From: Tom Rini Date: Mon, 27 Jun 2022 17:35:50 +0000 (-0400) Subject: i2c: Remove non-DM_I2C support from davinci_i2c.c X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=cb42c1f9b168d0e561855870b11e5c02f70e2d0a;p=u-boot.git i2c: Remove non-DM_I2C support from davinci_i2c.c As the migration deadline has passed, and all platforms have been migrated, remove the non-DM code here. Signed-off-by: Tom Rini --- diff --git a/arch/arm/mach-keystone/ddr3_spd.c b/arch/arm/mach-keystone/ddr3_spd.c index c4a1908af8..6f7f8ab7b4 100644 --- a/arch/arm/mach-keystone/ddr3_spd.c +++ b/arch/arm/mach-keystone/ddr3_spd.c @@ -404,24 +404,11 @@ static void init_ddr3param(struct ddr3_spd_cb *spd_cb, static int ddr3_read_spd(ddr3_spd_eeprom_t *spd_params) { int ret; -#if !CONFIG_IS_ENABLED(DM_I2C) - int old_bus; - - i2c_init(CONFIG_SYS_DAVINCI_I2C_SPEED, CONFIG_SYS_DAVINCI_I2C_SLAVE); - - old_bus = i2c_get_bus_num(); - i2c_set_bus_num(1); - - ret = i2c_read(0x53, 0, 1, (unsigned char *)spd_params, 256); - - i2c_set_bus_num(old_bus); -#else struct udevice *dev; ret = i2c_get_chip_for_busnum(1, 0x53, 1, &dev); if (!ret) ret = dm_i2c_read(dev, 0, (unsigned char *)spd_params, 256); -#endif if (ret) { printf("Cannot read DIMM params\n"); return 1; diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig index d25c5736ef..72d06e4972 100644 --- a/drivers/i2c/Kconfig +++ b/drivers/i2c/Kconfig @@ -687,9 +687,9 @@ config SYS_I2C_SPEED config SYS_I2C_BUS_MAX int "Max I2C busses" - depends on ARCH_KEYSTONE || ARCH_OMAP2PLUS || ARCH_SOCFPGA + depends on ARCH_OMAP2PLUS || ARCH_SOCFPGA default 2 if TI816X - default 3 if OMAP34XX || AM33XX || AM43XX || ARCH_KEYSTONE + default 3 if OMAP34XX || AM33XX || AM43XX default 4 if ARCH_SOCFPGA || OMAP44XX || TI814X default 5 if OMAP54XX help diff --git a/drivers/i2c/davinci_i2c.c b/drivers/i2c/davinci_i2c.c index a4abd25c39..ae177227de 100644 --- a/drivers/i2c/davinci_i2c.c +++ b/drivers/i2c/davinci_i2c.c @@ -21,14 +21,12 @@ #include #include "davinci_i2c.h" -#if CONFIG_IS_ENABLED(DM_I2C) /* Information about i2c controller */ struct i2c_bus { int id; uint speed; struct i2c_regs *regs; }; -#endif #define CHECK_NACK() \ do {\ @@ -340,99 +338,6 @@ static int _davinci_i2c_probe_chip(struct i2c_regs *i2c_base, uint8_t chip) return rc; } -#if !CONFIG_IS_ENABLED(DM_I2C) -static struct i2c_regs *davinci_get_base(struct i2c_adapter *adap) -{ - switch (adap->hwadapnr) { -#if CONFIG_SYS_I2C_BUS_MAX >= 3 - case 2: - return (struct i2c_regs *)I2C2_BASE; -#endif -#if CONFIG_SYS_I2C_BUS_MAX >= 2 - case 1: - return (struct i2c_regs *)I2C1_BASE; -#endif - case 0: - return (struct i2c_regs *)I2C_BASE; - - default: - printf("wrong hwadapnr: %d\n", adap->hwadapnr); - } - - return NULL; -} - -static uint davinci_i2c_setspeed(struct i2c_adapter *adap, uint speed) -{ - struct i2c_regs *i2c_base = davinci_get_base(adap); - uint ret; - - adap->speed = speed; - ret = _davinci_i2c_setspeed(i2c_base, speed); - - return ret; -} - -static void davinci_i2c_init(struct i2c_adapter *adap, int speed, - int slaveadd) -{ - struct i2c_regs *i2c_base = davinci_get_base(adap); - - adap->speed = speed; - _davinci_i2c_init(i2c_base, speed, slaveadd); - - return; -} - -static int davinci_i2c_read(struct i2c_adapter *adap, uint8_t chip, - uint32_t addr, int alen, uint8_t *buf, int len) -{ - struct i2c_regs *i2c_base = davinci_get_base(adap); - return _davinci_i2c_read(i2c_base, chip, addr, alen, buf, len); -} - -static int davinci_i2c_write(struct i2c_adapter *adap, uint8_t chip, - uint32_t addr, int alen, uint8_t *buf, int len) -{ - struct i2c_regs *i2c_base = davinci_get_base(adap); - - return _davinci_i2c_write(i2c_base, chip, addr, alen, buf, len); -} - -static int davinci_i2c_probe_chip(struct i2c_adapter *adap, uint8_t chip) -{ - struct i2c_regs *i2c_base = davinci_get_base(adap); - - return _davinci_i2c_probe_chip(i2c_base, chip); -} - -U_BOOT_I2C_ADAP_COMPLETE(davinci_0, davinci_i2c_init, davinci_i2c_probe_chip, - davinci_i2c_read, davinci_i2c_write, - davinci_i2c_setspeed, - CONFIG_SYS_DAVINCI_I2C_SPEED, - CONFIG_SYS_DAVINCI_I2C_SLAVE, - 0) - -#if CONFIG_SYS_I2C_BUS_MAX >= 2 -U_BOOT_I2C_ADAP_COMPLETE(davinci_1, davinci_i2c_init, davinci_i2c_probe_chip, - davinci_i2c_read, davinci_i2c_write, - davinci_i2c_setspeed, - CONFIG_SYS_DAVINCI_I2C_SPEED1, - CONFIG_SYS_DAVINCI_I2C_SLAVE1, - 1) -#endif - -#if CONFIG_SYS_I2C_BUS_MAX >= 3 -U_BOOT_I2C_ADAP_COMPLETE(davinci_2, davinci_i2c_init, davinci_i2c_probe_chip, - davinci_i2c_read, davinci_i2c_write, - davinci_i2c_setspeed, - CONFIG_SYS_DAVINCI_I2C_SPEED2, - CONFIG_SYS_DAVINCI_I2C_SLAVE2, - 2) -#endif - -#else /* CONFIG_DM_I2C */ - static int davinci_i2c_xfer(struct udevice *bus, struct i2c_msg *msg, int nmsgs) { @@ -507,5 +412,3 @@ U_BOOT_DRIVER(i2c_davinci) = { .priv_auto = sizeof(struct i2c_bus), .ops = &davinci_i2c_ops, }; - -#endif /* CONFIG_DM_I2C */ diff --git a/include/configs/legoev3.h b/include/configs/legoev3.h index 418b08e733..f0ae9248af 100644 --- a/include/configs/legoev3.h +++ b/include/configs/legoev3.h @@ -41,12 +41,6 @@ #define CONFIG_SYS_SPI_CLK clk_get(DAVINCI_SPI0_CLKID) -/* - * I2C Configuration - */ -#define CONFIG_SYS_DAVINCI_I2C_SPEED 400000 -#define CONFIG_SYS_DAVINCI_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */ - /* * U-Boot general configuration */ diff --git a/include/configs/omapl138_lcdk.h b/include/configs/omapl138_lcdk.h index c9f5004117..c644768ae7 100644 --- a/include/configs/omapl138_lcdk.h +++ b/include/configs/omapl138_lcdk.h @@ -99,8 +99,6 @@ /* * I2C Configuration */ -#define CONFIG_SYS_DAVINCI_I2C_SPEED 25000 -#define CONFIG_SYS_DAVINCI_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */ #define CONFIG_SYS_I2C_EXPANDER_ADDR 0x20 /* diff --git a/include/configs/ti_armv7_keystone2.h b/include/configs/ti_armv7_keystone2.h index bf76afaede..29a6038f89 100644 --- a/include/configs/ti_armv7_keystone2.h +++ b/include/configs/ti_armv7_keystone2.h @@ -59,14 +59,6 @@ #define CONFIG_KSNET_SERDES_SGMII2_BASE KS2_SGMII_SERDES2_BASE #define CONFIG_KSNET_SERDES_LANES_PER_SGMII KS2_LANES_PER_SGMII_SERDES -/* I2C Configuration */ -#define CONFIG_SYS_DAVINCI_I2C_SPEED 100000 -#define CONFIG_SYS_DAVINCI_I2C_SLAVE 0x10 /* SMBus host address */ -#define CONFIG_SYS_DAVINCI_I2C_SPEED1 100000 -#define CONFIG_SYS_DAVINCI_I2C_SLAVE1 0x10 /* SMBus host address */ -#define CONFIG_SYS_DAVINCI_I2C_SPEED2 100000 -#define CONFIG_SYS_DAVINCI_I2C_SLAVE2 0x10 /* SMBus host address */ - /* EEPROM definitions */ /* NAND Configuration */