From: Hans de Goede <hdegoede@redhat.com>
Date: Wed, 8 Jul 2015 14:44:22 +0000 (+0200)
Subject: sunxi: usb-phy: Never power off the usb ports
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=c9f8947e6604;p=u-boot.git

sunxi: usb-phy: Never power off the usb ports

USB devices are not really designed to get the power bounced off and on
at them. Esp. USB powered harddisks do not like this.

Currently we power off the USB ports both on a "usb reset" and when
booting the kernel, causing the usb-power to bounce off and then back
on again.

This patch removes the powering off calls, fixing the undesirable power
bouncing.

Note this requires some special handling for the OTG port:
1) We must skip the external vbus check if we've already enabled our own
vbus to avoid false positives
2) If on an usb reset we no longer detect that the id-pin is grounded, turn
off vbus as that means an external vbus may be present now

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
---

diff --git a/arch/arm/cpu/armv7/sunxi/usb_phy.c b/arch/arm/cpu/armv7/sunxi/usb_phy.c
index 4d63a7449d..b7ca5d423a 100644
--- a/arch/arm/cpu/armv7/sunxi/usb_phy.c
+++ b/arch/arm/cpu/armv7/sunxi/usb_phy.c
@@ -232,6 +232,13 @@ void sunxi_usb_phy_power_off(int index)
 		gpio_set_value(phy->gpio_vbus, 0);
 }
 
+int sunxi_usb_phy_power_is_on(int index)
+{
+	struct sunxi_usb_phy *phy = &sunxi_usb_phy[index];
+
+	return phy->power_on_count > 0;
+}
+
 int sunxi_usb_phy_vbus_detect(int index)
 {
 	struct sunxi_usb_phy *phy = &sunxi_usb_phy[index];
diff --git a/arch/arm/include/asm/arch-sunxi/usb_phy.h b/arch/arm/include/asm/arch-sunxi/usb_phy.h
index cef6c985bc..6a14cad3ff 100644
--- a/arch/arm/include/asm/arch-sunxi/usb_phy.h
+++ b/arch/arm/include/asm/arch-sunxi/usb_phy.h
@@ -16,6 +16,7 @@ void sunxi_usb_phy_init(int index);
 void sunxi_usb_phy_exit(int index);
 void sunxi_usb_phy_power_on(int index);
 void sunxi_usb_phy_power_off(int index);
+int sunxi_usb_phy_power_is_on(int index);
 int sunxi_usb_phy_vbus_detect(int index);
 int sunxi_usb_phy_id_detect(int index);
 void sunxi_usb_phy_enable_squelch_detect(int index, int enable);
diff --git a/drivers/usb/host/ehci-sunxi.c b/drivers/usb/host/ehci-sunxi.c
index 34130f8443..38d5f92ad0 100644
--- a/drivers/usb/host/ehci-sunxi.c
+++ b/drivers/usb/host/ehci-sunxi.c
@@ -67,7 +67,6 @@ static int ehci_usb_remove(struct udevice *dev)
 	if (ret)
 		return ret;
 
-	sunxi_usb_phy_power_off(priv->phy_index);
 	sunxi_usb_phy_exit(priv->phy_index);
 
 #ifdef CONFIG_SUNXI_GEN_SUN6I
diff --git a/drivers/usb/host/ohci-sunxi.c b/drivers/usb/host/ohci-sunxi.c
index e33a8f7ec2..60792726ee 100644
--- a/drivers/usb/host/ohci-sunxi.c
+++ b/drivers/usb/host/ohci-sunxi.c
@@ -69,7 +69,6 @@ static int ohci_usb_remove(struct udevice *dev)
 	if (ret)
 		return ret;
 
-	sunxi_usb_phy_power_off(priv->phy_index);
 	sunxi_usb_phy_exit(priv->phy_index);
 
 #ifdef CONFIG_SUNXI_GEN_SUN6I
diff --git a/drivers/usb/musb-new/sunxi.c b/drivers/usb/musb-new/sunxi.c
index 16a264a9dd..a146c0861f 100644
--- a/drivers/usb/musb-new/sunxi.c
+++ b/drivers/usb/musb-new/sunxi.c
@@ -196,8 +196,6 @@ static bool enabled = false;
 
 static int sunxi_musb_enable(struct musb *musb)
 {
-	int ret;
-
 	pr_debug("%s():\n", __func__);
 
 	musb_ep_select(musb->mregs, 0);
@@ -210,17 +208,26 @@ static int sunxi_musb_enable(struct musb *musb)
 	musb_writeb(musb->mregs, USBC_REG_o_VEND0, 0);
 
 	if (is_host_enabled(musb)) {
-		ret = sunxi_usb_phy_vbus_detect(0);
-		if (ret == 1) {
-			printf("A charger is plugged into the OTG: ");
-			return -ENODEV;
+		int id = sunxi_usb_phy_id_detect(0);
+
+		if (id == 1 && sunxi_usb_phy_power_is_on(0))
+			sunxi_usb_phy_power_off(0);
+
+		if (!sunxi_usb_phy_power_is_on(0)) {
+			int vbus = sunxi_usb_phy_vbus_detect(0);
+			if (vbus == 1) {
+				printf("A charger is plugged into the OTG: ");
+				return -ENODEV;
+			}
 		}
-		ret = sunxi_usb_phy_id_detect(0);
-		if (ret == 1) {
+
+		if (id == 1) {
 			printf("No host cable detected: ");
 			return -ENODEV;
 		}
-		sunxi_usb_phy_power_on(0); /* port power on */
+
+		if (!sunxi_usb_phy_power_is_on(0))
+			sunxi_usb_phy_power_on(0);
 	}
 
 	USBC_ForceVbusValidToHigh(musb->mregs);
@@ -236,9 +243,6 @@ static void sunxi_musb_disable(struct musb *musb)
 	if (!enabled)
 		return;
 
-	if (is_host_enabled(musb))
-		sunxi_usb_phy_power_off(0); /* port power off */
-
 	USBC_ForceVbusValidToLow(musb->mregs);
 	mdelay(200); /* Wait for the current session to timeout */