From: Marek Vasut <marex@denx.de>
Date: Sun, 20 Dec 2015 03:00:46 +0000 (+0100)
Subject: arm: socfpga: Add support for Denali NAND controller
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=c339ea5bfe7129ac0e832df253df855c1e73cc84;p=u-boot.git

arm: socfpga: Add support for Denali NAND controller

Add common configuration bits for the Denali NAND controller and also
support for using it as a boot device in SPL.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Chin Liang See <clsee@altera.com>
---

diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h
index 2d1765d742..a09e906a6b 100644
--- a/include/configs/socfpga_common.h
+++ b/include/configs/socfpga_common.h
@@ -160,6 +160,19 @@
 #define CONFIG_SYS_MMC_MAX_BLK_COUNT	256	/* FIXME -- SPL only? */
 #endif
 
+/*
+ * NAND Support
+ */
+#ifdef CONFIG_NAND_DENALI
+#define CONFIG_SYS_MAX_NAND_DEVICE	1
+#define CONFIG_SYS_NAND_MAX_CHIPS	1
+#define CONFIG_SYS_NAND_ONFI_DETECTION
+#define CONFIG_NAND_DENALI_ECC_SIZE	512
+#define CONFIG_SYS_NAND_REGS_BASE	SOCFPGA_NANDREGS_ADDRESS
+#define CONFIG_SYS_NAND_DATA_BASE	SOCFPGA_NANDDATA_ADDRESS
+#define CONFIG_SYS_NAND_BASE		(CONFIG_SYS_NAND_DATA_BASE + 0x10)
+#endif
+
 /*
  * I2C support
  */
@@ -338,6 +351,9 @@ unsigned int cm_get_qspi_controller_clk_hz(void);
 #ifdef CONFIG_DM_SPI
 #define CONFIG_SPL_SPI_SUPPORT
 #endif
+#ifdef CONFIG_SPL_NAND_DENALI
+#define CONFIG_SPL_NAND_SUPPORT
+#endif
 
 /* SPL SDMMC boot support */
 #ifdef CONFIG_SPL_MMC_SUPPORT
@@ -360,6 +376,13 @@ unsigned int cm_get_qspi_controller_clk_hz(void);
 #define CONFIG_SYS_SPI_U_BOOT_OFFS	0x40000
 #endif
 
+/* SPL NAND boot support */
+#ifdef CONFIG_SPL_NAND_SUPPORT
+#define CONFIG_SYS_NAND_USE_FLASH_BBT
+#define CONFIG_SYS_NAND_BAD_BLOCK_POS	0
+#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x40000
+#endif
+
 /*
  * Stack setup
  */