From: Andre Przywara Date: Thu, 7 Dec 2023 16:07:05 +0000 (+0000) Subject: sunxi: sun50i_h6: make more clock functions SPL only X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=c209a7163a37196486d44c0529544953ac4e4db2;p=u-boot.git sunxi: sun50i_h6: make more clock functions SPL only In clock_sun50i_h6.c, responsible for (mostly early) clock setup on newer generation Allwinner SoCs, many functions are only needed by the SPL, and are thus already guarded by CONFIG_SPL_BUILD. Over the years drivers like for the UART or I2C were converted to DM, so they care about clock setup themselves now, by using a proper DM clock driver. This means those devices need the clock setup functions here for the SPL only. Include those functions into the existing CONFIG_SPL_BUILD guards, so they are compiled for the SPL only. By moving the clock_get_pll6() function to the end of the file, all SPL-only clocks can be contained within one #ifdef guard. This avoids unnecessary code in U-Boot proper and helps further refactoring. Add some comments on the way to help understanding of the file. Signed-off-by: Andre Przywara --- diff --git a/arch/arm/mach-sunxi/clock_sun50i_h6.c b/arch/arm/mach-sunxi/clock_sun50i_h6.c index dac3663e1b..cc2ee33641 100644 --- a/arch/arm/mach-sunxi/clock_sun50i_h6.c +++ b/arch/arm/mach-sunxi/clock_sun50i_h6.c @@ -51,7 +51,6 @@ void clock_init_safe(void) */ writel(MBUS_CLK_SRC_PLL6X2 | MBUS_CLK_M(3), &ccm->mbus_cfg); } -#endif void clock_init_uart(void) { @@ -73,7 +72,6 @@ void clock_init_uart(void) 1 << (RESET_SHIFT + CONFIG_CONS_INDEX - 1)); } -#ifdef CONFIG_SPL_BUILD void clock_set_pll1(unsigned int clk) { struct sunxi_ccm_reg * const ccm = @@ -105,33 +103,6 @@ void clock_set_pll1(unsigned int clk) val |= CCM_CPU_AXI_MUX_PLL_CPUX; writel(val, &ccm->cpu_axi_cfg); } -#endif - -unsigned int clock_get_pll6(void) -{ - struct sunxi_ccm_reg *const ccm = - (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; - uint32_t rval = readl(&ccm->pll6_cfg); - int n = ((rval & CCM_PLL6_CTRL_N_MASK) >> CCM_PLL6_CTRL_N_SHIFT) + 1; - int div2 = ((rval & CCM_PLL6_CTRL_DIV2_MASK) >> - CCM_PLL6_CTRL_DIV2_SHIFT) + 1; - int div1, m; - - if (IS_ENABLED(CONFIG_SUNXI_GEN_NCAT2)) { - div1 = ((rval & CCM_PLL6_CTRL_P0_MASK) >> - CCM_PLL6_CTRL_P0_SHIFT) + 1; - m = 1; - } else { - div1 = ((rval & CCM_PLL6_CTRL_DIV1_MASK) >> - CCM_PLL6_CTRL_DIV1_SHIFT) + 1; - if (IS_ENABLED(CONFIG_MACH_SUN50I_H6)) - m = 4; - else - m = 2; - } - - return 24000000U * n / m / div1 / div2; -} int clock_twi_onoff(int port, int state) { @@ -160,3 +131,31 @@ int clock_twi_onoff(int port, int state) return 0; } +#endif /* CONFIG_SPL_BUILD */ + +/* PLL_PERIPH0 clock, used by the MMC driver */ +unsigned int clock_get_pll6(void) +{ + struct sunxi_ccm_reg *const ccm = + (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; + uint32_t rval = readl(&ccm->pll6_cfg); + int n = ((rval & CCM_PLL6_CTRL_N_MASK) >> CCM_PLL6_CTRL_N_SHIFT) + 1; + int div2 = ((rval & CCM_PLL6_CTRL_DIV2_MASK) >> + CCM_PLL6_CTRL_DIV2_SHIFT) + 1; + int div1, m; + + if (IS_ENABLED(CONFIG_SUNXI_GEN_NCAT2)) { + div1 = ((rval & CCM_PLL6_CTRL_P0_MASK) >> + CCM_PLL6_CTRL_P0_SHIFT) + 1; + m = 1; + } else { + div1 = ((rval & CCM_PLL6_CTRL_DIV1_MASK) >> + CCM_PLL6_CTRL_DIV1_SHIFT) + 1; + if (IS_ENABLED(CONFIG_MACH_SUN50I_H6)) + m = 4; + else + m = 2; + } + + return 24000000U * n / m / div1 / div2; +}