From: Andre Przywara Date: Tue, 29 Jan 2019 15:54:13 +0000 (+0000) Subject: mmc: sunxi: Add DM clk and reset support X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=c57572eb5aac7191026a069e8980a0faf01f2455;p=u-boot.git mmc: sunxi: Add DM clk and reset support Now that we have the gate clocks and the reset gates in our new Allwinner clock driver, let's make use of them in the MMC driver, when DM_MMC is defined. We treat the reset device as optional now, as the older SoCs don't implement it. Signed-off-by: Andre Przywara Reviewed-by: Jagan Teki --- diff --git a/drivers/mmc/sunxi_mmc.c b/drivers/mmc/sunxi_mmc.c index 0c443a732d..488e772881 100644 --- a/drivers/mmc/sunxi_mmc.c +++ b/drivers/mmc/sunxi_mmc.c @@ -12,6 +12,8 @@ #include #include #include +#include +#include #include #include #include @@ -21,7 +23,6 @@ #ifdef CONFIG_DM_MMC struct sunxi_mmc_variant { - u16 gate_offset; u16 mclk_offset; }; #endif @@ -607,9 +608,11 @@ static int sunxi_mmc_probe(struct udevice *dev) struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev); struct sunxi_mmc_plat *plat = dev_get_platdata(dev); struct sunxi_mmc_priv *priv = dev_get_priv(dev); + struct reset_ctl_bulk reset_bulk; + struct clk gate_clk; struct mmc_config *cfg = &plat->cfg; struct ofnode_phandle_args args; - u32 *gate_reg, *ccu_reg; + u32 *ccu_reg; int bus_width, ret; cfg->name = dev->name; @@ -641,8 +644,14 @@ static int sunxi_mmc_probe(struct udevice *dev) priv->mmc_no = ((uintptr_t)priv->reg - SUNXI_MMC0_BASE) / 0x1000; priv->mclkreg = (void *)ccu_reg + (priv->variant->mclk_offset + (priv->mmc_no * 4)); - gate_reg = (void *)ccu_reg + priv->variant->gate_offset; - setbits_le32(gate_reg, BIT(AHB_GATE_OFFSET_MMC(priv->mmc_no))); + + ret = clk_get_by_name(dev, "ahb", &gate_clk); + if (!ret) + clk_enable(&gate_clk); + + ret = reset_get_bulk(dev, &reset_bulk); + if (!ret) + reset_deassert_bulk(&reset_bulk); ret = mmc_set_mod_clk(priv, 24000000); if (ret) @@ -676,7 +685,6 @@ static int sunxi_mmc_bind(struct udevice *dev) } static const struct sunxi_mmc_variant sun4i_a10_variant = { - .gate_offset = 0x60, .mclk_offset = 0x88, };