From: Patrice Chotard Date: Thu, 18 Jan 2018 12:39:33 +0000 (+0100) Subject: ARM: dts: stm32: Add STM32F429 Evaluation board support X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=c7ea4b0e091e05db2d8131e305d99e81926afea2;p=u-boot.git ARM: dts: stm32: Add STM32F429 Evaluation board support This DT file comes from kernel v4.15, this board offers : _ STM32F429NIH6 microcontroller _ 4.3” color TFT LCD with resistive touchscreen (480 x 272 pixels) _ Six 5 V power supply options: Power jack ST-LINK/V2 USB connector User USB HS connector User USB FS1 connector User USB FS2 connector Daughterboard _ SAI Audio DAC, stereo audio jack which supports headset with microphone _ Stereo digital microphone, audio terminal connector used to connect external speakers _ 2 GBytes (or more) SDIO interface MicroSD card _ RF EEPROM on I2 C compatible serial interface _ RS-232 communication _ IrDA transceiver _ JTAG/SWD and ETM trace debug support, ST-LINK/V2 embedded _ IEEE-802.3-2002 compliant Ethernet connector _ Camera module _ 8M x 32-bit SDRAM, 1M x 16-bit SRAM and 8M x 16-bit NOR Flash _ Joystick with 4-directional control and selector _ Reset, Wakeup and Tamper buttons _ 4 color user LEDs _ Extension connectors & memory connectors for daughterboard or wrapping board _ USB OTG HS and FS with Micro-AB connectors _ RTC with backup battery _ CAN2.0A/B compliant connection _ Potentiometer _ Motor control connector Signed-off-by: Patrice Chotard --- diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 9540ba4313..16613aa258 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -217,6 +217,7 @@ dtb-$(CONFIG_TARGET_DRAGONBOARD410C) += dragonboard410c.dtb dtb-$(CONFIG_TARGET_DRAGONBOARD820C) += dragonboard820c.dtb dtb-$(CONFIG_STM32F4) += stm32f429-disco.dtb \ + stm32429i-eval.dtb \ stm32f469-disco.dtb dtb-$(CONFIG_STM32F7) += stm32f746-disco.dtb \ diff --git a/arch/arm/dts/stm32429i-eval.dts b/arch/arm/dts/stm32429i-eval.dts new file mode 100644 index 0000000000..362ea4245e --- /dev/null +++ b/arch/arm/dts/stm32429i-eval.dts @@ -0,0 +1,276 @@ +/* + * Copyright (C) 2015, STMicroelectronics - All Rights Reserved + * Author: Maxime Coquelin for STMicroelectronics. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/dts-v1/; +#include "stm32f429.dtsi" +#include "stm32f429-pinctrl.dtsi" +#include +#include + +/ { + model = "STMicroelectronics STM32429i-EVAL board"; + compatible = "st,stm32429i-eval", "st,stm32f429"; + + chosen { + bootargs = "root=/dev/ram"; + stdout-path = "serial0:115200n8"; + }; + + memory { + reg = <0x00000000 0x2000000>; + }; + + aliases { + serial0 = &usart1; + }; + + clocks { + clk_ext_camera: clk-ext-camera { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + }; + }; + + soc { + dma-ranges = <0xc0000000 0x0 0x10000000>; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_vref: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "vref"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + }; + + leds { + compatible = "gpio-leds"; + green { + gpios = <&gpiog 6 1>; + linux,default-trigger = "heartbeat"; + }; + orange { + gpios = <&gpiog 7 1>; + }; + red { + gpios = <&gpiog 10 1>; + }; + blue { + gpios = <&gpiog 12 1>; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + autorepeat; + button@0 { + label = "Wake up"; + linux,code = ; + gpios = <&gpioa 0 0>; + }; + button@1 { + label = "Tamper"; + linux,code = ; + gpios = <&gpioc 13 0>; + }; + }; + + usbotg_hs_phy: usbphy { + #phy-cells = <0>; + compatible = "usb-nop-xceiv"; + clocks = <&rcc 0 STM32F4_AHB1_CLOCK(OTGHSULPI)>; + clock-names = "main_clk"; + }; + + panel_rgb: panel-rgb { + compatible = "ampire,am-480272h3tmqw-t01h"; + status = "okay"; + port { + panel_in_rgb: endpoint { + remote-endpoint = <<dc_out_rgb>; + }; + }; + }; + + mmc_vcard: mmc_vcard { + compatible = "regulator-fixed"; + regulator-name = "mmc_vcard"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&adc { + pinctrl-names = "default"; + pinctrl-0 = <&adc3_in8_pin>; + vref-supply = <®_vref>; + status = "okay"; + adc3: adc@200 { + st,adc-channels = <8>; + status = "okay"; + }; +}; + +&clk_hse { + clock-frequency = <25000000>; +}; + +&crc { + status = "okay"; +}; + +&dcmi { + status = "okay"; + + port { + dcmi_0: endpoint { + remote-endpoint = <&ov2640_0>; + bus-width = <8>; + hsync-active = <0>; + vsync-active = <0>; + pclk-sample = <1>; + }; + }; +}; + +&i2c1 { + pinctrl-0 = <&i2c1_pins>; + pinctrl-names = "default"; + status = "okay"; + + ov2640: camera@30 { + compatible = "ovti,ov2640"; + reg = <0x30>; + resetb-gpios = <&stmpegpio 2 GPIO_ACTIVE_HIGH>; + pwdn-gpios = <&stmpegpio 0 GPIO_ACTIVE_LOW>; + clocks = <&clk_ext_camera>; + clock-names = "xvclk"; + status = "okay"; + + port { + ov2640_0: endpoint { + remote-endpoint = <&dcmi_0>; + }; + }; + }; + + stmpe1600: stmpe1600@42 { + compatible = "st,stmpe1600"; + reg = <0x42>; + interrupts = <8 3>; + interrupt-parent = <&gpioi>; + interrupt-controller; + wakeup-source; + + stmpegpio: stmpe_gpio { + compatible = "st,stmpe-gpio"; + gpio-controller; + #gpio-cells = <2>; + }; + }; +}; + +&iwdg { + status = "okay"; + timeout-sec = <32>; +}; + +<dc { + status = "okay"; + pinctrl-0 = <<dc_pins>; + pinctrl-names = "default"; + dma-ranges; + + port { + ltdc_out_rgb: endpoint { + remote-endpoint = <&panel_in_rgb>; + }; + }; +}; + +&mac { + status = "okay"; + pinctrl-0 = <ðernet_mii>; + pinctrl-names = "default"; + phy-mode = "mii"; + phy-handle = <&phy1>; + mdio0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + phy1: ethernet-phy@1 { + reg = <1>; + }; + }; +}; + +&rtc { + status = "okay"; +}; + +&sdio { + status = "okay"; + vmmc-supply = <&mmc_vcard>; + cd-gpios = <&stmpegpio 15 GPIO_ACTIVE_HIGH>; + cd-inverted; + pinctrl-names = "default", "opendrain"; + pinctrl-0 = <&sdio_pins>; + pinctrl-1 = <&sdio_pins_od>; + bus-width = <4>; +}; + +&timers1 { + status = "okay"; + + pwm { + pinctrl-0 = <&pwm1_pins>; + pinctrl-names = "default"; + status = "okay"; + }; + + timer@0 { + status = "okay"; + }; +}; + +&timers3 { + status = "okay"; + + pwm { + pinctrl-0 = <&pwm3_pins>; + pinctrl-names = "default"; + status = "okay"; + }; + + timer@2 { + status = "okay"; + }; +}; + +&usart1 { + pinctrl-0 = <&usart1_pins_a>; + pinctrl-names = "default"; + status = "okay"; +}; + +&usbotg_hs { + dr_mode = "host"; + phys = <&usbotg_hs_phy>; + phy-names = "usb2-phy"; + pinctrl-0 = <&usbotg_hs_pins_a>; + pinctrl-names = "default"; + status = "okay"; +};