From: Wolfgang Wegner Date: Tue, 2 Mar 2010 09:59:20 +0000 (+0100) Subject: allow MCF532x to use CONFIG_MONITOR_IS_IN_RAM X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=c7de810c79a00aa6fc08900ee0bb57bd295db733;p=u-boot.git allow MCF532x to use CONFIG_MONITOR_IS_IN_RAM CONFIG_MONITOR_IS_IN_RAM is broken for MCF532x. This patch fixes this by conditionally - removing the vector table at the beginning of code - not overwriting the vector base register - removing the code to re-set the PLL, which effectively disables SDRAM access Signed-off-by: Wolfgang Wegner --- diff --git a/cpu/mcf532x/speed.c b/cpu/mcf532x/speed.c index 0d378e63d4..67f08c7602 100644 --- a/cpu/mcf532x/speed.c +++ b/cpu/mcf532x/speed.c @@ -204,6 +204,8 @@ int clock_pll(int fsys, int flags) fout = ((fref * mfd) / (BUSDIV * 4)); #endif +/* must not tamper with SDRAMC if running from SDRAM */ +#if !defined(CONFIG_MONITOR_IS_IN_RAM) /* * Check to see if the SDRAM has already been initialized. * If it has then the SDRAM needs to be put into self refresh @@ -254,6 +256,7 @@ int clock_pll(int fsys, int flags) /* wait for DQS logic to relock */ for (i = 0; i < 0x200; i++) ; +#endif /* !defined(CONFIG_MONITOR_IS_IN_RAM) */ return fout; } diff --git a/cpu/mcf532x/start.S b/cpu/mcf532x/start.S index ff13a9f2dd..5b134aa47c 100644 --- a/cpu/mcf532x/start.S +++ b/cpu/mcf532x/start.S @@ -45,6 +45,7 @@ addl #60,%sp; /* space for 15 regs */ \ rte; +#if !defined(CONFIG_MONITOR_IS_IN_RAM) .text /* * Vector table. This is used for initial platform startup. @@ -121,6 +122,7 @@ vector192_255: .long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT .long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT .long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +#endif /* !defined(CONFIG_MONITOR_IS_IN_RAM) */ .text @@ -130,9 +132,11 @@ _start: nop move.w #0x2700,%sr /* Mask off Interrupt */ +#if !defined(CONFIG_MONITOR_IS_IN_RAM) /* Set vector base register at the beginning of the Flash */ move.l #CONFIG_SYS_FLASH_BASE, %d0 movec %d0, %VBR +#endif move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_CTRL), %d0 movec %d0, %RAMBAR1