From: Claudius Heine Date: Wed, 29 Apr 2020 13:04:23 +0000 (+0200) Subject: ARM: imx8m: Don't use the addr parameter of reset_cpu() X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=c5635a032a4bc63148c3ecd09c4cc49632b4fa4a;p=u-boot.git ARM: imx8m: Don't use the addr parameter of reset_cpu() imx8m has the only implementation of reset_cpu() which does not ignore the addr parameter and instead gives it some meaning as the base address of watchdog registers. This breaks convention with the rest of U-Boot where the parameter is ignored and callers are passing in 0. Fixes: d2041725e84b ("imx8m: restrict reset_cpu") Co-developed-by: Harald Seiler Signed-off-by: Harald Seiler Signed-off-by: Claudius Heine --- diff --git a/arch/arm/mach-imx/imx8m/soc.c b/arch/arm/mach-imx/imx8m/soc.c index f0a0e1bbf8..89229da3b6 100644 --- a/arch/arm/mach-imx/imx8m/soc.c +++ b/arch/arm/mach-imx/imx8m/soc.c @@ -412,10 +412,7 @@ int ft_system_setup(void *blob, bd_t *bd) #if !CONFIG_IS_ENABLED(SYSRESET) void reset_cpu(ulong addr) { - struct watchdog_regs *wdog = (struct watchdog_regs *)addr; - - if (!addr) - wdog = (struct watchdog_regs *)WDOG1_BASE_ADDR; + struct watchdog_regs *wdog = (struct watchdog_regs *)WDOG1_BASE_ADDR; /* Clear WDA to trigger WDOG_B immediately */ writew((SET_WCR_WT(1) | WCR_WDT | WCR_WDE | WCR_SRS), &wdog->wcr);