From: Simon Glass Date: Wed, 21 Aug 2024 16:19:27 +0000 (-0600) Subject: doc: Add some guidelines about global data X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=cafaa1a17f765e684e3a5b52448d495c0e1da83d;p=u-boot.git doc: Add some guidelines about global data Update the documentation to provide a bit more information about how to use global data. Signed-off-by: Simon Glass --- diff --git a/doc/develop/global_data.rst b/doc/develop/global_data.rst index d143f27eed..2863154ea4 100644 --- a/doc/develop/global_data.rst +++ b/doc/develop/global_data.rst @@ -51,6 +51,31 @@ U-Boot. The value of gd has to be saved every time U-Boot is left and restored whenever U-Boot is reentered. This is also relevant for the implementation of function tracing. For setting the value of gd function set_gd() can be used. +Guidelines +---------- + +The global_data structure is placed in some memory which is available very early +after boot to allow for a minimum set of global variables during system +initialisation (until the memory controller is set up and RAM can be used). It +is the primary data structure passed from pre-relocation U-Boot to +post-relocation, i.e. ``from board_init_f()`` ``to board_init_r()``. + +The global_data struct exists for the lifetime of U-Boot. Since the struct is +used by all architectures, fields added should be useful for most architectures. +Fields which are only needed on one or two architectures can be placed in the +architecture-specific ``struct arch_global_data``. + +In any case the struct should be kept small, since it uses precious SRAM on +many boards. + +SPL also uses global data, as well as U-Boot proper, so take care to avoid +adding fields to SPL which are not actually used by SPL. You can create +access functions or macros in the header file to avoid filling the C code with +#ifdefs. + +A flags word is available, which provides a convenient means to track the state +of various initialisation phases within U-Boot. + Global data structure ---------------------