From: Tony Dinh Date: Thu, 3 Feb 2022 22:32:29 +0000 (-0800) Subject: arm: kirkwood: Dockstar : Add DM Ethernet X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=c153576d8dfc80c651a7edb046adbaa1c1c17e42;p=u-boot.git arm: kirkwood: Dockstar : Add DM Ethernet The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh Reviewed-by: Stefan Roese --- diff --git a/board/Seagate/dockstar/dockstar.c b/board/Seagate/dockstar/dockstar.c index fb69193158..d72e3ef24e 100644 --- a/board/Seagate/dockstar/dockstar.c +++ b/board/Seagate/dockstar/dockstar.c @@ -1,5 +1,6 @@ // SPDX-License-Identifier: GPL-2.0+ /* + * Copyright (C) 2022 Tony Dinh * Copyright (C) 2010 Eric C. Cooper * * Based on sheevaplug.c originally written by @@ -11,18 +12,22 @@ #include #include #include -#include -#include +#include #include #include #include #include #include #include -#include "dockstar.h" +#include DECLARE_GLOBAL_DATA_PTR; +#define DOCKSTAR_OE_LOW (~(0)) +#define DOCKSTAR_OE_HIGH (~(0)) +#define DOCKSTAR_OE_VAL_LOW BIT(29) /* USB_PWEN low */ +#define DOCKSTAR_OE_VAL_HIGH BIT(17) /* LED pin high */ + int board_early_init_f(void) { /* @@ -92,6 +97,11 @@ int board_early_init_f(void) return 0; } +int board_eth_init(struct bd_info *bis) +{ + return cpu_eth_init(bis); +} + int board_init(void) { /* @@ -105,53 +115,21 @@ int board_init(void) return 0; } -#ifdef CONFIG_RESET_PHY_R -/* Configure and enable MV88E1116 PHY */ -void reset_phy(void) -{ - u16 reg; - u16 devadr; - char *name = "egiga0"; - - if (miiphy_set_current_dev(name)) - return; - - /* command to read PHY dev address */ - if (miiphy_read(name, 0xEE, 0xEE, (u16 *) &devadr)) { - printf("Err..%s could not read PHY dev address\n", - __FUNCTION__); - return; - } - - /* - * Enable RGMII delay on Tx and Rx for CPU port - * Ref: sec 4.7.2 of chip datasheet - */ - miiphy_write(name, devadr, MV88E1116_PGADR_REG, 2); - miiphy_read(name, devadr, MV88E1116_MAC_CTRL_REG, ®); - reg |= (MV88E1116_RGMII_RXTM_CTRL | MV88E1116_RGMII_TXTM_CTRL); - miiphy_write(name, devadr, MV88E1116_MAC_CTRL_REG, reg); - miiphy_write(name, devadr, MV88E1116_PGADR_REG, 0); - - /* reset the phy */ - miiphy_reset(name, devadr); - - printf("88E1116 Initialized on %s\n", name); -} -#endif /* CONFIG_RESET_PHY_R */ - #if CONFIG_IS_ENABLED(BOOTSTAGE) -#define GREEN_LED (1 << 14) -#define ORANGE_LED (1 << 15) +#define GREEN_LED BIT(14) +#define ORANGE_LED BIT(15) #define BOTH_LEDS (GREEN_LED | ORANGE_LED) #define NEITHER_LED 0 static void set_leds(u32 leds, u32 blinking) { struct kwgpio_registers *r = (struct kwgpio_registers *)MVEBU_GPIO1_BASE; - u32 oe = readl(&r->oe) | BOTH_LEDS; + u32 oe; + u32 bl; + + oe = readl(&r->oe) | BOTH_LEDS; writel(oe & ~leds, &r->oe); /* active low */ - u32 bl = readl(&r->blink_en) & ~BOTH_LEDS; + bl = readl(&r->blink_en) & ~BOTH_LEDS; writel(bl | blinking, &r->blink_en); } diff --git a/board/Seagate/dockstar/dockstar.h b/board/Seagate/dockstar/dockstar.h deleted file mode 100644 index cbb1644476..0000000000 --- a/board/Seagate/dockstar/dockstar.h +++ /dev/null @@ -1,27 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2010 Eric C. Cooper - * - * Based on sheevaplug.h originally written by - * Prafulla Wadaskar - * (C) Copyright 2009 - * Marvell Semiconductor - */ - -#ifndef __DOCKSTAR_H -#define __DOCKSTAR_H - -#define DOCKSTAR_OE_LOW (~(0)) -#define DOCKSTAR_OE_HIGH (~(0)) -#define DOCKSTAR_OE_VAL_LOW (1 << 29) /* USB_PWEN low */ -#define DOCKSTAR_OE_VAL_HIGH (1 << 17) /* LED pin high */ - -/* PHY related */ -#define MV88E1116_LED_FCTRL_REG 10 -#define MV88E1116_CPRSP_CR3_REG 21 -#define MV88E1116_MAC_CTRL_REG 21 -#define MV88E1116_PGADR_REG 22 -#define MV88E1116_RGMII_TXTM_CTRL (1 << 4) -#define MV88E1116_RGMII_RXTM_CTRL (1 << 5) - -#endif /* __DOCKSTAR_H */ diff --git a/configs/dockstar_defconfig b/configs/dockstar_defconfig index 6c89a9a6fb..cbc2bf6f80 100644 --- a/configs/dockstar_defconfig +++ b/configs/dockstar_defconfig @@ -2,6 +2,7 @@ CONFIG_ARM=y CONFIG_SKIP_LOWLEVEL_INIT=y CONFIG_SYS_DCACHE_OFF=y CONFIG_ARCH_CPU_INIT=y +CONFIG_SYS_THUMB_BUILD=y CONFIG_ARCH_KIRKWOOD=y CONFIG_SYS_KWD_CONFIG="board/Seagate/dockstar/kwbimage.cfg" CONFIG_SYS_TEXT_BASE=0x600000 @@ -18,6 +19,7 @@ CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="setenv bootargs ${console} ${mtdparts} ${bootargs_root}; ubi part root; ubifsmount ubi:root; ubifsload 0x800000 ${kernel}; ubifsload 0x1100000 ${initrd}; bootm 0x800000 0x1100000" CONFIG_USE_PREBOOT=y # CONFIG_DISPLAY_BOARDINFO is not set +CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="DockStar> " # CONFIG_CMD_FLASH is not set CONFIG_CMD_NAND=y @@ -36,11 +38,14 @@ CONFIG_ISO_PARTITION=y CONFIG_OF_CONTROL=y CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_NAND=y +CONFIG_NET_RANDOM_ETHADDR=y CONFIG_NETCONSOLE=y CONFIG_DM=y # CONFIG_MMC is not set CONFIG_MTD=y CONFIG_MTD_RAW_NAND=y +CONFIG_PHY_MARVELL=y +CONFIG_DM_ETH=y CONFIG_MVGBE=y CONFIG_MII=y CONFIG_SYS_NS16550=y diff --git a/include/configs/dockstar.h b/include/configs/dockstar.h index 0ad04eee1b..736c724736 100644 --- a/include/configs/dockstar.h +++ b/include/configs/dockstar.h @@ -1,5 +1,6 @@ /* SPDX-License-Identifier: GPL-2.0+ */ /* + * Copyright (C) 2022 Tony Dinh * Copyright (C) 2010 Eric C. Cooper * * Based on sheevaplug.h originally written by @@ -17,14 +18,6 @@ */ #include "mv-common.h" -/* - * Environment variables configurations - */ -/* - * max 4k env size is enough, but in case of nand - * it has to be rounded to sector size - */ - /* * Default environment variables */ @@ -32,7 +25,7 @@ #define CONFIG_EXTRA_ENV_SETTINGS \ "console=console=ttyS0,115200\0" \ "mtdids=nand0=orion_nand\0" \ - "mtdparts="CONFIG_MTDPARTS_DEFAULT \ + "mtdparts=" CONFIG_MTDPARTS_DEFAULT \ "kernel=/boot/uImage\0" \ "initrd=/boot/uInitrd\0" \ "bootargs_root=ubi.mtd=1 root=ubi0:root rootfstype=ubifs ro\0" @@ -40,13 +33,10 @@ /* * Ethernet Driver configuration */ -#ifdef CONFIG_CMD_NET #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ #define CONFIG_PHY_BASE_ADR 0 -#endif /* CONFIG_CMD_NET */ - -/* - * File system - */ +#ifdef CONFIG_RESET_PHY_R +#undef CONFIG_RESET_PHY_R /* remove legacy reset_phy() */ +#endif #endif /* _CONFIG_DOCKSTAR_H */