From: Icenowy Zheng Date: Sat, 21 Jul 2018 08:20:20 +0000 (+0800) Subject: sunxi: change SUNXI_HIGH_SRAM option to SUNXI_SRAM_ADDRESS X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=cadc7c20e57d10ff2d8c1272cd3ffa4e0bb39caa;p=u-boot.git sunxi: change SUNXI_HIGH_SRAM option to SUNXI_SRAM_ADDRESS The new Allwinner H6 SoC has its SRAM A1 at neither 0x0 nor 0x10000, but it's at 0x20000. Thus the SUNXI_HIGH_SRAM option needs to be refactored to support this new configuration. Change it to SUNXI_SRAM_ADDRESS, which holds the real address of SRAM A1 in the memory map. Signed-off-by: Icenowy Zheng Reviewed-by: Andre Przywara Acked-by: Maxime Ripard Reviewed-by: Jagan Teki Tested-by: Jagan Teki --- diff --git a/arch/arm/include/asm/arch-sunxi/spl.h b/arch/arm/include/asm/arch-sunxi/spl.h index 4277d836e5..55f2deb18d 100644 --- a/arch/arm/include/asm/arch-sunxi/spl.h +++ b/arch/arm/include/asm/arch-sunxi/spl.h @@ -11,11 +11,7 @@ #define SPL_SIGNATURE "SPL" /* marks "sunxi" SPL header */ #define SPL_HEADER_VERSION 2 -#ifdef CONFIG_SUNXI_HIGH_SRAM -#define SPL_ADDR 0x10000 -#else -#define SPL_ADDR 0x0 -#endif +#define SPL_ADDR CONFIG_SUNXI_SRAM_ADDRESS /* The low 8-bits of the 'boot_media' field in the SPL header */ #define SUNXI_BOOTED_FROM_MMC0 0 diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig index 678e33dd40..ccf4b35734 100644 --- a/arch/arm/mach-sunxi/Kconfig +++ b/arch/arm/mach-sunxi/Kconfig @@ -73,16 +73,15 @@ config SUN8I_RSB with various RSB based devices, such as AXP223, AXP8XX PMICs, and AC100/AC200 ICs. -config SUNXI_HIGH_SRAM - bool - default n +config SUNXI_SRAM_ADDRESS + hex + default 0x10000 if MACH_SUN9I || MACH_SUN50I || MACH_SUN50I_H5 + default 0x0 ---help--- Older Allwinner SoCs have their mask boot ROM mapped just below 4GB, with the first SRAM region being located at address 0. Some newer SoCs map the boot ROM at address 0 instead and move the - SRAM to 64KB, just behind the mask ROM. - Chips using the latter setup are supposed to select this option to - adjust the addresses accordingly. + SRAM to a different address. config SUNXI_A64_TIMER_ERRATUM bool @@ -257,7 +256,6 @@ config MACH_SUN9I select CPU_V7A select DRAM_SUN9I select SUN6I_PRCM - select SUNXI_HIGH_SRAM select SUNXI_GEN_SUN6I select SUN8I_RSB select SUPPORT_SPL @@ -269,7 +267,6 @@ config MACH_SUN50I select PHY_SUN4I_USB select SUNXI_DE2 select SUNXI_GEN_SUN6I - select SUNXI_HIGH_SRAM select SUPPORT_SPL select SUNXI_DRAM_DW select SUNXI_DRAM_DW_32BIT @@ -281,7 +278,6 @@ config MACH_SUN50I_H5 bool "sun50i (Allwinner H5)" select ARM64 select MACH_SUNXI_H3_H5 - select SUNXI_HIGH_SRAM select FIT select SPL_LOAD_FIT diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h index 516b5f2d08..98b5e5ec0d 100644 --- a/include/configs/sunxi-common.h +++ b/include/configs/sunxi-common.h @@ -82,20 +82,19 @@ #define CONFIG_SPL_BSS_MAX_SIZE 0x00080000 /* 512 KiB */ -#ifdef CONFIG_SUNXI_HIGH_SRAM /* * The A80's A1 sram starts at 0x00010000 rather then at 0x00000000 and is * slightly bigger. Note that it is possible to map the first 32 KiB of the * A1 at 0x00000000 like with older SoCs by writing 0x16aa0001 to the * undocumented 0x008000e0 SYS_CTRL register. Where the 16aa is a key and * the 1 actually activates the mapping of the first 32 KiB to 0x00000000. + * A64 and H5 also has SRAM A1 at 0x00010000, but no magic remap register + * is known yet. + * H6 has SRAM A1 at 0x00020000. */ -#define CONFIG_SYS_INIT_RAM_ADDR 0x10000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x08000 /* FIXME: 40 KiB ? */ -#else -#define CONFIG_SYS_INIT_RAM_ADDR 0x0 -#define CONFIG_SYS_INIT_RAM_SIZE 0x8000 /* 32 KiB */ -#endif +#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SUNXI_SRAM_ADDRESS +/* FIXME: this may be larger on some SoCs */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x8000 /* 32 KiB */ #define CONFIG_SYS_INIT_SP_OFFSET \ (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) @@ -184,7 +183,11 @@ #define CONFIG_SPL_BOARD_LOAD_IMAGE #endif -#ifdef CONFIG_SUNXI_HIGH_SRAM +/* + * We cannot use expressions here, because expressions won't be evaluated in + * autoconf.mk. + */ +#if CONFIG_SUNXI_SRAM_ADDRESS == 0x10000 #define CONFIG_SPL_TEXT_BASE 0x10060 /* sram start+header */ #define CONFIG_SPL_MAX_SIZE 0x7fa0 /* 32 KiB */ #ifdef CONFIG_ARM64