From: Stefano Babic Date: Tue, 6 Jul 2010 15:05:06 +0000 (+0200) Subject: Use common function to set GPIOs for MX3 and MX5 X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=c4ea142424fc5cb43a2db750cb772e84304e5fb8;p=u-boot.git Use common function to set GPIOs for MX3 and MX5 The patch adds support for setting gpios to the MX51 processor and change name to the corresponding functions for MX31. In this way, it is possible to get rid of nasty #ifdef switches related to the processor type. Signed-off-by: Stefano Babic --- diff --git a/arch/arm/include/asm/arch-mx31/mx31-regs.h b/arch/arm/include/asm/arch-mx31/mx31-regs.h index d72585c8a0..f05e743d76 100644 --- a/arch/arm/include/asm/arch-mx31/mx31-regs.h +++ b/arch/arm/include/asm/arch-mx31/mx31-regs.h @@ -57,6 +57,14 @@ struct clock_control_regs { u32 pdr2; }; +/* GPIO Registers */ +struct gpio_regs { + u32 gpio_dr; + u32 gpio_dir; + u32 gpio_psr; +}; + + /* Bit definitions for RCSR register in CCM */ #define CCM_RCSR_NF16B (1 << 31) #define CCM_RCSR_NFMS (1 << 30) @@ -153,9 +161,9 @@ struct clock_control_regs { /* * GPIO */ -#define GPIO1_BASE 0x53FCC000 -#define GPIO2_BASE 0x53FD0000 -#define GPIO3_BASE 0x53FA4000 +#define GPIO1_BASE_ADDR 0x53FCC000 +#define GPIO2_BASE_ADDR 0x53FD0000 +#define GPIO3_BASE_ADDR 0x53FA4000 #define GPIO_DR 0x00000000 /* data register */ #define GPIO_GDIR 0x00000004 /* direction register */ #define GPIO_PSR 0x00000008 /* pad status register */ diff --git a/arch/arm/include/asm/arch-mx31/mx31.h b/arch/arm/include/asm/arch-mx31/mx31.h index f702d260f1..5a5aa114a7 100644 --- a/arch/arm/include/asm/arch-mx31/mx31.h +++ b/arch/arm/include/asm/arch-mx31/mx31.h @@ -28,31 +28,6 @@ extern u32 mx31_get_ipg_clk(void); #define imx_get_uartclk mx31_get_ipg_clk extern void mx31_gpio_mux(unsigned long mode); -enum mx31_gpio_direction { - MX31_GPIO_DIRECTION_IN, - MX31_GPIO_DIRECTION_OUT, -}; - -#ifdef CONFIG_MX31_GPIO -extern int mx31_gpio_direction(unsigned int gpio, - enum mx31_gpio_direction direction); -extern void mx31_gpio_set(unsigned int gpio, unsigned int value); -extern int mx31_gpio_get(unsigned int gpio); -#else -static inline int mx31_gpio_direction(unsigned int gpio, - enum mx31_gpio_direction direction) -{ - return 1; -} -static inline int mx31_gpio_get(unsigned int gpio) -{ - return 1; -} -static inline void mx31_gpio_set(unsigned int gpio, unsigned int value) -{ -} -#endif - void mx31_uart1_hw_init(void); void mx31_spi2_hw_init(void); diff --git a/arch/arm/include/asm/arch-mx51/imx-regs.h b/arch/arm/include/asm/arch-mx51/imx-regs.h index 3887d3cec4..0e3bc2a4fb 100644 --- a/arch/arm/include/asm/arch-mx51/imx-regs.h +++ b/arch/arm/include/asm/arch-mx51/imx-regs.h @@ -256,6 +256,12 @@ struct weim { u32 cswcr2; }; +/* GPIO Registers */ +struct gpio_regs { + u32 gpio_dr; + u32 gpio_dir; + u32 gpio_psr; +}; #endif /* __ASSEMBLER__*/ #endif /* __ASM_ARCH_MXC_MX51_H__ */ diff --git a/board/davedenx/qong/qong.c b/board/davedenx/qong/qong.c index e509383e8f..9abc29c5f7 100644 --- a/board/davedenx/qong/qong.c +++ b/board/davedenx/qong/qong.c @@ -27,6 +27,7 @@ #include #include #include +#include #include "qong_fpga.h" DECLARE_GLOBAL_DATA_PTR; @@ -41,9 +42,9 @@ int dram_init (void) static void qong_fpga_reset(void) { - mx31_gpio_set(QONG_FPGA_RST_PIN, 0); + mxc_gpio_set(QONG_FPGA_RST_PIN, 0); udelay(30); - mx31_gpio_set(QONG_FPGA_RST_PIN, 1); + mxc_gpio_set(QONG_FPGA_RST_PIN, 1); udelay(300); } @@ -66,11 +67,11 @@ int board_early_init_f (void) /* FPGA reset Pin */ /* rstn = 0 */ - mx31_gpio_set(QONG_FPGA_RST_PIN, 0); - mx31_gpio_direction(QONG_FPGA_RST_PIN, MX31_GPIO_DIRECTION_OUT); + mxc_gpio_set(QONG_FPGA_RST_PIN, 0); + mxc_gpio_direction(QONG_FPGA_RST_PIN, MXC_GPIO_DIRECTION_OUT); /* set interrupt pin as input */ - mx31_gpio_direction(QONG_FPGA_IRQ_PIN, MX31_GPIO_DIRECTION_IN); + mxc_gpio_direction(QONG_FPGA_IRQ_PIN, MXC_GPIO_DIRECTION_IN); #endif @@ -206,27 +207,27 @@ static void board_nand_setup(void) qong_fpga_reset(); /* Enable NAND flash */ - mx31_gpio_set(15, 1); - mx31_gpio_set(14, 1); - mx31_gpio_direction(15, MX31_GPIO_DIRECTION_OUT); - mx31_gpio_direction(16, MX31_GPIO_DIRECTION_IN); - mx31_gpio_direction(14, MX31_GPIO_DIRECTION_IN); - mx31_gpio_set(15, 0); + mxc_gpio_set(15, 1); + mxc_gpio_set(14, 1); + mxc_gpio_direction(15, MXC_GPIO_DIRECTION_OUT); + mxc_gpio_direction(16, MXC_GPIO_DIRECTION_IN); + mxc_gpio_direction(14, MXC_GPIO_DIRECTION_IN); + mxc_gpio_set(15, 0); } int qong_nand_rdy(void *chip) { udelay(1); - return mx31_gpio_get(16); + return mxc_gpio_get(16); } void qong_nand_select_chip(struct mtd_info *mtd, int chip) { if (chip >= 0) - mx31_gpio_set(15, 0); + mxc_gpio_set(15, 0); else - mx31_gpio_set(15, 1); + mxc_gpio_set(15, 1); } diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index 07d395d898..a0f455223b 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -27,7 +27,7 @@ LIB := $(obj)libgpio.a COBJS-$(CONFIG_AT91_GPIO) += at91_gpio.o COBJS-$(CONFIG_KIRKWOOD_GPIO) += kw_gpio.o -COBJS-$(CONFIG_MX31_GPIO) += mx31_gpio.o +COBJS-$(CONFIG_MXC_GPIO) += mxc_gpio.o COBJS-$(CONFIG_PCA953X) += pca953x.o COBJS-$(CONFIG_S5P) += s5p_gpio.o diff --git a/drivers/gpio/mx31_gpio.c b/drivers/gpio/mxc_gpio.c similarity index 63% rename from drivers/gpio/mx31_gpio.c rename to drivers/gpio/mxc_gpio.c index b07f038156..663141f1b4 100644 --- a/drivers/gpio/mx31_gpio.c +++ b/drivers/gpio/mxc_gpio.c @@ -21,19 +21,29 @@ * MA 02111-1307 USA */ #include -#include +#ifdef CONFIG_MX31 #include +#endif +#ifdef CONFIG_MX51 +#include +#endif +#include +#include /* GPIO port description */ static unsigned long gpio_ports[] = { - [0] = GPIO1_BASE, - [1] = GPIO2_BASE, - [2] = GPIO3_BASE, + [0] = GPIO1_BASE_ADDR, + [1] = GPIO2_BASE_ADDR, + [2] = GPIO3_BASE_ADDR, +#ifdef CONFIG_MX51 + [3] = GPIO4_BASE_ADDR, +#endif }; -int mx31_gpio_direction(unsigned int gpio, enum mx31_gpio_direction direction) +int mxc_gpio_direction(unsigned int gpio, enum mxc_gpio_direction direction) { unsigned int port = gpio >> 5; + struct gpio_regs *regs; u32 l; if (port >= ARRAY_SIZE(gpio_ports)) @@ -41,22 +51,26 @@ int mx31_gpio_direction(unsigned int gpio, enum mx31_gpio_direction direction) gpio &= 0x1f; - l = __REG(gpio_ports[port] + GPIO_GDIR); + regs = (struct gpio_regs *)gpio_ports[port]; + + l = readl(®s->gpio_dir); + switch (direction) { - case MX31_GPIO_DIRECTION_OUT: + case MXC_GPIO_DIRECTION_OUT: l |= 1 << gpio; break; - case MX31_GPIO_DIRECTION_IN: + case MXC_GPIO_DIRECTION_IN: l &= ~(1 << gpio); } - __REG(gpio_ports[port] + GPIO_GDIR) = l; + writel(l, ®s->gpio_dir); return 0; } -void mx31_gpio_set(unsigned int gpio, unsigned int value) +void mxc_gpio_set(unsigned int gpio, unsigned int value) { unsigned int port = gpio >> 5; + struct gpio_regs *regs; u32 l; if (port >= ARRAY_SIZE(gpio_ports)) @@ -64,17 +78,20 @@ void mx31_gpio_set(unsigned int gpio, unsigned int value) gpio &= 0x1f; - l = __REG(gpio_ports[port] + GPIO_DR); + regs = (struct gpio_regs *)gpio_ports[port]; + + l = readl(®s->gpio_dr); if (value) l |= 1 << gpio; else l &= ~(1 << gpio); - __REG(gpio_ports[port] + GPIO_DR) = l; + writel(l, ®s->gpio_dr); } -int mx31_gpio_get(unsigned int gpio) +int mxc_gpio_get(unsigned int gpio) { unsigned int port = gpio >> 5; + struct gpio_regs *regs; u32 l; if (port >= ARRAY_SIZE(gpio_ports)) @@ -82,7 +99,9 @@ int mx31_gpio_get(unsigned int gpio) gpio &= 0x1f; - l = (__REG(gpio_ports[port] + GPIO_DR) >> gpio) & 0x01; + regs = (struct gpio_regs *)gpio_ports[port]; + + l = (readl(®s->gpio_dr) >> gpio) & 0x01; return l; } diff --git a/drivers/spi/mxc_spi.c b/drivers/spi/mxc_spi.c index e15a63caca..802cd2efb0 100644 --- a/drivers/spi/mxc_spi.c +++ b/drivers/spi/mxc_spi.c @@ -23,6 +23,7 @@ #include #include #include +#include #ifdef CONFIG_MX27 /* i.MX27 has a completely wrong register layout and register definitions in the @@ -68,9 +69,6 @@ static unsigned long spi_bases[] = { 0x53f84000, }; -#define OUT MX31_GPIO_DIRECTION_OUT -#define mxc_gpio_direction mx31_gpio_direction -#define mxc_gpio_set mx31_gpio_set #elif defined(CONFIG_MX51) #include #include @@ -111,13 +109,12 @@ static unsigned long spi_bases[] = { CSPI2_BASE_ADDR, CSPI3_BASE_ADDR, }; -#define mxc_gpio_direction(gpio, dir) (0) -#define mxc_gpio_set(gpio, value) {} -#define OUT 1 #else #error "Unsupported architecture" #endif +#define OUT MXC_GPIO_DIRECTION_OUT + struct mxc_spi_slave { struct spi_slave slave; unsigned long base; @@ -126,6 +123,7 @@ struct mxc_spi_slave { u32 cfg_reg; #endif int gpio; + int ss_pol; }; static inline struct mxc_spi_slave *to_mxc_spi_slave(struct spi_slave *slave) @@ -147,7 +145,7 @@ void spi_cs_activate(struct spi_slave *slave) { struct mxc_spi_slave *mxcs = to_mxc_spi_slave(slave); if (mxcs->gpio > 0) - mxc_gpio_set(mxcs->gpio, mxcs->ctrl_reg & MXC_CSPICTRL_SSPOL); + mxc_gpio_set(mxcs->gpio, mxcs->ss_pol); } void spi_cs_deactivate(struct spi_slave *slave) @@ -155,7 +153,7 @@ void spi_cs_deactivate(struct spi_slave *slave) struct mxc_spi_slave *mxcs = to_mxc_spi_slave(slave); if (mxcs->gpio > 0) mxc_gpio_set(mxcs->gpio, - !(mxcs->ctrl_reg & MXC_CSPICTRL_SSPOL)); + !(mxcs->ss_pol)); } #ifdef CONFIG_MX51 @@ -394,6 +392,7 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, mxcs->slave.bus = bus; mxcs->slave.cs = cs; mxcs->base = spi_bases[bus]; + mxcs->ss_pol = (mode & SPI_CS_HIGH) ? 1 : 0; #ifdef CONFIG_MX51 /* Can be used for i.MX31 too ? */ diff --git a/include/configs/imx31_phycore.h b/include/configs/imx31_phycore.h index 1dbafa0521..62944a93f6 100644 --- a/include/configs/imx31_phycore.h +++ b/include/configs/imx31_phycore.h @@ -183,7 +183,7 @@ #ifdef CONFIG_IMX31_PHYCORE_EET #define BOARD_LATE_INIT -#define CONFIG_MX31_GPIO 1 +#define CONFIG_MXC_GPIO #define CONFIG_HARD_SPI 1 #define CONFIG_MXC_SPI 1 diff --git a/include/configs/qong.h b/include/configs/qong.h index 7a68b7b97e..7cd955826d 100644 --- a/include/configs/qong.h +++ b/include/configs/qong.h @@ -52,7 +52,7 @@ #define CONFIG_MXC_UART 1 #define CONFIG_SYS_MX31_UART1 1 -#define CONFIG_MX31_GPIO +#define CONFIG_MXC_GPIO #define CONFIG_MXC_SPI #define CONFIG_DEFAULT_SPI_BUS 1 diff --git a/include/mxc_gpio.h b/include/mxc_gpio.h new file mode 100644 index 0000000000..002ba61e00 --- /dev/null +++ b/include/mxc_gpio.h @@ -0,0 +1,52 @@ +/* + * + * (c) 2007 Pengutronix, Sascha Hauer + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __MXC_GPIO_H +#define __MXC_GPIO_H + +enum mxc_gpio_direction { + MXC_GPIO_DIRECTION_IN, + MXC_GPIO_DIRECTION_OUT, +}; + +#ifdef CONFIG_MXC_GPIO +extern int mxc_gpio_direction(unsigned int gpio, + enum mxc_gpio_direction direction); +extern void mxc_gpio_set(unsigned int gpio, unsigned int value); +extern int mxc_gpio_get(unsigned int gpio); +#else +static inline int mxc_gpio_direction(unsigned int gpio, + enum mxc_gpio_direction direction) +{ + return 1; +} +static inline int mxc_gpio_get(unsigned int gpio) +{ + return 1; +} +static inline void mxc_gpio_set(unsigned int gpio, unsigned int value) +{ +} +#endif + +#endif