From: Marek Vasut Date: Mon, 13 Jul 2015 00:11:02 +0000 (+0200) Subject: ddr: altera: Clean up rw_mgr_mem_calibrate_vfifo_center() part 1 X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=c4907898a1281be6cf02fecc10331a5b0f501953;p=u-boot.git ddr: altera: Clean up rw_mgr_mem_calibrate_vfifo_center() part 1 Factor out common code from rw_mgr_mem_calibrate_writes_center() and rw_mgr_mem_calibrate_vfifo_center() for searching for the right edge of the window. The code is almost identical, so pull it into separate function and cater for the minor differences. Signed-off-by: Marek Vasut --- diff --git a/drivers/ddr/altera/sequencer.c b/drivers/ddr/altera/sequencer.c index 714fdf081b..b175313db0 100644 --- a/drivers/ddr/altera/sequencer.c +++ b/drivers/ddr/altera/sequencer.c @@ -1780,6 +1780,166 @@ static int rw_mgr_mem_calibrate_vfifo_find_dqs_en_phase(const u32 grp) return ret; } +/** + * search_right_edge() - Find right edge of DQ/DQS working phase + * @write: Perform read (Stage 2) or write (Stage 3) calibration + * @rank_bgn: Rank number + * @write_group: Write Group + * @read_group: Read Group + * @start_dqs: DQS start phase + * @start_dqs_en: DQS enable start phase + * @bit_chk: Resulting bit mask after the test + * @sticky_bit_chk: Resulting sticky bit mask after the test + * @left_edge: Left edge of the DQ/DQS phase + * @right_edge: Right edge of the DQ/DQS phase + * @use_read_test: Perform read test + * + * Find right edge of DQ/DQS working phase. + */ +static int search_right_edge(const int write, const int rank_bgn, + const u32 write_group, const u32 read_group, + const int start_dqs, const int start_dqs_en, + u32 *bit_chk, u32 *sticky_bit_chk, + int *left_edge, int *right_edge, const u32 use_read_test) +{ + const u32 correct_mask = write ? param->write_correct_mask : + param->read_correct_mask; + const u32 delay_max = write ? IO_IO_OUT1_DELAY_MAX : IO_IO_IN_DELAY_MAX; + const u32 dqs_max = write ? IO_IO_OUT1_DELAY_MAX : IO_DQS_IN_DELAY_MAX; + const u32 per_dqs = write ? RW_MGR_MEM_DQ_PER_WRITE_DQS : + RW_MGR_MEM_DQ_PER_READ_DQS; + u32 stop; + int i, d; + + for (d = 0; d <= dqs_max - start_dqs; d++) { + if (write) { /* WRITE-ONLY */ + scc_mgr_apply_group_dqs_io_and_oct_out1(write_group, + d + start_dqs); + } else { /* READ-ONLY */ + scc_mgr_set_dqs_bus_in_delay(read_group, d + start_dqs); + if (IO_SHIFT_DQS_EN_WHEN_SHIFT_DQS) { + uint32_t delay = d + start_dqs_en; + if (delay > IO_DQS_EN_DELAY_MAX) + delay = IO_DQS_EN_DELAY_MAX; + scc_mgr_set_dqs_en_delay(read_group, delay); + } + scc_mgr_load_dqs(read_group); + } + + writel(0, &sdr_scc_mgr->update); + + /* + * Stop searching when the read test doesn't pass AND when + * we've seen a passing read on every bit. + */ + if (write) { /* WRITE-ONLY */ + stop = !rw_mgr_mem_calibrate_write_test(rank_bgn, + write_group, + 0, PASS_ONE_BIT, + bit_chk, 0); + + } else if (use_read_test) { /* READ-ONLY */ + stop = !rw_mgr_mem_calibrate_read_test(rank_bgn, + read_group, NUM_READ_PB_TESTS, PASS_ONE_BIT, + bit_chk, 0, 0); + } else { /* READ-ONLY */ + rw_mgr_mem_calibrate_write_test(rank_bgn, + write_group, + 0, PASS_ONE_BIT, + bit_chk, 0); + *bit_chk = *bit_chk >> (per_dqs * + (read_group - (write_group * + RW_MGR_MEM_IF_READ_DQS_WIDTH / + RW_MGR_MEM_IF_WRITE_DQS_WIDTH))); + stop = (*bit_chk == 0); + } + *sticky_bit_chk = *sticky_bit_chk | *bit_chk; + stop = stop && (*sticky_bit_chk == correct_mask); + + debug_cond(DLEVEL == 2, + "%s:%d center(right): dtap=%u => %u == %u && %u", __func__, __LINE__, d, + *sticky_bit_chk, correct_mask, stop); + + if (stop == 1) { + if (write && (d == 0)) { /* WRITE-ONLY */ + for (i = 0; i < RW_MGR_MEM_DQ_PER_WRITE_DQS; i++) { + /* + * d = 0 failed, but it passed when + * testing the left edge, so it must be + * marginal, set it to -1 + */ + if (right_edge[i] == delay_max + 1 && + left_edge[i] != delay_max + 1) + right_edge[i] = -1; + } + } + break; + } + + /* stop != 1 */ + for (i = 0; i < per_dqs; i++) { + if (*bit_chk & 1) { + /* + * Remember a passing test as + * the right_edge. + */ + right_edge[i] = d; + } else { + if (d != 0) { + /* + * If a right edge has not + * been seen yet, then a future + * passing test will mark this + * edge as the left edge. + */ + if (right_edge[i] == delay_max + 1) + left_edge[i] = -(d + 1); + } else { + /* + * d = 0 failed, but it passed + * when testing the left edge, + * so it must be marginal, set + * it to -1 + */ + if (right_edge[i] == delay_max + 1 && + left_edge[i] != delay_max + 1) + right_edge[i] = -1; + /* + * If a right edge has not been + * seen yet, then a future + * passing test will mark this + * edge as the left edge. + */ + else if (right_edge[i] == delay_max + 1) + left_edge[i] = -(d + 1); + } + } + + debug_cond(DLEVEL == 2, "%s:%d center[r,d=%u]: ", + __func__, __LINE__, d); + debug_cond(DLEVEL == 2, + "bit_chk_test=%i left_edge[%u]: %d ", + *bit_chk & 1, i, left_edge[i]); + debug_cond(DLEVEL == 2, "right_edge[%u]: %d\n", i, + right_edge[i]); + *bit_chk = *bit_chk >> 1; + } + } + + /* Check that all bits have a window */ + for (i = 0; i < per_dqs; i++) { + debug_cond(DLEVEL == 2, + "%s:%d write_center: left_edge[%u]: %d right_edge[%u]: %d", + __func__, __LINE__, i, left_edge[i], + i, right_edge[i]); + if ((left_edge[i] == dqs_max + 1) || + (right_edge[i] == dqs_max + 1)) + return i + 1; /* FIXME: If we fail, retval > 0 */ + } + + return 0; +} + /* per-bit deskew DQ and center */ static uint32_t rw_mgr_mem_calibrate_vfifo_center(uint32_t rank_bgn, uint32_t write_group, uint32_t read_group, uint32_t test_bgn, @@ -1803,6 +1963,7 @@ static uint32_t rw_mgr_mem_calibrate_vfifo_center(uint32_t rank_bgn, uint32_t stop; uint32_t temp_dq_in_delay1, temp_dq_in_delay2; uint32_t addr; + int ret; debug("%s:%d: %u %u", __func__, __LINE__, read_group, test_bgn); @@ -1909,132 +2070,38 @@ static uint32_t rw_mgr_mem_calibrate_vfifo_center(uint32_t rank_bgn, } /* Search for the right edge of the window for each bit */ - for (d = 0; d <= IO_DQS_IN_DELAY_MAX - start_dqs; d++) { - scc_mgr_set_dqs_bus_in_delay(read_group, d + start_dqs); - if (IO_SHIFT_DQS_EN_WHEN_SHIFT_DQS) { - uint32_t delay = d + start_dqs_en; - if (delay > IO_DQS_EN_DELAY_MAX) - delay = IO_DQS_EN_DELAY_MAX; - scc_mgr_set_dqs_en_delay(read_group, delay); - } - scc_mgr_load_dqs(read_group); - - writel(0, &sdr_scc_mgr->update); - + ret = search_right_edge(0, rank_bgn, write_group, read_group, + start_dqs, start_dqs_en, + &bit_chk, &sticky_bit_chk, + left_edge, right_edge, use_read_test); + if (ret) { /* - * Stop searching when the read test doesn't pass AND when - * we've seen a passing read on every bit. + * Restore delay chain settings before letting the loop + * in rw_mgr_mem_calibrate_vfifo to retry different + * dqs/ck relationships. */ - if (use_read_test) { - stop = !rw_mgr_mem_calibrate_read_test(rank_bgn, - read_group, NUM_READ_PB_TESTS, PASS_ONE_BIT, - &bit_chk, 0, 0); - } else { - rw_mgr_mem_calibrate_write_test(rank_bgn, write_group, - 0, PASS_ONE_BIT, - &bit_chk, 0); - bit_chk = bit_chk >> (RW_MGR_MEM_DQ_PER_READ_DQS * - (read_group - (write_group * - RW_MGR_MEM_IF_READ_DQS_WIDTH / - RW_MGR_MEM_IF_WRITE_DQS_WIDTH))); - stop = (bit_chk == 0); - } - sticky_bit_chk = sticky_bit_chk | bit_chk; - stop = stop && (sticky_bit_chk == param->read_correct_mask); + scc_mgr_set_dqs_bus_in_delay(read_group, start_dqs); + if (IO_SHIFT_DQS_EN_WHEN_SHIFT_DQS) + scc_mgr_set_dqs_en_delay(read_group, start_dqs_en); - debug_cond(DLEVEL == 2, "%s:%d vfifo_center(right): dtap=%u => %u == \ - %u && %u", __func__, __LINE__, d, - sticky_bit_chk, param->read_correct_mask, stop); + scc_mgr_load_dqs(read_group); + writel(0, &sdr_scc_mgr->update); - if (stop == 1) { - break; + debug_cond(DLEVEL == 1, + "%s:%d vfifo_center: failed to find edge [%u]: %d %d", + __func__, __LINE__, i, left_edge[i], right_edge[i]); + if (use_read_test) { + set_failing_group_stage(read_group * + RW_MGR_MEM_DQ_PER_READ_DQS + i, + CAL_STAGE_VFIFO, + CAL_SUBSTAGE_VFIFO_CENTER); } else { - for (i = 0; i < RW_MGR_MEM_DQ_PER_READ_DQS; i++) { - if (bit_chk & 1) { - /* Remember a passing test as - the right_edge */ - right_edge[i] = d; - } else { - if (d != 0) { - /* If a right edge has not been - seen yet, then a future passing - test will mark this edge as the - left edge */ - if (right_edge[i] == - IO_IO_IN_DELAY_MAX + 1) { - left_edge[i] = -(d + 1); - } - } else { - /* d = 0 failed, but it passed - when testing the left edge, - so it must be marginal, - set it to -1 */ - if (right_edge[i] == - IO_IO_IN_DELAY_MAX + 1 && - left_edge[i] != - IO_IO_IN_DELAY_MAX - + 1) { - right_edge[i] = -1; - } - /* If a right edge has not been - seen yet, then a future passing - test will mark this edge as the - left edge */ - else if (right_edge[i] == - IO_IO_IN_DELAY_MAX + - 1) { - left_edge[i] = -(d + 1); - } - } - } - - debug_cond(DLEVEL == 2, "%s:%d vfifo_center[r,\ - d=%u]: ", __func__, __LINE__, d); - debug_cond(DLEVEL == 2, "bit_chk_test=%d left_edge[%u]: %d ", - (int)(bit_chk & 1), i, left_edge[i]); - debug_cond(DLEVEL == 2, "right_edge[%u]: %d\n", i, - right_edge[i]); - bit_chk = bit_chk >> 1; - } - } - } - - /* Check that all bits have a window */ - for (i = 0; i < RW_MGR_MEM_DQ_PER_READ_DQS; i++) { - debug_cond(DLEVEL == 2, "%s:%d vfifo_center: left_edge[%u]: \ - %d right_edge[%u]: %d", __func__, __LINE__, - i, left_edge[i], i, right_edge[i]); - if ((left_edge[i] == IO_IO_IN_DELAY_MAX + 1) || (right_edge[i] - == IO_IO_IN_DELAY_MAX + 1)) { - /* - * Restore delay chain settings before letting the loop - * in rw_mgr_mem_calibrate_vfifo to retry different - * dqs/ck relationships. - */ - scc_mgr_set_dqs_bus_in_delay(read_group, start_dqs); - if (IO_SHIFT_DQS_EN_WHEN_SHIFT_DQS) { - scc_mgr_set_dqs_en_delay(read_group, - start_dqs_en); - } - scc_mgr_load_dqs(read_group); - writel(0, &sdr_scc_mgr->update); - - debug_cond(DLEVEL == 1, "%s:%d vfifo_center: failed to \ - find edge [%u]: %d %d", __func__, __LINE__, - i, left_edge[i], right_edge[i]); - if (use_read_test) { - set_failing_group_stage(read_group * - RW_MGR_MEM_DQ_PER_READ_DQS + i, - CAL_STAGE_VFIFO, - CAL_SUBSTAGE_VFIFO_CENTER); - } else { - set_failing_group_stage(read_group * - RW_MGR_MEM_DQ_PER_READ_DQS + i, - CAL_STAGE_VFIFO_AFTER_WRITES, - CAL_SUBSTAGE_VFIFO_CENTER); - } - return 0; + set_failing_group_stage(read_group * + RW_MGR_MEM_DQ_PER_READ_DQS + i, + CAL_STAGE_VFIFO_AFTER_WRITES, + CAL_SUBSTAGE_VFIFO_CENTER); } + return 0; } /* Find middle of window for each DQ bit */ @@ -2729,6 +2796,8 @@ static uint32_t rw_mgr_mem_calibrate_writes_center(uint32_t rank_bgn, uint32_t temp_dq_out1_delay; uint32_t addr; + int ret; + debug("%s:%d %u %u", __func__, __LINE__, write_group, test_bgn); dm_margin = 0; @@ -2833,107 +2902,14 @@ static uint32_t rw_mgr_mem_calibrate_writes_center(uint32_t rank_bgn, } /* Search for the right edge of the window for each bit */ - for (d = 0; d <= IO_IO_OUT1_DELAY_MAX - start_dqs; d++) { - scc_mgr_apply_group_dqs_io_and_oct_out1(write_group, - d + start_dqs); - - writel(0, &sdr_scc_mgr->update); - - /* - * Stop searching when the read test doesn't pass AND when - * we've seen a passing read on every bit. - */ - stop = !rw_mgr_mem_calibrate_write_test(rank_bgn, write_group, - 0, PASS_ONE_BIT, &bit_chk, 0); - - sticky_bit_chk = sticky_bit_chk | bit_chk; - stop = stop && (sticky_bit_chk == param->write_correct_mask); - - debug_cond(DLEVEL == 2, "write_center (right): dtap=%u => %u == \ - %u && %u\n", d, sticky_bit_chk, - param->write_correct_mask, stop); - - if (stop == 1) { - if (d == 0) { - for (i = 0; i < RW_MGR_MEM_DQ_PER_WRITE_DQS; - i++) { - /* d = 0 failed, but it passed when - testing the left edge, so it must be - marginal, set it to -1 */ - if (right_edge[i] == - IO_IO_OUT1_DELAY_MAX + 1 && - left_edge[i] != - IO_IO_OUT1_DELAY_MAX + 1) { - right_edge[i] = -1; - } - } - } - break; - } else { - for (i = 0; i < RW_MGR_MEM_DQ_PER_WRITE_DQS; i++) { - if (bit_chk & 1) { - /* - * Remember a passing test as - * the right_edge. - */ - right_edge[i] = d; - } else { - if (d != 0) { - /* - * If a right edge has not - * been seen yet, then a future - * passing test will mark this - * edge as the left edge. - */ - if (right_edge[i] == - IO_IO_OUT1_DELAY_MAX + 1) - left_edge[i] = -(d + 1); - } else { - /* - * d = 0 failed, but it passed - * when testing the left edge, - * so it must be marginal, set - * it to -1. - */ - if (right_edge[i] == - IO_IO_OUT1_DELAY_MAX + 1 && - left_edge[i] != - IO_IO_OUT1_DELAY_MAX + 1) - right_edge[i] = -1; - /* - * If a right edge has not been - * seen yet, then a future - * passing test will mark this - * edge as the left edge. - */ - else if (right_edge[i] == - IO_IO_OUT1_DELAY_MAX + - 1) - left_edge[i] = -(d + 1); - } - } - debug_cond(DLEVEL == 2, "write_center[r,d=%d):", d); - debug_cond(DLEVEL == 2, "bit_chk_test=%d left_edge[%u]: %d", - (int)(bit_chk & 1), i, left_edge[i]); - debug_cond(DLEVEL == 2, "right_edge[%u]: %d\n", i, - right_edge[i]); - bit_chk = bit_chk >> 1; - } - } - } - - /* Check that all bits have a window */ - for (i = 0; i < RW_MGR_MEM_DQ_PER_WRITE_DQS; i++) { - debug_cond(DLEVEL == 2, "%s:%d write_center: left_edge[%u]: \ - %d right_edge[%u]: %d", __func__, __LINE__, - i, left_edge[i], i, right_edge[i]); - if ((left_edge[i] == IO_IO_OUT1_DELAY_MAX + 1) || - (right_edge[i] == IO_IO_OUT1_DELAY_MAX + 1)) { - set_failing_group_stage(test_bgn + i, - CAL_STAGE_WRITES, - CAL_SUBSTAGE_WRITES_CENTER); - return 0; - } + ret = search_right_edge(1, rank_bgn, write_group, 0, + start_dqs, 0, + &bit_chk, &sticky_bit_chk, + left_edge, right_edge, 0); + if (ret) { + set_failing_group_stage(test_bgn + ret - 1, CAL_STAGE_WRITES, + CAL_SUBSTAGE_WRITES_CENTER); + return 0; } /* Find middle of window for each DQ bit */