inc. + +1. Showing activity + +U-Boot for the OXC board can show its current status using +the Active LED. This feature is configured by the following +options: + +CONFIG_SHOW_ACTIVITY + + When this option is on, the Active LED is blinking fast +when U-Boot runs in the idle loop (i.e. waits for user +commands from serial console) and blinking slow when it +downloads an image over network. When U-Boot loads an image +over serial line the Active LED does not blink and its state +is random (i.e. either constant on or constant off). + +CONFIG_SHOW_BOOT_PROGRESS + + When this option is on, U-Boot switches the Active LED +off before booting an image and switches it on if booting +failed due to some reasons. + diff --git a/doc/README.autoboot b/doc/README.autoboot new file mode 100644 index 0000000000..20736ca476 --- /dev/null +++ b/doc/README.autoboot @@ -0,0 +1,158 @@ +/* + * (C) Copyright 2001 + * Dave Ellis, SIXNET, dge@sixnetio.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +Using autoboot configuration options +==================================== + +The basic autoboot configuration options are documented in the main +U-Boot README. See it for details. They are: + + bootdelay + bootcmd + CONFIG_BOOTDELAY + CONFIG_BOOTCOMMAND + +Some additional options that make autoboot safer in a production +product are documented here. + +Why use them? +------------- + +The basic autoboot feature allows a system to automatically boot to +the real application (such as Linux) without a user having to enter +any commands. If any key is pressed before the boot delay time +expires, U-Boot stops the autoboot process, gives a U-Boot prompt +and waits forever for a command. That's a good thing if you pressed a +key because you wanted to get the prompt. + +It's not so good if the key press was a stray character on the +console serial port, say because a user who knows nothing about +U-Boot pressed a key before the system had time to boot. It's even +worse on an embedded product that doesn't have a console during +normal use. The modem plugged into that console port sends a +character at the wrong time and the system hangs, with no clue as to +why it isn't working. + +You might want the system to autoboot to recover after an external +configuration program stops autoboot. If the configuration program +dies or loses its connection (modems can disconnect at the worst +time) U-Boot will patiently wait forever for it to finish. + +These additional configuration options can help provide a system that +boots when it should, but still allows access to U-Boot. + +What they do +------------ + + CONFIG_BOOT_RETRY_TIME + CONFIG_BOOT_RETRY_MIN + + bootretry environment variable + + These options determine what happens after autoboot is + stopped and U-Boot is waiting for commands. + + CONFIG_BOOT_RETRY_TIME must be defined to enable the boot + retry feature. If the environment variable 'bootretry' is + found then its value is used, otherwise the retry timeout is + CONFIG_BOOT_RETRY_TIME. CONFIG_BOOT_RETRY_MIN is optional and + defaults to CONFIG_BOOT_RETRY_TIME. All times are in seconds. + + If the retry timeout is negative, the U-Boot command prompt + never times out. Otherwise it is forced to be at least + CONFIG_BOOT_RETRY_MIN seconds. If no valid U-Boot command is + entered before the specified time the boot delay sequence is + restarted. Each command that U-Boot executes restarts the + timeout. + + If CONFIG_BOOT_RETRY_TIME < 0 the feature is there, but + doesn't do anything unless the environment variable + 'bootretry' is >= 0. + + CONFIG_AUTOBOOT_KEYED + CONFIG_AUTOBOOT_PROMPT + CONFIG_AUTOBOOT_DELAY_STR + CONFIG_AUTOBOOT_STOP_STR + CONFIG_AUTOBOOT_DELAY_STR2 + CONFIG_AUTOBOOT_STOP_STR2 + + bootdelaykey environment variable + bootstopkey environment variable + bootdelaykey2 environment variable + bootstopkey2 environment variable + + These options give more control over stopping autoboot. When + they are used a specific character or string is required to + stop or delay autoboot. + + Define CONFIG_AUTOBOOT_KEYED (no value required) to enable + this group of options. CONFIG_AUTOBOOT_DELAY_STR, + CONFIG_AUTOBOOT_STOP_STR or both should be specified (or + specified by the corresponding environment variable), + otherwise there is no way to stop autoboot. + + CONFIG_AUTOBOOT_PROMPT is displayed before the boot delay + selected by CONFIG_BOOTDELAY starts. If it is not defined + there is no output indicating that autoboot is in progress. + If "%d" is included, it is replaced by the number of seconds + remaining before autoboot will start, but it does not count + down the seconds. "autoboot in %d seconds\n" is a reasonable + prompt. + + If CONFIG_AUTOBOOT_DELAY_STR or bootdelaykey is specified and + this string is received from console input before autoboot + starts booting, U-Boot gives a command prompt. The U-Boot + prompt will time out if CONFIG_BOOT_RETRY_TIME is used, + otherwise it never times out. + + If CONFIG_AUTOBOOT_STOP_STR or bootstopkey is specified and + this string is received from console input before autoboot + starts booting, U-Boot gives a command prompt. The U-Boot + prompt never times out, even if CONFIG_BOOT_RETRY_TIME is + used. + + The string recognition is not very sophisticated. If a + partial match is detected, the first non-matching character + is checked to see if starts a new match. There is no check + for a shorter partial match, so it's best if the first + character of a key string does not appear in the rest of the + string. + + Using the CONFIG_AUTOBOOT_DELAY_STR2 / bootdelaykey2 and/or + CONFIG_AUTOBOOT_STOP_STR2 / bootstopkey #defines and/or + environment variables you can specify a second, alternate + string (which allows you to haw two "password" strings). + + CONFIG_ZERO_BOOTDELAY_CHECK + + If this option is defined, you can stop the autoboot process + by hitting a key even in that case when "bootdelay" has been + set to 0. You can set "bootdelay" to a negative value to + prevent the check for console input. + + CONFIG_RESET_TO_RETRY + + (Only effective when CONFIG_BOOT_RETRY_TIME is also set) + After the countdown timed out, the board will be reset to restart + again. + diff --git a/doc/README.console b/doc/README.console new file mode 100644 index 0000000000..6d477df75a --- /dev/null +++ b/doc/README.console @@ -0,0 +1,118 @@ +/* + * (C) Copyright 2000 + * Paolo Scaffardi, AIRVENT SAM s.p.a - RIMINI(ITALY), arsenio@tin.it + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +U-Boot console handling +======================== + +HOW THE CONSOLE WORKS? +---------------------- + +At system startup U-Boot initializes a serial console. When U-Boot +relocates itself to RAM, all console drivers are initialized (they +will register all detected console devices to the system for further +use). + +If not defined in the environment, the first input device is assigned +to the 'stdin' file, the first output one to 'stdout' and 'stderr'. + +You can use the command "coninfo" to see all registered console +devices and their flags. You can assign a standard file (stdin, +stdout or stderr) to any device you see in that list simply by +assigning its name to the corresponding environment variable. For +example: + + setenv stdin wl_kbd <- To use the wireless keyboard + setenv stdout video <- To use the video console + +Do a simple "saveenv" to save the console settings in the environment +and get them working on the next startup, too. + +HOW CAN I USE STANDARD FILE INTO THE SOURCES? +--------------------------------------------- + +You can use the following functions to access the console: + +* STDOUT: + putc (to put a char to stdout) + puts (to put a string to stdout) + printf (to format and put a string to stdout) + +* STDIN: + tstc (to test for the presence of a char in stdin) + getc (to get a char from stdin) + +* STDERR: + eputc (to put a char to stderr) + eputs (to put a string to stderr) + eprintf (to format and put a string to stderr) + +* FILE (can be 'stdin', 'stdout', 'stderr'): + fputc (like putc but redirected to a file) + fputs (like puts but redirected to a file) + fprintf (like printf but redirected to a file) + ftstc (like tstc but redirected to a file) + fgetc (like getc but redirected to a file) + +Remember that all FILE-related functions CANNOT be used before +U-Boot relocation (done in 'board_init_r' in common/board.c). + +HOW CAN I USE STANDARD FILE INTO APPLICATIONS? +---------------------------------------------- + +Use the 'bd_mon_fnc' field of the bd_t structure passed to the +application to do everything you want with the console. + +But REMEMBER that that will work only if you have not overwritten any +U-Boot code while loading (or uncompressing) the image of your +application. + +For example, you won't get the console stuff running in the Linux +kernel because the kernel overwrites U-Boot before running. Only +some parameters like the framebuffer descriptors are passed to the +kernel in the high memory area to let the applications (the kernel) +use the framebuffers initialized by U-Boot. + +SUPPORTED DRIVERS +----------------- + +Working drivers: + + serial (architecture dependent serial stuff) + video (mpc8xx video controller) + +Work in progress: + + wl_kbd (Wireless 4PPM keyboard) + +Waiting for volounteers: + + lcd (mpc8xx lcd controller; to ) + +TESTED CONFIGURATIONS +--------------------- + +The driver has been tested with the following configurations (see +CREDITS for other contact informations): + +- MPC823FADS with AD7176 on a PAL TV (YCbYCr) - arsenio@tin.it +- GENIETV with AD7177 on a PAL TV (YCbYCr) - arsenio@tin.it diff --git a/drivers/bcm570x.c b/drivers/bcm570x.c new file mode 100644 index 0000000000..a88880ad3f --- /dev/null +++ b/drivers/bcm570x.c @@ -0,0 +1,1709 @@ +/* + * Broadcom BCM570x Ethernet Driver for U-Boot. + * Support 5701, 5702, 5703, and 5704. Single instance driver. + * Copyright (C) 2002 James F. Dougherty (jfd@broadcom.com) + */ + +#include + +#if (CONFIG_COMMANDS & CFG_CMD_NET) && (!defined(CONFIG_NET_MULTI)) && \ + defined(CONFIG_BCM570x) + +#ifdef CONFIG_BMW +#include +#endif +#include +#include "bcm570x_mm.h" +#include "bcm570x_autoneg.h" +#include +#include + + + +/* + * PCI Registers and definitions. + */ +#define PCI_CMD_MASK 0xffff0000 /* mask to save status bits */ +#define PCI_ANY_ID (~0) + +/* + * PCI memory base for Ethernet device as well as device Interrupt. + */ +#define BCM570X_MBAR 0x80100000 +#define BCM570X_ILINE 1 + + + +#define SECOND_USEC 1000000 +#define MAX_PACKET_SIZE 1600 +#define MAX_UNITS 4 + +/* Globals to this module */ +int initialized = 0; +unsigned int ioBase = 0; +volatile PLM_DEVICE_BLOCK pDevice = NULL; /* 570x softc */ +volatile PUM_DEVICE_BLOCK pUmDevice = NULL; + +/* Used to pass the full-duplex flag, etc. */ +int line_speed[MAX_UNITS] = {0,0,0,0}; +static int full_duplex[MAX_UNITS] = {1,1,1,1}; +static int rx_flow_control[MAX_UNITS] = {0,0,0,0}; +static int tx_flow_control[MAX_UNITS] = {0,0,0,0}; +static int auto_flow_control[MAX_UNITS] = {0,0,0,0}; +static int tx_checksum[MAX_UNITS] = {1,1,1,1}; +static int rx_checksum[MAX_UNITS] = {1,1,1,1}; +static int auto_speed[MAX_UNITS] = {1,1,1,1}; + +#if JUMBO_FRAMES +/* Jumbo MTU for interfaces. */ +static int mtu[MAX_UNITS] = {0,0,0,0}; +#endif + +/* Turn on Wake-on lan for a device unit */ +static int enable_wol[MAX_UNITS] = {0,0,0,0}; + +#define TX_DESC_CNT DEFAULT_TX_PACKET_DESC_COUNT +static unsigned int tx_pkt_desc_cnt[MAX_UNITS] = + {TX_DESC_CNT,TX_DESC_CNT,TX_DESC_CNT, TX_DESC_CNT}; + +#define RX_DESC_CNT DEFAULT_STD_RCV_DESC_COUNT +static unsigned int rx_std_desc_cnt[MAX_UNITS] = + {RX_DESC_CNT,RX_DESC_CNT,RX_DESC_CNT,RX_DESC_CNT}; + +static unsigned int rx_adaptive_coalesce[MAX_UNITS] = {1,1,1,1}; + +#if T3_JUMBO_RCV_RCB_ENTRY_COUNT +#define JBO_DESC_CNT DEFAULT_JUMBO_RCV_DESC_COUNT +static unsigned int rx_jumbo_desc_cnt[MAX_UNITS] = + {JBO_DESC_CNT, JBO_DESC_CNT, JBO_DESC_CNT, JBO_DESC_CNT}; +#endif +#define RX_COAL_TK DEFAULT_RX_COALESCING_TICKS +static unsigned int rx_coalesce_ticks[MAX_UNITS] = + {RX_COAL_TK, RX_COAL_TK, RX_COAL_TK, RX_COAL_TK}; + +#define RX_COAL_FM DEFAULT_RX_MAX_COALESCED_FRAMES +static unsigned int rx_max_coalesce_frames[MAX_UNITS] = + {RX_COAL_FM, RX_COAL_FM, RX_COAL_FM, RX_COAL_FM}; + +#define TX_COAL_TK DEFAULT_TX_COALESCING_TICKS +static unsigned int tx_coalesce_ticks[MAX_UNITS] = + {TX_COAL_TK, TX_COAL_TK, TX_COAL_TK, TX_COAL_TK}; + +#define TX_COAL_FM DEFAULT_TX_MAX_COALESCED_FRAMES +static unsigned int tx_max_coalesce_frames[MAX_UNITS] = + {TX_COAL_FM, TX_COAL_FM, TX_COAL_FM, TX_COAL_FM}; + +#define ST_COAL_TK DEFAULT_STATS_COALESCING_TICKS +static unsigned int stats_coalesce_ticks[MAX_UNITS] = + {ST_COAL_TK, ST_COAL_TK, ST_COAL_TK, ST_COAL_TK}; + + + +/* + * Legitimate values for BCM570x device types + */ +typedef enum { + BCM5700VIGIL = 0, + BCM5700A6, + BCM5700T6, + BCM5700A9, + BCM5700T9, + BCM5700, + BCM5701A5, + BCM5701T1, + BCM5701T8, + BCM5701A7, + BCM5701A10, + BCM5701A12, + BCM5701, + BCM5702, + BCM5703, + BCM5703A31, + TC996T, + TC996ST, + TC996SSX, + TC996SX, + TC996BT, + TC997T, + TC997SX, + TC1000T, + TC940BR01, + TC942BR01, + NC6770, + NC7760, + NC7770, + NC7780 +} board_t; + +/* Chip-Rev names for each device-type */ +static struct { + char* name; +} chip_rev[] = { + {"BCM5700VIGIL"}, + {"BCM5700A6"}, + {"BCM5700T6"}, + {"BCM5700A9"}, + {"BCM5700T9"}, + {"BCM5700"}, + {"BCM5701A5"}, + {"BCM5701T1"}, + {"BCM5701T8"}, + {"BCM5701A7"}, + {"BCM5701A10"}, + {"BCM5701A12"}, + {"BCM5701"}, + {"BCM5702"}, + {"BCM5703"}, + {"BCM5703A31"}, + {"TC996T"}, + {"TC996ST"}, + {"TC996SSX"}, + {"TC996SX"}, + {"TC996BT"}, + {"TC997T"}, + {"TC997SX"}, + {"TC1000T"}, + {"TC940BR01"}, + {"TC942BR01"}, + {"NC6770"}, + {"NC7760"}, + {"NC7770"}, + {"NC7780"}, + {0} +}; + + +/* indexed by board_t, above */ +static struct { + char *name; +} board_info[] = { + { "Broadcom Vigil B5700 1000Base-T" }, + { "Broadcom BCM5700 1000Base-T" }, + { "Broadcom BCM5700 1000Base-SX" }, + { "Broadcom BCM5700 1000Base-SX" }, + { "Broadcom BCM5700 1000Base-T" }, + { "Broadcom BCM5700" }, + { "Broadcom BCM5701 1000Base-T" }, + { "Broadcom BCM5701 1000Base-T" }, + { "Broadcom BCM5701 1000Base-T" }, + { "Broadcom BCM5701 1000Base-SX" }, + { "Broadcom BCM5701 1000Base-T" }, + { "Broadcom BCM5701 1000Base-T" }, + { "Broadcom BCM5701" }, + { "Broadcom BCM5702 1000Base-T" }, + { "Broadcom BCM5703 1000Base-T" }, + { "Broadcom BCM5703 1000Base-SX" }, + { "3Com 3C996 10/100/1000 Server NIC" }, + { "3Com 3C996 10/100/1000 Server NIC" }, + { "3Com 3C996 Gigabit Fiber-SX Server NIC" }, + { "3Com 3C996 Gigabit Fiber-SX Server NIC" }, + { "3Com 3C996B Gigabit Server NIC" }, + { "3Com 3C997 Gigabit Server NIC" }, + { "3Com 3C997 Gigabit Fiber-SX Server NIC" }, + { "3Com 3C1000 Gigabit NIC" }, + { "3Com 3C940 Gigabit LOM (21X21)" }, + { "3Com 3C942 Gigabit LOM (31X31)" }, + { "Compaq NC6770 Gigabit Server Adapter" }, + { "Compaq NC7760 Gigabit Server Adapter" }, + { "Compaq NC7770 Gigabit Server Adapter" }, + { "Compaq NC7780 Gigabit Server Adapter" }, + { 0 }, +}; + +/* PCI Devices which use the 570x chipset */ +struct pci_device_table { + unsigned short vendor_id, device_id; /* Vendor/DeviceID */ + unsigned short subvendor, subdevice; /* Subsystem ID's or PCI_ANY_ID */ + unsigned int class, class_mask; /* (class,subclass,prog-if) triplet */ + unsigned long board_id; /* Data private to the driver */ + int io_size, min_latency; +} bcm570xDevices[] = { + {0x14e4, 0x1644, 0x1014, 0x0277, 0, 0, BCM5700VIGIL ,128,32}, + {0x14e4, 0x1644, 0x14e4, 0x1644, 0, 0, BCM5700A6 ,128,32}, + {0x14e4, 0x1644, 0x14e4, 0x2, 0, 0, BCM5700T6 ,128,32}, + {0x14e4, 0x1644, 0x14e4, 0x3, 0, 0, BCM5700A9 ,128,32}, + {0x14e4, 0x1644, 0x14e4, 0x4, 0, 0, BCM5700T9 ,128,32}, + {0x14e4, 0x1644, 0x1028, 0xd1, 0, 0, BCM5700 ,128,32}, + {0x14e4, 0x1644, 0x1028, 0x0106, 0, 0, BCM5700 ,128,32}, + {0x14e4, 0x1644, 0x1028, 0x0109, 0, 0, BCM5700 ,128,32}, + {0x14e4, 0x1644, 0x1028, 0x010a, 0, 0, BCM5700 ,128,32}, + {0x14e4, 0x1644, 0x10b7, 0x1000, 0, 0, TC996T ,128,32}, + {0x14e4, 0x1644, 0x10b7, 0x1001, 0, 0, TC996ST ,128,32}, + {0x14e4, 0x1644, 0x10b7, 0x1002, 0, 0, TC996SSX ,128,32}, + {0x14e4, 0x1644, 0x10b7, 0x1003, 0, 0, TC997T ,128,32}, + {0x14e4, 0x1644, 0x10b7, 0x1005, 0, 0, TC997SX ,128,32}, + {0x14e4, 0x1644, 0x10b7, 0x1008, 0, 0, TC942BR01 ,128,32}, + {0x14e4, 0x1644, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BCM5700 ,128,32}, + {0x14e4, 0x1645, 0x14e4, 1, 0, 0, BCM5701A5 ,128,32}, + {0x14e4, 0x1645, 0x14e4, 5, 0, 0, BCM5701T1 ,128,32}, + {0x14e4, 0x1645, 0x14e4, 6, 0, 0, BCM5701T8 ,128,32}, + {0x14e4, 0x1645, 0x14e4, 7, 0, 0, BCM5701A7 ,128,32}, + {0x14e4, 0x1645, 0x14e4, 8, 0, 0, BCM5701A10 ,128,32}, + {0x14e4, 0x1645, 0x14e4, 0x8008, 0, 0, BCM5701A12 ,128,32}, + {0x14e4, 0x1645, 0x0e11, 0xc1, 0, 0, NC6770 ,128,32}, + {0x14e4, 0x1645, 0x0e11, 0x7c, 0, 0, NC7770 ,128,32}, + {0x14e4, 0x1645, 0x0e11, 0x85, 0, 0, NC7780 ,128,32}, + {0x14e4, 0x1645, 0x1028, 0x0121, 0, 0, BCM5701 ,128,32}, + {0x14e4, 0x1645, 0x10b7, 0x1004, 0, 0, TC996SX ,128,32}, + {0x14e4, 0x1645, 0x10b7, 0x1006, 0, 0, TC996BT ,128,32}, + {0x14e4, 0x1645, 0x10b7, 0x1007, 0, 0, TC1000T ,128,32}, + {0x14e4, 0x1645, 0x10b7, 0x1008, 0, 0, TC940BR01 ,128,32}, + {0x14e4, 0x1645, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BCM5701 ,128,32}, + {0x14e4, 0x1646, 0x14e4, 0x8009, 0, 0, BCM5702 ,128,32}, + {0x14e4, 0x1646, 0x0e11, 0xbb, 0, 0, NC7760 ,128,32}, + {0x14e4, 0x1646, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BCM5702 ,128,32}, + {0x14e4, 0x16a6, 0x14e4, 0x8009, 0, 0, BCM5702 ,128,32}, + {0x14e4, 0x16a6, 0x0e11, 0xbb, 0, 0, NC7760 ,128,32}, + {0x14e4, 0x16a6, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BCM5702 ,128,32}, + {0x14e4, 0x1647, 0x14e4, 0x0009, 0, 0, BCM5703 ,128,32}, + {0x14e4, 0x1647, 0x14e4, 0x000a, 0, 0, BCM5703A31 ,128,32}, + {0x14e4, 0x1647, 0x14e4, 0x000b, 0, 0, BCM5703 ,128,32}, + {0x14e4, 0x1647, 0x14e4, 0x800a, 0, 0, BCM5703 ,128,32}, + {0x14e4, 0x1647, 0x0e11, 0x9a, 0, 0, NC7770 ,128,32}, + {0x14e4, 0x1647, 0x0e11, 0x99, 0, 0, NC7780 ,128,32}, + {0x14e4, 0x1647, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BCM5703 ,128,32}, + {0x14e4, 0x16a7, 0x14e4, 0x0009, 0, 0, BCM5703 ,128,32}, + {0x14e4, 0x16a7, 0x14e4, 0x000a, 0, 0, BCM5703A31 ,128,32}, + {0x14e4, 0x16a7, 0x14e4, 0x000b, 0, 0, BCM5703 ,128,32}, + {0x14e4, 0x16a7, 0x14e4, 0x800a, 0, 0, BCM5703 ,128,32}, + {0x14e4, 0x16a7, 0x0e11, 0x9a, 0, 0, NC7770 ,128,32}, + {0x14e4, 0x16a7, 0x0e11, 0x99, 0, 0, NC7780 ,128,32}, + {0x14e4, 0x16a7, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BCM5703 ,128,32} +}; + +#define n570xDevices (sizeof(bcm570xDevices)/sizeof(bcm570xDevices[0])) + + + +/* + * Allocate a packet buffer from the bcm570x packet pool. + */ +void * +bcm570xPktAlloc(int u, int pksize) +{ + return malloc(pksize); +} + +/* + * Free a packet previously allocated from the bcm570x packet + * buffer pool. + */ +void +bcm570xPktFree(int u, void *p) +{ + free(p); +} + +int +bcm570xReplenishRxBuffers(PUM_DEVICE_BLOCK pUmDevice) +{ + PLM_PACKET pPacket; + PUM_PACKET pUmPacket; + void *skb; + int queue_rx = 0; + int ret = 0; + + while ((pUmPacket = (PUM_PACKET) + QQ_PopHead(&pUmDevice->rx_out_of_buf_q.Container)) != 0) { + + pPacket = (PLM_PACKET) pUmPacket; + + /* reuse an old skb */ + if (pUmPacket->skbuff) { + QQ_PushTail(&pDevice->RxPacketFreeQ.Container, pPacket); + queue_rx = 1; + continue; + } + if ( ( skb = bcm570xPktAlloc(pUmDevice->index, + pPacket->u.Rx.RxBufferSize + 2)) == 0) { + QQ_PushHead(&pUmDevice->rx_out_of_buf_q.Container,pPacket); + printf("NOTICE: Out of RX memory.\n"); + ret = 1; + break; + } + + pUmPacket->skbuff = skb; + QQ_PushTail(&pDevice->RxPacketFreeQ.Container, pPacket); + queue_rx = 1; + } + + if (queue_rx) { + LM_QueueRxPackets(pDevice); + } + + return ret; +} + +/* + * Probe, Map, and Init 570x device. + */ +int eth_init(bd_t *bis) +{ + int i, rv, devFound = FALSE; + pci_dev_t devbusfn; + unsigned short status; + + /* Find PCI device, if it exists, configure ... */ + for( i = 0; i < n570xDevices; i++){ + devbusfn = pci_find_device(bcm570xDevices[i].vendor_id, + bcm570xDevices[i].device_id, 0); + if(devbusfn == -1) { + continue; /* No device of that vendor/device ID */ + } else { + + /* Set ILINE */ + pci_write_config_byte(devbusfn, + PCI_INTERRUPT_LINE, BCM570X_ILINE); + + /* + * 0x10 - 0x14 define one 64-bit MBAR. + * 0x14 is the higher-order address bits of the BAR. + */ + pci_write_config_dword(devbusfn, + PCI_BASE_ADDRESS_1, 0); + + ioBase = BCM570X_MBAR; + + pci_write_config_dword(devbusfn, + PCI_BASE_ADDRESS_0, ioBase); + + /* + * Enable PCI memory, IO, and Master -- don't + * reset any status bits in doing so. + */ + pci_read_config_word(devbusfn, + PCI_COMMAND, &status); + + status |= PCI_COMMAND_MEMORY|PCI_COMMAND_MASTER; + + pci_write_config_word(devbusfn, + PCI_COMMAND, status); + + printf("\n%s: bus %d, device %d, function %d: MBAR=0x%x\n", + board_info[bcm570xDevices[i].board_id].name, + PCI_BUS(devbusfn), + PCI_DEV(devbusfn), + PCI_FUNC(devbusfn), + ioBase); + + /* Allocate once, but always clear on init */ + if (!pDevice) { + pDevice = malloc(sizeof(UM_DEVICE_BLOCK)); + pUmDevice = (PUM_DEVICE_BLOCK)pDevice; + memset(pDevice, 0x0, sizeof(UM_DEVICE_BLOCK)); + } + + /* Configure pci dev structure */ + pUmDevice->pdev = devbusfn; + pUmDevice->index = 0; + pUmDevice->tx_pkt = 0; + pUmDevice->rx_pkt = 0; + devFound = TRUE; + break; + } + } + + if(!devFound){ + printf("eth_init: FAILURE: no BCM570x Ethernet devices found.\n"); + return -1; + } + + /* Setup defaults for chip */ + pDevice->TaskToOffload = LM_TASK_OFFLOAD_NONE; + + if (pDevice->ChipRevId == T3_CHIP_ID_5700_B0) { + pDevice->TaskToOffload = LM_TASK_OFFLOAD_NONE; + } else { + + if (rx_checksum[i]) { + pDevice->TaskToOffload |= + LM_TASK_OFFLOAD_RX_TCP_CHECKSUM | + LM_TASK_OFFLOAD_RX_UDP_CHECKSUM; + } + + if (tx_checksum[i]) { + pDevice->TaskToOffload |= + LM_TASK_OFFLOAD_TX_TCP_CHECKSUM | + LM_TASK_OFFLOAD_TX_UDP_CHECKSUM; + pDevice->NoTxPseudoHdrChksum = TRUE; + } + } + + /* Set Device PCI Memory base address */ + pDevice->pMappedMemBase = (PLM_UINT8) ioBase; + + /* Pull down adapter info */ + if ((rv = LM_GetAdapterInfo(pDevice)) != LM_STATUS_SUCCESS) { + printf("bcm570xEnd: LM_GetAdapterInfo failed: rv=%d!\n", rv ); + return -2; + } + + /* Lock not needed */ + pUmDevice->do_global_lock = 0; + + if (T3_ASIC_REV(pUmDevice->lm_dev.ChipRevId) == T3_ASIC_REV_5700) { + /* The 5700 chip works best without interleaved register */ + /* accesses on certain machines. */ + pUmDevice->do_global_lock = 1; + } + + /* Setup timer delays */ + if (T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5701) { + pDevice->UseTaggedStatus = TRUE; + pUmDevice->timer_interval = CFG_HZ; + } + else { + pUmDevice->timer_interval = CFG_HZ / 50; + } + + /* Grab name .... */ + pUmDevice->name = + (char*)malloc(strlen(board_info[bcm570xDevices[i].board_id].name)+1); + strcpy(pUmDevice->name,board_info[bcm570xDevices[i].board_id].name); + + memcpy(pDevice->NodeAddress, bis->bi_enetaddr, 6); + LM_SetMacAddress(pDevice, bis->bi_enetaddr); + /* Init queues .. */ + QQ_InitQueue(&pUmDevice->rx_out_of_buf_q.Container, + MAX_RX_PACKET_DESC_COUNT); + pUmDevice->rx_last_cnt = pUmDevice->tx_last_cnt = 0; + + /* delay for 4 seconds */ + pUmDevice->delayed_link_ind = + (4 * CFG_HZ) / pUmDevice->timer_interval; + + pUmDevice->adaptive_expiry = + CFG_HZ / pUmDevice->timer_interval; + + /* Sometimes we get spurious ints. after reset when link is down. */ + /* This field tells the isr to service the int. even if there is */ + /* no status block update. */ + pUmDevice->adapter_just_inited = + (3 * CFG_HZ) / pUmDevice->timer_interval; + + /* Initialize 570x */ + if (LM_InitializeAdapter(pDevice) != LM_STATUS_SUCCESS) { + printf("ERROR: Adapter initialization failed.\n"); + return ERROR; + } + + /* Enable chip ISR */ + LM_EnableInterrupt(pDevice); + + /* Clear MC table */ + LM_MulticastClear(pDevice); + + /* Enable Multicast */ + LM_SetReceiveMask(pDevice, + pDevice->ReceiveMask | LM_ACCEPT_ALL_MULTICAST); + + pUmDevice->opened = 1; + pUmDevice->tx_full = 0; + pUmDevice->tx_pkt = 0; + pUmDevice->rx_pkt = 0; + printf("eth%d: %s @0x%lx,", + pDevice->index, pUmDevice->name, (unsigned long)ioBase); + printf( "node addr "); + for (i = 0; i < 6; i++) { + printf("%2.2x", pDevice->NodeAddress[i]); + } + printf("\n"); + + printf("eth%d: ", pDevice->index); + printf("%s with ", + chip_rev[bcm570xDevices[i].board_id].name); + + if ((pDevice->PhyId & PHY_ID_MASK) == PHY_BCM5400_PHY_ID) + printf("Broadcom BCM5400 Copper "); + else if ((pDevice->PhyId & PHY_ID_MASK) == PHY_BCM5401_PHY_ID) + printf("Broadcom BCM5401 Copper "); + else if ((pDevice->PhyId & PHY_ID_MASK) == PHY_BCM5411_PHY_ID) + printf("Broadcom BCM5411 Copper "); + else if ((pDevice->PhyId & PHY_ID_MASK) == PHY_BCM5701_PHY_ID) + printf("Broadcom BCM5701 Integrated Copper "); + else if ((pDevice->PhyId & PHY_ID_MASK) == PHY_BCM5703_PHY_ID) + printf("Broadcom BCM5703 Integrated Copper "); + else if ((pDevice->PhyId & PHY_ID_MASK) == PHY_BCM8002_PHY_ID) + printf("Broadcom BCM8002 SerDes "); + else if (pDevice->EnableTbi) + printf("Agilent HDMP-1636 SerDes "); + else + printf("Unknown "); + printf("transceiver found\n"); + + printf("eth%d: %s, MTU: %d,", + pDevice->index, pDevice->BusSpeedStr, 1500); + + if ((pDevice->ChipRevId != T3_CHIP_ID_5700_B0) && + rx_checksum[i]) + printf("Rx Checksum ON\n"); + else + printf("Rx Checksum OFF\n"); + initialized++; + + return 0; +} + +/* Ethernet Interrupt service routine */ +void +eth_isr(void) +{ + LM_UINT32 oldtag, newtag; + int i; + + pUmDevice->interrupt = 1; + + if (pDevice->UseTaggedStatus) { + if ((pDevice->pStatusBlkVirt->Status & STATUS_BLOCK_UPDATED) || + pUmDevice->adapter_just_inited) { + MB_REG_WR(pDevice, Mailbox.Interrupt[0].Low, 1); + oldtag = pDevice->pStatusBlkVirt->StatusTag; + + for (i = 0; ; i++) { + pDevice->pStatusBlkVirt->Status &= ~STATUS_BLOCK_UPDATED; + LM_ServiceInterrupts(pDevice); + newtag = pDevice->pStatusBlkVirt->StatusTag; + if ((newtag == oldtag) || (i > 50)) { + MB_REG_WR(pDevice, Mailbox.Interrupt[0].Low, newtag << 24); + if (pDevice->UndiFix) { + REG_WR(pDevice, Grc.LocalCtrl, + pDevice->GrcLocalCtrl | 0x2); + } + break; + } + oldtag = newtag; + } + } + } + else { + while (pDevice->pStatusBlkVirt->Status & STATUS_BLOCK_UPDATED) { + unsigned int dummy; + + pDevice->pMemView->Mailbox.Interrupt[0].Low = 1; + pDevice->pStatusBlkVirt->Status &= ~STATUS_BLOCK_UPDATED; + LM_ServiceInterrupts(pDevice); + pDevice->pMemView->Mailbox.Interrupt[0].Low = 0; + dummy = pDevice->pMemView->Mailbox.Interrupt[0].Low; + } + } + + /* Allocate new RX buffers */ + if (QQ_GetEntryCnt(&pUmDevice->rx_out_of_buf_q.Container)) { + bcm570xReplenishRxBuffers(pUmDevice); + } + + /* Queue packets */ + if (QQ_GetEntryCnt(&pDevice->RxPacketFreeQ.Container)) { + LM_QueueRxPackets(pDevice); + } + + if (pUmDevice->tx_queued) { + pUmDevice->tx_queued = 0; + } + + if(pUmDevice->tx_full){ + if(pDevice->LinkStatus != LM_STATUS_LINK_DOWN){ + printf("NOTICE: tx was previously blocked, restarting MUX\n"); + pUmDevice->tx_full = 0; + } + } + + pUmDevice->interrupt = 0; + +} + +int +eth_send(volatile void *packet, int length) +{ + int status = 0; +#if ET_DEBUG + unsigned char* ptr = (unsigned char*)packet; +#endif + PLM_PACKET pPacket; + PUM_PACKET pUmPacket; + + /* Link down, return */ + while(pDevice->LinkStatus == LM_STATUS_LINK_DOWN) { +#if 0 + printf("eth%d: link down - check cable or link partner.\n", + pUmDevice->index); +#endif + eth_isr(); + + /* Wait to see link for one-half a second before sending ... */ + udelay(1500000); + + } + + /* Clear sent flag */ + pUmDevice->tx_pkt = 0; + + /* Previously blocked */ + if(pUmDevice->tx_full){ + printf("eth%d: tx blocked.\n", pUmDevice->index); + return 0; + } + + pPacket = (PLM_PACKET) + QQ_PopHead(&pDevice->TxPacketFreeQ.Container); + + if (pPacket == 0) { + pUmDevice->tx_full = 1; + printf("bcm570xEndSend: TX full!\n"); + return 0; + } + + if (pDevice->SendBdLeft.counter == 0) { + pUmDevice->tx_full = 1; + printf("bcm570xEndSend: no more TX descriptors!\n"); + QQ_PushHead(&pDevice->TxPacketFreeQ.Container, pPacket); + return 0; + } + + if (length <= 0){ + printf("eth: bad packet size: %d\n", length); + goto out; + } + + /* Get packet buffers and fragment list */ + pUmPacket = (PUM_PACKET) pPacket; + /* Single DMA Descriptor transmit. + * Fragments may be provided, but one DMA descriptor max is + * used to send the packet. + */ + if (MM_CoalesceTxBuffer (pDevice, pPacket) != LM_STATUS_SUCCESS) { + if (pUmPacket->skbuff == NULL){ + /* Packet was discarded */ + printf("TX: failed (1)\n"); + status = 1; + } else{ + printf("TX: failed (2)\n"); + status = 2; + } + QQ_PushHead (&pDevice->TxPacketFreeQ.Container, pPacket); + return status; + } + + /* Copy packet to DMA buffer */ + memset(pUmPacket->skbuff, 0x0, MAX_PACKET_SIZE); + memcpy((void*)pUmPacket->skbuff, (void*)packet, length); + pPacket->PacketSize = length; + pPacket->Flags |= SND_BD_FLAG_END|SND_BD_FLAG_COAL_NOW; + pPacket->u.Tx.FragCount = 1; + /* We've already provided a frame ready for transmission */ + pPacket->Flags &= ~SND_BD_FLAG_TCP_UDP_CKSUM; + + if ( LM_SendPacket(pDevice, pPacket) == LM_STATUS_FAILURE){ + /* + * A lower level send failure will push the packet descriptor back + * in the free queue, so just deal with the VxWorks clusters. + */ + if (pUmPacket->skbuff == NULL){ + printf("TX failed (1)!\n"); + /* Packet was discarded */ + status = 3; + } else { + /* A resource problem ... */ + printf("TX failed (2)!\n"); + status = 4; + } + + if (QQ_GetEntryCnt(&pDevice->TxPacketFreeQ.Container) == 0) { + printf("TX: emptyQ!\n"); + pUmDevice->tx_full = 1; + } + } + + while(pUmDevice->tx_pkt == 0){ + /* Service TX */ + eth_isr(); + } +#if ET_DEBUG + printf("eth_send: 0x%x, %d bytes\n" + "[%x %x %x %x %x %x %x %x %x %x %x %x %x %x %x %x] ...\n", + (int)pPacket, length, + ptr[0],ptr[1],ptr[2],ptr[3],ptr[4],ptr[5], + ptr[6],ptr[7],ptr[8],ptr[9],ptr[10],ptr[11],ptr[12], + ptr[13],ptr[14],ptr[15]); +#endif + pUmDevice->tx_pkt = 0; + QQ_PushHead(&pDevice->TxPacketFreeQ.Container, pPacket); + + /* Done with send */ + out: + return status; +} + + +/* Ethernet receive */ +int +eth_rx(void) +{ + PLM_PACKET pPacket = NULL; + PUM_PACKET pUmPacket = NULL; + void *skb; + int size=0; + + while(TRUE) { + + bcm570x_service_isr: + /* Pull down packet if it is there */ + eth_isr(); + + /* Indicate RX packets called */ + if(pUmDevice->rx_pkt){ + /* printf("eth_rx: got a packet...\n"); */ + pUmDevice->rx_pkt = 0; + } else { + /* printf("eth_rx: waiting for packet...\n"); */ + goto bcm570x_service_isr; + } + + pPacket = (PLM_PACKET) + QQ_PopHead(&pDevice->RxPacketReceivedQ.Container); + + if (pPacket == 0){ + printf("eth_rx: empty packet!\n"); + goto bcm570x_service_isr; + } + + pUmPacket = (PUM_PACKET) pPacket; +#if ET_DEBUG + printf("eth_rx: packet @0x%x\n", + (int)pPacket); +#endif + /* If the packet generated an error, reuse buffer */ + if ((pPacket->PacketStatus != LM_STATUS_SUCCESS) || + ((size = pPacket->PacketSize) > pDevice->RxMtu)) { + + /* reuse skb */ + QQ_PushTail(&pDevice->RxPacketFreeQ.Container, pPacket); + printf("eth_rx: error in packet dma!\n"); + goto bcm570x_service_isr; + } + + /* Set size and address */ + skb = pUmPacket->skbuff; + size = pPacket->PacketSize; + + /* Pass the packet up to the protocol + * layers. + */ + NetReceive(skb, size); + + /* Free packet buffer */ + bcm570xPktFree (pUmDevice->index, skb); + pUmPacket->skbuff = NULL; + + /* Reuse SKB */ + QQ_PushTail(&pDevice->RxPacketFreeQ.Container, pPacket); + + return 0; /* Got a packet, bail ... */ + } + return size; +} + + + +/* Shut down device */ +void +eth_halt(void) +{ + int i; + if ( initialized) + if (pDevice && pUmDevice && pUmDevice->opened){ + printf("\neth%d:%s,", pUmDevice->index, pUmDevice->name); + printf("HALT,"); + /* stop device */ + LM_Halt(pDevice); + printf("POWER DOWN,"); + LM_SetPowerState(pDevice, LM_POWER_STATE_D3); + + /* Free the memory allocated by the device in tigon3 */ + for (i = 0; i < pUmDevice->mem_list_num; i++) { + if (pUmDevice->mem_list[i]) { + /* sanity check */ + if (pUmDevice->dma_list[i]) { /* cache-safe memory */ + free(pUmDevice->mem_list[i]); + } else { + free(pUmDevice->mem_list[i]); /* normal memory */ + } + } + } + pUmDevice->opened = 0; + free(pDevice); + pDevice = NULL; + pUmDevice = NULL; + initialized = 0; + printf("done - offline.\n"); + } +} + + + + +/* + * + * Middle Module: Interface between the HW driver (tigon3 modules) and + * the native (SENS) driver. These routines implement the system + * interface for tigon3 on VxWorks. + */ + +/* Middle module dependency - size of a packet descriptor */ +int MM_Packet_Desc_Size = sizeof(UM_PACKET); + + +LM_STATUS +MM_ReadConfig32(PLM_DEVICE_BLOCK pDevice, + LM_UINT32 Offset, + LM_UINT32 *pValue32) +{ + UM_DEVICE_BLOCK *pUmDevice; + pUmDevice = (UM_DEVICE_BLOCK *) pDevice; + pci_read_config_dword(pUmDevice->pdev, + Offset, (u32 *) pValue32); + return LM_STATUS_SUCCESS; +} + + +LM_STATUS +MM_WriteConfig32(PLM_DEVICE_BLOCK pDevice, + LM_UINT32 Offset, + LM_UINT32 Value32) +{ + UM_DEVICE_BLOCK *pUmDevice; + pUmDevice = (UM_DEVICE_BLOCK *) pDevice; + pci_write_config_dword(pUmDevice->pdev, + Offset, Value32); + return LM_STATUS_SUCCESS; +} + + +LM_STATUS +MM_ReadConfig16(PLM_DEVICE_BLOCK pDevice, + LM_UINT32 Offset, + LM_UINT16 *pValue16) +{ + UM_DEVICE_BLOCK *pUmDevice; + pUmDevice = (UM_DEVICE_BLOCK *) pDevice; + pci_read_config_word(pUmDevice->pdev, + Offset, (u16*) pValue16); + return LM_STATUS_SUCCESS; +} + +LM_STATUS +MM_WriteConfig16(PLM_DEVICE_BLOCK pDevice, + LM_UINT32 Offset, + LM_UINT16 Value16) +{ + UM_DEVICE_BLOCK *pUmDevice; + pUmDevice = (UM_DEVICE_BLOCK *) pDevice; + pci_write_config_word(pUmDevice->pdev, + Offset, Value16); + return LM_STATUS_SUCCESS; +} + + +LM_STATUS +MM_AllocateSharedMemory(PLM_DEVICE_BLOCK pDevice, LM_UINT32 BlockSize, + PLM_VOID *pMemoryBlockVirt, + PLM_PHYSICAL_ADDRESS pMemoryBlockPhy, + LM_BOOL Cached) +{ + PLM_VOID pvirt; + PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK) pDevice; + dma_addr_t mapping; + + pvirt = malloc(BlockSize); + mapping = (dma_addr_t)(pvirt); + if (!pvirt) + return LM_STATUS_FAILURE; + + pUmDevice->mem_list[pUmDevice->mem_list_num] = pvirt; + pUmDevice->dma_list[pUmDevice->mem_list_num] = mapping; + pUmDevice->mem_size_list[pUmDevice->mem_list_num++] = BlockSize; + memset(pvirt, 0, BlockSize); + + *pMemoryBlockVirt = (PLM_VOID) pvirt; + MM_SetAddr (pMemoryBlockPhy, (dma_addr_t) mapping); + + return LM_STATUS_SUCCESS; +} + + + +LM_STATUS +MM_AllocateMemory(PLM_DEVICE_BLOCK pDevice, LM_UINT32 BlockSize, + PLM_VOID *pMemoryBlockVirt) +{ + PLM_VOID pvirt; + PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK) pDevice; + + pvirt = malloc(BlockSize); + + if (!pvirt) + return LM_STATUS_FAILURE; + + pUmDevice->mem_list[pUmDevice->mem_list_num] = pvirt; + pUmDevice->dma_list[pUmDevice->mem_list_num] = 0; + pUmDevice->mem_size_list[pUmDevice->mem_list_num++] = BlockSize; + memset(pvirt, 0, BlockSize); + *pMemoryBlockVirt = pvirt; + + return LM_STATUS_SUCCESS; +} + +LM_STATUS +MM_MapMemBase(PLM_DEVICE_BLOCK pDevice) +{ + printf("BCM570x PCI Memory base address @0x%x\n", + (unsigned int)pDevice->pMappedMemBase); + return LM_STATUS_SUCCESS; +} + +LM_STATUS +MM_InitializeUmPackets(PLM_DEVICE_BLOCK pDevice) +{ + int i; + void* skb; + PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK) pDevice; + PUM_PACKET pUmPacket = NULL; + PLM_PACKET pPacket = NULL; + + for (i = 0; i < pDevice->RxPacketDescCnt; i++) { + pPacket = QQ_PopHead(&pDevice->RxPacketFreeQ.Container); + pUmPacket = (PUM_PACKET) pPacket; + + if (pPacket == 0) { + printf("MM_InitializeUmPackets: Bad RxPacketFreeQ\n"); + } + + skb = bcm570xPktAlloc(pUmDevice->index, + pPacket->u.Rx.RxBufferSize + 2); + + if (skb == 0) { + pUmPacket->skbuff = 0; + QQ_PushTail(&pUmDevice->rx_out_of_buf_q.Container, pPacket); + printf("MM_InitializeUmPackets: out of buffer.\n"); + continue; + } + + pUmPacket->skbuff = skb; + QQ_PushTail(&pDevice->RxPacketFreeQ.Container, pPacket); + } + + pUmDevice->rx_low_buf_thresh = pDevice->RxPacketDescCnt / 8; + + return LM_STATUS_SUCCESS; +} + +LM_STATUS +MM_GetConfig(PLM_DEVICE_BLOCK pDevice) +{ + PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK) pDevice; + int index = pDevice->index; + + if (auto_speed[index] == 0) + pDevice->DisableAutoNeg = TRUE; + else + pDevice->DisableAutoNeg = FALSE; + + if (line_speed[index] == 0) { + pDevice->RequestedMediaType = + LM_REQUESTED_MEDIA_TYPE_AUTO; + pDevice->DisableAutoNeg = FALSE; + } + else { + if (line_speed[index] == 1000) { + if (pDevice->EnableTbi) { + pDevice->RequestedMediaType = + LM_REQUESTED_MEDIA_TYPE_FIBER_1000MBPS_FULL_DUPLEX; + } + else if (full_duplex[index]) { + pDevice->RequestedMediaType = + LM_REQUESTED_MEDIA_TYPE_UTP_1000MBPS_FULL_DUPLEX; + } + else { + pDevice->RequestedMediaType = + LM_REQUESTED_MEDIA_TYPE_UTP_1000MBPS; + } + if (!pDevice->EnableTbi) + pDevice->DisableAutoNeg = FALSE; + } + else if (line_speed[index] == 100) { + if (full_duplex[index]) { + pDevice->RequestedMediaType = + LM_REQUESTED_MEDIA_TYPE_UTP_100MBPS_FULL_DUPLEX; + } + else { + pDevice->RequestedMediaType = + LM_REQUESTED_MEDIA_TYPE_UTP_100MBPS; + } + } + else if (line_speed[index] == 10) { + if (full_duplex[index]) { + pDevice->RequestedMediaType = + LM_REQUESTED_MEDIA_TYPE_UTP_10MBPS_FULL_DUPLEX; + } + else { + pDevice->RequestedMediaType = + LM_REQUESTED_MEDIA_TYPE_UTP_10MBPS; + } + } + else { + pDevice->RequestedMediaType = + LM_REQUESTED_MEDIA_TYPE_AUTO; + pDevice->DisableAutoNeg = FALSE; + } + + } + pDevice->FlowControlCap = 0; + if (rx_flow_control[index] != 0) { + pDevice->FlowControlCap |= LM_FLOW_CONTROL_RECEIVE_PAUSE; + } + if (tx_flow_control[index] != 0) { + pDevice->FlowControlCap |= LM_FLOW_CONTROL_TRANSMIT_PAUSE; + } + if ((auto_flow_control[index] != 0) && + (pDevice->DisableAutoNeg == FALSE)) { + + pDevice->FlowControlCap |= LM_FLOW_CONTROL_AUTO_PAUSE; + if ((tx_flow_control[index] == 0) && + (rx_flow_control[index] == 0)) { + pDevice->FlowControlCap |= + LM_FLOW_CONTROL_TRANSMIT_PAUSE | + LM_FLOW_CONTROL_RECEIVE_PAUSE; + } + } + + /* Default MTU for now */ + pUmDevice->mtu = 1500; + +#if T3_JUMBO_RCV_RCB_ENTRY_COUNT + if (pUmDevice->mtu > 1500) { + pDevice->RxMtu = pUmDevice->mtu; + pDevice->RxJumboDescCnt = DEFAULT_JUMBO_RCV_DESC_COUNT; + } + else { + pDevice->RxJumboDescCnt = 0; + } + pDevice->RxJumboDescCnt = rx_jumbo_desc_cnt[index]; +#else + pDevice->RxMtu = pUmDevice->mtu; +#endif + + if (T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5701) { + pDevice->UseTaggedStatus = TRUE; + pUmDevice->timer_interval = CFG_HZ; + } + else { + pUmDevice->timer_interval = CFG_HZ/50; + } + + pDevice->TxPacketDescCnt = tx_pkt_desc_cnt[index]; + pDevice->RxStdDescCnt = rx_std_desc_cnt[index]; + /* Note: adaptive coalescence really isn't adaptive in this driver */ + pUmDevice->rx_adaptive_coalesce = rx_adaptive_coalesce[index]; + if (!pUmDevice->rx_adaptive_coalesce) { + pDevice->RxCoalescingTicks = rx_coalesce_ticks[index]; + if (pDevice->RxCoalescingTicks > MAX_RX_COALESCING_TICKS) + pDevice->RxCoalescingTicks = MAX_RX_COALESCING_TICKS; + pUmDevice->rx_curr_coalesce_ticks =pDevice->RxCoalescingTicks; + + pDevice->RxMaxCoalescedFrames = rx_max_coalesce_frames[index]; + if (pDevice->RxMaxCoalescedFrames>MAX_RX_MAX_COALESCED_FRAMES) + pDevice->RxMaxCoalescedFrames = + MAX_RX_MAX_COALESCED_FRAMES; + pUmDevice->rx_curr_coalesce_frames = + pDevice->RxMaxCoalescedFrames; + pDevice->StatsCoalescingTicks = stats_coalesce_ticks[index]; + if (pDevice->StatsCoalescingTicks>MAX_STATS_COALESCING_TICKS) + pDevice->StatsCoalescingTicks= + MAX_STATS_COALESCING_TICKS; + } + else { + pUmDevice->rx_curr_coalesce_frames = + DEFAULT_RX_MAX_COALESCED_FRAMES; + pUmDevice->rx_curr_coalesce_ticks = + DEFAULT_RX_COALESCING_TICKS; + } + pDevice->TxCoalescingTicks = tx_coalesce_ticks[index]; + if (pDevice->TxCoalescingTicks > MAX_TX_COALESCING_TICKS) + pDevice->TxCoalescingTicks = MAX_TX_COALESCING_TICKS; + pDevice->TxMaxCoalescedFrames = tx_max_coalesce_frames[index]; + if (pDevice->TxMaxCoalescedFrames > MAX_TX_MAX_COALESCED_FRAMES) + pDevice->TxMaxCoalescedFrames = MAX_TX_MAX_COALESCED_FRAMES; + + if (enable_wol[index]) { + pDevice->WakeUpModeCap = LM_WAKE_UP_MODE_MAGIC_PACKET; + pDevice->WakeUpMode = LM_WAKE_UP_MODE_MAGIC_PACKET; + } + pDevice->NicSendBd = TRUE; + + /* Don't update status blocks during interrupt */ + pDevice->RxCoalescingTicksDuringInt = 0; + pDevice->TxCoalescingTicksDuringInt = 0; + + return LM_STATUS_SUCCESS; + +} + + +LM_STATUS +MM_StartTxDma(PLM_DEVICE_BLOCK pDevice, PLM_PACKET pPacket) +{ + PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK) pDevice; + printf("Start TX DMA: dev=%d packet @0x%x\n", + (int)pUmDevice->index, (unsigned int)pPacket); + + return LM_STATUS_SUCCESS; +} + +LM_STATUS +MM_CompleteTxDma(PLM_DEVICE_BLOCK pDevice, PLM_PACKET pPacket) +{ + PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK) pDevice; + printf("Complete TX DMA: dev=%d packet @0x%x\n", + (int)pUmDevice->index, (unsigned int)pPacket); + return LM_STATUS_SUCCESS; +} + + +LM_STATUS +MM_IndicateStatus(PLM_DEVICE_BLOCK pDevice, LM_STATUS Status) +{ + char buf[128]; + char lcd[4]; + PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK) pDevice; + LM_FLOW_CONTROL flow_control; + + pUmDevice->delayed_link_ind = 0; + memset(lcd, 0x0, 4); + + if (Status == LM_STATUS_LINK_DOWN) { + sprintf(buf,"eth%d: %s: NIC Link is down\n", + pUmDevice->index,pUmDevice->name); + lcd[0] = 'L';lcd[1]='N';lcd[2]='K';lcd[3] = '?'; + } else if (Status == LM_STATUS_LINK_ACTIVE) { + sprintf(buf,"eth%d:%s: ", pUmDevice->index, pUmDevice->name); + + if (pDevice->LineSpeed == LM_LINE_SPEED_1000MBPS){ + strcat(buf,"1000 Mbps "); + lcd[0] = '1';lcd[1]='G';lcd[2]='B'; + } else if (pDevice->LineSpeed == LM_LINE_SPEED_100MBPS){ + strcat(buf,"100 Mbps "); + lcd[0] = '1';lcd[1]='0';lcd[2]='0'; + } else if (pDevice->LineSpeed == LM_LINE_SPEED_10MBPS){ + strcat(buf,"10 Mbps "); + lcd[0] = '1';lcd[1]='0';lcd[2]=' '; + } + if (pDevice->DuplexMode == LM_DUPLEX_MODE_FULL){ + strcat(buf, "full duplex"); + lcd[3] = 'F'; + } else { + strcat(buf, "half duplex"); + lcd[3] = 'H'; + } + strcat(buf, " link up"); + + flow_control = pDevice->FlowControl & + (LM_FLOW_CONTROL_RECEIVE_PAUSE | + LM_FLOW_CONTROL_TRANSMIT_PAUSE); + + if (flow_control) { + if (flow_control & LM_FLOW_CONTROL_RECEIVE_PAUSE) { + strcat(buf,", receive "); + if (flow_control & LM_FLOW_CONTROL_TRANSMIT_PAUSE) + strcat(buf," & transmit "); + } + else { + strcat(buf,", transmit "); + } + strcat(buf,"flow control ON"); + } else { + strcat(buf, ", flow control OFF"); + } + strcat(buf,"\n"); + printf("%s",buf); + } +#if 0 + sysLedDsply(lcd[0],lcd[1],lcd[2],lcd[3]); +#endif + return LM_STATUS_SUCCESS; +} + +LM_STATUS +MM_FreeRxBuffer(PLM_DEVICE_BLOCK pDevice, PLM_PACKET pPacket) +{ + + PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK) pDevice; + PUM_PACKET pUmPacket; + void *skb; + + pUmPacket = (PUM_PACKET) pPacket; + + if ((skb = pUmPacket->skbuff)) + bcm570xPktFree(pUmDevice->index, skb); + + pUmPacket->skbuff = 0; + + return LM_STATUS_SUCCESS; +} + +unsigned long +MM_AnGetCurrentTime_us(PAN_STATE_INFO pAnInfo) +{ + return get_timer(0); +} + +/* + * Transform an MBUF chain into a single MBUF. + * This routine will fail if the amount of data in the + * chain overflows a transmit buffer. In that case, + * the incoming MBUF chain will be freed. This routine can + * also fail by not being able to allocate a new MBUF (including + * cluster and mbuf headers). In that case the failure is + * non-fatal. The incoming cluster chain is not freed, giving + * the caller the choice of whether to try a retransmit later. + */ +LM_STATUS +MM_CoalesceTxBuffer(PLM_DEVICE_BLOCK pDevice, PLM_PACKET pPacket) +{ + PUM_PACKET pUmPacket = (PUM_PACKET) pPacket; + PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK) pDevice; + void *skbnew; + int len = 0; + + if (len == 0) + return (LM_STATUS_SUCCESS); + + if (len > MAX_PACKET_SIZE){ + printf ("eth%d: xmit frame discarded, too big!, size = %d\n", + pUmDevice->index, len); + return (LM_STATUS_FAILURE); + } + + skbnew = bcm570xPktAlloc(pUmDevice->index, MAX_PACKET_SIZE); + + if (skbnew == NULL) { + pUmDevice->tx_full = 1; + printf ("eth%d: out of transmit buffers", pUmDevice->index); + return (LM_STATUS_FAILURE); + } + + /* New packet values */ + pUmPacket->skbuff = skbnew; + pUmPacket->lm_packet.u.Tx.FragCount = 1; + + return (LM_STATUS_SUCCESS); +} + + +LM_STATUS +MM_IndicateRxPackets(PLM_DEVICE_BLOCK pDevice) +{ + PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK) pDevice; + pUmDevice->rx_pkt = 1; + return LM_STATUS_SUCCESS; +} + +LM_STATUS +MM_IndicateTxPackets(PLM_DEVICE_BLOCK pDevice) +{ + PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK) pDevice; + PLM_PACKET pPacket; + PUM_PACKET pUmPacket; + void *skb; + while ( TRUE ) { + + pPacket = (PLM_PACKET) + QQ_PopHead(&pDevice->TxPacketXmittedQ.Container); + + if (pPacket == 0) + break; + + pUmPacket = (PUM_PACKET) pPacket; + skb = (void*)pUmPacket->skbuff; + + /* + * Free MBLK if we transmitted a fragmented packet or a + * non-fragmented packet straight from the VxWorks + * buffer pool. If packet was copied to a local transmit + * buffer, then there's no MBUF to free, just free + * the transmit buffer back to the cluster pool. + */ + + if (skb) + bcm570xPktFree (pUmDevice->index, skb); + + pUmPacket->skbuff = 0; + QQ_PushTail(&pDevice->TxPacketFreeQ.Container, pPacket); + pUmDevice->tx_pkt = 1; + } + if (pUmDevice->tx_full) { + if (QQ_GetEntryCnt(&pDevice->TxPacketFreeQ.Container) >= + (QQ_GetSize(&pDevice->TxPacketFreeQ.Container) >> 1)) + pUmDevice->tx_full = 0; + } + return LM_STATUS_SUCCESS; +} + +/* + * Scan an MBUF chain until we reach fragment number "frag" + * Return its length and physical address. + */ +void MM_MapTxDma + ( + PLM_DEVICE_BLOCK pDevice, + struct _LM_PACKET *pPacket, + T3_64BIT_HOST_ADDR *paddr, + LM_UINT32 *len, + int frag) +{ + PUM_PACKET pUmPacket = (PUM_PACKET) pPacket; + *len = pPacket->PacketSize; + MM_SetT3Addr(paddr, (dma_addr_t) pUmPacket->skbuff); +} + +/* + * Convert an mbuf address, a CPU local virtual address, + * to a physical address as seen from a PCI device. Store the + * result at paddr. + */ +void MM_MapRxDma( + PLM_DEVICE_BLOCK pDevice, + struct _LM_PACKET *pPacket, + T3_64BIT_HOST_ADDR *paddr) +{ + PUM_PACKET pUmPacket = (PUM_PACKET) pPacket; + MM_SetT3Addr(paddr, (dma_addr_t) pUmPacket->skbuff); +} + +void +MM_SetAddr (LM_PHYSICAL_ADDRESS *paddr, dma_addr_t addr) +{ +#if (BITS_PER_LONG == 64) + paddr->High = ((unsigned long) addr) >> 32; + paddr->Low = ((unsigned long) addr) & 0xffffffff; +#else + paddr->High = 0; + paddr->Low = (unsigned long) addr; +#endif +} + +void +MM_SetT3Addr(T3_64BIT_HOST_ADDR *paddr, dma_addr_t addr) +{ + unsigned long baddr = (unsigned long) addr; +#if (BITS_PER_LONG == 64) + set_64bit_addr(paddr, baddr & 0xffffffff, baddr >> 32); +#else + set_64bit_addr(paddr, baddr, 0); +#endif +} + +/* + * This combination of `inline' and `extern' has almost the effect of a + * macro. The way to use it is to put a function definition in a header + * file with these keywords, and put another copy of the definition + * (lacking `inline' and `extern') in a library file. The definition in + * the header file will cause most calls to the function to be inlined. + * If any uses of the function remain, they will refer to the single copy + * in the library. + */ +void +atomic_set(atomic_t* entry, int val) +{ + entry->counter = val; +} +int +atomic_read(atomic_t* entry) +{ + return entry->counter; +} +void +atomic_inc(atomic_t* entry) +{ + if(entry) + entry->counter++; +} + +void +atomic_dec(atomic_t* entry) +{ + if(entry) + entry->counter--; +} + +void +atomic_sub(int a, atomic_t* entry) +{ + if(entry) + entry->counter -= a; +} + +void +atomic_add(int a, atomic_t* entry) +{ + if(entry) + entry->counter += a; +} + +/******************************************************************************/ +/* Description: */ +/* */ +/* Return: */ +/******************************************************************************/ +void +QQ_InitQueue( +PQQ_CONTAINER pQueue, +unsigned int QueueSize) { + pQueue->Head = 0; + pQueue->Tail = 0; + pQueue->Size = QueueSize+1; + atomic_set(&pQueue->EntryCnt, 0); +} /* QQ_InitQueue */ + + + +/******************************************************************************/ +/* Description: */ +/* */ +/* Return: */ +/******************************************************************************/ +char +QQ_Full( +PQQ_CONTAINER pQueue) { + unsigned int NewHead; + + NewHead = (pQueue->Head + 1) % pQueue->Size; + + return(NewHead == pQueue->Tail); +} /* QQ_Full */ + + + +/******************************************************************************/ +/* Description: */ +/* */ +/* Return: */ +/******************************************************************************/ +char +QQ_Empty( +PQQ_CONTAINER pQueue) { + return(pQueue->Head == pQueue->Tail); +} /* QQ_Empty */ + + + +/******************************************************************************/ +/* Description: */ +/* */ +/* Return: */ +/******************************************************************************/ +unsigned int +QQ_GetSize( +PQQ_CONTAINER pQueue) { + return pQueue->Size; +} /* QQ_GetSize */ + + + +/******************************************************************************/ +/* Description: */ +/* */ +/* Return: */ +/******************************************************************************/ +unsigned int +QQ_GetEntryCnt( +PQQ_CONTAINER pQueue) { + return atomic_read(&pQueue->EntryCnt); +} /* QQ_GetEntryCnt */ + + + +/******************************************************************************/ +/* Description: */ +/* */ +/* Return: */ +/* TRUE entry was added successfully. */ +/* FALSE queue is full. */ +/******************************************************************************/ +char +QQ_PushHead( +PQQ_CONTAINER pQueue, +PQQ_ENTRY pEntry) { + unsigned int Head; + + Head = (pQueue->Head + 1) % pQueue->Size; + +#if !defined(QQ_NO_OVERFLOW_CHECK) + if(Head == pQueue->Tail) { + return 0; + } /* if */ +#endif /* QQ_NO_OVERFLOW_CHECK */ + + pQueue->Array[pQueue->Head] = pEntry; + wmb(); + pQueue->Head = Head; + atomic_inc(&pQueue->EntryCnt); + + return -1; +} /* QQ_PushHead */ + + + +/******************************************************************************/ +/* Description: */ +/* */ +/* Return: */ +/* TRUE entry was added successfully. */ +/* FALSE queue is full. */ +/******************************************************************************/ +char +QQ_PushTail( +PQQ_CONTAINER pQueue, +PQQ_ENTRY pEntry) { + unsigned int Tail; + + Tail = pQueue->Tail; + if(Tail == 0) { + Tail = pQueue->Size; + } /* if */ + Tail--; + +#if !defined(QQ_NO_OVERFLOW_CHECK) + if(Tail == pQueue->Head) { + return 0; + } /* if */ +#endif /* QQ_NO_OVERFLOW_CHECK */ + + pQueue->Array[Tail] = pEntry; + wmb(); + pQueue->Tail = Tail; + atomic_inc(&pQueue->EntryCnt); + + return -1; +} /* QQ_PushTail */ + + + +/******************************************************************************/ +/* Description: */ +/* */ +/* Return: */ +/******************************************************************************/ +PQQ_ENTRY +QQ_PopHead( +PQQ_CONTAINER pQueue) { + unsigned int Head; + PQQ_ENTRY Entry; + + Head = pQueue->Head; + +#if !defined(QQ_NO_UNDERFLOW_CHECK) + if(Head == pQueue->Tail) { + return (PQQ_ENTRY) 0; + } /* if */ +#endif /* QQ_NO_UNDERFLOW_CHECK */ + + if(Head == 0) { + Head = pQueue->Size; + } /* if */ + Head--; + + Entry = pQueue->Array[Head]; + membar(); + + pQueue->Head = Head; + atomic_dec(&pQueue->EntryCnt); + + return Entry; +} /* QQ_PopHead */ + + + +/******************************************************************************/ +/* Description: */ +/* */ +/* Return: */ +/******************************************************************************/ +PQQ_ENTRY +QQ_PopTail( +PQQ_CONTAINER pQueue) { + unsigned int Tail; + PQQ_ENTRY Entry; + + Tail = pQueue->Tail; + +#if !defined(QQ_NO_UNDERFLOW_CHECK) + if(Tail == pQueue->Head) { + return (PQQ_ENTRY) 0; + } /* if */ +#endif /* QQ_NO_UNDERFLOW_CHECK */ + + Entry = pQueue->Array[Tail]; + membar(); + pQueue->Tail = (Tail + 1) % pQueue->Size; + atomic_dec(&pQueue->EntryCnt); + + return Entry; +} /* QQ_PopTail */ + + + +/******************************************************************************/ +/* Description: */ +/* */ +/* Return: */ +/******************************************************************************/ +PQQ_ENTRY +QQ_GetHead( + PQQ_CONTAINER pQueue, + unsigned int Idx) +{ + if(Idx >= atomic_read(&pQueue->EntryCnt)) + { + return (PQQ_ENTRY) 0; + } + + if(pQueue->Head > Idx) + { + Idx = pQueue->Head - Idx; + } + else + { + Idx = pQueue->Size - (Idx - pQueue->Head); + } + Idx--; + + return pQueue->Array[Idx]; +} + + + +/******************************************************************************/ +/* Description: */ +/* */ +/* Return: */ +/******************************************************************************/ +PQQ_ENTRY +QQ_GetTail( + PQQ_CONTAINER pQueue, + unsigned int Idx) +{ + if(Idx >= atomic_read(&pQueue->EntryCnt)) + { + return (PQQ_ENTRY) 0; + } + + Idx += pQueue->Tail; + if(Idx >= pQueue->Size) + { + Idx = Idx - pQueue->Size; + } + + return pQueue->Array[Idx]; +} + +#endif /* CFG_CMD_NET, !CONFIG_NET_MULTI, CONFIG_BCM570x */ diff --git a/include/cmd_disk.h b/include/cmd_disk.h new file mode 100644 index 0000000000..d3bdb31293 --- /dev/null +++ b/include/cmd_disk.h @@ -0,0 +1,57 @@ +/* + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * Harddisk support + */ +#ifndef _CMD_DISK_H +#define _CMD_DISK_H + +#include +#include + +/* + * Type string for PPC bootable partitions + */ +#define BOOT_PART_TYPE "U-Boot" + +#if 0 + +typedef struct disk_partition { + ulong start; /* # of first block in partition */ + ulong size; /* number of blocks in partition */ + ulong blksz; /* block size in bytes */ + uchar name[32]; /* partition name */ + uchar type[32]; /* string type description */ +} disk_partition_t; + +int get_partition_info (block_dev_desc_t * dev_desc, int part, disk_partition_t *info); +#ifdef CONFIG_MAC_PARTITION +int get_partition_info_mac (block_dev_desc_t * dev_desc, int part, disk_partition_t *info); +#endif +#ifdef CONFIG_DOS_PARTITION +int get_partition_info_dos (block_dev_desc_t * dev_desc, int part, disk_partition_t *info); +#endif +#endif /* 0 */ + +#endif /* _CMD_DISK_H */ diff --git a/include/configs/AMX860.h b/include/configs/AMX860.h new file mode 100644 index 0000000000..420cd085f1 --- /dev/null +++ b/include/configs/AMX860.h @@ -0,0 +1,297 @@ +/* + * (C) Copyright 2001 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * board/config.h - configuration options, board specific + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + * (easy to change) + */ + +#define CONFIG_MPC860 1 +#define CONFIG_AMX860 1 + +#undef CONFIG_8xx_CONS_SMC1 /* Console is on SCC2 */ +#undef CONFIG_8xx_CONS_SMC2 +#define CONFIG_8xx_CONS_SCC2 1 +#undef CONFIG_8xx_CONS_NONE +#define CONFIG_BAUDRATE 9600 +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ + +#define MPC8XX_FACT 10 /* Multiply by 10 */ +#define MPC8XX_XIN 5000000 /* 5 MHz in */ +#define MPC8XX_HZ ((MPC8XX_XIN) * (MPC8XX_FACT)) + +#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */ + +#if 0 +#define CONFIG_BOOTDELAY -1 /* autoboot disabled */ +#else +#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ +#endif + +#define CONFIG_BOOTCOMMAND \ + "bootp;" \ + "setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):$(rootpath) " \ + "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off;" \ + "bootm" /* autoboot command */ + +#undef CONFIG_BOOTARGS + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#undef CONFIG_KGDB_ON_SMC /* define if kgdb on SMC */ +#define CONFIG_KGDB_ON_SCC /* define if kgdb on SCC */ +#undef CONFIG_KGDB_NONE /* define if kgdb on something else */ +#define CONFIG_KGDB_INDEX 1 /* which serial channel for kgdb */ +#define CONFIG_KGDB_BAUDRATE 9600 /* speed to run kgdb serial port at */ +#endif + + +#undef CONFIG_WATCHDOG /* watchdog disabled */ + +#define CONFIG_SCC1_ENET 1 /* use SCC1 ethernet */ + +#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ + +#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ + CFG_CMD_DHCP | \ + CFG_CMD_DATE ) + +#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0x0100000 /* memtest works on */ +#define CFG_MEMTEST_END 0x0200000 /* 1 ... 4 MB in DRAM */ + +#define CFG_LOAD_ADDR 0x00100000 + +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ + +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/* + * Low Level Configuration Settings + * (address mappings, register initial values, etc.) + * You should know what you are doing if you make changes here. + */ + +/*----------------------------------------------------------------------- + * Internal Memory Mapped Register + */ +#define CFG_IMMR 0xFF000000 + +/*----------------------------------------------------------------------- + * Definitions for initial stack pointer and data area (in DPRAM) + */ +#define CFG_INIT_RAM_ADDR CFG_IMMR +#define CFG_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ +#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +/*----------------------------------------------------------------------- + * Start addresses for the final memory configuration + * (Set up by the startup code) + * Please note that CFG_SDRAM_BASE _must_ start at 0 + */ +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_FLASH_BASE 0x40000000 +#if defined(DEBUG) +#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ +#else +#define CFG_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */ +#endif +#define CFG_MONITOR_BASE CFG_FLASH_BASE +#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ + +/* + * U-Boot for AMX board supports two types of memory extension + * modules: one that provides 4 MB flash memory, and another one with + * 16 MB EDO DRAM. + * + * The flash module swaps the CS0 and CS1 signals: if the module is + * installed, CS0 is connected to Flash on the module and CS1 is + * connected to the on-board Flash. This means that you must intall + * U-Boot when the Flash module is plugged in, if you plan to use + * it. + * + * To enable support for the DRAM extension card, CONFIG_AMX_RAM_EXT + * must be defined. The DRAM module uses CS1. + * + * Only one of these modules may be installed at a time. If U-Boot + * is compiled with the CONFIG_AMX_RAM_EXT option set, it will not + * work if the Flash extension module is installed instead of the + * DRAM module. + */ +#define CONFIG_AMX_RAM_EXT /* 16Mb Ext. DRAM module support */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + * + * Use 4 MB for without and 8 MB with 16 MB DRAM extension module + * (CONFIG_AMX_RAM_EXT) + */ +#ifdef CONFIG_AMX_RAM_EXT +# define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ +#else +# define CFG_BOOTMAPSZ (4 << 20) /* Initial Memory map for Linux */ +#endif +/*----------------------------------------------------------------------- + * FLASH organization + */ +#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 35 /* max number of sectors on one chip */ + +#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ + +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_OFFSET 0x8000 /* Offset of Environment Sector */ +#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */ + +/*----------------------------------------------------------------------- + * Cache Configuration + */ +#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ +#endif + +/*----------------------------------------------------------------------- + * SYPCR - System Protection Control 11-9 + * SYPCR can only be written once after reset! + *----------------------------------------------------------------------- + * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze + */ +#if defined(CONFIG_WATCHDOG) +#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \ + SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP) +#else +#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP) +#endif + +/*----------------------------------------------------------------------- + * SIUMCR - SIU Module Configuration 11-6 + *----------------------------------------------------------------------- + * PCMCIA config., multi-function pin tri-state + */ +#define CFG_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01) + +/*----------------------------------------------------------------------- + * TBSCR - Time Base Status and Control 11-26 + *----------------------------------------------------------------------- + * Clear Reference Interrupt Status, Timebase freezing enabled + */ +#define CFG_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBE) + +/*----------------------------------------------------------------------- + * PISCR - Periodic Interrupt Status and Control 11-31 + *----------------------------------------------------------------------- + * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled + */ +#define CFG_PISCR (PISCR_PS | PISCR_PITF) + +/*----------------------------------------------------------------------- + * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30 + *----------------------------------------------------------------------- + * set the PLL, the low-power modes and the reset control (15-29) + */ +#define CFG_PLPRCR (((MPC8XX_FACT-1) << PLPRCR_MF_SHIFT) | \ + PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST) + +/*----------------------------------------------------------------------- + * SCCR - System Clock and reset Control Register 15-27 + *----------------------------------------------------------------------- + * Set clock output, timebase and RTC source and divider, + * power management and some other internal clocks + */ +#define SCCR_MASK SCCR_EBDF11 +#define CFG_SCCR (SCCR_TBS|SCCR_COM00|SCCR_DFSYNC00|SCCR_DFBRG00|SCCR_DFNL000|SCCR_DFNH000|SCCR_DFLCD000|SCCR_DFALCD00) + +#define CFG_DER 0 + +/* + * Init Memory Controller: + * + * BR0/1 and OR0/1 (FLASH) + */ + +#define FLASH_BASE0_PRELIM 0x40000000 /* FLASH bank #0 */ +#ifndef CONFIG_AMX_RAM_EXT +#define FLASH_BASE1_PRELIM 0x60000000 /* FLASH bank #1 */ +#endif + +#define CFG_REMAP_OR_AM 0x80000000 /* OR addr mask */ +#define CFG_PRELIM_OR_AM 0xFFC00000 /* OR addr mask */ + +/* FLASH timing: ACS = 10, TRLX = 1, CSNT = 1, SCY = 3, EHTR = 0 */ +/* 0x00000800 0x00000400 0x00000100 0x00000030 0x00000004 */ +#define CFG_OR_TIMING_FLASH (OR_CSNT_SAM | OR_ACS_DIV4 | OR_BI | OR_SCY_5_CLK | OR_TRLX) + +#define CFG_OR0_REMAP (CFG_REMAP_OR_AM | CFG_OR_TIMING_FLASH) + +#define CFG_OR0_PRELIM 0xFFC00954 /* Real values for the board */ +#define CFG_BR0_PRELIM 0x40000001 /* Real values for the board */ + +#ifndef CONFIG_AMX_RAM_EXT +#define CFG_OR1_REMAP CFG_OR0_REMAP +#define CFG_OR1_PRELIM 0xFFC00954 /* Real values for the board */ +#define CFG_BR1_PRELIM 0x60000001 /* Real values for the board */ +#endif + +/* DSP ("Glue") Xilinx */ +#define CFG_OR6_PRELIM 0xFFFF8000 /* 32kB, 15 waits, cs after addr, no bursts */ +#define CFG_BR6_PRELIM 0x60000401 /* use GPCM for CS generation, 8 bit port */ + +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#endif /* __CONFIG_H */ diff --git a/include/configs/SXNI855T.h b/include/configs/SXNI855T.h new file mode 100644 index 0000000000..8725f27c69 --- /dev/null +++ b/include/configs/SXNI855T.h @@ -0,0 +1,357 @@ +/* + * U-Boot configuration for SIXNET SXNI855T CPU board. + * This board is based (loosely) on the Motorola FADS board, so this + * file is based (loosely) on config_FADS860T.h, see it for additional + * credits. + * + * Copyright (c) 2000-2002 Dave Ellis, SIXNET, dge@sixnetio.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +/* + * Memory map: + * + * ff100000 -> ff13ffff : FPGA CS1 + * ff030000 -> ff03ffff : EXPANSION CS7 + * ff020000 -> ff02ffff : DATA FLASH CS4 + * ff018000 -> ff01ffff : UART B CS6/UPMB + * ff010000 -> ff017fff : UART A CS5/UPMB + * ff000000 -> ff00ffff : IMAP internal to the MPC855T + * f8000000 -> fbffffff : FLASH CS0 up to 64MB + * f4000000 -> f7ffffff : NVSRAM CS2 up to 64MB + * 00000000 -> 0fffffff : SDRAM CS3/UPMA up to 256MB + */ + +/* ------------------------------------------------------------------------- */ + +/* + * board/config.h - configuration options, board specific + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + * (easy to change) + */ +#include + +#define CONFIG_SXNI855T 1 /* SIXNET IPm 855T CPU module */ + +/* The 855T is just a stripped 860T and needs code for 860, so for now + * at least define 860, 860T and 855T + */ +#define CONFIG_MPC860 1 +#define CONFIG_MPC860T 1 +#define CONFIG_MPC855T 1 + +#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ +#undef CONFIG_8xx_CONS_SMC2 +#undef CONFIG_8xx_CONS_SCC1 +#undef CONFIG_8xx_CONS_NONE +#define CONFIG_BAUDRATE 9600 +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ + +#define MPC8XX_FACT 10 /* 50 MHz is 5 MHz in times 10 */ + +#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */ + +#if 0 +#define CONFIG_BOOTDELAY -1 /* autoboot disabled */ +#else +#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ +#endif + +#define CONFIG_BOOTCOMMAND "bootm f8040000 f8100000" /* autoboot command */ +#define CONFIG_BOOTARGS "root=/dev/ram ip=off" + +#define CONFIG_MISC_INIT_R /* have misc_init_r() function */ +#define CONFIG_BOARD_POSTCLK_INIT /* have board_postclk_init() function */ + +#undef CONFIG_WATCHDOG /* watchdog disabled */ + +#define CONFIG_RTC_DS1306 /* Dallas 1306 real time clock */ + +#define CONFIG_SOFT_I2C /* I2C bit-banged */ +/* + * Software (bit-bang) I2C driver configuration + */ +#define PB_SCL 0x00000020 /* PB 26 */ +#define PB_SDA 0x00000010 /* PB 27 */ + +#define I2C_INIT (immr->im_cpm.cp_pbdir |= PB_SCL) +#define I2C_ACTIVE (immr->im_cpm.cp_pbdir |= PB_SDA) +#define I2C_TRISTATE (immr->im_cpm.cp_pbdir &= ~PB_SDA) +#define I2C_READ ((immr->im_cpm.cp_pbdat & PB_SDA) != 0) +#define I2C_SDA(bit) if(bit) immr->im_cpm.cp_pbdat |= PB_SDA; \ + else immr->im_cpm.cp_pbdat &= ~PB_SDA +#define I2C_SCL(bit) if(bit) immr->im_cpm.cp_pbdat |= PB_SCL; \ + else immr->im_cpm.cp_pbdat &= ~PB_SCL +#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */ + +# define CFG_I2C_SPEED 50000 +# define CFG_I2C_SLAVE 0xFE +# define CFG_I2C_EEPROM_ADDR 0x50 /* Atmel 24C64 */ +# define CFG_I2C_EEPROM_ADDR_LEN 2 /* two byte address */ + +#define CONFIG_FEC_ENET 1 /* use FEC ethernet */ + +#define CFG_DISCOVER_PHY + +#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_EEPROM | CFG_CMD_DATE) + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save a little memory */ +#define CFG_PROMPT "=>" /* Monitor Command Prompt */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0x0100000 /* memtest works on */ +#define CFG_MEMTEST_END 0x0400000 /* 1 ... 4 MB in DRAM */ + +#define CFG_LOAD_ADDR 0x00100000 + +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ + +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/* + * Low Level Configuration Settings + * (address mappings, register initial values, etc.) + * You should know what you are doing if you make changes here. + */ +/*----------------------------------------------------------------------- + * Internal Memory Mapped Register + */ +#define CFG_IMMR 0xFF000000 +#define CFG_IMMR_SIZE ((uint)(64 * 1024)) + +/*----------------------------------------------------------------------- + * Definitions for initial stack pointer and data area (in DPRAM) + */ +#define CFG_INIT_RAM_ADDR CFG_IMMR +#define CFG_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ +#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +/*----------------------------------------------------------------------- + * Start addresses for the final memory configuration + * (Set up by the startup code) + * Please note that CFG_SDRAM_BASE _must_ start at 0 + */ +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_SRAM_BASE 0xF4000000 +#define CFG_SRAM_SIZE 0x04000000 /* autosize up to 64Mbyte */ + +#define CFG_FLASH_BASE 0xF8000000 +#define CFG_FLASH_SIZE ((uint)(8 * 1024 * 1024)) /* max 8Mbyte */ + +#define CFG_DFLASH_BASE 0xff020000 /* DiskOnChip or NAND FLASH */ +#define CFG_DFLASH_SIZE 0x00010000 + +#define CFG_FPGA_BASE 0xFF100000 /* Xilinx FPGA */ +#define CFG_FPGA_PROG 0xFF130000 /* Programming address */ +#define CFG_FPGA_SIZE 0x00040000 /* 256KiB usable */ + +#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ +#define CFG_MONITOR_BASE CFG_FLASH_BASE +#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ +/*----------------------------------------------------------------------- + * FLASH organization + */ +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +/* Intel 28F640 has 135, 127 64K sectors in 8MB, + 8 more for 8K boot blocks. + * AMD 29LV641 has 128 64K sectors in 8MB + */ +#define CFG_MAX_FLASH_SECT 135 /* max number of sectors on one chip */ + +#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ + +/*----------------------------------------------------------------------- + * Cache Configuration + */ +#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ +#endif + +/*----------------------------------------------------------------------- + * SYPCR - System Protection Control 11-9 + * SYPCR can only be written once after reset! + *----------------------------------------------------------------------- + * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze + */ +#if defined(CONFIG_WATCHDOG) +#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \ + SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP) +#else +#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP) +#endif + +/*----------------------------------------------------------------------- + * SIUMCR - SIU Module Configuration 11-6 + *----------------------------------------------------------------------- + * PCMCIA config., multi-function pin tri-state + */ +#define CFG_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01) + +/*----------------------------------------------------------------------- + * TBSCR - Time Base Status and Control 11-26 + *----------------------------------------------------------------------- + * Clear Reference Interrupt Status, Timebase freezing enabled + */ +#define CFG_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBE) + +/*----------------------------------------------------------------------- + * PISCR - Periodic Interrupt Status and Control 11-31 + *----------------------------------------------------------------------- + * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled + */ +#define CFG_PISCR (PISCR_PS | PISCR_PITF) + +/*----------------------------------------------------------------------- + * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30 + *----------------------------------------------------------------------- + * set the PLL, the low-power modes and the reset control (15-29) + */ +#define CFG_PLPRCR (((MPC8XX_FACT-1) << PLPRCR_MF_SHIFT) | \ + PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST) + +/*----------------------------------------------------------------------- + * SCCR - System Clock and reset Control Register 15-27 + *----------------------------------------------------------------------- + * Set clock output, timebase and RTC source and divider, + * power management and some other internal clocks + */ +#define SCCR_MASK SCCR_EBDF11 +#define CFG_SCCR (SCCR_TBS|SCCR_COM00|SCCR_DFSYNC00|SCCR_DFBRG00|SCCR_DFNL000|SCCR_DFNH000|SCCR_DFLCD000|SCCR_DFALCD00) + + /*----------------------------------------------------------------------- + * + *----------------------------------------------------------------------- + * + */ +#define CFG_DER 0 + +/* Because of the way the 860 starts up and assigns CS0 the + * entire address space, we have to set the memory controller + * differently. Normally, you write the option register + * first, and then enable the chip select by writing the + * base register. For CS0, you must write the base register + * first, followed by the option register. + */ + +/* + * Init Memory Controller: + * + ********************************************************** + * BR0 and OR0 (FLASH) + */ + +#define CFG_PRELIM_OR0_AM 0xFC000000 /* OR addr mask */ + +/* FLASH timing: ACS = 10, TRLX = 1, CSNT = 1, SCY = 3, EHTR = 0 */ +#define CFG_OR_TIMING_FLASH (OR_CSNT_SAM | OR_ACS_DIV4 | OR_BI | OR_SCY_3_CLK | OR_TRLX) + +#define CFG_OR0_PRELIM (CFG_PRELIM_OR0_AM | CFG_OR_TIMING_FLASH) + +#define CONFIG_FLASH_16BIT +#define CFG_BR0_PRELIM ((CFG_FLASH_BASE & BR_BA_MSK) | BR_PS_16 | BR_V ) +#define CFG_FLASH_PROTECTION /* need to lock/unlock sectors in hardware */ + +/********************************************************** + * BR1 and OR1 (FPGA) + * These preliminary values are also the final values. + */ +#define CFG_OR_TIMING_FPGA \ + (OR_CSNT_SAM | OR_ACS_DIV2 | OR_BI | OR_SCY_5_CLK | OR_EHTR) +#define CFG_BR1_PRELIM ((CFG_FPGA_BASE & BR_BA_MSK) | BR_PS_8 | BR_V ) +#define CFG_OR1_PRELIM (((-CFG_FPGA_SIZE) & OR_AM_MSK) | CFG_OR_TIMING_FPGA) + +/********************************************************** + * BR4 and OR4 (data flash) + * These preliminary values are also the final values. + */ +#define CFG_OR_TIMING_DFLASH \ + (OR_CSNT_SAM | OR_ACS_DIV4 | OR_BI | OR_SCY_5_CLK | OR_EHTR) +#define CFG_BR4_PRELIM ((CFG_DFLASH_BASE & BR_BA_MSK) | BR_PS_8 | BR_V ) +#define CFG_OR4_PRELIM (((-CFG_DFLASH_SIZE) & OR_AM_MSK) | CFG_OR_TIMING_DFLASH) + +/********************************************************** + * BR5/6 and OR5/6 (Dual UART) + */ +#define CFG_DUART_SIZE 0x8000 /* 32K window, only uses 8 bytes */ +#define CFG_DUARTA_BASE 0xff010000 +#define CFG_DUARTB_BASE 0xff018000 + +#define DUART_MBMR 0 +#define DUART_OR_VALUE (ORMASK(CFG_DUART_SIZE) | OR_G5LS| OR_BI) +#define DUART_BR_VALUE (BR_MS_UPMB | BR_PS_8 | BR_V) +#define DUART_BR5_VALUE ((CFG_DUARTA_BASE & BR_BA_MSK ) | DUART_BR_VALUE) +#define DUART_BR6_VALUE ((CFG_DUARTB_BASE & BR_BA_MSK ) | DUART_BR_VALUE) + +/********************************************************** + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#define CONFIG_RESET_ON_PANIC /* reset if system panic() */ + +/* to put environment in EEROM */ +#define CFG_ENV_IS_IN_EEPROM 1 +#define CFG_ENV_OFFSET 0 /* Start right at beginning of NVRAM */ +#define CFG_ENV_SIZE 1024 /* Use only a part of it*/ + +#if 1 +#define CONFIG_BOOT_RETRY_TIME 60 /* boot if no command in 60 seconds */ +#endif + +#if 1 +#define CONFIG_AUTOBOOT_KEYED /* use key strings to stop autoboot */ +#define CONFIG_AUTOBOOT_PROMPT "autoboot in %d seconds\n" +#define CONFIG_AUTOBOOT_DELAY_STR "delayabit" +#define CONFIG_AUTOBOOT_STOP_STR " " /* easy to stop for now */ +#endif + +#endif /* __CONFIG_H */