From: Peng Fan Date: Sat, 11 Jun 2022 12:21:01 +0000 (+0800) Subject: configs: drop CONFIG_SPL_ABORT_ON_RAW_IMAGE X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=ca3369df71d8ff03054965a00968e9ddee607389;p=u-boot.git configs: drop CONFIG_SPL_ABORT_ON_RAW_IMAGE CONFIG_SPL_RAW_IMAGE_SUPPORT default y has been used to replace CONFIG_SPL_ABORT_ON_RAW_IMAGE for quite some time, so drop CONFIG_SPL_ABORT_ON_RAW_IMAGE. Signed-off-by: Peng Fan --- diff --git a/include/configs/capricorn-common.h b/include/configs/capricorn-common.h index 933fcfcfd2..0bbfe0c217 100644 --- a/include/configs/capricorn-common.h +++ b/include/configs/capricorn-common.h @@ -20,7 +20,6 @@ #define CONFIG_MALLOC_F_ADDR 0x00120000 #define CONFIG_SPL_RAW_IMAGE_ARM_TRUSTED_FIRMWARE -#define CONFIG_SPL_ABORT_ON_RAW_IMAGE #endif /* CONFIG_SPL_BUILD */ diff --git a/include/configs/cgtqmx8.h b/include/configs/cgtqmx8.h index 0266d6988c..a8ff0a1317 100644 --- a/include/configs/cgtqmx8.h +++ b/include/configs/cgtqmx8.h @@ -19,7 +19,6 @@ #define CONFIG_SPL_RAW_IMAGE_ARM_TRUSTED_FIRMWARE -#define CONFIG_SPL_ABORT_ON_RAW_IMAGE #endif /* Flat Device Tree Definitions */ diff --git a/include/configs/imx8mm-cl-iot-gate.h b/include/configs/imx8mm-cl-iot-gate.h index fc738ed410..7135a83e04 100644 --- a/include/configs/imx8mm-cl-iot-gate.h +++ b/include/configs/imx8mm-cl-iot-gate.h @@ -20,7 +20,6 @@ /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ #define CONFIG_MALLOC_F_ADDR 0x912000 /* For RAW image gives a error info not panic */ -#define CONFIG_SPL_ABORT_ON_RAW_IMAGE #endif diff --git a/include/configs/imx8mm_beacon.h b/include/configs/imx8mm_beacon.h index 899d2ec34f..79ed397122 100644 --- a/include/configs/imx8mm_beacon.h +++ b/include/configs/imx8mm_beacon.h @@ -17,7 +17,6 @@ /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ #define CONFIG_MALLOC_F_ADDR 0x930000 /* For RAW image gives a error info not panic */ -#define CONFIG_SPL_ABORT_ON_RAW_IMAGE #endif diff --git a/include/configs/imx8mm_data_modul_edm_sbc.h b/include/configs/imx8mm_data_modul_edm_sbc.h index bb19aa292b..282b295497 100644 --- a/include/configs/imx8mm_data_modul_edm_sbc.h +++ b/include/configs/imx8mm_data_modul_edm_sbc.h @@ -18,7 +18,6 @@ #define CONFIG_MALLOC_F_ADDR 0x930000 /* For RAW image gives a error info not panic */ -#define CONFIG_SPL_ABORT_ON_RAW_IMAGE #endif diff --git a/include/configs/imx8mm_evk.h b/include/configs/imx8mm_evk.h index 6da09deba8..e4b2544410 100644 --- a/include/configs/imx8mm_evk.h +++ b/include/configs/imx8mm_evk.h @@ -19,7 +19,6 @@ /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ #define CONFIG_MALLOC_F_ADDR 0x930000 /* For RAW image gives a error info not panic */ -#define CONFIG_SPL_ABORT_ON_RAW_IMAGE #endif diff --git a/include/configs/imx8mm_icore_mx8mm.h b/include/configs/imx8mm_icore_mx8mm.h index a3db85004e..dfe6966c46 100644 --- a/include/configs/imx8mm_icore_mx8mm.h +++ b/include/configs/imx8mm_icore_mx8mm.h @@ -18,7 +18,6 @@ /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ # define CONFIG_MALLOC_F_ADDR 0x930000 /* For RAW image gives a error info not panic */ -# define CONFIG_SPL_ABORT_ON_RAW_IMAGE #endif /* CONFIG_SPL_BUILD */ #ifndef CONFIG_SPL_BUILD diff --git a/include/configs/imx8mm_venice.h b/include/configs/imx8mm_venice.h index 7a2ef8f533..8a6cc69b5e 100644 --- a/include/configs/imx8mm_venice.h +++ b/include/configs/imx8mm_venice.h @@ -17,7 +17,6 @@ /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ #define CONFIG_MALLOC_F_ADDR 0x930000 /* For RAW image gives a error info not panic */ -#define CONFIG_SPL_ABORT_ON_RAW_IMAGE #endif diff --git a/include/configs/imx8mn_beacon.h b/include/configs/imx8mn_beacon.h index cadad050d0..6faecbde77 100644 --- a/include/configs/imx8mn_beacon.h +++ b/include/configs/imx8mn_beacon.h @@ -18,7 +18,6 @@ #define CONFIG_MALLOC_F_ADDR 0x184000 /* For RAW image gives a error info not panic */ -#define CONFIG_SPL_ABORT_ON_RAW_IMAGE #endif /* CONFIG_SPL_BUILD */ diff --git a/include/configs/imx8mn_evk.h b/include/configs/imx8mn_evk.h index 506d1ffd5a..1396ae1422 100644 --- a/include/configs/imx8mn_evk.h +++ b/include/configs/imx8mn_evk.h @@ -18,7 +18,6 @@ #ifdef CONFIG_SPL_BUILD /* For RAW image gives a error info not panic */ -#define CONFIG_SPL_ABORT_ON_RAW_IMAGE #endif diff --git a/include/configs/imx8mn_venice.h b/include/configs/imx8mn_venice.h index 8c45c8462c..8ef55aa6eb 100644 --- a/include/configs/imx8mn_venice.h +++ b/include/configs/imx8mn_venice.h @@ -15,7 +15,6 @@ #ifdef CONFIG_SPL_BUILD /* For RAW image gives a error info not panic */ -#define CONFIG_SPL_ABORT_ON_RAW_IMAGE #endif #define MEM_LAYOUT_ENV_SETTINGS \ diff --git a/include/configs/imx8mp_evk.h b/include/configs/imx8mp_evk.h index 465e1cb4a7..618010db9f 100644 --- a/include/configs/imx8mp_evk.h +++ b/include/configs/imx8mp_evk.h @@ -18,7 +18,6 @@ #ifdef CONFIG_SPL_BUILD /*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/ -#define CONFIG_SPL_ABORT_ON_RAW_IMAGE #define CONFIG_POWER_PCA9450 diff --git a/include/configs/imx8mp_rsb3720.h b/include/configs/imx8mp_rsb3720.h index efff6b9555..1d4c057ccc 100644 --- a/include/configs/imx8mp_rsb3720.h +++ b/include/configs/imx8mp_rsb3720.h @@ -32,7 +32,6 @@ * set \ */ -#define CONFIG_SPL_ABORT_ON_RAW_IMAGE #if defined(CONFIG_NAND_BOOT) #define CONFIG_SPL_NAND_MXS diff --git a/include/configs/imx8mp_venice.h b/include/configs/imx8mp_venice.h index d9baffb3a2..fce87b1657 100644 --- a/include/configs/imx8mp_venice.h +++ b/include/configs/imx8mp_venice.h @@ -15,7 +15,6 @@ #ifdef CONFIG_SPL_BUILD /* For RAW image gives a error info not panic */ -#define CONFIG_SPL_ABORT_ON_RAW_IMAGE #endif #define MEM_LAYOUT_ENV_SETTINGS \ diff --git a/include/configs/imx8mq_cm.h b/include/configs/imx8mq_cm.h index a242d5e3e8..a5d6adfaa4 100644 --- a/include/configs/imx8mq_cm.h +++ b/include/configs/imx8mq_cm.h @@ -20,7 +20,6 @@ /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ #define CONFIG_MALLOC_F_ADDR 0x182000 /* For RAW image gives a error info not panic */ -#define CONFIG_SPL_ABORT_ON_RAW_IMAGE #endif diff --git a/include/configs/imx8mq_evk.h b/include/configs/imx8mq_evk.h index 98ddb06fe3..182f45bb74 100644 --- a/include/configs/imx8mq_evk.h +++ b/include/configs/imx8mq_evk.h @@ -21,7 +21,6 @@ /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ #define CONFIG_MALLOC_F_ADDR 0x182000 /* For RAW image gives a error info not panic */ -#define CONFIG_SPL_ABORT_ON_RAW_IMAGE #define CONFIG_POWER_PFUZE100 #define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08 diff --git a/include/configs/imx8mq_phanbell.h b/include/configs/imx8mq_phanbell.h index 1b3c0493eb..97bd504450 100644 --- a/include/configs/imx8mq_phanbell.h +++ b/include/configs/imx8mq_phanbell.h @@ -18,7 +18,6 @@ /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ #define CONFIG_MALLOC_F_ADDR 0x182000 /* For RAW image gives a error info not panic */ -#define CONFIG_SPL_ABORT_ON_RAW_IMAGE #endif /* ENET Config */ diff --git a/include/configs/imx8qm_mek.h b/include/configs/imx8qm_mek.h index f4d19f8731..b59502e589 100644 --- a/include/configs/imx8qm_mek.h +++ b/include/configs/imx8qm_mek.h @@ -20,7 +20,6 @@ #define CONFIG_SPL_RAW_IMAGE_ARM_TRUSTED_FIRMWARE -#define CONFIG_SPL_ABORT_ON_RAW_IMAGE #endif #ifdef CONFIG_AHAB_BOOT diff --git a/include/configs/imx8qxp_mek.h b/include/configs/imx8qxp_mek.h index a6aabc7add..511f6c8d9b 100644 --- a/include/configs/imx8qxp_mek.h +++ b/include/configs/imx8qxp_mek.h @@ -18,7 +18,6 @@ #define CONFIG_SPL_RAW_IMAGE_ARM_TRUSTED_FIRMWARE -#define CONFIG_SPL_ABORT_ON_RAW_IMAGE #endif #ifdef CONFIG_AHAB_BOOT diff --git a/include/configs/imx8ulp_evk.h b/include/configs/imx8ulp_evk.h index 987069447d..f9080216f1 100644 --- a/include/configs/imx8ulp_evk.h +++ b/include/configs/imx8ulp_evk.h @@ -16,7 +16,6 @@ #ifdef CONFIG_SPL_BUILD #define CONFIG_MALLOC_F_ADDR 0x22040000 -#define CONFIG_SPL_ABORT_ON_RAW_IMAGE /* For RAW image gives a error info not panic */ #endif diff --git a/include/configs/kontron_pitx_imx8m.h b/include/configs/kontron_pitx_imx8m.h index 88aaa55bef..bf336b99d6 100644 --- a/include/configs/kontron_pitx_imx8m.h +++ b/include/configs/kontron_pitx_imx8m.h @@ -22,7 +22,6 @@ /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ #define CONFIG_MALLOC_F_ADDR 0x182000 /* For RAW image gives a error info not panic */ -#define CONFIG_SPL_ABORT_ON_RAW_IMAGE #define CONFIG_POWER_PFUZE100 diff --git a/include/configs/phycore_imx8mm.h b/include/configs/phycore_imx8mm.h index a14a076172..f8c3e1f10d 100644 --- a/include/configs/phycore_imx8mm.h +++ b/include/configs/phycore_imx8mm.h @@ -20,7 +20,6 @@ /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ #define CONFIG_MALLOC_F_ADDR 0x930000 /* For RAW image gives a error info not panic */ -#define CONFIG_SPL_ABORT_ON_RAW_IMAGE #endif #define CONFIG_EXTRA_ENV_SETTINGS \ diff --git a/include/configs/phycore_imx8mp.h b/include/configs/phycore_imx8mp.h index 9c7331a416..dd0b108a89 100644 --- a/include/configs/phycore_imx8mp.h +++ b/include/configs/phycore_imx8mp.h @@ -17,7 +17,6 @@ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) #ifdef CONFIG_SPL_BUILD -#define CONFIG_SPL_ABORT_ON_RAW_IMAGE #define CONFIG_POWER_PCA9450 diff --git a/include/configs/pico-imx8mq.h b/include/configs/pico-imx8mq.h index 25ad936a06..a587570ea1 100644 --- a/include/configs/pico-imx8mq.h +++ b/include/configs/pico-imx8mq.h @@ -18,7 +18,6 @@ /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ #define CONFIG_MALLOC_F_ADDR 0x182000 /* For RAW image gives a error info not panic */ -#define CONFIG_SPL_ABORT_ON_RAW_IMAGE #endif /* ENET Config */ diff --git a/include/configs/verdin-imx8mm.h b/include/configs/verdin-imx8mm.h index 4fb0d69f57..afc507b32a 100644 --- a/include/configs/verdin-imx8mm.h +++ b/include/configs/verdin-imx8mm.h @@ -19,7 +19,6 @@ /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ #define CONFIG_MALLOC_F_ADDR 0x930000 /* For RAW image gives a error info not panic */ -#define CONFIG_SPL_ABORT_ON_RAW_IMAGE #endif #define MEM_LAYOUT_ENV_SETTINGS \ diff --git a/include/configs/verdin-imx8mp.h b/include/configs/verdin-imx8mp.h index 704a0538a9..97f537e8e0 100644 --- a/include/configs/verdin-imx8mp.h +++ b/include/configs/verdin-imx8mp.h @@ -19,7 +19,6 @@ /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ #define CONFIG_MALLOC_F_ADDR 0x184000 /* For RAW image gives a error info not panic */ -#define CONFIG_SPL_ABORT_ON_RAW_IMAGE #define CONFIG_POWER_PCA9450