From: Lokesh Vutla Date: Fri, 5 May 2017 07:29:07 +0000 (+0530) Subject: configs: convert CONFIG_SYS_MPUCLK to Kconfig X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=c187dd685adcbfd24b119e3a50a96132bdad1639;p=u-boot.git configs: convert CONFIG_SYS_MPUCLK to Kconfig Signed-off-by: Lokesh Vutla Reviewed-by: Tom Rini --- diff --git a/README b/README index 685a8222b0..2ca0102b57 100644 --- a/README +++ b/README @@ -4512,11 +4512,6 @@ Low Level (hardware related) configuration options: If defined, the x86 reset vector code is included. This is not needed when U-Boot is running from Coreboot. -- CONFIG_SYS_MPUCLK - Defines the MPU clock speed (in MHz). - - NOTE : currently only supported on AM335x platforms. - - CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC: Enables the RTC32K OSC on AM33xx based plattforms diff --git a/arch/arm/include/asm/arch-am33xx/clocks_am33xx.h b/arch/arm/include/asm/arch-am33xx/clocks_am33xx.h index 4c9352a2ed..c06b01b842 100644 --- a/arch/arm/include/asm/arch-am33xx/clocks_am33xx.h +++ b/arch/arm/include/asm/arch-am33xx/clocks_am33xx.h @@ -19,11 +19,6 @@ #define MPUPLL_M_550 550 #define MPUPLL_M_300 300 -/* MAIN PLL Fdll = 550 MHz, by default */ -#ifndef CONFIG_SYS_MPUCLK -#define CONFIG_SYS_MPUCLK MPUPLL_M_550 -#endif - #define UART_RESET (0x1 << 1) #define UART_CLK_RUNNING_MASK 0x1 #define UART_SMART_IDLE_EN (0x1 << 0x3) diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 5bca20e315..d3f380256b 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -148,6 +148,11 @@ config TARGET_CM_T43 endchoice +config SYS_MPUCLK + int "MPU CLK speed" + default 550 + help + Defines the MPU clock speed (in MHz). config TI_SECURE_DEVICE bool "HS Device Type Support" diff --git a/configs/draco_defconfig b/configs/draco_defconfig index ea678b6f48..2ecdd3c8f6 100644 --- a/configs/draco_defconfig +++ b/configs/draco_defconfig @@ -5,6 +5,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_TARGET_DRACO=y +CONFIG_SYS_MPUCLK=300 CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y diff --git a/configs/etamin_defconfig b/configs/etamin_defconfig index 39d3ad1cd9..7e0b1923b8 100644 --- a/configs/etamin_defconfig +++ b/configs/etamin_defconfig @@ -5,6 +5,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_TARGET_ETAMIN=y +CONFIG_SYS_MPUCLK=300 CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y diff --git a/configs/pxm2_defconfig b/configs/pxm2_defconfig index 5b7c5ef3e9..c40684a81d 100644 --- a/configs/pxm2_defconfig +++ b/configs/pxm2_defconfig @@ -5,6 +5,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_TARGET_PXM2=y +CONFIG_SYS_MPUCLK=720 CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y diff --git a/configs/rastaban_defconfig b/configs/rastaban_defconfig index 084c03cd00..01848c5702 100644 --- a/configs/rastaban_defconfig +++ b/configs/rastaban_defconfig @@ -5,6 +5,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_TARGET_RASTABAN=y +CONFIG_SYS_MPUCLK=300 CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y diff --git a/configs/rut_defconfig b/configs/rut_defconfig index 33289962a8..f09a67e62c 100644 --- a/configs/rut_defconfig +++ b/configs/rut_defconfig @@ -5,6 +5,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_TARGET_RUT=y +CONFIG_SYS_MPUCLK=600 CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y diff --git a/configs/thuban_defconfig b/configs/thuban_defconfig index a20c4dfb31..dd61ead647 100644 --- a/configs/thuban_defconfig +++ b/configs/thuban_defconfig @@ -5,6 +5,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_TARGET_THUBAN=y +CONFIG_SYS_MPUCLK=300 CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y diff --git a/include/configs/draco.h b/include/configs/draco.h index da77c451b0..896d14f99a 100644 --- a/include/configs/draco.h +++ b/include/configs/draco.h @@ -18,7 +18,6 @@ #include "siemens-am33x-common.h" -#define CONFIG_SYS_MPUCLK 300 #define DDR_PLL_FREQ 303 #undef CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC diff --git a/include/configs/etamin.h b/include/configs/etamin.h index 3383f06bf7..40c57948cc 100644 --- a/include/configs/etamin.h +++ b/include/configs/etamin.h @@ -69,7 +69,6 @@ CONFIG_SYS_NAND_BASE2} #define CONFIG_SYS_NAND_ONFI_DETECTION -#define CONFIG_SYS_MPUCLK 300 #define DDR_PLL_FREQ 303 #undef CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC diff --git a/include/configs/pxm2.h b/include/configs/pxm2.h index c8bc8f3512..57f034f0df 100644 --- a/include/configs/pxm2.h +++ b/include/configs/pxm2.h @@ -19,7 +19,6 @@ #include "siemens-am33x-common.h" -#define CONFIG_SYS_MPUCLK 720 #define DDR_IOCTRL_VAL 0x18b #define DDR_PLL_FREQ 266 diff --git a/include/configs/rastaban.h b/include/configs/rastaban.h index 16ed1f0133..99fe1616e5 100644 --- a/include/configs/rastaban.h +++ b/include/configs/rastaban.h @@ -15,7 +15,6 @@ #include "siemens-am33x-common.h" -#define CONFIG_SYS_MPUCLK 300 #define DDR_PLL_FREQ 303 #undef CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC diff --git a/include/configs/rut.h b/include/configs/rut.h index bd819f1aad..8cfb73d781 100644 --- a/include/configs/rut.h +++ b/include/configs/rut.h @@ -19,7 +19,6 @@ #include "siemens-am33x-common.h" -#define CONFIG_SYS_MPUCLK 600 #define RUT_IOCTRL_VAL 0x18b #define DDR_PLL_FREQ 303 diff --git a/include/configs/thuban.h b/include/configs/thuban.h index 9b73828df6..8c37d7cace 100644 --- a/include/configs/thuban.h +++ b/include/configs/thuban.h @@ -15,7 +15,6 @@ #include "siemens-am33x-common.h" -#define CONFIG_SYS_MPUCLK 300 #define DDR_PLL_FREQ 303 #undef CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt index cd0165f934..3eba402f7d 100644 --- a/scripts/config_whitelist.txt +++ b/scripts/config_whitelist.txt @@ -4869,7 +4869,6 @@ CONFIG_SYS_MPTPR_1BK_8K CONFIG_SYS_MPTPR_2BK_2K CONFIG_SYS_MPTPR_2BK_4K CONFIG_SYS_MPTPR_2BK_8K -CONFIG_SYS_MPUCLK CONFIG_SYS_MRAM_BASE CONFIG_SYS_MRAM_SIZE CONFIG_SYS_MRS_OFFS