From: Stefan Agner Date: Tue, 17 Oct 2017 11:59:19 +0000 (+0200) Subject: configs: vf610: increase maximum size and enforce correct limit X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=c0f432c377805b57d67c09b0f7374d5c6510b09c;p=u-boot.git configs: vf610: increase maximum size and enforce correct limit On Vybrid SoCs U-Boot gets loaded into GFX SRAM which is 512KiB. Currently 32KiB is reserved for the IMX header. However, this is not reflected in the size limit. In v2017.11-rc2 the actual size limit (512KiB-32KiB) has been reached for Colibri VF61, which lead to a successful build of U-Boot but not a working binary. The IMX header is much smaller than 32KiB, typically around 1KiB. Decrease the reserved size to 4KiB and specify the correct U-Boot size limit. Apply this new base address and limit for all Vybrid based boards. Signed-off-by: Stefan Agner --- diff --git a/include/configs/colibri_vf.h b/include/configs/colibri_vf.h index 8166aa4afb..bf3bbffe24 100644 --- a/include/configs/colibri_vf.h +++ b/include/configs/colibri_vf.h @@ -75,8 +75,8 @@ #define CONFIG_FDTADDR 0x84000000 /* We boot from the gfxRAM area of the OCRAM. */ -#define CONFIG_SYS_TEXT_BASE 0x3f408000 -#define CONFIG_BOARD_SIZE_LIMIT 524288 +#define CONFIG_SYS_TEXT_BASE 0x3f401000 +#define CONFIG_BOARD_SIZE_LIMIT 520192 #define SD_BOOTCMD \ "sdargs=root=/dev/mmcblk0p2 rw rootwait\0" \ diff --git a/include/configs/pcm052.h b/include/configs/pcm052.h index 8144a83db2..060928bd30 100644 --- a/include/configs/pcm052.h +++ b/include/configs/pcm052.h @@ -89,8 +89,8 @@ #define CONFIG_LOADADDR 0x82000000 /* We boot from the gfxRAM area of the OCRAM. */ -#define CONFIG_SYS_TEXT_BASE 0x3f408000 -#define CONFIG_BOARD_SIZE_LIMIT 524288 +#define CONFIG_SYS_TEXT_BASE 0x3f401000 +#define CONFIG_BOARD_SIZE_LIMIT 520192 /* if no target-specific extra environment settings were defined by the target, define an empty one */ diff --git a/include/configs/vf610twr.h b/include/configs/vf610twr.h index 3430f27c40..ddfcd6f618 100644 --- a/include/configs/vf610twr.h +++ b/include/configs/vf610twr.h @@ -79,8 +79,8 @@ #define CONFIG_SYS_LOAD_ADDR 0x82000000 /* We boot from the gfxRAM area of the OCRAM. */ -#define CONFIG_SYS_TEXT_BASE 0x3f408000 -#define CONFIG_BOARD_SIZE_LIMIT 524288 +#define CONFIG_SYS_TEXT_BASE 0x3f401000 +#define CONFIG_BOARD_SIZE_LIMIT 520192 /* * We do have 128MB of memory on the Vybrid Tower board. Leave the last