From: Asen Dimov <dimov@ronetix.at>
Date: Fri, 9 Dec 2011 11:00:07 +0000 (+0000)
Subject: pm9g45: init serial console before relocation
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=c4df21490179ae95ef13b92ce7980992ffb1e5f8;p=u-boot.git

pm9g45: init serial console before relocation

The early messages can be seen on the debug console.

Signed-off-by: Asen Chavdarov Dimov <dimov@ronetix.at>
---

diff --git a/board/ronetix/pm9g45/pm9g45.c b/board/ronetix/pm9g45/pm9g45.c
index d29d0763ac..b5a11f2303 100644
--- a/board/ronetix/pm9g45/pm9g45.c
+++ b/board/ronetix/pm9g45/pm9g45.c
@@ -127,22 +127,28 @@ static void pm9g45_macb_hw_init(void)
 }
 #endif
 
-int board_init(void)
+int board_early_init_f(void)
 {
 	struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
 
-	/* Enable Ctrlc */
-	console_init_f();
-
+	/* Enable clocks for all PIOs */
 	writel((1 << ATMEL_ID_PIOA) |
 		(1 << ATMEL_ID_PIOB) |
 		(1 << ATMEL_ID_PIOC) |
 		(1 << ATMEL_ID_PIODE), &pmc->pcer);
 
+	at91_seriald_hw_init();
+
+	return 0;
+}
+
+int board_init(void)
+{
+	/* arch number of AT91SAM9M10G45EK-Board */
+	gd->bd->bi_arch_number = MACH_TYPE_PM9G45;
 	/* adress of boot parameters */
 	gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
 
-	at91_seriald_hw_init();
 #ifdef CONFIG_CMD_NAND
 	pm9g45_nand_hw_init();
 #endif
diff --git a/include/configs/pm9g45.h b/include/configs/pm9g45.h
index 5b08d91097..eec9153300 100644
--- a/include/configs/pm9g45.h
+++ b/include/configs/pm9g45.h
@@ -57,6 +57,7 @@
 #define CONFIG_INITRD_TAG	1
 
 #define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_BOARD_EARLY_INIT_F
 
 /*
  * Hardware drivers