From: Peng Fan Date: Thu, 8 Aug 2019 09:55:37 +0000 (+0000) Subject: arm: dts: sync dts for i.MX6ULL X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=c15838128847a03e1aac6b61dd9c7d7ffb0ed30e;p=u-boot.git arm: dts: sync dts for i.MX6ULL Sync kernel dts for i.MX6ULL from commit <0a8ad0ffa4d8> ("Merge tag 'for-linus-5.3-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux") Signed-off-by: Peng Fan Reviewed-by: Ye Li Reviewed-by: Fabio Estevam --- diff --git a/arch/arm/dts/imx6ull-14x14-evk.dts b/arch/arm/dts/imx6ull-14x14-evk.dts index 9ebcfe1f4e..74aaa8a56a 100644 --- a/arch/arm/dts/imx6ull-14x14-evk.dts +++ b/arch/arm/dts/imx6ull-14x14-evk.dts @@ -1,527 +1,18 @@ -/* - * Copyright (C) 2016 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// +// Copyright (C) 2016 Freescale Semiconductor, Inc. /dts-v1/; #include "imx6ull.dtsi" +#include "imx6ul-14x14-evk.dtsi" / { - model = "Freescale i.MX6 ULL 14x14 EVK Board"; + model = "Freescale i.MX6 UltraLiteLite 14x14 EVK Board"; compatible = "fsl,imx6ull-14x14-evk", "fsl,imx6ull"; - - chosen { - stdout-path = &uart1; - }; - - memory { - reg = <0x80000000 0x20000000>; - }; - - backlight { - compatible = "pwm-backlight"; - pwms = <&pwm1 0 5000000>; - brightness-levels = <0 4 8 16 32 64 128 255>; - default-brightness-level = <6>; - status = "okay"; - }; - - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - reg_can_3v3: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "can-3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpios = <&gpio_spi 3 GPIO_ACTIVE_LOW>; - }; - - reg_sd1_vmmc: regulator@1 { - compatible = "regulator-fixed"; - regulator-name = "VSD_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - reg_gpio_dvfs: regulator-gpio { - compatible = "regulator-gpio"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_dvfs>; - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1400000>; - regulator-name = "gpio_dvfs"; - regulator-type = "voltage"; - gpios = <&gpio5 3 GPIO_ACTIVE_HIGH>; - states = <1300000 0x1 1400000 0x0>; - }; - }; - - spi5 { - compatible = "spi-gpio"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_spi4>; - status = "okay"; - gpio-sck = <&gpio5 11 0>; - gpio-mosi = <&gpio5 10 0>; - cs-gpios = <&gpio5 7 0>; - num-chipselects = <1>; - #address-cells = <1>; - #size-cells = <0>; - - gpio_spi: gpio_spi@0 { - compatible = "fairchild,74hc595"; - gpio-controller; - oe-gpios = <&gpio5 8 0>; - #gpio-cells = <2>; - reg = <0>; - registers-number = <1>; - registers-default = /bits/ 8 <0x57>; - spi-max-frequency = <100000>; - }; - }; -}; - -&cpu0 { - arm-supply = <®_arm>; - soc-supply = <®_soc>; - dc-supply = <®_gpio_dvfs>; }; &clks { - assigned-clocks = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>; - assigned-clock-rates = <786432000>; -}; - -&fec1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet1>; - phy-mode = "rmii"; - phy-handle = <ðphy0>; - status = "okay"; -}; - -&fec2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet2>; - phy-mode = "rmii"; - phy-handle = <ðphy1>; - status = "okay"; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - ethphy0: ethernet-phy@2 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <2>; - }; - - ethphy1: ethernet-phy@1 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <1>; - }; - }; -}; - -&gpc { - fsl,cpu_pupscr_sw2iso = <0x1>; - fsl,cpu_pupscr_sw = <0x0>; - fsl,cpu_pdnscr_iso2sw = <0x1>; - fsl,cpu_pdnscr_iso = <0x1>; - fsl,ldo-bypass = <0>; /* DCDC, ldo-enable */ -}; - -&i2c1 { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c1>; - status = "okay"; - - mag3110@0e { - compatible = "fsl,mag3110"; - reg = <0x0e>; - position = <2>; - }; - - fxls8471@1e { - compatible = "fsl,fxls8471"; - reg = <0x1e>; - position = <0>; - interrupt-parent = <&gpio5>; - interrupts = <0 8>; - }; -}; - -&i2c2 { - clock_frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c2>; - status = "okay"; -}; - -&iomuxc { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hog_1>; - imx6ul-evk { - pinctrl_hog_1: hoggrp-1 { - fsl,pins = < - MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x17059 /* SD1 CD */ - MX6UL_PAD_GPIO1_IO05__USDHC1_VSELECT 0x17059 /* SD1 VSELECT */ - MX6UL_PAD_GPIO1_IO09__GPIO1_IO09 0x17059 /* SD1 RESET */ - >; - }; - - pinctrl_csi1: csi1grp { - fsl,pins = < - MX6UL_PAD_CSI_MCLK__CSI_MCLK 0x1b088 - MX6UL_PAD_CSI_PIXCLK__CSI_PIXCLK 0x1b088 - MX6UL_PAD_CSI_VSYNC__CSI_VSYNC 0x1b088 - MX6UL_PAD_CSI_HSYNC__CSI_HSYNC 0x1b088 - MX6UL_PAD_CSI_DATA00__CSI_DATA02 0x1b088 - MX6UL_PAD_CSI_DATA01__CSI_DATA03 0x1b088 - MX6UL_PAD_CSI_DATA02__CSI_DATA04 0x1b088 - MX6UL_PAD_CSI_DATA03__CSI_DATA05 0x1b088 - MX6UL_PAD_CSI_DATA04__CSI_DATA06 0x1b088 - MX6UL_PAD_CSI_DATA05__CSI_DATA07 0x1b088 - MX6UL_PAD_CSI_DATA06__CSI_DATA08 0x1b088 - MX6UL_PAD_CSI_DATA07__CSI_DATA09 0x1b088 - >; - }; - - pinctrl_enet1: enet1grp { - fsl,pins = < - MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0 - MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x1b0b0 - MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0 - MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0 - MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0 - MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0 - MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0 - MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b031 - >; - }; - - pinctrl_enet2: enet2grp { - fsl,pins = < - MX6UL_PAD_GPIO1_IO07__ENET2_MDC 0x1b0b0 - MX6UL_PAD_GPIO1_IO06__ENET2_MDIO 0x1b0b0 - MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x1b0b0 - MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER 0x1b0b0 - MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0 - MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0 - MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x1b0b0 - MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b0b0 - MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b0b0 - MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x4001b031 - >; - }; - - pinctrl_flexcan1: flexcan1grp{ - fsl,pins = < - MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x1b020 - MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x1b020 - >; - }; - - pinctrl_flexcan2: flexcan2grp{ - fsl,pins = < - MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX 0x1b020 - MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX 0x1b020 - >; - }; - - pinctrl_i2c1: i2c1grp { - fsl,pins = < - MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0 - MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0 - >; - }; - - pinctrl_i2c2: i2c2grp { - fsl,pins = < - MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0 - MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0 - >; - }; - - pinctrl_lcdif_dat: lcdifdatgrp { - fsl,pins = < - MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x79 - MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x79 - MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x79 - MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x79 - MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x79 - MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x79 - MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x79 - MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x79 - MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x79 - MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x79 - MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x79 - MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x79 - MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x79 - MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x79 - MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x79 - MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x79 - MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x79 - MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x79 - MX6UL_PAD_LCD_DATA18__LCDIF_DATA18 0x79 - MX6UL_PAD_LCD_DATA19__LCDIF_DATA19 0x79 - MX6UL_PAD_LCD_DATA20__LCDIF_DATA20 0x79 - MX6UL_PAD_LCD_DATA21__LCDIF_DATA21 0x79 - MX6UL_PAD_LCD_DATA22__LCDIF_DATA22 0x79 - MX6UL_PAD_LCD_DATA23__LCDIF_DATA23 0x79 - >; - }; - - pinctrl_lcdif_ctrl: lcdifctrlgrp { - fsl,pins = < - MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x79 - MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x79 - MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x79 - MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x79 - >; - }; - - pinctrl_pwm1: pwm1grp { - fsl,pins = < - MX6UL_PAD_GPIO1_IO08__PWM1_OUT 0x110b0 - >; - }; - - pinctrl_qspi: qspigrp { - fsl,pins = < - MX6UL_PAD_NAND_WP_B__QSPI_A_SCLK 0x70a1 - MX6UL_PAD_NAND_READY_B__QSPI_A_DATA00 0x70a1 - MX6UL_PAD_NAND_CE0_B__QSPI_A_DATA01 0x70a1 - MX6UL_PAD_NAND_CE1_B__QSPI_A_DATA02 0x70a1 - MX6UL_PAD_NAND_CLE__QSPI_A_DATA03 0x70a1 - MX6UL_PAD_NAND_DQS__QSPI_A_SS0_B 0x70a1 - >; - }; - - pinctrl_uart1: uart1grp { - fsl,pins = < - MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1 - MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1 - >; - }; - - pinctrl_uart2: uart2grp { - fsl,pins = < - MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX 0x1b0b1 - MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX 0x1b0b1 - MX6UL_PAD_UART3_RX_DATA__UART2_DCE_RTS 0x1b0b1 - MX6UL_PAD_UART3_TX_DATA__UART2_DCE_CTS 0x1b0b1 - >; - }; - - pinctrl_uart2dte: uart2dtegrp { - fsl,pins = < - MX6UL_PAD_UART2_TX_DATA__UART2_DTE_RX 0x1b0b1 - MX6UL_PAD_UART2_RX_DATA__UART2_DTE_TX 0x1b0b1 - MX6UL_PAD_UART3_RX_DATA__UART2_DTE_CTS 0x1b0b1 - MX6UL_PAD_UART3_TX_DATA__UART2_DTE_RTS 0x1b0b1 - >; - }; - - pinctrl_usdhc1: usdhc1grp { - fsl,pins = < - MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059 - MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10071 - MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059 - MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059 - MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059 - MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059 - >; - }; - - pinctrl_usdhc2: usdhc2grp { - fsl,pins = < - MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x10069 - MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x17059 - MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059 - MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059 - MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059 - MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059 - >; - }; - - pinctrl_wdog: wdoggrp { - fsl,pins = < - MX6UL_PAD_LCD_RESET__WDOG1_WDOG_ANY 0x30b0 - >; - }; - }; -}; - -&iomuxc_snvs { - pinctrl-names = "default_snvs"; - pinctrl-0 = <&pinctrl_hog_2>; - imx6ul-evk { - pinctrl_hog_2: hoggrp-2 { - fsl,pins = < - MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x80000000 - >; - }; - - pinctrl_dvfs: dvfsgrp { - fsl,pins = < - MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x79 - >; - }; - - pinctrl_lcdif_reset: lcdifresetgrp { - fsl,pins = < - /* used for lcd reset */ - MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x79 - >; - }; - - pinctrl_spi4: spi4grp { - fsl,pins = < - MX6ULL_PAD_BOOT_MODE0__GPIO5_IO10 0x70a1 - MX6ULL_PAD_BOOT_MODE1__GPIO5_IO11 0x70a1 - MX6ULL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x70a1 - MX6ULL_PAD_SNVS_TAMPER8__GPIO5_IO08 0x80000000 - >; - }; - - pinctrl_sai2_hp_det_b: sai2_hp_det_grp { - fsl,pins = < - MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x17059 - >; - }; - }; -}; - - -&lcdif { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_lcdif_dat - &pinctrl_lcdif_ctrl - &pinctrl_lcdif_reset>; - display = <&display0>; - status = "okay"; - - display0: display { - bits-per-pixel = <16>; - bus-width = <24>; - - display-timings { - native-mode = <&timing0>; - timing0: timing0 { - clock-frequency = <9200000>; - hactive = <480>; - vactive = <272>; - hfront-porch = <8>; - hback-porch = <4>; - hsync-len = <41>; - vback-porch = <2>; - vfront-porch = <4>; - vsync-len = <10>; - - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - }; - }; -}; - -&pwm1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pwm1>; - status = "okay"; -}; - -&qspi { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_qspi>; - status = "okay"; - ddrsmp=<0>; - - flash0: n25q256a@0 { - #address-cells = <1>; - #size-cells = <1>; - /* compatible = "micron,n25q256a"; */ - compatible = "jedec,spi-nor"; - spi-max-frequency = <29000000>; - spi-nor,ddr-quad-read-dummy = <6>; - reg = <0>; - }; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1>; - status = "okay"; -}; - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2>; - fsl,uart-has-rtscts; - /* for DTE mode, add below change */ - /* fsl,dte-mode; */ - /* pinctrl-0 = <&pinctrl_uart2dte>; */ - status = "okay"; -}; - -&usbotg1 { - dr_mode = "otg"; - srp-disable; - hnp-disable; - adp-disable; - status = "okay"; -}; - -&usbotg2 { - dr_mode = "host"; - disable-over-current; - status = "okay"; -}; - -&usbphy1 { - tx-d-cal = <0x5>; -}; - -&usbphy2 { - tx-d-cal = <0x5>; -}; - -&usdhc1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc1>; - cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>; - keep-power-in-suspend; - enable-sdio-wakeup; - vmmc-supply = <®_sd1_vmmc>; - status = "okay"; -}; - -&usdhc2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc2>; - no-1-8-v; - non-removable; - keep-power-in-suspend; - enable-sdio-wakeup; - status = "okay"; -}; - -&wdog1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_wdog>; - fsl,wdog_b; + assigned-clocks = <&clks IMX6UL_CLK_PLL3_PFD2>; + assigned-clock-rates = <320000000>; }; diff --git a/arch/arm/dts/imx6ull-pinfunc-snvs.h b/arch/arm/dts/imx6ull-pinfunc-snvs.h index da3f412e42..54cfe72295 100644 --- a/arch/arm/dts/imx6ull-pinfunc-snvs.h +++ b/arch/arm/dts/imx6ull-pinfunc-snvs.h @@ -1,9 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* * Copyright (C) 2016 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. + * Copyright (C) 2017 NXP */ #ifndef __DTS_IMX6ULL_PINFUNC_SNVS_H @@ -26,4 +24,3 @@ #define MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x002C 0x0070 0x0000 0x5 0x0 #endif /* __DTS_IMX6ULL_PINFUNC_SNVS_H */ - diff --git a/arch/arm/dts/imx6ull-pinfunc.h b/arch/arm/dts/imx6ull-pinfunc.h index 7770ed39f6..eb025a9d47 100644 --- a/arch/arm/dts/imx6ull-pinfunc.h +++ b/arch/arm/dts/imx6ull-pinfunc.h @@ -1,9 +1,6 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright (C) 2016 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __DTS_IMX6ULL_PINFUNC_H @@ -14,46 +11,77 @@ * The pin function ID is a tuple of * */ -#define MX6UL_PAD_GPIO1_IO03__OSC32K_32K_OUT 0x0068 0x02f4 0x0000 0x3 0x0 +/* signals common for i.MX6UL and i.MX6ULL */ +#undef MX6UL_PAD_UART5_TX_DATA__UART5_DTE_RX +#define MX6UL_PAD_UART5_TX_DATA__UART5_DTE_RX 0x00BC 0x0348 0x0644 0x0 0x6 +#undef MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX +#define MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX 0x00C0 0x034C 0x0644 0x0 0x7 +#undef MX6UL_PAD_ENET1_RX_EN__UART5_DCE_RTS +#define MX6UL_PAD_ENET1_RX_EN__UART5_DCE_RTS 0x00CC 0x0358 0x0640 0x1 0x5 +#undef MX6UL_PAD_ENET1_TX_DATA0__UART5_DTE_RTS +#define MX6UL_PAD_ENET1_TX_DATA0__UART5_DTE_RTS 0x00D0 0x035C 0x0640 0x1 0x6 +#undef MX6UL_PAD_CSI_DATA02__UART5_DCE_RTS +#define MX6UL_PAD_CSI_DATA02__UART5_DCE_RTS 0x01EC 0x0478 0x0640 0x8 0x7 -#define MX6UL_PAD_ENET2_RX_DATA0__EPDC_SDDO08 0x00E4 0x0370 0x0000 0x9 0x0 -#define MX6UL_PAD_ENET2_RX_DATA1__EPDC_SDDO09 0x00E8 0x0374 0x0000 0x9 0x0 -#define MX6UL_PAD_ENET2_RX_EN__EPDC_SDDO10 0x00EC 0x0378 0x0000 0x9 0x0 -#define MX6UL_PAD_ENET2_TX_DATA0__EPDC_SDDO11 0x00F0 0x037C 0x0000 0x9 0x0 -#define MX6UL_PAD_ENET2_TX_DATA1__EPDC_SDDO12 0x00F4 0x0380 0x0000 0x9 0x0 -#define MX6UL_PAD_ENET2_TX_EN__EPDC_SDDO13 0x00F8 0x0384 0x0000 0x9 0x0 -#define MX6UL_PAD_ENET2_TX_CLK__EPDC_SDDO14 0x00FC 0x0388 0x0000 0x9 0x0 -#define MX6UL_PAD_ENET2_RX_ER__EPDC_SDDO15 0x0100 0x038C 0x0000 0x9 0x0 -#define MX6UL_PAD_LCD_CLK__EPDC_SDCLK 0x0104 0x0390 0x0000 0x9 0x0 -#define MX6UL_PAD_LCD_ENABLE__EPDC_SDLE 0x0108 0x0394 0x0000 0x9 0x0 -#define MX6UL_PAD_LCD_HSYNC__EPDC_SDOE 0x010C 0x0398 0x0000 0x9 0x0 -#define MX6UL_PAD_LCD_VSYNC__EPDC_SDCE0 0x0110 0x039C 0x0000 0x9 0x0 -#define MX6UL_PAD_LCD_RESET__EPDC_GDOE 0x0114 0x03A0 0x0000 0x9 0x0 -#define MX6UL_PAD_LCD_DATA00__EPDC_SDDO00 0x0118 0x03A4 0x0000 0x9 0x0 -#define MX6UL_PAD_LCD_DATA01__EPDC_SDDO01 0x011C 0x03A8 0x0000 0x9 0x0 -#define MX6UL_PAD_LCD_DATA02__EPDC_SDDO02 0x0120 0x03AC 0x0000 0x9 0x0 -#define MX6UL_PAD_LCD_DATA03__EPDC_SDDO03 0x0124 0x03B0 0x0000 0x9 0x0 -#define MX6UL_PAD_LCD_DATA04__EPDC_SDDO04 0x0128 0x03B4 0x0000 0x9 0x0 -#define MX6UL_PAD_LCD_DATA05__EPDC_SDDO05 0x012C 0x03B8 0x0000 0x9 0x0 -#define MX6UL_PAD_LCD_DATA06__EPDC_SDDO06 0x0130 0x03BC 0x0000 0x9 0x0 -#define MX6UL_PAD_LCD_DATA07__EPDC_SDDO07 0x0134 0x03C0 0x0000 0x9 0x0 -#define MX6UL_PAD_LCD_DATA14__EPDC_SDSHR 0x0150 0x03DC 0x0000 0x9 0x0 -#define MX6UL_PAD_LCD_DATA15__EPDC_GDRL 0x0154 0x03E0 0x0000 0x9 0x0 -#define MX6UL_PAD_LCD_DATA16__EPDC_GDCLK 0x0158 0x03E4 0x0000 0x9 0x0 -#define MX6UL_PAD_LCD_DATA17__EPDC_GDSP 0x015C 0x03E8 0x0000 0x9 0x0 -#define MX6UL_PAD_LCD_DATA21__EPDC_SDCE1 0x016C 0x03F8 0x0000 0x9 0x0 - -#define MX6UL_PAD_CSI_MCLK__ESAI_TX3_RX2 0x01D4 0x0460 0x0000 0x9 0x0 -#define MX6UL_PAD_CSI_PIXCLK__ESAI_TX2_RX3 0x01D8 0x0464 0x0000 0x9 0x0 -#define MX6UL_PAD_CSI_VSYNC__ESAI_TX4_RX1 0x01DC 0x0468 0x0000 0x9 0x0 -#define MX6UL_PAD_CSI_HSYNC__ESAI_TX1 0x01E0 0x046C 0x0000 0x9 0x0 -#define MX6UL_PAD_CSI_DATA00__ESAI_TX_HF_CLK 0x01E4 0x0470 0x0000 0x9 0x0 -#define MX6UL_PAD_CSI_DATA01__ESAI_RX_HF_CLK 0x01E8 0x0474 0x0000 0x9 0x0 -#define MX6UL_PAD_CSI_DATA02__ESAI_RX_FS 0x01EC 0x0478 0x0000 0x9 0x0 -#define MX6UL_PAD_CSI_DATA03__ESAI_RX_CLK 0x01F0 0x047C 0x0000 0x9 0x0 -#define MX6UL_PAD_CSI_DATA04__ESAI_TX_FS 0x01F4 0x0480 0x0000 0x9 0x0 -#define MX6UL_PAD_CSI_DATA05__ESAI_TX_CLK 0x01F8 0x0484 0x0000 0x9 0x0 -#define MX6UL_PAD_CSI_DATA06__ESAI_TX5_RX0 0x01FC 0x0488 0x0000 0x9 0x0 -#define MX6UL_PAD_CSI_DATA07__ESAI_T0 0x0200 0x048C 0x0000 0x9 0x0 +/* signals for i.MX6ULL only */ +#define MX6ULL_PAD_UART1_TX_DATA__UART5_DCE_TX 0x0084 0x0310 0x0000 0x9 0x0 +#define MX6ULL_PAD_UART1_TX_DATA__UART5_DTE_RX 0x0084 0x0310 0x0644 0x9 0x4 +#define MX6ULL_PAD_UART1_RX_DATA__UART5_DCE_RX 0x0088 0x0314 0x0644 0x9 0x5 +#define MX6ULL_PAD_UART1_RX_DATA__UART5_DTE_TX 0x0088 0x0314 0x0000 0x9 0x0 +#define MX6ULL_PAD_UART1_CTS_B__UART5_DCE_CTS 0x008C 0x0318 0x0000 0x9 0x0 +#define MX6ULL_PAD_UART1_CTS_B__UART5_DTE_RTS 0x008C 0x0318 0x0640 0x9 0x3 +#define MX6ULL_PAD_UART1_RTS_B__UART5_DCE_RTS 0x0090 0x031C 0x0640 0x9 0x4 +#define MX6ULL_PAD_UART1_RTS_B__UART5_DTE_CTS 0x0090 0x031C 0x0000 0x9 0x0 +#define MX6ULL_PAD_UART4_RX_DATA__EPDC_PWRCTRL01 0x00B8 0x0344 0x0000 0x9 0x0 +#define MX6ULL_PAD_UART5_TX_DATA__EPDC_PWRCTRL02 0x00BC 0x0348 0x0000 0x9 0x0 +#define MX6ULL_PAD_UART5_RX_DATA__EPDC_PWRCTRL03 0x00C0 0x034C 0x0000 0x9 0x0 +#define MX6ULL_PAD_ENET1_RX_DATA0__EPDC_SDCE04 0x00C4 0x0350 0x0000 0x9 0x0 +#define MX6ULL_PAD_ENET1_RX_DATA1__EPDC_SDCE05 0x00C8 0x0354 0x0000 0x9 0x0 +#define MX6ULL_PAD_ENET1_RX_EN__EPDC_SDCE06 0x00CC 0x0358 0x0000 0x9 0x0 +#define MX6ULL_PAD_ENET1_TX_DATA0__EPDC_SDCE07 0x00D0 0x035C 0x0000 0x9 0x0 +#define MX6ULL_PAD_ENET1_TX_DATA1__EPDC_SDCE08 0x00D4 0x0360 0x0000 0x9 0x0 +#define MX6ULL_PAD_ENET1_TX_EN__EPDC_SDCE09 0x00D8 0x0364 0x0000 0x9 0x0 +#define MX6ULL_PAD_ENET1_TX_CLK__EPDC_SDOED 0x00DC 0x0368 0x0000 0x9 0x0 +#define MX6ULL_PAD_ENET1_RX_ER__EPDC_SDOEZ 0x00E0 0x036C 0x0000 0x9 0x0 +#define MX6ULL_PAD_ENET2_RX_DATA0__EPDC_SDDO08 0x00E4 0x0370 0x0000 0x9 0x0 +#define MX6ULL_PAD_ENET2_RX_DATA1__EPDC_SDDO09 0x00E8 0x0374 0x0000 0x9 0x0 +#define MX6ULL_PAD_ENET2_RX_EN__EPDC_SDDO10 0x00EC 0x0378 0x0000 0x9 0x0 +#define MX6ULL_PAD_ENET2_TX_DATA0__EPDC_SDDO11 0x00F0 0x037C 0x0000 0x9 0x0 +#define MX6ULL_PAD_ENET2_TX_DATA1__EPDC_SDDO12 0x00F4 0x0380 0x0000 0x9 0x0 +#define MX6ULL_PAD_ENET2_TX_EN__EPDC_SDDO13 0x00F8 0x0384 0x0000 0x9 0x0 +#define MX6ULL_PAD_ENET2_TX_CLK__EPDC_SDDO14 0x00FC 0x0388 0x0000 0x9 0x0 +#define MX6ULL_PAD_ENET2_RX_ER__EPDC_SDDO15 0x0100 0x038C 0x0000 0x9 0x0 +#define MX6ULL_PAD_LCD_CLK__EPDC_SDCLK 0x0104 0x0390 0x0000 0x9 0x0 +#define MX6ULL_PAD_LCD_ENABLE__EPDC_SDLE 0x0108 0x0394 0x0000 0x9 0x0 +#define MX6ULL_PAD_LCD_HSYNC__EPDC_SDOE 0x010C 0x0398 0x0000 0x9 0x0 +#define MX6ULL_PAD_LCD_VSYNC__EPDC_SDCE0 0x0110 0x039C 0x0000 0x9 0x0 +#define MX6ULL_PAD_LCD_RESET__EPDC_GDOE 0x0114 0x03A0 0x0000 0x9 0x0 +#define MX6ULL_PAD_LCD_DATA00__EPDC_SDDO00 0x0118 0x03A4 0x0000 0x9 0x0 +#define MX6ULL_PAD_LCD_DATA01__EPDC_SDDO01 0x011C 0x03A8 0x0000 0x9 0x0 +#define MX6ULL_PAD_LCD_DATA02__EPDC_SDDO02 0x0120 0x03AC 0x0000 0x9 0x0 +#define MX6ULL_PAD_LCD_DATA03__EPDC_SDDO03 0x0124 0x03B0 0x0000 0x9 0x0 +#define MX6ULL_PAD_LCD_DATA04__EPDC_SDDO04 0x0128 0x03B4 0x0000 0x9 0x0 +#define MX6ULL_PAD_LCD_DATA05__EPDC_SDDO05 0x012C 0x03B8 0x0000 0x9 0x0 +#define MX6ULL_PAD_LCD_DATA06__EPDC_SDDO06 0x0130 0x03BC 0x0000 0x9 0x0 +#define MX6ULL_PAD_LCD_DATA07__EPDC_SDDO07 0x0134 0x03C0 0x0000 0x9 0x0 +#define MX6ULL_PAD_LCD_DATA14__EPDC_SDSHR 0x0150 0x03DC 0x0000 0x9 0x0 +#define MX6ULL_PAD_LCD_DATA15__EPDC_GDRL 0x0154 0x03E0 0x0000 0x9 0x0 +#define MX6ULL_PAD_LCD_DATA16__EPDC_GDCLK 0x0158 0x03E4 0x0000 0x9 0x0 +#define MX6ULL_PAD_LCD_DATA17__EPDC_GDSP 0x015C 0x03E8 0x0000 0x9 0x0 +#define MX6ULL_PAD_LCD_DATA21__EPDC_SDCE1 0x016C 0x03F8 0x0000 0x9 0x0 +#define MX6ULL_PAD_LCD_DATA22__EPDC_SDCE02 0x0170 0x03FC 0x0000 0x9 0x0 +#define MX6ULL_PAD_LCD_DATA23__EPDC_SDCE03 0x0174 0x0400 0x0000 0x9 0x0 +#define MX6ULL_PAD_CSI_MCLK__ESAI_TX3_RX2 0x01D4 0x0460 0x0000 0x9 0x0 +#define MX6ULL_PAD_CSI_PIXCLK__ESAI_TX2_RX3 0x01D8 0x0464 0x0000 0x9 0x0 +#define MX6ULL_PAD_CSI_VSYNC__ESAI_TX4_RX1 0x01DC 0x0468 0x0000 0x9 0x0 +#define MX6ULL_PAD_CSI_HSYNC__ESAI_TX1 0x01E0 0x046C 0x0000 0x9 0x0 +#define MX6ULL_PAD_CSI_DATA00__ESAI_TX_HF_CLK 0x01E4 0x0470 0x0000 0x9 0x0 +#define MX6ULL_PAD_CSI_DATA01__ESAI_RX_HF_CLK 0x01E8 0x0474 0x0000 0x9 0x0 +#define MX6ULL_PAD_CSI_DATA02__ESAI_RX_FS 0x01EC 0x0478 0x0000 0x9 0x0 +#define MX6ULL_PAD_CSI_DATA03__ESAI_RX_CLK 0x01F0 0x047C 0x0000 0x9 0x0 +#define MX6ULL_PAD_CSI_DATA04__ESAI_TX_FS 0x01F4 0x0480 0x0000 0x9 0x0 +#define MX6ULL_PAD_CSI_DATA05__ESAI_TX_CLK 0x01F8 0x0484 0x0000 0x9 0x0 +#define MX6ULL_PAD_CSI_DATA06__ESAI_TX5_RX0 0x01FC 0x0488 0x0000 0x9 0x0 +#define MX6ULL_PAD_CSI_DATA07__ESAI_T0 0x0200 0x048C 0x0000 0x9 0x0 #endif /* __DTS_IMX6ULL_PINFUNC_H */ diff --git a/arch/arm/dts/imx6ull.dtsi b/arch/arm/dts/imx6ull.dtsi index 4598f2f411..22e4a307fa 100644 --- a/arch/arm/dts/imx6ull.dtsi +++ b/arch/arm/dts/imx6ull.dtsi @@ -1,1173 +1,81 @@ -/* - * Copyright 2015-2016 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// +// Copyright 2016 Freescale Semiconductor, Inc. -#include -#include -#include -#include +#include "imx6ul.dtsi" #include "imx6ull-pinfunc.h" #include "imx6ull-pinfunc-snvs.h" -#include "skeleton.dtsi" -/ { - aliases { - can0 = &flexcan1; - can1 = &flexcan2; - ethernet0 = &fec1; - ethernet1 = &fec2; - gpio0 = &gpio1; - gpio1 = &gpio2; - gpio2 = &gpio3; - gpio3 = &gpio4; - gpio4 = &gpio5; - i2c0 = &i2c1; - i2c1 = &i2c2; - i2c2 = &i2c3; - i2c3 = &i2c4; - mmc0 = &usdhc1; - mmc1 = &usdhc2; - serial0 = &uart1; - serial1 = &uart2; - serial2 = &uart3; - serial3 = &uart4; - serial4 = &uart5; - serial5 = &uart6; - serial6 = &uart7; - serial7 = &uart8; - spi0 = &qspi; - spi1 = &ecspi1; - spi2 = &ecspi2; - spi3 = &ecspi3; - spi4 = &ecspi4; - usbphy0 = &usbphy1; - usbphy1 = &usbphy2; - usb0 = &usbotg1; - usb1 = &usbotg2; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu0: cpu@0 { - compatible = "arm,cortex-a7"; - device_type = "cpu"; - reg = <0>; - clock-latency = <61036>; /* two CLK32 periods */ - operating-points = < - /* kHz uV */ - 528000 1175000 - 99000 950000 - >; - fsl,soc-operating-points = < - /* KHz uV */ - 528000 1175000 - 99000 1175000 - >; - clocks = <&clks IMX6UL_CLK_ARM>, - <&clks IMX6UL_CLK_PLL2_BUS>, - <&clks IMX6UL_CLK_PLL2_PFD2>, - <&clks IMX6UL_CA7_SECONDARY_SEL>, - <&clks IMX6UL_CLK_STEP>, - <&clks IMX6UL_CLK_PLL1_SW>, - <&clks IMX6UL_CLK_PLL1_SYS>, - <&clks IMX6UL_PLL1_BYPASS>, - <&clks IMX6UL_CLK_PLL1>, - <&clks IMX6UL_PLL1_BYPASS_SRC>, - <&clks IMX6UL_CLK_OSC>; - clock-names = "arm", "pll2_bus", "pll2_pfd2_396m", "secondary_sel", "step", - "pll1_sw", "pll1_sys", "pll1_bypass", "pll1", "pll1_bypass_src", "osc"; - }; - }; - - intc: interrupt-controller@00a01000 { - compatible = "arm,cortex-a7-gic"; - #interrupt-cells = <3>; - interrupt-controller; - reg = <0x00a01000 0x1000>, - <0x00a02000 0x100>; - }; - - clocks { - #address-cells = <1>; - #size-cells = <0>; - - ckil: clock@0 { - compatible = "fixed-clock"; - reg = <0>; - #clock-cells = <0>; - clock-frequency = <32768>; - clock-output-names = "ckil"; - }; +/* Delete UART8 in AIPS-1 (i.MX6UL specific) */ +/delete-node/ &uart8; +/* Delete CAAM node in AIPS-2 (i.MX6UL specific) */ +/delete-node/ &crypto; + +&cpu0 { + operating-points = < + /* kHz uV */ + 900000 1275000 + 792000 1225000 + 528000 1175000 + 396000 1025000 + 198000 950000 + >; + fsl,soc-operating-points = < + /* KHz uV */ + 900000 1250000 + 792000 1175000 + 528000 1175000 + 396000 1175000 + 198000 1175000 + >; +}; - osc: clock@1 { - compatible = "fixed-clock"; - reg = <1>; - #clock-cells = <0>; - clock-frequency = <24000000>; - clock-output-names = "osc"; - }; +&ocotp { + compatible = "fsl,imx6ull-ocotp", "syscon"; +}; - ipp_di0: clock@2 { - compatible = "fixed-clock"; - reg = <2>; - #clock-cells = <0>; - clock-frequency = <0>; - clock-output-names = "ipp_di0"; - }; +&usdhc1 { + compatible = "fsl,imx6ull-usdhc", "fsl,imx6sx-usdhc"; +}; - ipp_di1: clock@3 { - compatible = "fixed-clock"; - reg = <3>; - #clock-cells = <0>; - clock-frequency = <0>; - clock-output-names = "ipp_di1"; - }; - }; +&usdhc2 { + compatible = "fsl,imx6ull-usdhc", "fsl,imx6sx-usdhc"; +}; +/ { soc { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - interrupt-parent = <&gpc>; - ranges; - - busfreq { - compatible = "fsl,imx_busfreq"; - clocks = <&clks IMX6UL_CLK_PLL2_PFD2>, <&clks IMX6UL_CLK_PLL2_198M>, - <&clks IMX6UL_CLK_PLL2_BUS>, <&clks IMX6UL_CLK_ARM>, - <&clks IMX6UL_CLK_PLL3_USB_OTG>, <&clks IMX6UL_CLK_PERIPH>, - <&clks IMX6UL_CLK_PERIPH_PRE>, <&clks IMX6UL_CLK_PERIPH_CLK2>, - <&clks IMX6UL_CLK_PERIPH_CLK2_SEL>, <&clks IMX6UL_CLK_OSC>, - <&clks IMX6UL_CLK_AHB>, <&clks IMX6UL_CLK_AXI>, - <&clks IMX6UL_CLK_PERIPH2>, <&clks IMX6UL_CLK_PERIPH2_PRE>, - <&clks IMX6UL_CLK_PERIPH2_CLK2>, <&clks IMX6UL_CLK_PERIPH2_CLK2_SEL>, - <&clks IMX6UL_CLK_STEP>, <&clks IMX6UL_CLK_MMDC_P0_FAST>, <&clks IMX6UL_PLL1_BYPASS_SRC>, - <&clks IMX6UL_PLL1_BYPASS>, <&clks IMX6UL_CLK_PLL1_SYS>, <&clks IMX6UL_CLK_PLL1_SW>, - <&clks IMX6UL_CLK_PLL1>; - clock-names = "pll2_pfd2_396m", "pll2_198m", "pll2_bus", "arm", "pll3_usb_otg", - "periph", "periph_pre", "periph_clk2", "periph_clk2_sel", "osc", - "ahb", "ocram", "periph2", "periph2_pre", "periph2_clk2", "periph2_clk2_sel", - "step", "mmdc", "pll1_bypass_src", "pll1_bypass", "pll1_sys", "pll1_sw", "pll1"; - fsl,max_ddr_freq = <400000000>; - }; - - pmu { - compatible = "arm,cortex-a7-pmu"; - interrupts = ; - status = "disabled"; - }; - - ocrams: sram@00900000 { - compatible = "fsl,lpm-sram"; - reg = <0x00900000 0x4000>; - }; - - ocrams_ddr: sram@00904000 { - compatible = "fsl,ddr-lpm-sram"; - reg = <0x00904000 0x1000>; - }; - - ocram: sram@00905000 { - compatible = "mmio-sram"; - reg = <0x00905000 0x1B000>; - }; - - dma_apbh: dma-apbh@01804000 { - compatible = "fsl,imx6ul-dma-apbh", "fsl,imx28-dma-apbh"; - reg = <0x01804000 0x2000>; - interrupts = , - , - , - ; - interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3"; - #dma-cells = <1>; - dma-channels = <4>; - clocks = <&clks IMX6UL_CLK_APBHDMA>; - }; - - gpmi: gpmi-nand@01806000{ - compatible = "fsl,imx6q-gpmi-nand"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x01806000 0x2000>, <0x01808000 0x4000>; - reg-names = "gpmi-nand", "bch"; - interrupts = ; - interrupt-names = "bch"; - clocks = <&clks IMX6UL_CLK_GPMI_IO>, - <&clks IMX6UL_CLK_GPMI_APB>, - <&clks IMX6UL_CLK_GPMI_BCH>, - <&clks IMX6UL_CLK_GPMI_BCH_APB>, - <&clks IMX6UL_CLK_PER_BCH>; - clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch", - "gpmi_bch_apb", "per1_bch"; - dmas = <&dma_apbh 0>; - dma-names = "rx-tx"; - status = "disabled"; - }; - - aips1: aips-bus@02000000 { - compatible = "fsl,aips-bus", "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x02000000 0x100000>; - ranges; - - spba-bus@02000000 { - compatible = "fsl,spba-bus", "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x02000000 0x40000>; - ranges; - - spdif: spdif@02004000 { - compatible = "fsl,imx6ul-spdif", "fsl,imx35-spdif"; - reg = <0x02004000 0x4000>; - interrupts = ; - dmas = <&sdma 41 18 0>, - <&sdma 42 18 0>; - dma-names = "rx", "tx"; - clocks = <&clks IMX6UL_CLK_SPDIF_GCLK>, - <&clks IMX6UL_CLK_OSC>, - <&clks IMX6UL_CLK_SPDIF>, - <&clks IMX6UL_CLK_DUMMY>, <&clks IMX6UL_CLK_DUMMY>, <&clks IMX6UL_CLK_DUMMY>, - <&clks IMX6UL_CLK_IPG>, - <&clks IMX6UL_CLK_DUMMY>, <&clks IMX6UL_CLK_DUMMY>, - <&clks IMX6UL_CLK_SPBA>; - clock-names = "core", "rxtx0", - "rxtx1", "rxtx2", - "rxtx3", "rxtx4", - "rxtx5", "rxtx6", - "rxtx7", "dma"; - status = "disabled"; - }; - - ecspi1: ecspi@02008000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi"; - reg = <0x02008000 0x4000>; - interrupts = ; - clocks = <&clks IMX6UL_CLK_ECSPI1>, - <&clks IMX6UL_CLK_ECSPI1>; - clock-names = "ipg", "per"; - dmas = <&sdma 3 7 1>, <&sdma 4 7 2>; - dma-names = "rx", "tx"; - status = "disabled"; - }; - - ecspi2: ecspi@0200c000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi"; - reg = <0x0200c000 0x4000>; - interrupts = ; - clocks = <&clks IMX6UL_CLK_ECSPI2>, - <&clks IMX6UL_CLK_ECSPI2>; - clock-names = "ipg", "per"; - dmas = <&sdma 5 7 1>, <&sdma 6 7 2>; - dma-names = "rx", "tx"; - status = "disabled"; - }; - - ecspi3: ecspi@02010000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi"; - reg = <0x02010000 0x4000>; - interrupts = ; - clocks = <&clks IMX6UL_CLK_ECSPI3>, - <&clks IMX6UL_CLK_ECSPI3>; - clock-names = "ipg", "per"; - dmas = <&sdma 7 7 1>, <&sdma 8 7 2>; - dma-names = "rx", "tx"; - status = "disabled"; - }; - - ecspi4: ecspi@02014000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi"; - reg = <0x02014000 0x4000>; - interrupts = ; - clocks = <&clks IMX6UL_CLK_ECSPI4>, - <&clks IMX6UL_CLK_ECSPI4>; - clock-names = "ipg", "per"; - dmas = <&sdma 9 7 1>, <&sdma 10 7 2>; - dma-names = "rx", "tx"; - status = "disabled"; - }; - - uart7: serial@02018000 { - compatible = "fsl,imx6ul-uart", - "fsl,imx6q-uart", "fsl,imx21-uart"; - reg = <0x02018000 0x4000>; - interrupts = ; - clocks = <&clks IMX6UL_CLK_UART7_IPG>, - <&clks IMX6UL_CLK_UART7_SERIAL>; - clock-names = "ipg", "per"; - dmas = <&sdma 43 4 0>, <&sdma 44 4 0>; - dma-names = "rx", "tx"; - status = "disabled"; - }; - - uart1: serial@02020000 { - compatible = "fsl,imx6ul-uart", - "fsl,imx6q-uart", "fsl,imx21-uart"; - reg = <0x02020000 0x4000>; - interrupts = ; - clocks = <&clks IMX6UL_CLK_UART1_IPG>, - <&clks IMX6UL_CLK_UART1_SERIAL>; - clock-names = "ipg", "per"; - status = "disabled"; - }; - - esai: esai@02024000 { - compatible = "fsl,imx6ull-esai"; - reg = <0x02024000 0x4000>; - interrupts = ; - clocks = <&clks IMX6UL_CLK_ESAI_IPG>, - <&clks IMX6UL_CLK_ESAI_MEM>, - <&clks IMX6UL_CLK_ESAI_EXTAL>, - <&clks IMX6UL_CLK_ESAI_IPG>, - <&clks IMX6UL_CLK_SPBA>; - clock-names = "core", "mem", "extal", - "fsys", "dma"; - dmas = <&sdma 0 21 0>, <&sdma 47 21 0>; - dma-names = "rx", "tx"; - dma-source = <&gpr 0 14 0 15>; - status = "disabled"; - }; - - sai1: sai@02028000 { - compatible = "fsl,imx6ul-sai", - "fsl,imx6sx-sai"; - reg = <0x02028000 0x4000>; - interrupts = ; - clocks = <&clks IMX6UL_CLK_SAI1_IPG>, - <&clks IMX6UL_CLK_DUMMY>, - <&clks IMX6UL_CLK_SAI1>, - <&clks 0>, <&clks 0>; - clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; - dma-names = "rx", "tx"; - dmas = <&sdma 35 24 0>, <&sdma 36 24 0>; - status = "disabled"; - }; - - sai2: sai@0202c000 { - compatible = "fsl,imx6ul-sai", - "fsl,imx6sx-sai"; - reg = <0x0202c000 0x4000>; - interrupts = ; - clocks = <&clks IMX6UL_CLK_SAI2_IPG>, - <&clks IMX6UL_CLK_DUMMY>, - <&clks IMX6UL_CLK_SAI2>, - <&clks 0>, <&clks 0>; - clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; - dma-names = "rx", "tx"; - dmas = <&sdma 37 24 0>, <&sdma 38 24 0>; - status = "disabled"; - }; - - sai3: sai@02030000 { - compatible = "fsl,imx6ul-sai", - "fsl,imx6sx-sai"; - reg = <0x02030000 0x4000>; - interrupts = ; - clocks = <&clks IMX6UL_CLK_SAI3_IPG>, - <&clks IMX6UL_CLK_DUMMY>, - <&clks IMX6UL_CLK_SAI3>, - <&clks 0>, <&clks 0>; - clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; - dma-names = "rx", "tx"; - dmas = <&sdma 39 24 0>, <&sdma 40 24 0>; - status = "disabled"; - }; - - asrc: asrc@02034000 { - compatible = "fsl,imx53-asrc"; - reg = <0x02034000 0x4000>; - interrupts = ; - clocks = <&clks IMX6UL_CLK_ASRC_IPG>, - <&clks IMX6UL_CLK_ASRC_MEM>, <&clks 0>, - <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>, - <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>, - <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>, - <&clks IMX6UL_CLK_SPDIF>, <&clks 0>, <&clks 0>, - <&clks IMX6UL_CLK_SPBA>; - clock-names = "mem", "ipg", "asrck_0", - "asrck_1", "asrck_2", "asrck_3", "asrck_4", - "asrck_5", "asrck_6", "asrck_7", "asrck_8", - "asrck_9", "asrck_a", "asrck_b", "asrck_c", - "asrck_d", "asrck_e", "asrck_f", "dma"; - dmas = <&sdma 17 23 1>, <&sdma 18 23 1>, <&sdma 19 23 1>, - <&sdma 20 23 1>, <&sdma 21 23 1>, <&sdma 22 23 1>; - dma-names = "rxa", "rxb", "rxc", - "txa", "txb", "txc"; - fsl,asrc-rate = <48000>; - fsl,asrc-width = <16>; - status = "okay"; - }; - }; - - tsc: tsc@02040000 { - compatible = "fsl,imx6ul-tsc"; - reg = <0x02040000 0x4000>, <0x0219c000 0x4000>; - interrupts = , - ; - clocks = <&clks IMX6UL_CLK_IPG>, - <&clks IMX6UL_CLK_ADC2>; - clock-names = "tsc", "adc"; - status = "disabled"; - }; - - pwm1: pwm@02080000 { - compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm"; - reg = <0x02080000 0x4000>; - interrupts = ; - clocks = <&clks IMX6UL_CLK_PWM1>, - <&clks IMX6UL_CLK_PWM1>; - clock-names = "ipg", "per"; - #pwm-cells = <2>; - }; - - pwm2: pwm@02084000 { - compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm"; - reg = <0x02084000 0x4000>; - interrupts = ; - clocks = <&clks IMX6UL_CLK_DUMMY>, - <&clks IMX6UL_CLK_DUMMY>; - clock-names = "ipg", "per"; - #pwm-cells = <2>; - }; - - pwm3: pwm@02088000 { - compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm"; - reg = <0x02088000 0x4000>; - interrupts = ; - clocks = <&clks IMX6UL_CLK_PWM3>, - <&clks IMX6UL_CLK_PWM3>; - clock-names = "ipg", "per"; - #pwm-cells = <2>; - }; - - pwm4: pwm@0208c000 { - compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm"; - reg = <0x0208c000 0x4000>; - interrupts = ; - clocks = <&clks IMX6UL_CLK_DUMMY>, - <&clks IMX6UL_CLK_DUMMY>; - clock-names = "ipg", "per"; - #pwm-cells = <2>; - }; - - flexcan1: can@02090000 { - compatible = "fsl,imx6ul-flexcan", "fsl,imx6q-flexcan"; - reg = <0x02090000 0x4000>; - interrupts = ; - clocks = <&clks IMX6UL_CLK_CAN1_IPG>, - <&clks IMX6UL_CLK_CAN1_SERIAL>; - clock-names = "ipg", "per"; - stop-mode = <&gpr 0x10 1 0x10 17>; - status = "disabled"; - }; - - flexcan2: can@02094000 { - compatible = "fsl,imx6ul-flexcan", "fsl,imx6q-flexcan"; - reg = <0x02094000 0x4000>; - interrupts = ; - clocks = <&clks IMX6UL_CLK_CAN2_IPG>, - <&clks IMX6UL_CLK_CAN2_SERIAL>; - clock-names = "ipg", "per"; - stop-mode = <&gpr 0x10 2 0x10 18>; - status = "disabled"; - }; - - gpt1: gpt@02098000 { - compatible = "fsl,imx6ul-gpt", "fsl,imx31-gpt"; - reg = <0x02098000 0x4000>; - interrupts = ; - clocks = <&clks IMX6UL_CLK_GPT1_BUS>, - <&clks IMX6UL_CLK_GPT1_SERIAL>; - clock-names = "ipg", "per"; - }; - - gpio1: gpio@0209c000 { - compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio"; - reg = <0x0209c000 0x4000>; - interrupts = , - ; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio2: gpio@020a0000 { - compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio"; - reg = <0x020a0000 0x4000>; - interrupts = , - ; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio3: gpio@020a4000 { - compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio"; - reg = <0x020a4000 0x4000>; - interrupts = , - ; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio4: gpio@020a8000 { - compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio"; - reg = <0x020a8000 0x4000>; - interrupts = , - ; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio5: gpio@020ac000 { - compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio"; - reg = <0x020ac000 0x4000>; - interrupts = , - ; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - snvslp: snvs@020b0000 { - compatible = "fsl,imx6ul-snvs"; - reg = <0x020b0000 0x4000>; - interrupts = ; - }; - - fec2: ethernet@020b4000 { - compatible = "fsl,imx6ul-fec", "fsl,imx6q-fec"; - reg = <0x020b4000 0x4000>; - interrupts = , - ; - clocks = <&clks IMX6UL_CLK_ENET>, - <&clks IMX6UL_CLK_ENET_AHB>, - <&clks IMX6UL_CLK_ENET_PTP>, - <&clks IMX6UL_CLK_ENET2_REF_125M>, - <&clks IMX6UL_CLK_ENET2_REF_125M>; - clock-names = "ipg", "ahb", "ptp", - "enet_clk_ref", "enet_out"; - stop-mode = <&gpr 0x10 4>; - fsl,num-tx-queues=<1>; - fsl,num-rx-queues=<1>; - fsl,magic-packet; - fsl,wakeup_irq = <0>; - status = "disabled"; - }; - - kpp: kpp@020b8000 { - compatible = "fsl,imx6ul-kpp", "fsl,imx21-kpp"; - reg = <0x020b8000 0x4000>; - interrupts = ; - clocks = <&clks IMX6UL_CLK_DUMMY>; - status = "disabled"; - }; - - wdog1: wdog@020bc000 { - compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt"; - reg = <0x020bc000 0x4000>; - interrupts = ; - clocks = <&clks IMX6UL_CLK_WDOG1>; - }; - - wdog2: wdog@020c0000 { - compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt"; - reg = <0x020c0000 0x4000>; - interrupts = ; - clocks = <&clks IMX6UL_CLK_WDOG2>; - status = "disabled"; - }; - - clks: ccm@020c4000 { - compatible = "fsl,imx6ul-ccm"; - reg = <0x020c4000 0x4000>; - interrupts = , - ; - #clock-cells = <1>; - clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>; - clock-names = "ckil", "osc", "ipp_di0", "ipp_di1"; - }; - - anatop: anatop@020c8000 { - compatible = "fsl,imx6ul-anatop", "fsl,imx6q-anatop", - "syscon", "simple-bus"; - reg = <0x020c8000 0x1000>; - interrupts = , - , - ; - - reg_3p0: regulator-3p0@120 { - compatible = "fsl,anatop-regulator"; - regulator-name = "vdd3p0"; - regulator-min-microvolt = <2625000>; - regulator-max-microvolt = <3400000>; - anatop-reg-offset = <0x120>; - anatop-vol-bit-shift = <8>; - anatop-vol-bit-width = <5>; - anatop-min-bit-val = <0>; - anatop-min-voltage = <2625000>; - anatop-max-voltage = <3400000>; - anatop-enable-bit = <0>; - }; - - reg_arm: regulator-vddcore@140 { - compatible = "fsl,anatop-regulator"; - regulator-name = "cpu"; - regulator-min-microvolt = <725000>; - regulator-max-microvolt = <1450000>; - regulator-always-on; - anatop-reg-offset = <0x140>; - anatop-vol-bit-shift = <0>; - anatop-vol-bit-width = <5>; - anatop-delay-reg-offset = <0x170>; - anatop-delay-bit-shift = <24>; - anatop-delay-bit-width = <2>; - anatop-min-bit-val = <1>; - anatop-min-voltage = <725000>; - anatop-max-voltage = <1450000>; - }; - - reg_soc: regulator-vddsoc@140 { - compatible = "fsl,anatop-regulator"; - regulator-name = "vddsoc"; - regulator-min-microvolt = <725000>; - regulator-max-microvolt = <1450000>; - regulator-always-on; - anatop-reg-offset = <0x140>; - anatop-vol-bit-shift = <18>; - anatop-vol-bit-width = <5>; - anatop-delay-reg-offset = <0x170>; - anatop-delay-bit-shift = <28>; - anatop-delay-bit-width = <2>; - anatop-min-bit-val = <1>; - anatop-min-voltage = <725000>; - anatop-max-voltage = <1450000>; - }; - }; - - usbphy1: usbphy@020c9000 { - compatible = "fsl,imx6ul-usbphy", "fsl,imx23-usbphy"; - reg = <0x020c9000 0x1000>; - interrupts = ; - clocks = <&clks IMX6UL_CLK_USBPHY1>; - phy-3p0-supply = <®_3p0>; - fsl,anatop = <&anatop>; - }; - - usbphy2: usbphy@020ca000 { - compatible = "fsl,imx6ul-usbphy", "fsl,imx23-usbphy"; - reg = <0x020ca000 0x1000>; - interrupts = ; - clocks = <&clks IMX6UL_CLK_USBPHY2>; - phy-3p0-supply = <®_3p0>; - fsl,anatop = <&anatop>; - }; - - tempmon: tempmon { - compatible = "fsl,imx6ul-tempmon", "fsl,imx6sx-tempmon"; - interrupts = ; - fsl,tempmon = <&anatop>; - fsl,tempmon-data = <&ocotp>; - clocks = <&clks IMX6UL_CLK_PLL3_USB_OTG>; - }; - - snvs: snvs@020cc000 { - compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd"; - reg = <0x020cc000 0x4000>; - - snvs_rtc: snvs-rtc-lp { - compatible = "fsl,sec-v4.0-mon-rtc-lp"; - regmap = <&snvs>; - offset = <0x34>; - interrupts = , ; - }; - - snvs_poweroff: snvs-poweroff { - compatible = "syscon-poweroff"; - regmap = <&snvs>; - offset = <0x38>; - mask = <0x61>; - }; - - snvs_pwrkey: snvs-powerkey { - compatible = "fsl,sec-v4.0-pwrkey"; - regmap = <&snvs>; - interrupts = ; - linux,keycode = ; - wakeup; - }; - }; - - epit1: epit@020d0000 { - reg = <0x020d0000 0x4000>; - interrupts = ; - }; - - epit2: epit@020d4000 { - reg = <0x020d4000 0x4000>; - interrupts = ; - }; - - src: src@020d8000 { - compatible = "fsl,imx6ul-src", "fsl,imx51-src"; - reg = <0x020d8000 0x4000>; - interrupts = , - ; - #reset-cells = <1>; - }; - - gpc: gpc@020dc000 { - compatible = "fsl,imx6ul-gpc", "fsl,imx6q-gpc"; - reg = <0x020dc000 0x4000>; - interrupt-controller; - #interrupt-cells = <3>; - interrupts = ; - interrupt-parent = <&intc>; - fsl,mf-mix-wakeup-irq = <0xfc00000 0x7d00 0x0 0x1400640>; - }; - - iomuxc: iomuxc@020e0000 { - compatible = "fsl,imx6ul-iomuxc"; - reg = <0x020e0000 0x4000>; - }; - - gpr: iomuxc-gpr@020e4000 { - compatible = "fsl,imx6ul-iomuxc-gpr", "syscon"; - reg = <0x020e4000 0x4000>; - }; - - mqs: mqs { - compatible = "fsl,imx6sx-mqs"; - gpr = <&gpr>; - status = "disabled"; - }; - - gpt2: gpt@020e8000 { - compatible = "fsl,imx6ul-gpt", "fsl,imx31-gpt"; - reg = <0x020e8000 0x4000>; - interrupts = ; - clocks = <&clks IMX6UL_CLK_DUMMY>, - <&clks IMX6UL_CLK_DUMMY>; - clock-names = "ipg", "per"; - }; - - sdma: sdma@020ec000 { - compatible = "fsl,imx6ul-sdma", "fsl,imx35-sdma"; - reg = <0x020ec000 0x4000>; - interrupts = ; - clocks = <&clks IMX6UL_CLK_SDMA>, - <&clks IMX6UL_CLK_SDMA>; - clock-names = "ipg", "ahb"; - #dma-cells = <3>; - iram = <&ocram>; - fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin"; - }; - - pwm5: pwm@020f0000 { - compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm"; - reg = <0x020f0000 0x4000>; - interrupts = ; - clocks = <&clks IMX6UL_CLK_DUMMY>, - <&clks IMX6UL_CLK_DUMMY>; - clock-names = "ipg", "per"; - #pwm-cells = <2>; - }; - - pwm6: pwm@020f4000 { - compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm"; - reg = <0x020f4000 0x4000>; - interrupts = ; - clocks = <&clks IMX6UL_CLK_DUMMY>, - <&clks IMX6UL_CLK_DUMMY>; - clock-names = "ipg", "per"; - #pwm-cells = <2>; - }; - - pwm7: pwm@020f8000 { - compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm"; - reg = <0x020f8000 0x4000>; - interrupts = ; - clocks = <&clks IMX6UL_CLK_DUMMY>, - <&clks IMX6UL_CLK_DUMMY>; - clock-names = "ipg", "per"; - #pwm-cells = <2>; - }; - - pwm8: pwm@020fc000 { - compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm"; - reg = <0x020fc000 0x4000>; - interrupts = ; - clocks = <&clks IMX6UL_CLK_DUMMY>, - <&clks IMX6UL_CLK_DUMMY>; - clock-names = "ipg", "per"; - #pwm-cells = <2>; - }; - }; - - aips2: aips-bus@02100000 { - compatible = "fsl,aips-bus", "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x02100000 0x100000>; - ranges; - - usbotg1: usb@02184000 { - compatible = "fsl,imx6ul-usb", "fsl,imx27-usb"; - reg = <0x02184000 0x200>; - interrupts = ; - clocks = <&clks IMX6UL_CLK_USBOH3>; - fsl,usbphy = <&usbphy1>; - fsl,usbmisc = <&usbmisc 0>; - fsl,anatop = <&anatop>; - ahb-burst-config = <0x0>; - tx-burst-size-dword = <0x10>; - rx-burst-size-dword = <0x10>; - status = "disabled"; - }; - - usbotg2: usb@02184200 { - compatible = "fsl,imx6ul-usb", "fsl,imx27-usb"; - reg = <0x02184200 0x200>; - interrupts = ; - clocks = <&clks IMX6UL_CLK_USBOH3>; - fsl,usbphy = <&usbphy2>; - fsl,usbmisc = <&usbmisc 1>; - ahb-burst-config = <0x0>; - tx-burst-size-dword = <0x10>; - rx-burst-size-dword = <0x10>; - status = "disabled"; - }; - - usbmisc: usbmisc@02184800 { - #index-cells = <1>; - compatible = "fsl,imx6ul-usbmisc", "fsl,imx6q-usbmisc"; - reg = <0x02184800 0x200>; - }; - - fec1: ethernet@02188000 { - compatible = "fsl,imx6ul-fec", "fsl,imx6q-fec"; - reg = <0x02188000 0x4000>; - interrupts = , - ; - clocks = <&clks IMX6UL_CLK_ENET>, - <&clks IMX6UL_CLK_ENET_AHB>, - <&clks IMX6UL_CLK_ENET_PTP>, - <&clks IMX6UL_CLK_ENET_REF>, - <&clks IMX6UL_CLK_ENET_REF>; - clock-names = "ipg", "ahb", "ptp", - "enet_clk_ref", "enet_out"; - stop-mode = <&gpr 0x10 3>; - fsl,num-tx-queues=<1>; - fsl,num-rx-queues=<1>; - fsl,magic-packet; - fsl,wakeup_irq = <0>; - status = "disabled"; - }; - - usdhc1: usdhc@02190000 { - compatible = "fsl,imx6ul-usdhc", "fsl,imx6sx-usdhc"; - reg = <0x02190000 0x4000>; - interrupts = ; - clocks = <&clks IMX6UL_CLK_USDHC1>, - <&clks IMX6UL_CLK_USDHC1>, - <&clks IMX6UL_CLK_USDHC1>; - clock-names = "ipg", "ahb", "per"; - bus-width = <4>; - fsl,tuning-step= <2>; - status = "disabled"; - }; - - usdhc2: usdhc@02194000 { - compatible = "fsl,imx6ul-usdhc", "fsl,imx6sx-usdhc"; - reg = <0x02194000 0x4000>; - interrupts = ; - clocks = <&clks IMX6UL_CLK_USDHC2>, - <&clks IMX6UL_CLK_USDHC2>, - <&clks IMX6UL_CLK_USDHC2>; - clock-names = "ipg", "ahb", "per"; - bus-width = <4>; - fsl,tuning-step= <2>; - status = "disabled"; - }; - - adc1: adc@02198000 { - compatible = "fsl,imx6ul-adc", "fsl,vf610-adc"; - reg = <0x02198000 0x4000>; - interrupts = ; - clocks = <&clks IMX6UL_CLK_ADC1>; - num-channels = <2>; - clock-names = "adc"; - status = "disabled"; - }; - - i2c1: i2c@021a0000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c"; - reg = <0x021a0000 0x4000>; - interrupts = ; - clocks = <&clks IMX6UL_CLK_I2C1>; - status = "disabled"; - }; - - i2c2: i2c@021a4000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c"; - reg = <0x021a4000 0x4000>; - interrupts = ; - clocks = <&clks IMX6UL_CLK_I2C2>; - status = "disabled"; - }; - - i2c3: i2c@021a8000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c"; - reg = <0x021a8000 0x4000>; - interrupts = ; - clocks = <&clks IMX6UL_CLK_I2C3>; - status = "disabled"; - }; - - romcp@021ac000 { - compatible = "fsl,imx6ul-romcp", "syscon"; - reg = <0x021ac000 0x4000>; - }; - - mmdc: mmdc@021b0000 { - compatible = "fsl,imx6ul-mmdc", "fsl,imx6q-mmdc"; - reg = <0x021b0000 0x4000>; - }; - - weim: weim@021b8000 { - compatible = "fsl,imx6ul-weim", "fsl,imx6q-weim"; - reg = <0x021b8000 0x4000>; - interrupts = ; - clocks = <&clks IMX6UL_CLK_DUMMY>; - }; - - ocotp: ocotp-ctrl@021bc000 { - compatible = "fsl,imx6ull-ocotp", "syscon"; - reg = <0x021bc000 0x4000>; - clocks = <&clks IMX6UL_CLK_OCOTP>; - }; - - csu: csu@021c0000 { - compatible = "fsl,imx6ul-csu"; - reg = <0x021c0000 0x4000>; - interrupts = ; - status = "disabled"; - }; - - csi: csi@021c4000 { - compatible = "fsl,imx6ul-csi", "fsl,imx6s-csi"; - reg = <0x021c4000 0x4000>; - interrupts = ; - clocks = <&clks IMX6UL_CLK_DUMMY>, - <&clks IMX6UL_CLK_CSI>, - <&clks IMX6UL_CLK_DUMMY>; - clock-names = "disp-axi", "csi_mclk", "disp_dcic"; - status = "disabled"; - }; - - lcdif: lcdif@021c8000 { - compatible = "fsl,imx6ul-lcdif", "fsl,imx28-lcdif"; - reg = <0x021c8000 0x4000>; - interrupts = ; - clocks = <&clks IMX6UL_CLK_LCDIF_PIX>, - <&clks IMX6UL_CLK_LCDIF_APB>, - <&clks IMX6UL_CLK_DUMMY>; - clock-names = "pix", "axi", "disp_axi"; - status = "disabled"; - }; - - pxp: pxp@021cc000 { - compatible = "fsl,imx6ull-pxp-dma", "fsl,imx7d-pxp-dma"; - reg = <0x021cc000 0x4000>; - interrupts = , - ; - clocks = <&clks IMX6UL_CLK_DUMMY>, <&clks IMX6UL_CLK_PXP>; - clock-names = "pxp_ipg", "pxp_axi"; - status = "disabled"; - }; - - qspi: qspi@021e0000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx6ull-qspi", "fsl,imx6ul-qspi"; - reg = <0x021e0000 0x4000>, <0x60000000 0x10000000>; - reg-names = "QuadSPI", "QuadSPI-memory"; - interrupts = ; - clocks = <&clks IMX6UL_CLK_QSPI>, - <&clks IMX6UL_CLK_QSPI>; - clock-names = "qspi_en", "qspi"; - status = "disabled"; - }; - - wdog3: wdog@021e4000 { - compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt"; - reg = <0x021e4000 0x4000>; - interrupts = ; - clocks = <&clks IMX6UL_CLK_WDOG3>; - status = "disabled"; - }; - - uart2: serial@021e8000 { - compatible = "fsl,imx6ul-uart", - "fsl,imx6q-uart", "fsl,imx21-uart"; - reg = <0x021e8000 0x4000>; - interrupts = ; - clocks = <&clks IMX6UL_CLK_UART2_IPG>, - <&clks IMX6UL_CLK_UART2_SERIAL>; - clock-names = "ipg", "per"; - dmas = <&sdma 27 4 0>, <&sdma 28 4 0>; - dma-names = "rx", "tx"; - status = "disabled"; - }; - - uart3: serial@021ec000 { - compatible = "fsl,imx6ul-uart", - "fsl,imx6q-uart", "fsl,imx21-uart"; - reg = <0x021ec000 0x4000>; - interrupts = ; - clocks = <&clks IMX6UL_CLK_UART3_IPG>, - <&clks IMX6UL_CLK_UART3_SERIAL>; - clock-names = "ipg", "per"; - dmas = <&sdma 29 4 0>, <&sdma 30 4 0>; - dma-names = "rx", "tx"; - status = "disabled"; - }; - - uart4: serial@021f0000 { - compatible = "fsl,imx6ul-uart", - "fsl,imx6q-uart", "fsl,imx21-uart"; - reg = <0x021f0000 0x4000>; - interrupts = ; - clocks = <&clks IMX6UL_CLK_UART4_IPG>, - <&clks IMX6UL_CLK_UART4_SERIAL>; - clock-names = "ipg", "per"; - dmas = <&sdma 31 4 0>, <&sdma 32 4 0>; - dma-names = "rx", "tx"; - status = "disabled"; - }; - - uart5: serial@021f4000 { - compatible = "fsl,imx6ul-uart", - "fsl,imx6q-uart", "fsl,imx21-uart"; - reg = <0x021f4000 0x4000>; - interrupts = ; - clocks = <&clks IMX6UL_CLK_UART5_IPG>, - <&clks IMX6UL_CLK_UART5_SERIAL>; - clock-names = "ipg", "per"; - dmas = <&sdma 33 4 0>, <&sdma 34 4 0>; - dma-names = "rx", "tx"; - status = "disabled"; - }; - - i2c4: i2c@021f8000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c"; - reg = <0x021f8000 0x4000>; - interrupts = ; - clocks = <&clks IMX6UL_CLK_I2C4>; - status = "disabled"; - }; - - uart6: serial@021fc000 { - compatible = "fsl,imx6ul-uart", - "fsl,imx6q-uart", "fsl,imx21-uart"; - reg = <0x021fc000 0x4000>; - interrupts = ; - clocks = <&clks IMX6UL_CLK_UART6_IPG>, - <&clks IMX6UL_CLK_UART6_SERIAL>; - clock-names = "ipg", "per"; - dmas = <&sdma 0 4 0>, <&sdma 47 4 0>; - dma-names = "rx", "tx"; - status = "disabled"; - }; - }; - - aips3: aips-bus@02200000 { + aips3: aips-bus@2200000 { compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; reg = <0x02200000 0x100000>; ranges; - dcp: dcp@02280000 { + dcp: crypto@2280000 { + compatible = "fsl,imx6ull-dcp", "fsl,imx28-dcp"; reg = <0x02280000 0x4000>; interrupts = , , ; - /*clocks = <&clks IMX6UL_CLK_DCP>;*/ + clocks = <&clks IMX6ULL_CLK_DCP_CLK>; clock-names = "dcp"; - status = "disabled"; }; - rngb: rngb@02284000 { - reg = <0x02284000 0x4000>; - interrupts = ; + iomuxc_snvs: iomuxc-snvs@2290000 { + compatible = "fsl,imx6ull-iomuxc-snvs"; + reg = <0x02290000 0x4000>; }; - uart8: serial@02288000 { + uart8: serial@2288000 { compatible = "fsl,imx6ul-uart", - "fsl,imx6q-uart", "fsl,imx21-uart"; + "fsl,imx6q-uart"; reg = <0x02288000 0x4000>; interrupts = ; clocks = <&clks IMX6UL_CLK_UART8_IPG>, <&clks IMX6UL_CLK_UART8_SERIAL>; clock-names = "ipg", "per"; - dmas = <&sdma 45 4 0>, <&sdma 46 4 0>; - dma-names = "rx", "tx"; status = "disabled"; }; - - epdc: epdc@0228c000 { - compatible = "fsl,imx7d-epdc"; - interrupts = ; - reg = <0x0228c000 0x4000>; - clocks = <&clks IMX6UL_CLK_EPDC_ACLK>, - <&clks IMX6UL_CLK_EPDC_PIX>; - clock-names = "epdc_axi", "epdc_pix"; - /* Need to fix epdc-ram */ - /* epdc-ram = <&gpr 0x4 30>; */ - status = "disabled"; - }; - - iomuxc_snvs: iomuxc-snvs@02290000 { - compatible = "fsl,imx6ull-iomuxc-snvs"; - reg = <0x02290000 0x10000>; - }; - - snvs_gpr: snvs-gpr@0x02294000 { - compatible = "fsl, imx6ull-snvs-gpr"; - reg = <0x02294000 0x10000>; - }; }; }; };