From: Stefan Roese Date: Thu, 3 Dec 2015 11:39:45 +0000 (+0100) Subject: arm: mvebu: db-mv784mp-gp: Switch from IDE to SATA support X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=c4be10b5696382c51e41e0d02fb577d3b39e8636;p=u-boot.git arm: mvebu: db-mv784mp-gp: Switch from IDE to SATA support Enable the newly introduced SATA driver for the Marvell AXP with DMA support instead of the PIO-only IDE driver. This increases the transfer speed. And is also more in-line with the Armada 38x ports, which also use a SATA driver (AHCI) and the "sata" U-Boot commands. Signed-off-by: Stefan Roese Cc: Luka Perkov --- diff --git a/include/configs/db-mv784mp-gp.h b/include/configs/db-mv784mp-gp.h index 886f313aad..65e78b80b7 100644 --- a/include/configs/db-mv784mp-gp.h +++ b/include/configs/db-mv784mp-gp.h @@ -1,5 +1,5 @@ /* - * Copyright (C) 2014 Stefan Roese + * Copyright (C) 2014-2015 Stefan Roese * * SPDX-License-Identifier: GPL-2.0+ */ @@ -30,10 +30,10 @@ #define CONFIG_CMD_DHCP #define CONFIG_CMD_ENV #define CONFIG_CMD_I2C -#define CONFIG_CMD_IDE #define CONFIG_CMD_NAND #define CONFIG_CMD_PCI #define CONFIG_CMD_PING +#define CONFIG_CMD_SATA #define CONFIG_CMD_SF #define CONFIG_CMD_SPI #define CONFIG_CMD_TFTPPUT @@ -67,32 +67,12 @@ #define CONFIG_SYS_ALT_MEMTEST /* SATA support */ -#ifdef CONFIG_CMD_IDE -#define __io -#define CONFIG_IDE_PREINIT -#define CONFIG_MVSATA_IDE - -/* Needs byte-swapping for ATA data register */ -#define CONFIG_IDE_SWAP_IO - -#define CONFIG_SYS_ATA_REG_OFFSET 0x0100 /* Offset for register access */ -#define CONFIG_SYS_ATA_DATA_OFFSET 0x0100 /* Offset for data I/O */ -#define CONFIG_SYS_ATA_ALT_OFFSET 0x0100 - -/* Each 8-bit ATA register is aligned to a 4-bytes address */ -#define CONFIG_SYS_ATA_STRIDE 4 - -/* CONFIG_CMD_IDE requires some #defines for ATA registers */ -#define CONFIG_SYS_IDE_MAXBUS 2 -#define CONFIG_SYS_IDE_MAXDEVICE CONFIG_SYS_IDE_MAXBUS - -/* ATA registers base is at SATA controller base */ -#define CONFIG_SYS_ATA_BASE_ADDR MVEBU_AXP_SATA_BASE -#define CONFIG_SYS_ATA_IDE0_OFFSET 0x2000 -#define CONFIG_SYS_ATA_IDE1_OFFSET 0x4000 - +#define CONFIG_SYS_SATA_MAX_DEVICE 2 +#define CONFIG_SATA_MV +#define CONFIG_LIBATA +#define CONFIG_LBA48 +#define CONFIG_EFI_PARTITION #define CONFIG_DOS_PARTITION -#endif /* CONFIG_CMD_IDE */ /* PCIe support */ #ifndef CONFIG_SPL_BUILD