From: Bin Meng Date: Wed, 19 Jul 2017 13:50:06 +0000 (+0800) Subject: configs: Remove CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS in all boards X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=cbb89ed026e761b58a2568fea7b98135abcefe21;p=u-boot.git configs: Remove CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS in all boards Now that EHCD does not use CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS, remove it in all boards' config files. Signed-off-by: Bin Meng Reviewed-by: Simon Glass Reviewed-by: Stefan Roese Tested-by: Stefan Roese --- diff --git a/arch/arm/include/asm/ehci-omap.h b/arch/arm/include/asm/ehci-omap.h index 5a53e403a6..9dbb2c4c66 100644 --- a/arch/arm/include/asm/ehci-omap.h +++ b/arch/arm/include/asm/ehci-omap.h @@ -19,11 +19,7 @@ enum usbhs_omap_port_mode { OMAP_EHCI_PORT_MODE_HSIC, }; -#ifdef CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS -#define OMAP_HS_USB_PORTS CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS -#else #define OMAP_HS_USB_PORTS 3 -#endif #define is_ehci_phy_mode(x) ((x) == OMAP_EHCI_PORT_MODE_PHY) #define is_ehci_tll_mode(x) ((x) == OMAP_EHCI_PORT_MODE_TLL) diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h index 0a2bcb2383..32c593291a 100644 --- a/include/configs/MPC8572DS.h +++ b/include/configs/MPC8572DS.h @@ -560,7 +560,6 @@ #define CONFIG_USB_EHCI_PCI #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_PCI_EHCI_DEVICE 0 -#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 2 #endif #undef CONFIG_WATCHDOG /* watchdog disabled */ diff --git a/include/configs/cm_t54.h b/include/configs/cm_t54.h index 69706d254e..8a4c333564 100644 --- a/include/configs/cm_t54.h +++ b/include/configs/cm_t54.h @@ -56,7 +56,6 @@ #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ CONFIG_SYS_SCSI_MAX_LUN) /* USB UHH support options */ -#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_OMAP_EHCI_PHY2_RESET_GPIO 76 /* HSIC2 HUB #RESET */ diff --git a/include/configs/corvus.h b/include/configs/corvus.h index ed1a2287ab..015072720e 100644 --- a/include/configs/corvus.h +++ b/include/configs/corvus.h @@ -94,9 +94,6 @@ #define CONFIG_NET_RETRY_COUNT 20 #define CONFIG_AT91_WANTS_COMMON_PHY -/* USB */ -#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 2 - #define CONFIG_MTD_DEVICE #define CONFIG_MTD_PARTITIONS diff --git a/include/configs/duovero.h b/include/configs/duovero.h index 8efcc94945..c4496a7f48 100644 --- a/include/configs/duovero.h +++ b/include/configs/duovero.h @@ -25,8 +25,6 @@ #define CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS /* USB UHH support options */ -#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3 - #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 1 #define CONFIG_OMAP_EHCI_PHY2_RESET_GPIO 62 diff --git a/include/configs/exynos5-common.h b/include/configs/exynos5-common.h index 7cb32783e6..3b73bbc525 100644 --- a/include/configs/exynos5-common.h +++ b/include/configs/exynos5-common.h @@ -134,8 +134,6 @@ /* Enable Time Command */ /* USB */ -#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3 - #define CONFIG_USB_HOST_ETHER #define CONFIG_USB_ETHER_ASIX #define CONFIG_USB_ETHER_SMSC95XX diff --git a/include/configs/ma5d4evk.h b/include/configs/ma5d4evk.h index 2744efb922..7c28a94d92 100644 --- a/include/configs/ma5d4evk.h +++ b/include/configs/ma5d4evk.h @@ -96,7 +96,6 @@ * USB */ #ifdef CONFIG_CMD_USB -#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3 /* USB device */ #define CONFIG_USB_ETHER diff --git a/include/configs/mcx.h b/include/configs/mcx.h index 73fdfbd09f..3f5fdab9a9 100644 --- a/include/configs/mcx.h +++ b/include/configs/mcx.h @@ -74,7 +74,6 @@ /* EHCI */ #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 57 -#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3 #define CONFIG_USB_HOST_ETHER #define CONFIG_USB_ETHER_ASIX #define CONFIG_USB_ETHER_MCS7830 diff --git a/include/configs/mvebu_armada-37xx.h b/include/configs/mvebu_armada-37xx.h index feb8112762..1307d215ed 100644 --- a/include/configs/mvebu_armada-37xx.h +++ b/include/configs/mvebu_armada-37xx.h @@ -93,12 +93,7 @@ #define CONFIG_NET_RETRY_COUNT 50 #define CONFIG_PHY_MARVELL -/* USB 2.0 */ -#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3 - -/* USB 3.0 */ -#define CONFIG_USB_MAX_CONTROLLER_COUNT (CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS + \ - 3) +#define CONFIG_USB_MAX_CONTROLLER_COUNT (3 + 3) /* USB ethernet */ #define CONFIG_USB_HOST_ETHER diff --git a/include/configs/mvebu_armada-8k.h b/include/configs/mvebu_armada-8k.h index da66d6407e..86ae19c9fb 100644 --- a/include/configs/mvebu_armada-8k.h +++ b/include/configs/mvebu_armada-8k.h @@ -97,12 +97,7 @@ #define CONFIG_ARP_TIMEOUT 200 #define CONFIG_NET_RETRY_COUNT 50 -/* USB 2.0 */ -#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3 - -/* USB 3.0 */ -#define CONFIG_USB_MAX_CONTROLLER_COUNT (CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS + \ - 3) +#define CONFIG_USB_MAX_CONTROLLER_COUNT (3 + 3) /* USB ethernet */ #define CONFIG_USB_HOST_ETHER diff --git a/include/configs/mx35pdk.h b/include/configs/mx35pdk.h index 9ae3d18137..8338d6df79 100644 --- a/include/configs/mx35pdk.h +++ b/include/configs/mx35pdk.h @@ -195,7 +195,6 @@ #define CONFIG_SYS_NAND_LARGEPAGE /* EHCI driver */ -#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 1 #define CONFIG_EHCI_IS_TDI #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_USB_EHCI_MXC diff --git a/include/configs/odroid.h b/include/configs/odroid.h index 9552c967c8..563854d9bb 100644 --- a/include/configs/odroid.h +++ b/include/configs/odroid.h @@ -184,7 +184,6 @@ /* USB */ #define CONFIG_USB_EHCI_EXYNOS -#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3 #define CONFIG_USB_HOST_ETHER #define CONFIG_USB_ETHER_SMSC95XX diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h index 4422d5e8d5..2fc6693579 100644 --- a/include/configs/omap3_beagle.h +++ b/include/configs/omap3_beagle.h @@ -58,7 +58,6 @@ #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 147 -#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3 #define CONFIG_USB_HOST_ETHER #define CONFIG_USB_ETHER_ASIX #define CONFIG_USB_ETHER_MCS7830 diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h index 834822df7f..133069abbc 100644 --- a/include/configs/omap3_overo.h +++ b/include/configs/omap3_overo.h @@ -41,7 +41,6 @@ /* USB EHCI */ #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 183 -#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3 /* commands to include */ diff --git a/include/configs/omap4_panda.h b/include/configs/omap4_panda.h index a973ce6a62..9951980836 100644 --- a/include/configs/omap4_panda.h +++ b/include/configs/omap4_panda.h @@ -17,8 +17,6 @@ */ /* USB UHH support options */ -#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3 - #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 1 #define CONFIG_OMAP_EHCI_PHY2_RESET_GPIO 62 diff --git a/include/configs/omap5_uevm.h b/include/configs/omap5_uevm.h index eb5e6df9ca..9b650090be 100644 --- a/include/configs/omap5_uevm.h +++ b/include/configs/omap5_uevm.h @@ -51,7 +51,6 @@ #define CONFIG_SYS_I2C_TCA642X_ADDR 0x22 /* USB UHH support options */ -#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_OMAP_EHCI_PHY2_RESET_GPIO 80 diff --git a/include/configs/picosam9g45.h b/include/configs/picosam9g45.h index 88f841dfd8..a14739f282 100644 --- a/include/configs/picosam9g45.h +++ b/include/configs/picosam9g45.h @@ -97,9 +97,6 @@ #define CONFIG_RESET_PHY_R #define CONFIG_AT91_WANTS_COMMON_PHY -/* USB */ -#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 2 - #define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE diff --git a/include/configs/poplar.h b/include/configs/poplar.h index d59f32a352..d2ecd0dec1 100644 --- a/include/configs/poplar.h +++ b/include/configs/poplar.h @@ -30,7 +30,6 @@ #define CONFIG_PL01X_SERIAL /* USB configuration */ -#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 #define CONFIG_SYS_USB_EVENT_POLL #define CONFIG_USB_HOST_ETHER diff --git a/include/configs/sama5d2_ptc.h b/include/configs/sama5d2_ptc.h index b25be974b6..401f1987ee 100644 --- a/include/configs/sama5d2_ptc.h +++ b/include/configs/sama5d2_ptc.h @@ -65,10 +65,6 @@ /* USB */ #define CONFIG_CMD_USB -#ifdef CONFIG_CMD_USB -#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3 -#endif - /* USB device */ #define CONFIG_USB_GADGET #define CONFIG_USB_GADGET_DUALSPEED diff --git a/include/configs/snapper9g45.h b/include/configs/snapper9g45.h index 2c5f2648ee..47dd99100b 100644 --- a/include/configs/snapper9g45.h +++ b/include/configs/snapper9g45.h @@ -60,9 +60,6 @@ #define CONFIG_TFTP_PORT #define CONFIG_TFTP_TSIZE -/* USB */ -#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 2 - /* MMC */ #define CONFIG_GENERIC_ATMEL_MCI diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h index fefd58f769..681c91cf46 100644 --- a/include/configs/sunxi-common.h +++ b/include/configs/sunxi-common.h @@ -310,7 +310,6 @@ extern int soft_i2c_gpio_scl; #define CONFIG_USB_OHCI_NEW #define CONFIG_USB_OHCI_SUNXI #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1 -#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 1 #endif #ifdef CONFIG_USB_MUSB_SUNXI diff --git a/include/configs/tam3517-common.h b/include/configs/tam3517-common.h index a9991fc6b8..fb173ebfb4 100644 --- a/include/configs/tam3517-common.h +++ b/include/configs/tam3517-common.h @@ -67,7 +67,6 @@ 115200} /* EHCI */ #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 25 -#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3 /* commands to include */ #define CONFIG_CMD_NAND /* NAND support */ diff --git a/include/configs/tao3530.h b/include/configs/tao3530.h index 38f5bd015f..08134f4a1e 100644 --- a/include/configs/tao3530.h +++ b/include/configs/tao3530.h @@ -228,7 +228,6 @@ /* USB EHCI */ #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 162 -#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3 #define CONFIG_USB_HOST_ETHER #define CONFIG_USB_ETHER_SMSC95XX diff --git a/include/configs/tegra114-common.h b/include/configs/tegra114-common.h index 107a0f8803..75d2065177 100644 --- a/include/configs/tegra114-common.h +++ b/include/configs/tegra114-common.h @@ -63,6 +63,5 @@ /* For USB EHCI controller */ #define CONFIG_EHCI_IS_TDI #define CONFIG_USB_EHCI_TXFIFO_THRESH 0x10 -#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 1 #endif /* _TEGRA114_COMMON_H_ */ diff --git a/include/configs/tegra124-common.h b/include/configs/tegra124-common.h index 8cf9bac156..0d61753c03 100644 --- a/include/configs/tegra124-common.h +++ b/include/configs/tegra124-common.h @@ -65,7 +65,6 @@ /* For USB EHCI controller */ #define CONFIG_EHCI_IS_TDI #define CONFIG_USB_EHCI_TXFIFO_THRESH 0x10 -#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 1 /* GPU needs setup */ #define CONFIG_TEGRA_GPU diff --git a/include/configs/tegra20-common.h b/include/configs/tegra20-common.h index db1cc248f4..342ffbe5b2 100644 --- a/include/configs/tegra20-common.h +++ b/include/configs/tegra20-common.h @@ -82,7 +82,6 @@ */ #define CONFIG_USB_EHCI_TXFIFO_THRESH 10 #define CONFIG_EHCI_IS_TDI -#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 1 #define CONFIG_SYS_NAND_SELF_INIT #define CONFIG_SYS_NAND_ONFI_DETECTION diff --git a/include/configs/tegra210-common.h b/include/configs/tegra210-common.h index 874fe34d4f..4c05576a90 100644 --- a/include/configs/tegra210-common.h +++ b/include/configs/tegra210-common.h @@ -68,7 +68,6 @@ /* For USB EHCI controller */ #define CONFIG_EHCI_IS_TDI #define CONFIG_USB_EHCI_TXFIFO_THRESH 0x10 -#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 1 /* GPU needs setup */ #define CONFIG_TEGRA_GPU diff --git a/include/configs/tegra30-common.h b/include/configs/tegra30-common.h index 60838474a6..c2096fbe7e 100644 --- a/include/configs/tegra30-common.h +++ b/include/configs/tegra30-common.h @@ -64,6 +64,5 @@ /* For USB EHCI controller */ #define CONFIG_EHCI_IS_TDI #define CONFIG_USB_EHCI_TXFIFO_THRESH 0x10 -#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 1 #endif /* _TEGRA30_COMMON_H_ */ diff --git a/include/configs/vinco.h b/include/configs/vinco.h index dc35b289d4..adff1b6d7f 100644 --- a/include/configs/vinco.h +++ b/include/configs/vinco.h @@ -63,12 +63,6 @@ #endif -/* USB */ - -#ifdef CONFIG_CMD_USB -#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3 -#endif - /* USB device */ #define CONFIG_USB_ETHER #define CONFIG_USB_ETH_RNDIS diff --git a/include/configs/x86-common.h b/include/configs/x86-common.h index 1be69748b7..aa1e505e69 100644 --- a/include/configs/x86-common.h +++ b/include/configs/x86-common.h @@ -128,7 +128,6 @@ * USB configuration */ #define CONFIG_USB_EHCI_PCI -#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 12 #define CONFIG_SYS_USB_EVENT_POLL #define CONFIG_USB_HOST_ETHER diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt index 6312863c67..8f921c1a37 100644 --- a/scripts/config_whitelist.txt +++ b/scripts/config_whitelist.txt @@ -4868,7 +4868,6 @@ CONFIG_SYS_UNSPEC_STRID CONFIG_SYS_USBCTRL CONFIG_SYS_USBD_BASE CONFIG_SYS_USB_EHCI_CPU_INIT -CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS CONFIG_SYS_USB_EHCI_REGS_BASE CONFIG_SYS_USB_FAT_BOOT_PARTITION CONFIG_SYS_USB_HOST