From: Gireesh Hiremath Date: Fri, 11 Jun 2021 16:13:48 +0000 (+0000) Subject: am335x, guardian: software update available status is stored in AM3352 RTC scracth... X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=caf9478624878687b7098c3037202d8892b1dee6;p=u-boot.git am335x, guardian: software update available status is stored in AM3352 RTC scracth register RTC second scratch register[32-bit]: -zero byte hold boot count value -first byte hold update available state -second byte hold version -third byte hold magic number Signed-off-by: Gireesh Hiremath Signed-off-by: Lokesh Vutla Link: https://lore.kernel.org/r/20210611161350.2141-17-Gireesh.Hiremath@in.bosch.com Gbp-Pq: Topic apertis/guardian Gbp-Pq: Name am335x-guardian-software-update-available-status-is-store.patch --- diff --git a/drivers/bootcount/Kconfig b/drivers/bootcount/Kconfig index b5ccea0d9c..0de2b7bd78 100644 --- a/drivers/bootcount/Kconfig +++ b/drivers/bootcount/Kconfig @@ -42,6 +42,25 @@ config BOOTCOUNT_AM33XX This requires the RTC clocks, etc, to be enabled prior to use and not all boards with this IP block on it will have the RTC in use. +config BOOTCOUNT_AM33XX_NVMEM + bool "Boot counter in AM33XX RTC IP block with upgrade_available flag" + depends on AM33XX + select SPL_AM33XX_ENABLE_RTC32K_OSC if AM33XX + help + Add support for maintaining bootcount,upgrade_available, + version and BOOTMAGIC in a AM33xx RTC IP block + scratch register2. + + A bootcount driver for the RTC IP block found on many TI platforms. + This requires the RTC clocks, etc, to be enabled prior to use and + not all boards with this IP block on it will have the RTC in use. + + If there is upgrade in software then "upgrade_available" is 1, + "bootcount" is incremented otherwise "upgrade_available" and + "bootcount" is always 0. So the Userspace Application must set + the "upgrade_available" and "bootcount" variable to 0, if a boot + was successfully. + config BOOTCOUNT_ENV bool "Boot counter in environment" help @@ -177,16 +196,25 @@ config SYS_BOOTCOUNT_EXT_NAME config SYS_BOOTCOUNT_ADDR hex "RAM address used for reading and writing the boot counter" - default 0x44E3E000 if BOOTCOUNT_AM33XX + default 0x44E3E000 if BOOTCOUNT_AM33XX || BOOTCOUNT_AM33XX_NVMEM default 0xE0115FF8 if ARCH_LS1043A || ARCH_LS1021A depends on BOOTCOUNT_AM33XX || BOOTCOUNT_GENERIC || BOOTCOUNT_EXT || \ - BOOTCOUNT_I2C + BOOTCOUNT_I2C || BOOTCOUNT_AM33XX_NVMEM help Set the address used for reading and writing the boot counter. config SYS_BOOTCOUNT_MAGIC hex "Magic value for the boot counter" - default 0xB001C041 + default 0xB001C041 if BOOTCOUNT_GENERIC || BOOTCOUNT_EXT || \ + BOOTCOUNT_AM33XX || BOOTCOUNT_ENV || \ + BOOTCOUNT_RAM || BOOTCOUNT_I2C || \ + BOOTCOUNT_AT91 || DM_BOOTCOUNT + default 0xB0 if BOOTCOUNT_AM33XX_NVMEM + depends on BOOTCOUNT_GENERIC || BOOTCOUNT_EXT || \ + BOOTCOUNT_AM33XX || BOOTCOUNT_ENV || \ + BOOTCOUNT_RAM || BOOTCOUNT_I2C || \ + BOOTCOUNT_AT91 || DM_BOOTCOUNT || \ + BOOTCOUNT_AM33XX_NVMEM help Set the magic value used for the boot counter. diff --git a/drivers/bootcount/Makefile b/drivers/bootcount/Makefile index 51d860b00e..12658ffdce 100644 --- a/drivers/bootcount/Makefile +++ b/drivers/bootcount/Makefile @@ -8,6 +8,7 @@ obj-$(CONFIG_BOOTCOUNT_RAM) += bootcount_ram.o obj-$(CONFIG_BOOTCOUNT_ENV) += bootcount_env.o obj-$(CONFIG_BOOTCOUNT_I2C) += bootcount_i2c.o obj-$(CONFIG_BOOTCOUNT_EXT) += bootcount_ext.o +obj-$(CONFIG_BOOTCOUNT_AM33XX_NVMEM) += bootcount_nvmem.o obj-$(CONFIG_DM_BOOTCOUNT) += bootcount-uclass.o obj-$(CONFIG_DM_BOOTCOUNT_RTC) += rtc.o diff --git a/drivers/bootcount/bootcount_nvmem.c b/drivers/bootcount/bootcount_nvmem.c new file mode 100644 index 0000000000..5f266d5ec8 --- /dev/null +++ b/drivers/bootcount/bootcount_nvmem.c @@ -0,0 +1,57 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * (C) Copyright 2011 + * Heiko Schocher, DENX Software Engineering, hs@denx.de. + * (C) Copyright 2018 Robert Bosch Power Tools GmbH. + * + * A bootcount driver for the RTC IP block found on many TI platforms. + * This requires the RTC clocks, etc, to be enabled prior to use and + * not all boards with this IP block on it will have the RTC in use. + */ + +#include +#include + +#define BC_VERSION 2 + +void bootcount_store(ulong bootcount) +{ + u8 upgrade_available = 0; + ulong val = 0; + struct davinci_rtc *reg = + (struct davinci_rtc *)CONFIG_SYS_BOOTCOUNT_ADDR; + + val = raw_bootcount_load(®->scratch2); + upgrade_available = (val >> 8) & 0x000000ff; + + /* Only update bootcount during upgrade process */ + if (!upgrade_available) + bootcount = 0; + + val = (bootcount & 0x000000ff) | + (upgrade_available << 8) | + (BC_VERSION << 16) | + (CONFIG_SYS_BOOTCOUNT_MAGIC << 24); + + /* + * write RTC kick registers to enable write + * for RTC Scratch registers. Scratch register 2 is + * used for bootcount value. + */ + writel(RTC_KICK0R_WE, ®->kick0r); + writel(RTC_KICK1R_WE, ®->kick1r); + raw_bootcount_store(®->scratch2, val); +} + +ulong bootcount_load(void) +{ + unsigned long val = 0; + struct davinci_rtc *reg = + (struct davinci_rtc *)CONFIG_SYS_BOOTCOUNT_ADDR; + + val = raw_bootcount_load(®->scratch2); + if ((val >> 24) != CONFIG_SYS_BOOTCOUNT_MAGIC) + return 0; + else + return val & 0x000000ff; +}