From: Tom Rini Date: Mon, 20 Jun 2022 12:07:51 +0000 (-0400) Subject: m68k: Remove unused PCI code X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=c55094f14d3362c9bceba867d0faecc733125f83;p=u-boot.git m68k: Remove unused PCI code The only mcf5445x platform does not enable PCI, drop this code. Signed-off-by: Tom Rini --- diff --git a/arch/m68k/cpu/mcf5445x/Makefile b/arch/m68k/cpu/mcf5445x/Makefile index ba90fc3c34..6a38c4838e 100644 --- a/arch/m68k/cpu/mcf5445x/Makefile +++ b/arch/m68k/cpu/mcf5445x/Makefile @@ -6,4 +6,4 @@ # ccflags-y += -DET_DEBUG extra-y = start.o -obj-y = cpu.o speed.o cpu_init.o interrupts.o pci.o dspi.o +obj-y = cpu.o speed.o cpu_init.o interrupts.o dspi.o diff --git a/arch/m68k/cpu/mcf5445x/pci.c b/arch/m68k/cpu/mcf5445x/pci.c deleted file mode 100644 index d487468d0b..0000000000 --- a/arch/m68k/cpu/mcf5445x/pci.c +++ /dev/null @@ -1,151 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) 2004-2007, 2012 Freescale Semiconductor, Inc. - * TsiChung Liew (Tsi-Chung.Liew@freescale.com) - */ - -/* - * PCI Configuration space access support - */ -#include -#include -#include -#include -#include - -#if defined(CONFIG_PCI) -/* System RAM mapped over PCI */ -#define CONFIG_SYS_PCI_SYS_MEM_BUS CONFIG_SYS_SDRAM_BASE -#define CONFIG_SYS_PCI_SYS_MEM_PHYS CONFIG_SYS_SDRAM_BASE -#define CONFIG_SYS_PCI_SYS_MEM_SIZE (1024 * 1024 * 1024) - -#define cfg_read(val, addr, type, op) *val = op((type)(addr)); -#define cfg_write(val, addr, type, op) op((type *)(addr), (val)); - -#define PCI_OP(rw, size, type, op, mask) \ -int pci_##rw##_cfg_##size(struct pci_controller *hose, \ - pci_dev_t dev, int offset, type val) \ -{ \ - u32 addr = PCI_CONF1_ADDRESS(PCI_BUS(dev), PCI_DEV(dev), \ - PCI_FUNC(dev), offset); \ - out_be32(hose->cfg_addr, addr); \ - cfg_##rw(val, hose->cfg_data + (offset & mask), type, op); \ - out_be32(hose->cfg_addr, addr & ~PCI_CONF1_ENABLE); \ - return 0; \ -} - -PCI_OP(read, byte, u8 *, in_8, 3) -PCI_OP(read, word, u16 *, in_le16, 2) -PCI_OP(read, dword, u32 *, in_le32, 0) -PCI_OP(write, byte, u8, out_8, 3) -PCI_OP(write, word, u16, out_le16, 2) -PCI_OP(write, dword, u32, out_le32, 0) - -void pci_mcf5445x_init(struct pci_controller *hose) -{ - pci_t *pci = (pci_t *)MMAP_PCI; - pciarb_t *pciarb = (pciarb_t *)MMAP_PCIARB; - gpio_t *gpio = (gpio_t *) MMAP_GPIO; - u32 barEn = 0; - - out_be32(&pciarb->acr, 0x001f001f); - - /* Set PCIGNT1, PCIREQ1, PCIREQ0/PCIGNTIN, PCIGNT0/PCIREQOUT, - PCIREQ2, PCIGNT2 */ - out_be16(&gpio->par_pci, - GPIO_PAR_PCI_GNT3_GNT3 | GPIO_PAR_PCI_GNT2 | - GPIO_PAR_PCI_GNT1 | GPIO_PAR_PCI_GNT0 | - GPIO_PAR_PCI_REQ3_REQ3 | GPIO_PAR_PCI_REQ2 | - GPIO_PAR_PCI_REQ1 | GPIO_PAR_PCI_REQ0); - - /* Assert reset bit */ - setbits_be32(&pci->gscr, PCI_GSCR_PR); - - setbits_be32(&pci->tcr1, PCI_TCR1_P); - - /* Initiator windows */ - out_be32(&pci->iw0btar, - CONFIG_SYS_PCI_MEM_PHYS | (CONFIG_SYS_PCI_MEM_PHYS >> 16)); - out_be32(&pci->iw1btar, - CONFIG_SYS_PCI_IO_PHYS | (CONFIG_SYS_PCI_IO_PHYS >> 16)); - out_be32(&pci->iw2btar, - CONFIG_SYS_PCI_CFG_PHYS | (CONFIG_SYS_PCI_CFG_PHYS >> 16)); - - out_be32(&pci->iwcr, - PCI_IWCR_W0C_EN | PCI_IWCR_W1C_EN | PCI_IWCR_W1C_IO | - PCI_IWCR_W2C_EN | PCI_IWCR_W2C_IO); - - out_be32(&pci->icr, 0); - - /* Enable bus master and mem access */ - out_be32(&pci->scr, PCI_SCR_B | PCI_SCR_M); - - /* Cache line size and master latency */ - out_be32(&pci->cr1, PCI_CR1_CLS(8) | PCI_CR1_LTMR(0xF8)); - out_be32(&pci->cr2, 0); - -#ifdef CONFIG_SYS_PCI_BAR0 - out_be32(&pci->bar0, PCI_BAR_BAR0(CONFIG_SYS_PCI_BAR0)); - out_be32(&pci->tbatr0, CONFIG_SYS_PCI_TBATR0 | PCI_TBATR_EN); - barEn |= PCI_TCR2_B0E; -#endif -#ifdef CONFIG_SYS_PCI_BAR1 - out_be32(&pci->bar1, PCI_BAR_BAR1(CONFIG_SYS_PCI_BAR1)); - out_be32(&pci->tbatr1, CONFIG_SYS_PCI_TBATR1 | PCI_TBATR_EN); - barEn |= PCI_TCR2_B1E; -#endif -#ifdef CONFIG_SYS_PCI_BAR2 - out_be32(&pci->bar2, PCI_BAR_BAR2(CONFIG_SYS_PCI_BAR2)); - out_be32(&pci->tbatr2, CONFIG_SYS_PCI_TBATR2 | PCI_TBATR_EN); - barEn |= PCI_TCR2_B2E; -#endif -#ifdef CONFIG_SYS_PCI_BAR3 - out_be32(&pci->bar3, PCI_BAR_BAR3(CONFIG_SYS_PCI_BAR3)); - out_be32(&pci->tbatr3, CONFIG_SYS_PCI_TBATR3 | PCI_TBATR_EN); - barEn |= PCI_TCR2_B3E; -#endif -#ifdef CONFIG_SYS_PCI_BAR4 - out_be32(&pci->bar4, PCI_BAR_BAR4(CONFIG_SYS_PCI_BAR4)); - out_be32(&pci->tbatr4, CONFIG_SYS_PCI_TBATR4 | PCI_TBATR_EN); - barEn |= PCI_TCR2_B4E; -#endif -#ifdef CONFIG_SYS_PCI_BAR5 - out_be32(&pci->bar5, PCI_BAR_BAR5(CONFIG_SYS_PCI_BAR5)); - out_be32(&pci->tbatr5, CONFIG_SYS_PCI_TBATR5 | PCI_TBATR_EN); - barEn |= PCI_TCR2_B5E; -#endif - - out_be32(&pci->tcr2, barEn); - - /* Deassert reset bit */ - clrbits_be32(&pci->gscr, PCI_GSCR_PR); - udelay(1000); - - /* Enable PCI bus master support */ - hose->first_busno = 0; - hose->last_busno = 0xff; - - pci_set_region(hose->regions + 0, CONFIG_SYS_PCI_MEM_BUS, CONFIG_SYS_PCI_MEM_PHYS, - CONFIG_SYS_PCI_MEM_SIZE, PCI_REGION_MEM); - - pci_set_region(hose->regions + 1, CONFIG_SYS_PCI_IO_BUS, CONFIG_SYS_PCI_IO_PHYS, - CONFIG_SYS_PCI_IO_SIZE, PCI_REGION_IO); - - pci_set_region(hose->regions + 2, CONFIG_SYS_PCI_SYS_MEM_BUS, - CONFIG_SYS_PCI_SYS_MEM_PHYS, CONFIG_SYS_PCI_SYS_MEM_SIZE, - PCI_REGION_MEM | PCI_REGION_SYS_MEMORY); - - hose->region_count = 3; - - hose->cfg_addr = &(pci->car); - hose->cfg_data = (volatile unsigned char *)CONFIG_SYS_PCI_CFG_BUS; - - pci_set_ops(hose, pci_read_cfg_byte, pci_read_cfg_word, - pci_read_cfg_dword, pci_write_cfg_byte, pci_write_cfg_word, - pci_write_cfg_dword); - - /* Hose scan */ - pci_register_hose(hose); - hose->last_busno = pci_hose_scan(hose); -} -#endif /* CONFIG_PCI */