From: Stephen Warren Date: Thu, 12 May 2016 19:32:55 +0000 (-0600) Subject: ARM: tegra: add core Tegra186 support X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=c7ba99c8c18a606b95a89366bc4fd94a8295772f;p=u-boot.git ARM: tegra: add core Tegra186 support This adds the bare minimum code to support Tegra186, with UART and eMMC working. The empty gpio.h is required because includes it. A future cleanup round may be able to solve this for all Tegra generations at once. mach-tegra/Makefile is adjusted not to compile anything for Tegra186, but instead to defer everything to mach-tegra/tegra186/Makefile. This allows the SoC code to pick-and-choose which of the C files in the "common" mach-tegra/ directory to compile in based on the SoC's needs. Most of the code is not valid for Tegra186, and this approach removes the need for mach-tegra/Makefile to contain many SoC-specific ifdefs. This approach may be applied to all other Tegra SoCs in a future cleanup round. board186.c is introduced to replace board.c and board2.c. These files currently contain a slew of SoC- and board-specific code that is not valid for Tegra186. This approach avoids adding yet more ifdefs to those files. A future cleanup round may refactor most of board*.c into board-/ SoC-specific functions files thus allowing the top-level functions like board_init_early_f to be shared again. Signed-off-by: Stephen Warren Reviewed-by: Simon Glass Signed-off-by: Tom Warren --- diff --git a/arch/arm/dts/tegra186.dtsi b/arch/arm/dts/tegra186.dtsi new file mode 100644 index 0000000000..18b6a26643 --- /dev/null +++ b/arch/arm/dts/tegra186.dtsi @@ -0,0 +1,56 @@ +#include "skeleton.dtsi" +#include +#include + +/ { + compatible = "nvidia,tegra186"; + #address-cells = <2>; + #size-cells = <2>; + + gpio@2200000 { + compatible = "nvidia,tegra186-gpio"; + reg-names = "security", "gpio"; + reg = + <0x0 0x2200000 0x0 0x10000>, + <0x0 0x2210000 0x0 0x10000>; + interrupts = + , + , + , + , + , + ; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + uarta: serial@3100000 { + compatible = "nvidia,tegra186-uart", "nvidia,tegra20-uart"; + reg = <0x0 0x03100000 0x0 0x10000>; + reg-shift = <2>; + status = "disabled"; + }; + + sdhci@3460000 { + compatible = "nvidia,tegra186-sdhci"; + reg = <0x0 0x03460000 0x0 0x200>; + interrupts = ; + status = "disabled"; + }; + + gpio@c2f0000 { + compatible = "nvidia,tegra186-gpio-aon"; + reg-names = "security", "gpio"; + reg = + <0x0 0xc2f0000 0x0 0x1000>, + <0x0 0xc2f1000 0x0 0x1000>; + interrupts = + ; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; +}; diff --git a/arch/arm/include/asm/arch-tegra186/gpio.h b/arch/arm/include/asm/arch-tegra186/gpio.h new file mode 100644 index 0000000000..aaecfc7ea6 --- /dev/null +++ b/arch/arm/include/asm/arch-tegra186/gpio.h @@ -0,0 +1,10 @@ +/* + * Copyright (c) 2016, NVIDIA CORPORATION. + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#ifndef _TEGRA186_GPIO_H_ +#define _TEGRA186_GPIO_H_ + +#endif diff --git a/arch/arm/include/asm/arch-tegra186/tegra.h b/arch/arm/include/asm/arch-tegra186/tegra.h new file mode 100644 index 0000000000..8031f23873 --- /dev/null +++ b/arch/arm/include/asm/arch-tegra186/tegra.h @@ -0,0 +1,16 @@ +/* + * (C) Copyright 2013-2016, NVIDIA CORPORATION. + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#ifndef _TEGRA186_TEGRA_H_ +#define _TEGRA186_TEGRA_H_ + +#define GICD_BASE 0x03881000 /* Generic Int Cntrlr Distrib */ +#define GICC_BASE 0x03882000 /* Generic Int Cntrlr CPU I/F */ +#define NV_PA_SDRAM_BASE 0x80000000 + +#include + +#endif diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig index 616a1c3cf3..b18a12e342 100644 --- a/arch/arm/mach-tegra/Kconfig +++ b/arch/arm/mach-tegra/Kconfig @@ -54,6 +54,11 @@ config TEGRA210 select TEGRA_GPIO select TEGRA_ARMV8_COMMON +config TEGRA186 + bool "Tegra186 family" + select TEGRA186_GPIO + select TEGRA_ARMV8_COMMON + endchoice config TEGRA_DISCONNECT_UDC_ON_BOOT @@ -77,5 +82,6 @@ source "arch/arm/mach-tegra/tegra30/Kconfig" source "arch/arm/mach-tegra/tegra114/Kconfig" source "arch/arm/mach-tegra/tegra124/Kconfig" source "arch/arm/mach-tegra/tegra210/Kconfig" +source "arch/arm/mach-tegra/tegra186/Kconfig" endif diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile index b2dbc6999c..12ee1cd749 100644 --- a/arch/arm/mach-tegra/Makefile +++ b/arch/arm/mach-tegra/Makefile @@ -7,6 +7,7 @@ # SPDX-License-Identifier: GPL-2.0+ # +ifndef CONFIG_TEGRA186 ifdef CONFIG_SPL_BUILD obj-y += spl.o obj-y += cpu.o @@ -30,9 +31,11 @@ obj-$(CONFIG_TEGRA_CLOCK_SCALING) += emc.o ifndef CONFIG_SPL_BUILD obj-$(CONFIG_ARMV7_PSCI) += psci.o endif +endif obj-$(CONFIG_TEGRA20) += tegra20/ obj-$(CONFIG_TEGRA30) += tegra30/ obj-$(CONFIG_TEGRA114) += tegra114/ obj-$(CONFIG_TEGRA124) += tegra124/ +obj-$(CONFIG_TEGRA186) += tegra186/ obj-$(CONFIG_TEGRA210) += tegra210/ diff --git a/arch/arm/mach-tegra/board186.c b/arch/arm/mach-tegra/board186.c new file mode 100644 index 0000000000..f4b6152a79 --- /dev/null +++ b/arch/arm/mach-tegra/board186.c @@ -0,0 +1,55 @@ +/* + * Copyright (c) 2016, NVIDIA CORPORATION. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +int dram_init(void) +{ + gd->ram_size = (1.5 * 1024 * 1024 * 1024); + return 0; +} + +int board_early_init_f(void) +{ + return 0; +} + +int board_init(void) +{ + return 0; +} + +int board_late_init(void) +{ + return 0; +} + +void dram_init_banksize(void) +{ + gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE; + gd->bd->bi_dram[0].size = gd->ram_size; +} + +void pad_init_mmc(struct mmc_host *host) +{ +} + +int board_mmc_init(bd_t *bd) +{ + tegra_mmc_init(); + + return 0; +} + +int ft_system_setup(void *blob, bd_t *bd) +{ + return 0; +} diff --git a/arch/arm/mach-tegra/tegra186/Kconfig b/arch/arm/mach-tegra/tegra186/Kconfig new file mode 100644 index 0000000000..124d8e5835 --- /dev/null +++ b/arch/arm/mach-tegra/tegra186/Kconfig @@ -0,0 +1,15 @@ +# Copyright (c) 2016, NVIDIA CORPORATION. +# +# SPDX-License-Identifier: GPL-2.0 + +if TEGRA186 + +choice + prompt "Tegra186 board select" + +endchoice + +config SYS_SOC + default "tegra186" + +endif diff --git a/arch/arm/mach-tegra/tegra186/Makefile b/arch/arm/mach-tegra/tegra186/Makefile new file mode 100644 index 0000000000..ce4610d8f8 --- /dev/null +++ b/arch/arm/mach-tegra/tegra186/Makefile @@ -0,0 +1,8 @@ +# Copyright (c) 2016, NVIDIA CORPORATION. +# +# SPDX-License-Identifier: GPL-2.0 + +obj-y += ../arm64-mmu.o +obj-y += ../board186.o +obj-y += ../lowlevel_init.o +obj-$(CONFIG_DISPLAY_CPUINFO) += ../sys_info.o diff --git a/include/configs/tegra186-common.h b/include/configs/tegra186-common.h new file mode 100644 index 0000000000..aa7b9d038a --- /dev/null +++ b/include/configs/tegra186-common.h @@ -0,0 +1,71 @@ +/* + * Copyright 2013-2016, NVIDIA CORPORATION. + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#ifndef _TEGRA186_COMMON_H_ +#define _TEGRA186_COMMON_H_ + +#include "tegra-common.h" + +/* Cortex-A57 uses a cache line size of 64 bytes */ +#define CONFIG_SYS_CACHELINE_SIZE 64 + +/* + * NS16550 Configuration + */ +#define V_NS16550_CLK 408000000 /* 408MHz (pllp_out0) */ + +/* + * Miscellaneous configurable options + */ +#define CONFIG_STACKBASE 0x82800000 /* 40MB */ + +/*----------------------------------------------------------------------- + * Physical Memory Map + */ + +#define CONFIG_SYS_TEXT_BASE 0x80080000 + +/* Generic Interrupt Controller */ +#define CONFIG_GICV2 + +/* + * Memory layout for where various images get loaded by boot scripts: + * + * scriptaddr can be pretty much anywhere that doesn't conflict with something + * else. Put it above BOOTMAPSZ to eliminate conflicts. + * + * pxefile_addr_r can be pretty much anywhere that doesn't conflict with + * something else. Put it above BOOTMAPSZ to eliminate conflicts. + * + * kernel_addr_r must be within the first 128M of RAM in order for the + * kernel's CONFIG_AUTO_ZRELADDR option to work. Since the kernel will + * decompress itself to 0x8000 after the start of RAM, kernel_addr_r + * should not overlap that area, or the kernel will have to copy itself + * somewhere else before decompression. Similarly, the address of any other + * data passed to the kernel shouldn't overlap the start of RAM. Pushing + * this up to 16M allows for a sizable kernel to be decompressed below the + * compressed load address. + * + * fdt_addr_r simply shouldn't overlap anything else. Choosing 32M allows for + * the compressed kernel to be up to 16M too. + * + * ramdisk_addr_r simply shouldn't overlap anything else. Choosing 33M allows + * for the FDT/DTB to be up to 1M, which is hopefully plenty. + */ +#define CONFIG_LOADADDR 0x80080000 +#define MEM_LAYOUT_ENV_SETTINGS \ + "scriptaddr=0x90000000\0" \ + "pxefile_addr_r=0x90100000\0" \ + "kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \ + "fdt_addr_r=0x82000000\0" \ + "ramdisk_addr_r=0x82100000\0" + +/* Defines for SPL */ +#define CONFIG_SPL_TEXT_BASE 0x80108000 +#define CONFIG_SYS_SPL_MALLOC_START 0x80090000 +#define CONFIG_SPL_STACK 0x800ffffc + +#endif