From: Wenyou Yang <wenyou.yang@atmel.com>
Date: Tue, 2 Feb 2016 04:46:13 +0000 (+0800)
Subject: ARM: at91: clean up the PMC_PLLICPR init code
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=c43a72e88eb89d7f47d92e5a406efd5c67ab8434;p=u-boot.git

ARM: at91: clean up the PMC_PLLICPR init code

Due to introducing the PMC_PLLICPR init function, use this
function to clean up the code.

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Tested-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com>
---

diff --git a/arch/arm/mach-at91/spl_at91.c b/arch/arm/mach-at91/spl_at91.c
index b19f95b0d0..cc3341acb5 100644
--- a/arch/arm/mach-at91/spl_at91.c
+++ b/arch/arm/mach-at91/spl_at91.c
@@ -14,7 +14,6 @@
 #include <asm/arch/at91_common.h>
 #include <asm/arch/at91sam9_matrix.h>
 #include <asm/arch/at91_pit.h>
-#include <asm/arch/at91_pmc.h>
 #include <asm/arch/at91_rstc.h>
 #include <asm/arch/at91_wdt.h>
 #include <asm/arch/clk.h>
@@ -77,8 +76,6 @@ void __weak spl_board_init(void)
 
 void board_init_f(ulong dummy)
 {
-	struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
-
 	lowlevel_clock_init();
 	at91_disable_wdt();
 
@@ -86,7 +83,7 @@ void board_init_f(ulong dummy)
 	 * At this stage the main oscillator is supposed to be enabled
 	 * PCK = MCK = MOSC
 	 */
-	writel(0x00, &pmc->pllicpr);
+	at91_pllicpr_init(0x00);
 
 	/* Configure PLLA = MOSC * (PLL_MULA + 1) / PLL_DIVA */
 	at91_plla_init(CONFIG_SYS_AT91_PLLA);