From: Yuantian Tang Date: Wed, 10 Jun 2020 08:13:50 +0000 (+0800) Subject: armv8: ls1028ardb: add xspi parameter to qixis command X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=c8f8830e0bae17f1163de6d413d0553ba5a67416;p=u-boot.git armv8: ls1028ardb: add xspi parameter to qixis command Add xspi boot source to qixis command to let the soc boot from flex-nor flash chip. Signed-off-by: Yuantian Tang Reviewed-by: Priyanka Jain --- diff --git a/board/freescale/common/qixis.c b/board/freescale/common/qixis.c index 591203132f..1696c24e27 100644 --- a/board/freescale/common/qixis.c +++ b/board/freescale/common/qixis.c @@ -323,6 +323,19 @@ static int qixis_reset_cmd(struct cmd_tbl *cmdtp, int flag, int argc, QIXIS_RCFG_CTL_RECONFIG_START); #else printf("Not implemented\n"); +#endif + } else if (strcmp(argv[1], "xspi") == 0) { +#ifdef QIXIS_LBMAP_XSPI + QIXIS_WRITE(rst_ctl, 0x30); + QIXIS_WRITE(rcfg_ctl, 0); + set_lbmap(QIXIS_LBMAP_XSPI); + set_rcw_src(QIXIS_RCW_SRC_XSPI); + qixis_write_i2c(offsetof(struct qixis, rcfg_ctl), + QIXIS_RCFG_CTL_RECONFIG_IDLE); + qixis_write_i2c(offsetof(struct qixis, rcfg_ctl), + QIXIS_RCFG_CTL_RECONFIG_START); +#else + printf("Not implemented\n"); #endif } else if (strcmp(argv[1], "watchdog") == 0) { static char *period[9] = {"2s", "4s", "8s", "16s", "32s", diff --git a/include/configs/ls1028ardb.h b/include/configs/ls1028ardb.h index 0745011326..e6f38f5d00 100644 --- a/include/configs/ls1028ardb.h +++ b/include/configs/ls1028ardb.h @@ -38,10 +38,10 @@ #define QIXIS_LBMAP_ALTBANK 0x00 #define QIXIS_LBMAP_SD 0x00 #define QIXIS_LBMAP_EMMC 0x00 -#define QIXIS_LBMAP_QSPI 0x00 +#define QIXIS_LBMAP_XSPI 0x00 #define QIXIS_RCW_SRC_SD 0xf8 #define QIXIS_RCW_SRC_EMMC 0xf9 -#define QIXIS_RCW_SRC_QSPI 0xff +#define QIXIS_RCW_SRC_XSPI 0xff #define QIXIS_RST_CTL_RESET 0x31 #define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x10 #define QIXIS_RCFG_CTL_RECONFIG_START 0x11