From: Michal Simek Date: Thu, 9 Jul 2020 13:57:56 +0000 (+0200) Subject: xilinx: Setup bootm variables X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=c8da6513c054c150640e8ad12185bd53ae1852fc;p=u-boot.git xilinx: Setup bootm variables On system with PL DDR which is placed before PS DDR in DT env_get_bootm_size() and env_get_bootm_low() without specifying bootm_low and bootm_size variables are taking by default gd->bd->bi_dram[0].start and gd->bd->bi_dram[0].size. As you see 0 means bank 0 which doesn't need to be PS ddr and even can be memory above 39bit VA which is what U-Boot supports now. That's why setup bootm variables based on ram_base/ram_size setting to make sure that boot images are placed to the same location as U-Boot is placed. This location should be by default location where OS can boot from. Signed-off-by: Michal Simek --- diff --git a/board/xilinx/common/board.c b/board/xilinx/common/board.c index 0469e2e7ac..3bca3a25a9 100644 --- a/board/xilinx/common/board.c +++ b/board/xilinx/common/board.c @@ -86,5 +86,8 @@ int board_late_init_xilinx(void) initrd_hi = round_down(initrd_hi, SZ_16M); env_set_addr("initrd_high", (void *)initrd_hi); + env_set_addr("bootm_low", (void *)gd->ram_base); + env_set_addr("bootm_size", (void *)gd->ram_size); + return 0; }