From: Pali Rohár Date: Thu, 7 Apr 2022 10:16:22 +0000 (+0200) Subject: board: freescale: p1_p2_rdb_pc: Define SW macros for lower and upper NOR banks X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=c7d0295c25c1a4d287eb5126e78b6d380893e141;p=u-boot.git board: freescale: p1_p2_rdb_pc: Define SW macros for lower and upper NOR banks Replace hardcoded i2c hex values for NOR banks by named SW macros in map_lowernorbank/map_uppernorbank env commands. Signed-off-by: Pali Rohár Reviewed-by: Priyanka Jain --- diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h index 08e3f8de03..f6ecf2a7a8 100644 --- a/include/configs/p1_p2_rdb_pc.h +++ b/include/configs/p1_p2_rdb_pc.h @@ -21,6 +21,9 @@ #define __SW_BOOT_SD 0x9c #define __SW_BOOT_NAND 0xec #define __SW_BOOT_PCIE 0x6c +#define __SW_NOR_BANK_MASK 0xfd +#define __SW_NOR_BANK_UP 0x00 +#define __SW_NOR_BANK_LO 0x02 #define CONFIG_SYS_L2_SIZE (256 << 10) #endif @@ -46,6 +49,9 @@ #define __SW_BOOT_SD 0x24 #define __SW_BOOT_NAND 0x44 #define __SW_BOOT_PCIE 0x74 +#define __SW_NOR_BANK_MASK 0xfd +#define __SW_NOR_BANK_UP 0x00 +#define __SW_NOR_BANK_LO 0x02 #define CONFIG_SYS_L2_SIZE (256 << 10) /* * Dynamic MTD Partition support with mtdparts @@ -61,6 +67,9 @@ #define __SW_BOOT_SD2 0x18 #define __SW_BOOT_NAND 0xe8 #define __SW_BOOT_PCIE 0xa8 +#define __SW_NOR_BANK_MASK 0xfd +#define __SW_NOR_BANK_UP 0x00 +#define __SW_NOR_BANK_LO 0x02 #define CONFIG_SYS_L2_SIZE (512 << 10) /* * Dynamic MTD Partition support with mtdparts @@ -584,8 +593,8 @@ i2c mw CONFIG_SYS_I2C_PCA9557_ADDR 3 __SW_BOOT_MASK 1; reset "nandfdtaddr=80000\0" \ "ramdisk_size=120000\0" \ __VSCFW_ADDR \ -"map_lowernorbank=i2c dev "__stringify(CONFIG_SYS_SPD_BUS_NUM)"; i2c mw "__stringify(CONFIG_SYS_I2C_PCA9557_ADDR)" 1 02 1; i2c mw "__stringify(CONFIG_SYS_I2C_PCA9557_ADDR)" 3 fd 1\0" \ -"map_uppernorbank=i2c dev "__stringify(CONFIG_SYS_SPD_BUS_NUM)"; i2c mw "__stringify(CONFIG_SYS_I2C_PCA9557_ADDR)" 1 00 1; i2c mw "__stringify(CONFIG_SYS_I2C_PCA9557_ADDR)" 3 fd 1\0" \ +"map_lowernorbank=i2c dev "__stringify(CONFIG_SYS_SPD_BUS_NUM)"; i2c mw "__stringify(CONFIG_SYS_I2C_PCA9557_ADDR)" 1 "__stringify(__SW_NOR_BANK_LO)" 1; i2c mw "__stringify(CONFIG_SYS_I2C_PCA9557_ADDR)" 3 "__stringify(__SW_NOR_BANK_MASK)" 1\0" \ +"map_uppernorbank=i2c dev "__stringify(CONFIG_SYS_SPD_BUS_NUM)"; i2c mw "__stringify(CONFIG_SYS_I2C_PCA9557_ADDR)" 1 "__stringify(__SW_NOR_BANK_UP)" 1; i2c mw "__stringify(CONFIG_SYS_I2C_PCA9557_ADDR)" 3 "__stringify(__SW_NOR_BANK_MASK)" 1\0" \ __stringify(__NOR_RST_CMD)"\0" \ __stringify(__SPI_RST_CMD)"\0" \ __stringify(__SD_RST_CMD)"\0" \