From: Jon Lin Date: Thu, 27 Apr 2023 07:35:35 +0000 (+0300) Subject: phy: rockchip: naneng-combphy: Support rk3588 X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=c5b4a012bca8e584615163ee1058d0f92ce94a26;p=u-boot.git phy: rockchip: naneng-combphy: Support rk3588 Add support for rk3588 phy variant. The PHY clock is fixed at 100MHz. Signed-off-by: Jon Lin [kever.yang@rock-chips.com: update pcie pll parameters] Co-developed-by: Kever Yang Signed-off-by: Kever Yang [eugen.hristev@collabora.com: squashed, tidy up] Signed-off-by: Eugen Hristev Reviewed-by: Kever Yang --- diff --git a/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c b/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c index b673a8da9f..d5408ccac9 100644 --- a/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c +++ b/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c @@ -58,6 +58,7 @@ struct rockchip_combphy_grfcfg { struct combphy_reg con2_for_sata; struct combphy_reg con3_for_sata; struct combphy_reg pipe_con0_for_sata; + struct combphy_reg pipe_con1_for_sata; struct combphy_reg pipe_sgmii_mac_sel; struct combphy_reg pipe_xpcs_phy_ready; struct combphy_reg u3otg0_port_en; @@ -423,11 +424,105 @@ static const struct rockchip_combphy_cfg rk3568_combphy_cfgs = { .combphy_cfg = rk3568_combphy_cfg, }; +static int rk3588_combphy_cfg(struct rockchip_combphy_priv *priv) +{ + const struct rockchip_combphy_grfcfg *cfg = priv->cfg->grfcfg; + u32 val; + + switch (priv->mode) { + case PHY_TYPE_PCIE: + param_write(priv->phy_grf, &cfg->con0_for_pcie, true); + param_write(priv->phy_grf, &cfg->con1_for_pcie, true); + param_write(priv->phy_grf, &cfg->con2_for_pcie, true); + param_write(priv->phy_grf, &cfg->con3_for_pcie, true); + break; + case PHY_TYPE_USB3: + param_write(priv->phy_grf, &cfg->pipe_txcomp_sel, false); + param_write(priv->phy_grf, &cfg->pipe_txelec_sel, false); + param_write(priv->phy_grf, &cfg->usb_mode_set, true); + break; + case PHY_TYPE_SATA: + param_write(priv->phy_grf, &cfg->con0_for_sata, true); + param_write(priv->phy_grf, &cfg->con1_for_sata, true); + param_write(priv->phy_grf, &cfg->con2_for_sata, true); + param_write(priv->phy_grf, &cfg->con3_for_sata, true); + param_write(priv->pipe_grf, &cfg->pipe_con0_for_sata, true); + param_write(priv->pipe_grf, &cfg->pipe_con1_for_sata, true); + break; + case PHY_TYPE_SGMII: + case PHY_TYPE_QSGMII: + default: + dev_err(priv->dev, "incompatible PHY type\n"); + return -EINVAL; + } + + /* 100MHz refclock signal is good */ + clk_set_rate(&priv->ref_clk, 100000000); + param_write(priv->phy_grf, &cfg->pipe_clk_100m, true); + if (priv->mode == PHY_TYPE_PCIE) { + /* PLL KVCO tuning fine */ + val = readl(priv->mmio + (0x20 << 2)); + val &= ~GENMASK(4, 2); + val |= 0x4 << 2; + writel(val, priv->mmio + (0x20 << 2)); + + /* Set up rx_trim: PLL LPF C1 85pf R1 1.25kohm */ + val = 0x4c; + writel(val, priv->mmio + (0x1b << 2)); + + /* Set up su_trim: T3 */ + val = 0xb0; + writel(val, priv->mmio + (0xa << 2)); + val = 0x47; + writel(val, priv->mmio + (0xb << 2)); + val = 0x57; + writel(val, priv->mmio + (0xd << 2)); + } + + return 0; +} + +static const struct rockchip_combphy_grfcfg rk3588_combphy_grfcfgs = { + /* pipe-phy-grf */ + .pcie_mode_set = { 0x0000, 5, 0, 0x00, 0x11 }, + .usb_mode_set = { 0x0000, 5, 0, 0x00, 0x04 }, + .pipe_rxterm_set = { 0x0000, 12, 12, 0x00, 0x01 }, + .pipe_txelec_set = { 0x0004, 1, 1, 0x00, 0x01 }, + .pipe_txcomp_set = { 0x0004, 4, 4, 0x00, 0x01 }, + .pipe_clk_25m = { 0x0004, 14, 13, 0x00, 0x01 }, + .pipe_clk_100m = { 0x0004, 14, 13, 0x00, 0x02 }, + .pipe_rxterm_sel = { 0x0008, 8, 8, 0x00, 0x01 }, + .pipe_txelec_sel = { 0x0008, 12, 12, 0x00, 0x01 }, + .pipe_txcomp_sel = { 0x0008, 15, 15, 0x00, 0x01 }, + .pipe_clk_ext = { 0x000c, 9, 8, 0x02, 0x01 }, + .pipe_phy_status = { 0x0034, 6, 6, 0x01, 0x00 }, + .con0_for_pcie = { 0x0000, 15, 0, 0x00, 0x1000 }, + .con1_for_pcie = { 0x0004, 15, 0, 0x00, 0x0000 }, + .con2_for_pcie = { 0x0008, 15, 0, 0x00, 0x0101 }, + .con3_for_pcie = { 0x000c, 15, 0, 0x00, 0x0200 }, + .con0_for_sata = { 0x0000, 15, 0, 0x00, 0x0129 }, + .con1_for_sata = { 0x0004, 15, 0, 0x00, 0x0040 }, + .con2_for_sata = { 0x0008, 15, 0, 0x00, 0x80c1 }, + .con3_for_sata = { 0x000c, 15, 0, 0x00, 0x0407 }, + /* pipe-grf */ + .pipe_con0_for_sata = { 0x0000, 11, 5, 0x00, 0x22 }, + .pipe_con1_for_sata = { 0x0000, 2, 0, 0x00, 0x2 }, +}; + +static const struct rockchip_combphy_cfg rk3588_combphy_cfgs = { + .grfcfg = &rk3588_combphy_grfcfgs, + .combphy_cfg = rk3588_combphy_cfg, +}; + static const struct udevice_id rockchip_combphy_ids[] = { { .compatible = "rockchip,rk3568-naneng-combphy", .data = (ulong)&rk3568_combphy_cfgs }, + { + .compatible = "rockchip,rk3588-naneng-combphy", + .data = (ulong)&rk3588_combphy_cfgs + }, { } };